The DOI matches its Crossref record; 103 of the 103 references it cites were found in a registry or an index.
Plasma electrolytic oxidation of magnesium and its alloys: Mechanism, properties and applications
Open accessAbstract
Plasma Electrolyte Oxidation (PEO) process has increasingly been employed to improve magnesium surface properties by fabrication of an MgO-based coating. Originating from conventional anodizing procedures, this high-voltage process produces an adhesive ceramic film on the surface. The present article provides a comprehensive review around mechanisms of PEO coatings fabrication and their different properties. Due to complexity of PEO coatings formation, a complete explanation regarding fabrication mechanisms of PEO coatings has not yet been proposed; however, the most important advancements in the field of fabrication mechanisms of PEO coatings were gathered in this work. Mechanisms of PEO coatings fabrication on magnesium were reviewed considering voltage–time plots, optical spectrometry, acoustic emission spectrometry and electronic properties of the ceramic film. Afterwards, the coatings properties, affecting parameters and improvement strategies were discussed. In addition, corrosion resistance of coatings, important factors in corrosion resistance and methods for corrosion resistance improvement were considered. Tribological properties (important factors and improvement methods) of coatings were also studied. Since magnesium and its alloys are broadly used in biological applications, the biological properties of PEO coatings, important factors in their biological performance and existing methods for improvement of coatings were explained. Addition of ceramic based nanoparticles and formation of nanocomposite coatings may considerably influence properties of plasma electrolyte oxidation coatings. Nanocomposite coatings properties and nanoparticles adsorption mechanisms were included in a separate sector. Another method to improve coatings properties is formation of hybrid coatings on PEO coatings which was discussed in the end.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Bioceramics: From Concept to Clinic
Hench, L. L. (1991) · Journal of the American Ceramic Society · doi:10.1111/j.1151-2916.1991.tb07132.x · Cited by 4,977
Antimicrobial effects of silver nanoparticles
Kim, J. S., Kuk, E., Yu, K. N., Kim, J.-H., Park, S. J., Lee, H. J., Kim, S. H., Park, Y. K., Park, Y. H., Hwang, C.-Y., et al. (2007) · Nanomedicine: Nanotechnology, Biology and Medicine · doi:10.1016/j.nano.2006.12.001 · Cited by 4,918
Protective coatings on magnesium and its alloys — a critical review
Gray, J. E., & Luan, B. (2002) · Journal of Alloys and Compounds · doi:10.1016/s0925-8388(01)01899-0 · Cited by 2,525
In vivo corrosion of four magnesium alloys and the associated bone response
Witte, F., Kaese, V., Haferkamp, H., Switzer, E., Meyer-Lindenberg, A., Wirth, C. J., & Windhagen, H. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2004.09.049 · Cited by 2,395
Corrosion Mechanisms of Magnesium Alloys
Song, G. L., & Atrens, A. (1999) · Advanced Engineering Materials · doi:10.1002/(sici)1527-2648(199909)1:1<11::aid-adem11>3.0.co;2-n · Cited by 2,365
The history of biodegradable magnesium implants: A review☆
Witte, F. (2010) · Acta Biomaterialia · doi:10.1016/j.actbio.2010.02.028 · Cited by 1,860
Electrochemistry at Semiconductor and Oxidized Metal Electrodes
Morrison, S. R. (1980) · Springer eBooks · doi:10.1007/978-1-4613-3144-5 · Cited by 1,665
