The DOI matches its Crossref record; 386 of the 386 references it cites were found in a registry or an index.
4D printing of shape memory polymer composites: A review on fabrication techniques, applications, and future perspectives
Open accessOverview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Items 201–386 of 386
Nugroho, W. T., Dong, Y., Pramanik, A., Leng, J., & Ramakrishna, S. (2021) · Composites Part B Engineering · doi:10.1016/j.compositesb.2021.109104 · Cited by 118
Multifunctional thermo-magnetically actuated hybrid soft millirobot based on 4D printing
Hu, X., Ge, Z., Wang, X., Jiao, N., Tung, S. C. H., & Liu, L. (2021) · Composites Part B Engineering · doi:10.1016/j.compositesb.2021.109451 · Cited by 118
Bioinspired Electro‐Thermo‐Hygro Reversible Shape‐Changing Materials by 4D Printing
Duigou, A. L., Chabaud, G., Scarpa, F. L., & Castro, M. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201903280 · Cited by 117
Zhang, J., Yin, Z., Ren, L., Liu, Q., Ren, L., Yang, X., & Zhou, X. (2022) · Advanced Materials Technologies · doi:10.1002/admt.202101568 · Cited by 116
Additive manufacturing with stimuli-responsive materials
Boydston, A. J., Cao, B., Nelson, A., Ono, R. J., Saha, A., Schwartz, J. J., & Thrasher, C. J. (2018) · Journal of Materials Chemistry A · doi:10.1039/c8ta07716a · Cited by 115
Mechanical Models, Structures, and Applications of Shape-Memory Polymers and Their Composites
Xin, X., Liu, L., Liu, Y., & Leng, J. (2019) · Acta Mechanica Solida Sinica · doi:10.1007/s10338-019-00103-9 · Cited by 115
Cui, C., Kim, D.-O., Pack, M. Y., Han, B., Han, L., Sun, Y., & Han, L. (2020) · Biofabrication · doi:10.1088/1758-5090/aba502 · Cited by 114
Review of 4D printing materials and reinforced composites: Behaviors, applications and challenges
Alshahrani, H. (2021) · Journal of Science Advanced Materials and Devices · doi:10.1016/j.jsamd.2021.03.006 · Cited by 114
3D and 4D printing: From innovation to evolution
Mallakpour, S. E., Tabesh, F., & Hussain, C. M. (2021) · Advances in Colloid and Interface Science · doi:10.1016/j.cis.2021.102482 · Cited by 114
Control-Based 4D Printing: Adaptive 4D-Printed Systems
Zolfagharian, A., Kaynak, A., Bodaghi, M., Kouzani, A. Z., Gharaie, S., & Nahavandi, S. (2020) · Applied Sciences · doi:10.3390/app10093020 · Cited by 112
Self-citationFused Filament Fabrication Process: A Review of Numerical Simulation Techniques
Rashid, A. A., & Koç, M. (2021) · Polymers · doi:10.3390/polym13203534 · Cited by 111
4D printing: processability and measurement of recovery force in shape memory polymers
Monzón, M., Paz, R., Pei, E., Ortega, Z., Suárez, L., Ortega, Z., Alemán‐Domínguez, M. E., Plucinski, T., & Clow, N. (2016) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-016-9233-9 · Cited by 110
Selective Laser Sintering-Based 4D Printing of Magnetism-Responsive Grippers
Wu, H., Wang, O., Tian, Y., Wang, M., Su, B., Yan, C., Zhou, K., & Shi, Y. (2020) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.0c17429 · Cited by 110
3D and 4D lithography of untethered microrobots
Rajabasadi, F., Schwarz, L., Medina‐Sánchez, M., & Schmidt, O. G. (2021) · Progress in Materials Science · doi:10.1016/j.pmatsci.2021.100808 · Cited by 110
