The DOI matches its Crossref record; 75 of the 75 references it cites were found in a registry or an index.
Recent progress and perspectives in additive manufacturing of magnesium alloys
Open accessAbstract
Magnesium alloys remain critical in the context of light-weighting and advanced devices. The increased utilisation of magnesium (Mg) each year reveals growing demand for its Mg-based alloys. Additive manufacturing (AM) provides the possibility to directly manufacture components in net-shape, providing new possibilities and applications for the use of Mg-alloys, and new prospects in the utilisation of novel physical structures made possible from ‘3D printing’. The review herein seeks to holistically explore the additive manufacturing of Mg-alloys to date, including a synopsis of processes used and properties measured (with a comparison to conventionally prepared Mg-alloys). The challenges and possibilities of AM Mg-alloys are critically elaborated for the field of mechanical metallurgy.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Journal of Physics: Conference Series
(2013) · Journal of Physics Conference Series · doi:10.1088/issn.1742-6596 · Cited by 15,679
Additive manufacturing of metallic components – Process, structure and properties
DebRoy, T., Wei, H. L., Zuback, J. S., Mukherjee, T., Elmer, J. W., Milewski, J. O., Beese, A. M., Wilson-Heid, A., De, A., & Zhang, W. (2018) · Progress in Materials Science · doi:10.1016/j.pmatsci.2017.10.001 · Cited by 8,805
Additive Manufacturing Technologies: Rapid Prototyping to Direct Digital Manufacturing
Gibson, I., Rosen, D. W., & Stucker, B. (2010) · National University of Singapore · doi:10.1007/978-1-4419-1120-9 · Cited by 2,969
3D printing of high-strength aluminium alloys
Martin, J. H., Yahata, B. D., Hundley, J. M., Mayer, J. A., Schaedler, T. A., & Pollock, T. M. (2017) · Nature · doi:10.1038/nature23894 · Cited by 2,950
Additively manufactured hierarchical stainless steels with high strength and ductility
Wang, Y. M., Voisin, T., McKeown, J. T., Ye, J., Calta, N. P., Li, Z., Zeng, Z., Zhang, Y., Chen, W., Roehling, T. T., et al. (2018) · Nature Materials · doi:10.1038/nmat5021 · Cited by 2,613
Self-citationZheng, Y. F., Gu, X. N., & Witte, F. (2014) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2014.01.001 · Cited by 2,436
Fundamentals and advances in magnesium alloy corrosion
Esmaily, M., Svensson, J. E., Fajardo, S., Birbilis, N., Frankel, G. S., Virtanen, S., Arrabal, R., Thomas, S., & Johansson, L. G. (2017) · Progress in Materials Science · doi:10.1016/j.pmatsci.2017.04.011 · Cited by 2,073
Self-citationHeidarzadeh, A., Mironov, S., Kaibyshev, R., Çam, G., Simar, A., Gerlich, A., Khodabakhshi, F., Mostafaei, A., Field, D. P., Robson, J. D., et al. (2021) · Progress in Materials Science · doi:10.1016/j.pmatsci.2020.100752 · Cited by 1,048
Grain structure control during metal 3D printing by high-intensity ultrasound
Todaro, C. J., Easton, M. A., Qiu, D., Zhang, D., Bermingham, M. J., Lui, E. W., Brandt, M., StJohn, D. H., & Qian, M. (2020) · Nature Communications · doi:10.1038/s41467-019-13874-z · Cited by 848
In situ X-ray imaging of defect and molten pool dynamics in laser additive manufacturing
Leung, C. L. A., Marussi, S., Atwood, R. C., Towrie, M., Withers, P. J., & Lee, P. D. (2018) · Nature Communications · doi:10.1038/s41467-018-03734-7 · Cited by 817