Development of new metallic alloys for biomedical applications
Niinomi, M., Nakai, M., & Hieda, J. (2012) · Acta Biomaterialia · doi:10.1016/j.actbio.2012.06.037 · Cited by 1,623
The development of binary Mg–Ca alloys for use as biodegradable materials within bone
Li, Z., Gu, X., Lou, S., & Zheng, Y. (2008) · Biomaterials · doi:10.1016/j.biomaterials.2007.12.021 · Cited by 1,593
Control of biodegradation of biocompatable magnesium alloys
Song, G. (2007) · Corrosion Science · doi:10.1016/j.corsci.2007.01.001 · Cited by 1,514
Saris, N.-E. L., Mervaala, E., Karppanen, H., Khawaja, J. A., & Lewenstam, A. (2000) · Clinica Chimica Acta · doi:10.1016/s0009-8981(99)00258-2 · Cited by 1,366
A Point Defect Model for Anodic Passive Films: I . Film Growth Kinetics
Chao, C. Y., Lin, L. F., & Macdonald, D. D. (1981) · Journal of The Electrochemical Society · doi:10.1149/1.2127591 · Cited by 894
Coronary stents: A materials perspective
Mani, G., Feldman, M. D., Patel, D., & Agrawal, C. M. (2007) · Biomaterials · doi:10.1016/j.biomaterials.2006.11.042 · Cited by 866
Cao, W., & Hench, L. L. (1996) · Ceramics International · doi:10.1016/0272-8842(95)00126-3 · Cited by 836
Biomaterials: a forecast for the future
Hench, L. L. (1998) · Biomaterials · doi:10.1016/s0142-9612(98)00133-1 · Cited by 778
Paital, S. R., & Dahotre, N. B. (2009) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2009.05.001 · Cited by 673
Magnesium: nutrition and metabolism
Vormann, J. (2003) · Molecular Aspects of Medicine · doi:10.1016/s0098-2997(02)00089-4 · Cited by 671
Stability, reactivity and breakdown of passive films. Problems of recent and future research
Schultze, J. W., & Lohrengel, M. M. (2000) · Electrochimica Acta · doi:10.1016/s0013-4686(00)00347-9 · Cited by 671
Calcium phosphate coatings on magnesium alloys for biomedical applications: A review
Shadanbaz, S., & Dias, G. J. (2012) · Acta Biomaterialia · doi:10.1016/j.actbio.2011.10.016 · Cited by 651
Tanahashi, M., & Matsuda, T. (1997) · Journal of Biomedical Materials Research · doi:10.1002/(sici)1097-4636(19970305)34:3<305::aid-jbm5>3.0.co;2-o · Cited by 645
Sankara Narayanan, T. S. N., Park, I. S., & Lee, M. H. (2014) · Progress in Materials Science · doi:10.1016/j.pmatsci.2013.08.002 · Cited by 639
Role of Magnesium in Genomic Stability
Hartwig, A. (2001) · Mutation Research - Fundamental and Molecular Mechanisms of Mutagenesis · doi:10.1016/s0027-5107(01)00074-4 · Cited by 625
Developments in metallic biodegradable stents☆
Hermawan, H., Dubé, D., & Mantovani, D. (2010) · Acta Biomaterialia · doi:10.1016/j.actbio.2009.10.006 · Cited by 604
Injectable biodegradable materials for orthopedic tissue engineering
Temenoff, J. S., & Mikos, A. G. (2000) · Biomaterials · doi:10.1016/s0142-9612(00)00108-3 · Cited by 554
Theoretical analysis of calcium phosphate precipitation in simulated body fluid
Lu, X., & Leng, Y. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2004.05.034 · Cited by 547
Blawert, C., Dietzel, W., GHALI, E. L., et al. (2006) · Advanced Engineering Materials · doi:10.1002/adem.200500257 · Cited by 510
A Possible Biodegradable Magnesium Implant Material
Song, G., & Song, S. (2007) · Advanced Engineering Materials · doi:10.1002/adem.200600252 · Cited by 487
Electrochemical corrosion behavior of composite coatings of sealed MAO film on magnesium alloy AZ91D
Duan, H., Du, K., Yan, C., & Wang, F. (2006) · Electrochimica Acta · doi:10.1016/j.electacta.2005.08.026 · Cited by 441
Biodegradable behaviors of AZ31 magnesium alloy in simulated body fluid