Melocchi, A., Uboldi, M., Maroni, A., Foppoli, A. A., Palugan, L., Zema, L., & Gazzaniga, A. (2020) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2020.119155 · Cited by 109
Yang, C., Wang, B., Li, D., & Tian, X. (2017) · Virtual and Physical Prototyping · doi:10.1080/17452759.2016.1265992 · Cited by 108
4D printing composite with electrically controlled local deformation
Shao, L., Zhao, B., Zhang, Q., Xing, Y., & Zhang, K. (2020) · Extreme Mechanics Letters · doi:10.1016/j.eml.2020.100793 · Cited by 108
4D Printing: Technological and Manufacturing Renaissance
Khalid, M. Y., Arif, Z. U., & Ahmed, W. (2022) · Macromolecular Materials and Engineering · doi:10.1002/mame.202200003 · Cited by 106
Self-citationHuang, X., Panahi‐Sarmad, M., Dong, K., Li, R., Chen, T., & Xiao, X. (2021) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2021.106444 · Cited by 104
Design of a shape memory composite(SMC) using 4D printing technology
Kang, M., Pyo, Y., Jang, J. Y., Park, Y., Son, Y.-H., Choi, M. C., Ha, J. W., Chang, Y., & Lee, C. S. (2018) · Sensors and Actuators A Physical · doi:10.1016/j.sna.2018.08.049 · Cited by 103
Wu, H., Zhang, X., Ma, Z., Zhang, C., Ai, J., Chen, P., Yan, C., Su, B., & Shi, Y. (2020) · Advanced Science · doi:10.1002/advs.201903208 · Cited by 101
Additive manufacturing of multi-material soft robot for on-demand drug delivery applications
Joyee, E. B., & Pan, Y. (2020) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2020.03.059 · Cited by 99
4D-printed bi-material composite laminate for manufacturing reversible shape-change structures
Wang, Y., & Li, X. (2021) · Composites Part B Engineering · doi:10.1016/j.compositesb.2021.108918 · Cited by 99
Recent advancement in 3-D printing: nanocomposites with added functionality
Clarissa, W. H.-Y., Chia, C. H., Zakaria, S., & Yang, E. C. Y. (2021) · Progress in Additive Manufacturing · doi:10.1007/s40964-021-00232-z · Cited by 99
Hierarchically self-morphing structure through 4D printing
Teoh, J. E. M., An, J., Chua, C. K., Lv, M. Y., Krishnasamy, V., & Liu, Y. (2016) · Virtual and Physical Prototyping · doi:10.1080/17452759.2016.1272174 · Cited by 98
Marco, C. D., Pané, S., & Nelson, B. J. (2018) · Science Robotics · doi:10.1126/scirobotics.aau0449 · Cited by 98
Plant leaf-mimetic smart wind turbine blades by 4D printing
Momeni, F., Sabzpoushan, S., Valizadeh, R., Morad, M. R., Liu, X., & Ni, J. (2018) · Renewable Energy · doi:10.1016/j.renene.2018.05.095 · Cited by 98
Shape memory polymer nanocomposite: a review on structure–property relationship
Bhanushali, H., Amrutkar, S. Y., Mestry, S. U., & Mhaske, S. T. (2021) · Polymer Bulletin · doi:10.1007/s00289-021-03686-x · Cited by 98
Momeni, F., & Ni, J. (2020) · Engineering · doi:10.1016/j.eng.2020.01.015 · Cited by 97
4D printing: a critical review of current developments, and future prospects
Ali, M. H., Abilgaziyev, A., & Adair, D. (2019) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-019-04258-0 · Cited by 97
Yamamura, S., & Iwase, E. (2021) · Materials & Design · doi:10.1016/j.matdes.2021.109605 · Cited by 97
Huang, X., Panahi‐Sarmad, M., Dong, K., et al. (2022) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2022.106946 · Cited by 96
4D Printing Prospects for the Aerospace Industry: a critical review