Design of biodegradable, implantable devices towards clinical translation
Li, C., Guo, C., Fitzpatrick, V., Ibrahim, A., Zwierstra, M. J., Hanna, P., Lechtig, A., Nazarian, A., Lin, S. J., & Kaplan, D. L. (2019) · Nature Reviews Materials · doi:10.1038/s41578-019-0150-z · Cited by 808
Grain refinement of magnesium alloys
StJohn, D. H., Qian, M., Easton, M. A., Cao, P., & Hildebrand, Z. (2005) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-005-0030-6 · Cited by 695
Overview of advancement and development trend on magnesium alloy
Xu, T., Yang, Y., Peng, X., Song, J., & Pan, F. (2019) · Journal of Magnesium and Alloys · doi:10.1016/j.jma.2019.08.001 · Cited by 586
Derekar, K. S. (2018) · Materials Science and Technology · doi:10.1080/02670836.2018.1455012 · Cited by 493
Lasers in additive manufacturing: A review
Lee, H., Lim, C. H. J., Low, M. J., Tham, N., Murukeshan, V. M., & Kim, Y.-J. (2017) · International Journal of Precision Engineering and Manufacturing-Green Technology · doi:10.1007/s40684-017-0037-7 · Cited by 449
Sintering: from Empirical Observations to Scientific Principles
(2014) · Elsevier eBooks · doi:10.1016/c2012-0-00717-x · Cited by 421
Additively manufactured biodegradable porous magnesium
Li, Y., Zhou, J., Pavanram, P., Leeflang, M. A., Fockaert, L. I., Pouran, B., Tümer, N., Schröder, K.-U., Mol, J. M. C., Weinans, H., et al. (2018) · Acta Biomaterialia · doi:10.1016/j.actbio.2017.12.008 · Cited by 396
Palanivel, S., Nelaturu, P., Glass, B., & Mishra, R. S. (2015) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2014.09.082 · Cited by 336
Wei, K., Gao, M., Wang, Z., & Zeng, X. (2014) · Materials Science and Engineering: A · doi:10.1016/j.msea.2014.05.092 · Cited by 330
Review on friction stir welding of magnesium alloys
Singh, K., Singh, G., & Singh, H. (2018) · Journal of Magnesium and Alloys · doi:10.1016/j.jma.2018.06.001 · Cited by 283
Effects of processing parameters on properties of selective laser melting Mg–9%Al powder mixture
Zhang, B., Liao, H., & Coddet, C. (2012) · Materials & Design · doi:10.1016/j.matdes.2011.06.061 · Cited by 280
Biodegradable metallic bone implants
Shuai, C., Li, S., Peng, S., Feng, P., Lai, Y., & Gao, C. (2019) · Materials Chemistry Frontiers · doi:10.1039/c8qm00507a · Cited by 275
Hybrid metal additive manufacturing: A state–of–the-art review
Pragana, J. P. M., Sampaio, R. F. V., Bragança, I. M. F., Silva, C. M. A., & Martins, P. A. F. (2021) · Advances in Industrial and Manufacturing Engineering · doi:10.1016/j.aime.2021.100032 · Cited by 256
Additive friction stir deposition: a deformation processing route to metal additive manufacturing
Yu, H. Z., & Mishra, R. S. (2021) · Materials Research Letters · doi:10.1080/21663831.2020.1847211 · Cited by 248
Guo, J., Zhou, Y., Liu, C., Wu, Q., Chen, X., & Lu, J. (2016) · Materials · doi:10.3390/ma9100823 · Cited by 241
Selective Laser Melting of Magnesium and Magnesium Alloy Powders: A Review
Manakari, V., Parande, G., & Gupta, M. (2016) · Metals · doi:10.3390/met7010002 · Cited by 241
Recent advances in biodegradation controls over Mg alloys for bone fracture management: A review
Song, M.-S., Zeng, R.-C., Ding, Y.-F., Li, R. W., Easton, M., Cole, I., Birbilis, N., & Chen, X.-B. (2019) · Journal of Materials Science & Technology · doi:10.1016/j.jmst.2018.10.008 · Cited by 230
Self-citationKumar Srivastava, A., Kumar, N., & Rai Dixit, A. (2021) · Materials Science and Engineering: B · doi:10.1016/j.mseb.2020.114832 · Cited by 223