Song, Y., Shan, D., Chen, R., Zhang, F., & Han, E.-H. (2009) · Materials Science and Engineering: C · doi:10.1016/j.msec.2008.08.026 · Cited by 394
Corrosion resistance and surface biocompatibility of a microarc oxidation coating on a Mg–Ca alloy
Gu, X. N., Li, N., Zhou, W. R., Zheng, Y. F., Zhao, X., Cai, Q. Z., & Ruan, L. (2011) · Acta Biomaterialia · doi:10.1016/j.actbio.2010.11.034 · Cited by 383
Lim, T. S., Ryu, H. S., & Hong, S.-H. (2012) · Corrosion Science · doi:10.1016/j.corsci.2012.04.043 · Cited by 372
Fe–Mn alloys for metallic biodegradable stents: Degradation and cell viability studies☆
Hermawan, H., Purnama, A., Dube, D., Couet, J., & Mantovani, D. (2010) · Acta Biomaterialia · doi:10.1016/j.actbio.2009.11.025 · Cited by 372
Effect of inorganic salts, amino acids and proteins on the degradation of pure magnesium in vitro
Yamamoto, A., & Hiromoto, S. (2009) · Materials Science and Engineering: C · doi:10.1016/j.msec.2008.12.015 · Cited by 368
Characterization of AC PEO coatings on magnesium alloys
Arrabal, R., Matykina, E., Hashimoto, T., Skeldon, P., & Thompson, G. E. (2009) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2009.02.011 · Cited by 367
Wen, C., Guan, S., Peng, L., Ren, C., Wang, X., & Hu, Z. (2009) · Applied Surface Science · doi:10.1016/j.apsusc.2008.09.078 · Cited by 312
Mg–Zr–Sr alloys as biodegradable implant materials
Li, Y., Wen, C., Mushahary, D., Sravanthi, R., Harishankar, N., Pande, G., & Hodgson, P. (2012) · Acta Biomaterialia · doi:10.1016/j.actbio.2012.04.028 · Cited by 309
Liang, J., Srinivasan, P. B., Blawert, C., Störmer, M., & Dietzel, W. (2009) · Electrochimica Acta · doi:10.1016/j.electacta.2009.02.004 · Cited by 306
Corrosion resistance of WE43 and AZ91D magnesium alloys with phosphate PEO coatings
Arrabal, R., Matykina, E., Viejo, F., Skeldon, P., & Thompson, G. E. (2008) · Corrosion Science · doi:10.1016/j.corsci.2008.03.002 · Cited by 305
Ao, C. H., & Lee, S. C. (2005) · Chemical Engineering Science · doi:10.1016/j.ces.2004.01.073 · Cited by 297
On the Interpretation of Mott‐Schottky Plots Determined at Semiconductor/Electrolyte Systems
Gryse, R. D., Gomes, W. P., Cardon, F., et al. (1975) · Journal of The Electrochemical Society · doi:10.1149/1.2134298 · Cited by 297
Plasma electrolytic oxidation coatings on Mg alloy with addition of SiO2 particles
Lu, X., Blawert, C., Huang, Y., Ovri, H., Zheludkevich, M. L., & Kainer, K. U. (2015) · Electrochimica Acta · doi:10.1016/j.electacta.2015.11.033 · Cited by 295
Corrosion of AZ91D magnesium alloy with a chemical conversion coating and electroless nickel layer
Huo, H., Li, Y., & Wang, F. (2003) · Corrosion Science · doi:10.1016/j.corsci.2003.09.023 · Cited by 290
Toworfe, G. K., Composto, R. J., Shapiro, I. M., & Ducheyne, P. (2006) · Biomaterials · doi:10.1016/j.biomaterials.2005.06.017 · Cited by 287
Bornapour, M., Muja, N., Shum-Tim, D., Cerruti, M., & Pekguleryuz, M. (2013) · Acta Biomaterialia · doi:10.1016/j.actbio.2012.07.045 · Cited by 287
O’Brien, B., & Carroll, W. (2008) · Acta Biomaterialia · doi:10.1016/j.actbio.2008.11.012 · Cited by 275
Liang, J., Srinivasan, P. B., Blawert, C., & Dietzel, W. (2009) · Corrosion Science · doi:10.1016/j.corsci.2009.06.034 · Cited by 267
Formation of biologically active bone-like apatite on metals and polymers by a biomimetic process
Kokubo, T. (1996) · Thermochimica Acta · doi:10.1016/0040-6031(95)02784-x · Cited by 254
Liu, X., Ding, C., & Wang, Z. (2001) · Biomaterials · doi:10.1016/s0142-9612(00)00386-0 · Cited by 226