Ntouanoglou, K., Stavropoulos, P. G., & Mourtzis, D. (2018) · Procedia Manufacturing · doi:10.1016/j.promfg.2018.11.016 · Cited by 95
4D Printing via an Unconventional Fused Deposition Modeling Route to High-Performance Thermosets
Chen, Q., Han, L., Ren, J., Rong, L., Cao, P., & Advíncula, R. C. (2020) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.0c13976 · Cited by 95
3D Printing with Biomaterials:
van Wijk, A., & Iris, V. W. (2015) · IOS Press eBooks · doi:10.3233/978-1-61499-486-2-i · Cited by 94
Incorporation of graphitic nano‐filler and poly(lactic acid) in fused deposition modeling
Wang, Y., Zhang, J., Wu, J. R., Wang, X., & Deng, Y. (2017) · Journal of Applied Polymer Science · doi:10.1002/app.44703 · Cited by 93
Current progress of 4D-printing technology
Subeshan, B., Baddam, Y., & Asmatulu, E. (2021) · Progress in Additive Manufacturing · doi:10.1007/s40964-021-00182-6 · Cited by 93
4D Printing of Shape Memory Vascular Stent Based on β CD‐ g ‐Polycaprolactone
Zhou, Y., Zhou, D., Cao, P., Zhang, X., Wang, Q., Wang, T., Li, Z., He, W., Ju, J., & Zhang, Y. (2021) · Macromolecular Rapid Communications · doi:10.1002/marc.202100176 · Cited by 93
Multistable Thermal Actuators Via Multimaterial 4D Printing
Jeong, H. Y., Lee, E., Ha, S., Kim, N., & Jun, Y. C. (2018) · Advanced Materials Technologies · doi:10.1002/admt.201800495 · Cited by 92
4D printed anisotropic structures with tailored mechanical behaviors and shape memory effects
Liu, T., Liu, L., Zeng, C., Liu, Y., & Leng, J. (2019) · Composites Science and Technology · doi:10.1016/j.compscitech.2019.107935 · Cited by 90
4D printed programmable auxetic metamaterials with shape memory effects
Wan, M., Yu, K., & Sun, H. (2021) · Composite Structures · doi:10.1016/j.compstruct.2021.114791 · Cited by 90
Review of mechanisms and deformation behaviors in 4D printing
Ding, H., Zhang, X., Liu, Y., & Ramakrishna, S. (2019) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-019-03871-3 · Cited by 89
The chemistry behind 4D printing
Pinho, A. C., Buga, C. S., & Piedade, A. P. (2020) · Applied Materials Today · doi:10.1016/j.apmt.2020.100611 · Cited by 89
From 3D to 4D printing—Design, material and fabrication for multi-functional multi-materials
Khare, V., Sonkaria, S., Lee, G.-Y., Ahn, S.-H., & Chu, W.-S. (2017) · International Journal of Precision Engineering and Manufacturing-Green Technology · doi:10.1007/s40684-017-0035-9 · Cited by 88
4D bioprinting of tissues and organs
Amukarimi, S., & Mozafari, M. (2021) · Bioprinting · doi:10.1016/j.bprint.2021.e00161 · Cited by 88
Duigou, A. L., Fruleux, T., Matsuzaki, R., Chabaud, G., Ueda, M., & Castro, M. (2021) · Materials & Design · doi:10.1016/j.matdes.2021.110158 · Cited by 88
Dynamic plant-derived polysaccharide-based hydrogels
Heidarian, P., Kouzani, A. Z., Kaynak, A., Paulino, M., Nasri‐Nasrabadi, B., Zolfagharian, A., & Varley, R. J. (2019) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2019.115743 · Cited by 87
Self-citation4D Printing: Enabling Technology for Microrobotics Applications
Adam, G., Benouhiba, A., Rabenorosoa, K., Clévy, C., & Cappelleri, D. J. (2021) · Advanced Intelligent Systems · doi:10.1002/aisy.202000216 · Cited by 87