Zumdick, N. A., Jauer, L., Kersting, L. C., Kutz, T. N., Schleifenbaum, J. H., & Zander, D. (2019) · Materials Characterization · doi:10.1016/j.matchar.2018.11.011 · Cited by 215
Microstructure and mechanical properties of selective laser melted magnesium
Ng, C. C., Savalani, M. M., Lau, M. L., & Man, H. C. (2011) · Applied Surface Science · doi:10.1016/j.apsusc.2011.03.004 · Cited by 208
SUGAWARA, Y., KAMIOKA, H., HONJO, T., TEZUKA, K., & TAKANOYAMAMOTO, T. (2005) · Bone · doi:10.1016/j.bone.2004.10.008 · Cited by 198
Bär, F., Berger, L., Jauer, L., Kurtuldu, G., Schäublin, R., Schleifenbaum, J. H., & Löffler, J. F. (2019) · Acta Biomaterialia · doi:10.1016/j.actbio.2019.05.056 · Cited by 198
Sezer, N., Evis, Z., & Koç, M. (2021) · Journal of Magnesium and Alloys · doi:10.1016/j.jma.2020.09.014 · Cited by 171
Wen, Z., Wu, C., Dai, C., & Yang, F. (2009) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2009.08.147 · Cited by 168
Kopp, A., Derra, T., Müther, M., Jauer, L., Schleifenbaum, J. H., Voshage, M., Jung, O., Smeets, R., & Kröger, N. (2019) · Acta Biomaterialia · doi:10.1016/j.actbio.2019.04.012 · Cited by 168
Self-citationAdditive manufacturing of metallic based on extrusion process: A review
Nurhudan, A. I., Supriadi, S., Whulanza, Y., & Saragih, A. S. (2021) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2021.04.018 · Cited by 157
Esmaily, M., Zeng, Z., Mortazavi, A. N., Gullino, A., Choudhary, S., Derra, T., Benn, F., D’Elia, F., Müther, M., Thomas, S., et al. (2020) · Additive manufacturing · doi:10.1016/j.addma.2020.101321 · Cited by 147
Self-citationLi, M., Benn, F., Derra, T., Kröger, N., Zinser, M. J., Smeets, R., Molina-Aldareguia, J. M., Kopp, A., & LLorca, J. (2020) · Materials Science and Engineering C · doi:10.1016/j.msec.2020.111623 · Cited by 146
Self-citationResearch progress on selective laser melting (SLM) of magnesium alloys: A review
Zhang, W., Wang, L.-Z., Feng, Z., & Chen, Y. (2020) · Optik · doi:10.1016/j.ijleo.2019.163842 · Cited by 141
Gopan, V., Wins, K. L. D., & Surendran, A. (2021) · CIRP journal of manufacturing science and technology · doi:10.1016/j.cirpj.2020.12.004 · Cited by 138
Corrosion resistance of glucose-induced hydrothermal calcium phosphate coating on pure magnesium
Li, L.-Y., Cui, L., Liu, B., Zeng, R.-C., Chen, X., Li, S., Wang, Z., & Han, E. (2018) · Applied Surface Science · doi:10.1016/j.apsusc.2018.09.203 · Cited by 137
Current trends and research opportunities in hybrid additive manufacturing
Dilberoglu, U. M., Gharehpapagh, B., Yaman, U., & Dölen, M. (2021) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-021-06688-1 · Cited by 135
Layer manufacturing of magnesium and its alloy structures for future applications
Ng, C. C., Savalani, M. M., Man, H. C., & Gibson, I. (2010) · Virtual and Physical Prototyping · doi:10.1080/17452751003718629 · Cited by 131
Li, J., Qiu, Y., Yang, J., Sheng, Y., Yi, Y., Zeng, X., Chen, L., Yin, F., Su, J.-Z., Zhang, T., et al. (2021) · Journal of Magnesium and Alloys · doi:10.1016/j.jma.2021.04.007 · Cited by 131
Laser rapid solidification improves corrosion behavior of Mg-Zn-Zr alloy
Shuai, C., Yang, Y., Wu, P., Lin, X., Liu, Y., Zhou, Y., Feng, P., Liu, X., & Peng, S. (2016) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2016.09.019 · Cited by 130
Microstructure and mechanical behavior of an additive manufactured (AM) WE43-Mg alloy