Bala Srinivasan, P., Liang, J., Blawert, C., Störmer, M., & Dietzel, W. (2009) · Applied Surface Science · doi:10.1016/j.apsusc.2008.11.008 · Cited by 222
Lin, X., Tan, L., Zhang, Q., Yang, K., Hu, Z., Qiu, J., & Cai, Y. (2013) · Acta Biomaterialia · doi:10.1016/j.actbio.2012.12.016 · Cited by 216
Shi, P., Ng, W. F., Wong, M. H., & Cheng, F. T. (2009) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2008.01.102 · Cited by 215
Shi, D. (2005) · CO-PUBLISHED WITH TSINGHUA UNIVERSITY PRESS eBooks · doi:10.1142/6002 · Cited by 214
Growth and characterization of Mg(OH)2 film on magnesium alloy AZ31
Zhu, Y., Wu, G., Zhang, Y.-H., & Zhao, Q. (2011) · Applied Surface Science · doi:10.1016/j.apsusc.2011.02.017 · Cited by 210
Sreekanth, D., Rameshbabu, N., & Venkateswarlu, K. (2012) · Ceramics International · doi:10.1016/j.ceramint.2012.02.040 · Cited by 206
Lee, K. M., Shin, K. R., Namgung, S., Yoo, B., & Shin, D. H. (2011) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2011.01.033 · Cited by 199
Khaselev, O., Weiss, D., & Yahalom, J. (2001) · Corrosion Science · doi:10.1016/s0010-938x(00)00116-5 · Cited by 199
Influence of Ca on the corrosion properties of magnesium for biomaterials
Kim, W.-C., Kim, J.-G., Lee, J.-Y., & Seok, H.-K. (2008) · Materials Letters · doi:10.1016/j.matlet.2008.06.028 · Cited by 195
Hussein, R. O., Northwood, D. O., & Nie, X. (2013) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2013.09.021 · Cited by 194
Wu, C., Ramaswamy, Y., Zhu, Y., Zheng, R., Appleyard, R., Howard, A., & Zreiqat, H. (2009) · Biomaterials · doi:10.1016/j.biomaterials.2009.01.029 · Cited by 192
Aluminum as a risk factor for Alzheimer's disease
Ferreira, P. C., Piai, K. D. A., Takayanagui, A. M. M., & Segura-Muñoz, S. I. (2008) · Revista Latino-Americana de Enfermagem · doi:10.1590/s0104-11692008000100023 · Cited by 188
Li, J., Song, Y., Zhang, S., Zhao, C., Zhang, F., Zhang, X., Cao, L., Fan, Q., & Tang, T. (2010) · Biomaterials · doi:10.1016/j.biomaterials.2010.04.023 · Cited by 185
Shang, W., Chen, B., Shi, X., Chen, Y., & Xiao, X. (2009) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2008.06.135 · Cited by 184
Moravej, M., Purnama, A., Fiset, M., Couet, J., & Mantovani, D. (2010) · Acta Biomaterialia · doi:10.1016/j.actbio.2010.01.008 · Cited by 184
AC plasma electrolytic oxidation of magnesium with zirconia nanoparticles
Arrabal, R., Matykina, E., Viejo, F., Skeldon, P., Thompson, G. E., & Merino, M. C. (2008) · Applied Surface Science · doi:10.1016/j.apsusc.2008.04.100 · Cited by 165
Tomozawa, M., & Hiromoto, S. (2011) · Applied Surface Science · doi:10.1016/j.apsusc.2011.04.087 · Cited by 146
Srinivasan, P. B., Liang, J. Y., Balajeee, R. G., et al. (2010) · Applied Surface Science · doi:10.1016/j.apsusc.2010.01.052 · Cited by 135
Bioactive calcium phosphate coating formed on micro-arc oxidized magnesium by chemical deposition
Liu, G. Y., Hu, J., Ding, Z. K., & Wang, C. (2010) · Applied Surface Science · doi:10.1016/j.apsusc.2010.09.050 · Cited by 130
Adjustment of the ratio of Ca/P in the ceramic coating on Mg alloy by plasma electrolytic oxidation
Yao, Z., Li, L., & Jiang, Z. (2009) · Applied Surface Science · doi:10.1016/j.apsusc.2009.02.082 · Cited by 128
Luo, H., Cai, Q., Wei, B., Yu, B., Li, D., He, J., & Liu, Z. (2007) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2007.10.072 · Cited by 125
The Effect of Magnesium Ions on Bone Bonding to Hydroxyapatite Coating on Titanium Alloy Implants
Revell, P. A., Damien, E., Zhang, X. S., Evans, P. J., & Howlett, C. R. (2003) · Key engineering materials · doi:10.4028/www.scientific.net/kem.254-256.447 · Cited by 119