4D Printing of Engineered Living Materials
Rivera‐Tarazona, L. K., Shukla, T. N., Singh, K. A., Gaharwar, A. K., Campbell, Z. T., & Ware, T. H. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202106843 · Cited by 87
4D printing of electroactive shape-changing composite structures and their programmable behaviors
Dong, X., Zhang, F., Wang, L., Liu, Y., & Leng, J. (2022) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2022.106925 · Cited by 86
Seo, J. W., Shin, S. R., Park, Y. J., & Bae, H. (2020) · Tissue Engineering and Regenerative Medicine · doi:10.1007/s13770-020-00264-6 · Cited by 85
Mallakpour, S. E., Tabesh, F., & Hussain, C. M. (2022) · Advances in Colloid and Interface Science · doi:10.1016/j.cis.2022.102605 · Cited by 85
A bioinspired 4D printed hydrogel capsule for smart controlled drug release
Zu, S., Wang, Z., Zhang, S., Guo, Y., Chen, C., Zhang, Q., Wang, Z., Liu, T., Liu, Q., & Zhang, Z. (2022) · Materials Today Chemistry · doi:10.1016/j.mtchem.2022.100789 · Cited by 85
Guo, Y., Liu, Y., Liu, J., Zhao, J., Zhang, H., & Zhang, Z. (2020) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2020.105903 · Cited by 84
Capillary‐Force‐Driven Self‐Assembly of 4D‐Printed Microstructures
Liu, X., Wei, M., Wang, Q., Tian, Y., Han, J., Gu, H., Ding, H., Chen, Q., Zhou, K., & Gu, Z. (2021) · Advanced Materials · doi:10.1002/adma.202100332 · Cited by 84
4D printing of polyurethane paint-based composites
Su, J.-W., Gao, W., Trinh, K., Kenderes, S. M., Tekin Pulatsu, E., Zhang, C., Whittington, A., Lin, M., & Lin, J. (2019) · International Journal of Smart and Nano Materials · doi:10.1080/19475411.2019.1618409 · Cited by 81
4D printing of core–shell hydrogel capsules for smart controlled drug release
Zu, S., Zhang, Z., Liu, Q., Wang, Z., Song, Z., Guo, Y., Xin, Y.-Z., & Zhang, S. (2022) · Bio-Design and Manufacturing · doi:10.1007/s42242-021-00175-y · Cited by 81
Fused Filament Fabrication-4D-Printed Shape Memory Polymers: A Review
Valvez, S., Reis, P. N. B., Susmel, L., & Berto, F. (2021) · Polymers · doi:10.3390/polym13050701 · Cited by 80
Shaping soft materials via digital light processing-based 3D printing: A review
Ge, Q., Jian, B., & Li, H. (2022) · Forces in Mechanics · doi:10.1016/j.finmec.2022.100074 · Cited by 80
McLellan, K., Sun, Y.-C., & Naguib, H. E. (2022) · Bioprinting · doi:10.1016/j.bprint.2022.e00217 · Cited by 80
Nature-inspired smart solar concentrators by 4D printing
Momeni, F., & Ni, J. (2018) · Renewable Energy · doi:10.1016/j.renene.2018.01.062 · Cited by 79
A taxonomy of shape-changing behavior for 4D printed parts using shape-memory polymers
Nam, S., & Pei, E. (2019) · Progress in Additive Manufacturing · doi:10.1007/s40964-019-00079-5 · Cited by 79
Chen, L., Zhang, Y., Ye, H., Duan, G., Duan, H., Ge, Q., & Wang, Z. (2021) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.1c02656 · Cited by 78
Shanthamma, S., Preethi, R., Moses, J. A., & Anandharamakrishnan, C. (2021) · ACS Food Science & Technology · doi:10.1021/acsfoodscitech.0c00151 · Cited by 78
Keneth, E. S., Lieberman, R., Rednor, M., Scalet, G., Auricchio, F., & Magdassi, S. (2020) · Polymers · doi:10.3390/polym12030710 · Cited by 76