Gangireddy, S., Gwalani, B., Liu, K., Faierson, E. J., & Mishra, R. S. (2018) · Additive manufacturing · doi:10.1016/j.addma.2018.12.015 · Cited by 123
Cold Metal Transfer (CMT) Based Wire and Arc Additive Manufacture (WAAM) System
Chen, X., Su, C., Wang, Y., Siddiquee, A. N., Konovalov, S. V., Jayalakshmi, S., & Singh, R. A. (2018) · Journal of Surface Investigation X-ray Synchrotron and Neutron Techniques · doi:10.1134/s102745101901004x · Cited by 122
Shuai, C., Liu, L., Zhao, M., Feng, P., Yang, Y., Guo, W., Gao, C., & Yuan, F. (2018) · Journal of Material Science and Technology · doi:10.1016/j.jmst.2018.02.006 · Cited by 121
Liu, S., Yang, W., Shi, X. F., Li, B., Duan, S., Guo, H., & Guo, J. (2019) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2019.06.261 · Cited by 121
Liu, C., Zhang, M. J., & Chen, C. (2017) · Materials Science and Engineering A · doi:10.1016/j.msea.2017.07.031 · Cited by 118
Challenges and Solutions for the Additive Manufacturing of Biodegradable Magnesium Implants
Wang, Y., Fu, P., Wang, N., Peng, L., Kang, B., Zeng, H., Yuan, G., & Ding, W. (2020) · Engineering · doi:10.1016/j.eng.2020.02.015 · Cited by 117
Williams, M. B., Robinson, T. W., Williamson, C. J., Kinser, R. P., Ashmore, N. A., Allison, P., & Jordon, J. B. (2021) · Metals · doi:10.3390/met11111739 · Cited by 116
Takagi, H., SASAHARA, H., Abe, T., Sannomiya, H., Nishiyama, S., Ohta, S., & Nakamura, K. (2018) · Additive manufacturing · doi:10.1016/j.addma.2018.10.026 · Cited by 112
Wolff, M., Ebel, T., & Dahms, M. (2010) · Advanced Engineering Materials · doi:10.1002/adem.201000038 · Cited by 105
Salehi, M., Maleksaeedi, S., Sapari, M. A. B., Nai, M. L. S., Meenashisundaram, G. K., & Gupta, M. (2019) · Materials & Design · doi:10.1016/j.matdes.2019.107683 · Cited by 102
Self-citationRathee, S., Srivastava, M., Pandey, P. M., Mahawar, A., & Shukla, S. (2021) · CIRP journal of manufacturing science and technology · doi:10.1016/j.cirpj.2021.08.003 · Cited by 100
Experimental Investigation on Selective Laser Melting of Bulk Net-Shape Pure Magnesium
Hu, D., Wang, Y., Zhang, D., Hao, L., Jiang, J., Li, Z., & Chen, Y. (2015) · Materials and Manufacturing Processes · doi:10.1080/10426914.2015.1025963 · Cited by 99
Solvent-cast 3D printing of magnesium scaffolds
Dong, J., Li, Y., Lin, P., Leeflang, M. A., van Asperen, S., Yu, K., Tümer, N., Norder, B., ZADPOOR, A. A., & Zhou, J. (2020) · Acta Biomaterialia · doi:10.1016/j.actbio.2020.08.002 · Cited by 94
3D Printing of Salt as a Template for Magnesium with Structured Porosity
Kleger, N., Cihova, M., Masania, K., Studart, A. R., & Löffler, J. F. (2019) · Advanced Materials · doi:10.1002/adma.201903783 · Cited by 88
Design of experiments approach in AZ31 powder selective laser melting process optimization
Pawlak, A., Rosienkiewicz, M., & Chlebus, E. (2016) · Archives of Civil and Mechanical Engineering · doi:10.1016/j.acme.2016.07.007 · Cited by 86
Li, R., Kirkland, N. T., Truong, J., Wang, J., Smith, P. N., Birbilis, N., & Nisbet, D. R. (2014) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.35111 · Cited by 83
Self-citationA Novel Manufacturing Route for Fabrication of Topologically‐Ordered Porous Magnesium Scaffolds
Nguyen, T. L., Staiger, M. P., Dias, G. J., & Woodfield, T. B. F. (2011) · Advanced Engineering Materials · doi:10.1002/adem.201100029 · Cited by 82