The biology of fracture healing: optimising outcome
Marsh, D., & Li, G. (1999) · British Medical Bulletin · doi:10.1258/0007142991902673 · Cited by 119
Lee, K. M., Lee, B. U., Yoon, S. I., Lee, E. S., Yoo, B., & Shin, D. H. (2012) · Electrochimica Acta · doi:10.1016/j.electacta.2012.01.053 · Cited by 116
Lu, P., Cao, L., Liu, Y., Xu, X., & Wu, X. (2010) · Journal of Biomedical Materials Research Part B Applied Biomaterials · doi:10.1002/jbm.b.31744 · Cited by 110
Surface modification of an Mg-1Ca alloy to slow down its biocorrosion by chitosan
Gu, X., Zheng, Y., Lan, Q., Cheng, Y., Zhang, Z., Xi, T., & ZHANG, D. (2009) · Biomedical Materials · doi:10.1088/1748-6041/4/4/044109 · Cited by 109
Electroless Ni–P layer with a chromium-free pretreatment on AZ91D magnesium alloy
Zhang, W. X., He, J., Jiang, Z., Jiang, Q., & Lian, J. (2006) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2006.09.312 · Cited by 98
Bai, K., Zhang, Y., Fu, Z., Zhang, C., Cui, X., Meng, E., Guan, S., & Hu, J. (2011) · Materials Letters · doi:10.1016/j.matlet.2011.12.102 · Cited by 96
Effect of Silicon Supplement on Osteopenia Induced by Ovariectomy in Rats
Rico, H., Gallego-Lago, J. L., Hernández, E. R., Villa, L. F., Sanchez-Atrio, A. I., Seco, C., & Gervás, J. J. (2000) · Calcified Tissue International · doi:10.1007/s002230050010 · Cited by 92
Srinivasan, P. B., Liang, J. Y., Blawert, C., Störmer, M., & Dietzel, W. (2010) · Applied Surface Science · doi:10.1016/j.apsusc.2010.01.069 · Cited by 92
Preparation and properties of composite MAO/ECD coatings on magnesium alloy
Zhao, Q., Guo, X., Dang, X., Hao, J., Lai, J., & Wang, K. (2012) · Colloids and Surfaces B Biointerfaces · doi:10.1016/j.colsurfb.2012.07.040 · Cited by 90
Preparation and bioactivity of micro-arc oxidized calcium phosphate coatings
Pan, Y., Chen, C. Z., Wang, D. G., & Lin, Z. (2013) · Materials Chemistry and Physics · doi:10.1016/j.matchemphys.2013.06.013 · Cited by 88
Velikokhatnyi, O. I., & Kumta, P. N. (2009) · Acta Biomaterialia · doi:10.1016/j.actbio.2009.08.016 · Cited by 86
Influence of apatite seeds on the synthesis of calcium phosphate cement
Yang, Q., Troczynski, T., & Liu, D. (2002) · Biomaterials · doi:10.1016/s0142-9612(02)00010-8 · Cited by 84
Liu, G., Tang, S., Li, D., & Hu, J. (2013) · Corrosion Science · doi:10.1016/j.corsci.2013.11.011 · Cited by 80
Chen, S., Guan, S., Li, W., Wang, H., Chen, J., Wang, Y.-S., & Wang, H. (2011) · Journal of Biomedical Materials Research Part B Applied Biomaterials · doi:10.1002/jbm.b.31982 · Cited by 77
Boinet, M., Verdier, S., Maximovitch, S., & Dalard, F. (2005) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2004.10.145 · Cited by 67
Yang, X., Li, M., Lin, X. Y., Tan, L., Lan, G., Li, L., Yin, Q., Xia, H., Zhang, Y., & Yang, K. (2013) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2013.01.052 · Cited by 64
Koleini, S., Idris, M. H., & Jafari, H. (2011) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2011.06.063 · Cited by 64
Anticorrosion and cytocompatibility behavior of MAO/PLLA modified magnesium alloy WE42
Guo, M., Cao, L., Lu, P., Liu, Y., & Xu, X. (2011) · Journal of Materials Science Materials in Medicine · doi:10.1007/s10856-011-4354-z · Cited by 64
TiO2 Deposition on AZ31 Magnesium Alloy Using Plasma Electrolytic Oxidation
White, L., Koo, Y., Yun, Y., & Sankar, J. (2013) · Journal of Nanomaterials · doi:10.1155/2013/319437 · Cited by 58
Fabrication and characterization of bioactive composite coatings on Mg–Zn–Ca alloy by MAO/sol–gel