Synthesis and properties of topologically ordered porous magnesium
Kirkland, N. T., Kolbeinsson, I., Woodfield, T. B. F., Dias, G. J., & Staiger, M. P. (2011) · Materials Science and Engineering B · doi:10.1016/j.mseb.2011.04.006 · Cited by 78
Niu, X., Shen, H., Fu, J., & Feng, J. (2021) · Materials & Design · doi:10.1016/j.matdes.2021.109787 · Cited by 78
Xu, R., Zhao, M., Zhao, Y., Liu, L., Liu, C., Gao, C., Shuai, C., & Atrens, A. (2018) · Materials Letters · doi:10.1016/j.matlet.2018.11.071 · Cited by 76
Salehi, M., Maleksaeedi, S., Nai, M. L. S., Meenashisundaram, G. K., Goh, M. H., & Gupta, M. (2018) · Acta Materialia · doi:10.1016/j.actamat.2018.11.061 · Cited by 74
Self-citationWu, C. L., Zai, W., & Man, H. C. (2020) · Materials Today Communications · doi:10.1016/j.mtcomm.2020.101922 · Cited by 74
Deng, Q., Wu, Y., Su, N., Chang, Z., Chen, J., Peng, L., & Ding, W. (2021) · Additive manufacturing · doi:10.1016/j.addma.2021.102036 · Cited by 69
Salehi, M., Maleksaeedi, S., Nai, M. L. S., & Gupta, M. K. (2019) · Additive manufacturing · doi:10.1016/j.addma.2019.100790 · Cited by 68
Self-citationMicrostructural and Mechanical Properties of a Solid-State Additive Manufactured Magnesium Alloy
Robinson, T. W., Williams, M. B., Rao, H. M., Kinser, R. P., Allison, P., & Jordon, J. B. (2021) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.4052968 · Cited by 57
Microstructure Evolution and Biodegradation Behavior of Laser Rapid Solidified Mg–Al–Zn Alloy
He, C., Bin, S., Wu, P., Gao, C., Feng, P., Yang, Y., Liu, L., Zhou, Y., Zhao, M., Yang, S. L., et al. (2017) · Metals · doi:10.3390/met7030105 · Cited by 53
A Review of SLMed Magnesium Alloys: Processing, Properties, Alloying Elements and Postprocessing
Liu, S., & Guo, H. (2020) · Metals · doi:10.3390/met10081073 · Cited by 52
Rapid densification of additive manufactured magnesium alloys via microwave sintering
Salehi, M., Seet, H. L., Gupta, M. K., Farnoush, H., Maleksaeedi, S., & Nai, M. L. S. (2020) · Additive manufacturing · doi:10.1016/j.addma.2020.101655 · Cited by 44
Self-citationExtrusion-based 3D printed magnesium scaffolds with multifunctional MgF 2 and MgF 2 –CaP coatings
Dong, J., Tümer, N., Putra, N. E., Zhu, J., Li, Y., Leeflang, M. A., Taheri, P., Fratila-Apachitei, L. E., Mol, J. M. C., ZADPOOR, A. A., et al. (2021) · Biomaterials Science · doi:10.1039/d1bm01238j · Cited by 43
Osteoanabolic Implant Materials for Orthopedic Treatment
Ding, Y., Li, R., Nakai, M., Majumdar, T., Zhang, D., Niinomi, M., Birbilis, N., Smith, P. N., & Chen, X. (2016) · Advanced Healthcare Materials · doi:10.1002/adhm.201600074 · Cited by 36
Self-citation
Cited by
Grain refinement of magnesium alloys by dynamic recrystallization (DRX): A review
Mirzadeh, H. (2023) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2023.07.150 · Cited by 354
Wang, Z., Liu, B., Yin, B., Zheng, Y., Tian, Y., & Wen, P. (2022) · Frontiers in Chemistry · doi:10.3389/fchem.2022.1066103 · Cited by 30
“growth by rapid solidification at high cooling rates (Zeng et al., 2022).”
Background
Metadata
- Authors
- Zeng, Z., Salehi, M., Kopp, A., Xu, S., Esmaily, M., & Birbilis, N.
- Venue
- Journal of Magnesium and Alloys
- Publisher
- Elsevier BV
- Published
- 2022-06
- Volume
- 10
- Issue
- 6
- Pages
- 1511-1541
- ISSN
- 2213-9567 (ISSN-L)
- OpenAlex
- W4229028648
- Cited by
- 264
- References
- 75
- FWCI
- 11.25
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.