Gao, J. H., Shi, X., Yang, B., Hou, S., Meng, E., Guan, F., & Guan, S. (2011) · Journal of Materials Science Materials in Medicine · doi:10.1007/s10856-011-4349-9 · Cited by 56
Biodegradable polymer for sealing porous PEO layer on pure magnesium: An in vitro degradation study
Alabbasi, A., Mehjabeen, A., Kannan, M. B., Ye, Q., & Blawert, C. (2014) · Applied Surface Science · doi:10.1016/j.apsusc.2014.02.100 · Cited by 54
Chen, W., Wang, Z., Sun, L., & Lu, S. (2015) · Journal of Magnesium and Alloys · doi:10.1016/j.jma.2015.07.003 · Cited by 54
Zhu, F., Wang, J., Li, S., & Zhang, J. (2012) · Applied Surface Science · doi:10.1016/j.apsusc.2012.05.135 · Cited by 52
Zhang, S. F., Zhang, R. F., Li, W., Li, M. S., & Guoming, Y. A. N. G. (2012) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2012.06.056 · Cited by 50
Quantitative X-Ray Photoelectron Spectroscopy Characterization of Magnesium Oxidized in Air
Asami, K., & Ono, S. (2000) · Journal of The Electrochemical Society · doi:10.1149/1.1393369 · Cited by 47
Jang, Y.-S., Tan, Z., Jurey, C., Collins, B., Badve, A., Dong, Z., Park, C.-H., Kim, C. S., Sankar, J., & Yun, Y. (2014) · Materials Science and Engineering C · doi:10.1016/j.msec.2014.08.052 · Cited by 46
Formation mechanism of calcium phosphate coating on micro-arc oxidized magnesium
Liu, G. Y., Hu, J., Ding, Z. K., & Wang, C. (2011) · Materials Chemistry and Physics · doi:10.1016/j.matchemphys.2011.08.043 · Cited by 43
Influence of additives on microstructure and property of microarc oxidized Mg–Si–O coatings
Pan, Y., Chen, C. Z., Wang, D. G., Yu, X., & Lin, Z. (2012) · Ceramics International · doi:10.1016/j.ceramint.2012.03.068 · Cited by 40
Liu, F., Yu, J., Song, Y., Shan, D., & Han, E. (2015) · Materials Chemistry and Physics · doi:10.1016/j.matchemphys.2015.06.014 · Cited by 39
Electrochemical behavior of biocompatible AZ31 magnesium alloy in simulated body fluid
Zhang, J., Gu, Y., Guo, Y., & Ning, C. (2012) · Journal of Materials Science · doi:10.1007/s10853-012-6403-5 · Cited by 36
Wang, H. M., Chen, Z. H., & Li, L. L. (2009) · Surface Engineering · doi:10.1179/026708410x12506873242822 · Cited by 32
In vivoassessment of odour retention in an antimicrobial silver chloride-treated polyester textile
McQueen, R. H., Keelan, M., Xu, Y., & Mah, T. (2012) · Journal of the Textile Institute · doi:10.1080/00405000.2012.697623 · Cited by 27
Seyfoori, A., Mirdamadi, S., Mehrjoo, M., & Khavandi, A. (2013) · Progress in Natural Science Materials International · doi:10.1016/j.pnsc.2013.06.008 · Cited by 22
Cited by
Barati Darband, G., Aliofkhazraei, M., Khorsand, S., Sokhanvar, S., & Kaboli, A. (2020) · Arabian Journal of Chemistry · doi:10.1016/j.arabjc.2018.01.013 · Cited by 482
Self-citationRakoch, A. G., Monakhova, E. P., Khabibullina, Z. V., Serdechnova, M., Blawert, C., Zheludkevich, M. L., & Gladkova, A. A. (2020) · Journal of Magnesium and Alloys · doi:10.1016/j.jma.2020.06.002 · Cited by 134
Zhang, D., Cheng, S., Tan, J., Xie, J., Zhang, Y., Chen, S., Du, H., Qian, S., Qiao, Y., Peng, F., et al. (2022) · Bioactive Materials · doi:10.1016/j.bioactmat.2022.01.032 · Cited by 79
Metadata
- Authors
- Barati Darband, G., Aliofkhazraei, M., Hamghalam, P., & Valizade, N.
- Venue
- Journal of Magnesium and Alloys
- Publisher
- Elsevier BV
- Published
- 2017-03
- Volume
- 5
- Issue
- 1
- Pages
- 74-132
- ISSN
- 2213-9567 (ISSN-L)
- OpenAlex
- W2601764143
- Cited by
- 594
- References
- 103
- FWCI
- 14.09
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.