Xin, X., Liu, L., Liu, Y., & Leng, J. (2020) · Smart Materials and Structures · doi:10.1088/1361-665x/ab85a4 · Cited by 75
Medical application of biomimetic 4D printing
Shakibania, S., Ghazanfari, L., Raeeszadeh‐Sarmazdeh, M., & Khakbiz, M. (2020) · Drug Development and Industrial Pharmacy · doi:10.1080/03639045.2020.1862179 · Cited by 75
Porous PLAs with Controllable Density by FDM 3D Printing and Chemical Foaming Agent
Damanpack, A. R., de Sousa, A. R., & Bodaghi, M. (2021) · Micromachines · doi:10.3390/mi12080866 · Cited by 75
Self-citationDevelopment of Bioimplants with 2D, 3D, and 4D Additive Manufacturing Materials
Liu, G., He, Y., Liu, P., Chen, Z., Chen, X., Wan, L., Li, Y., & Lü, J. (2020) · Engineering · doi:10.1016/j.eng.2020.04.015 · Cited by 74
Additive Manufacturing of Shape Memory Polymer Composites for Futuristic Technology
Patadiya, J., Gawande, A., Joshi, G. N., & Kandasubramanian, B. (2021) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.1c03083 · Cited by 74
Multimaterial direct 4D printing of high stiffness structures with large bending curvature
Yuan, C., Wang, F., & Ge, Q. (2020) · Extreme Mechanics Letters · doi:10.1016/j.eml.2020.101122 · Cited by 73
Advances in 4D‐printed physiological monitoring sensors
Mahmud, M. A. P., Tat, T., Xiao, X., Adhikary, P., & Chen, J. (2021) · Exploration · doi:10.1002/exp.20210033 · Cited by 73
Moradi, M., Karamimoghadam, M., Shamsborhan, M., & Bodaghi, M. (2020) · Journal of Composites Science · doi:10.3390/jcs4010017 · Cited by 72
Self-citation4D Textiles Made by Additive Manufacturing on Pre-Stressed Textiles—An Overview
Koch, H., Schmelzeisen, D., & Gries, T. (2021) · Actuators · doi:10.3390/act10020031 · Cited by 72
Nguyen, T. T., & Kim, J. (2020) · Fibers and Polymers · doi:10.1007/s12221-020-9882-z · Cited by 71
Perspectives on multi-material additive manufacturing
Zheng, X. R., Williams, C. B., Spadaccini, C. M., & Shea, K. (2021) · Journal of materials research/Pratt's guide to venture capital sources · doi:10.1557/s43578-021-00388-y · Cited by 71
4D printed shape memory metamaterial for vibration bandgap switching and active elastic-wave guiding
Li, B., Zhang, C., Peng, F., Wang, W., Vogt, B. D., & Tan, K. T. (2020) · Journal of Materials Chemistry C · doi:10.1039/d0tc04999a · Cited by 70
Shape‐Memory Balloon Structures by Pneumatic Multi‐material 4D Printing
Zhang, Q., Kuang, X., Weng, S., Yue, L., Roach, D. J., Fang, D., & Qi, H. J. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202010872 · Cited by 70
Willemen, N. G. A., Morsink, M. A. J., Veerman, D., da Silva, C. F., Cardoso, J. C., Souto, E. B., & Severino, P. B. (2021) · Bio-Design and Manufacturing · doi:10.1007/s42242-021-00157-0 · Cited by 70
A review on progress in magnetic, microwave, ultrasonic responsive Shape-memory polymer composites
Namathoti, S., Ravindra kumar, V. M., & Rama Sreekanth, P. S. (2021) · Materials Today Proceedings · doi:10.1016/j.matpr.2021.11.151 · Cited by 70
Vahabli, E., Mann, J., Heidari, B. S., Lawrence‐Brown, M. M. D., Norman, P. E., Jansen, S. J., De‐Juan‐Pardo, E. M., & Doyle, B. J. (2022) · Advanced Healthcare Materials · doi:10.1002/adhm.202200271 · Cited by 70
Flytrap Inspired pH‐Driven 3D Hydrogel Actuator by Femtosecond Laser Microfabrication
Wang, J., Jin, F., Dong, X., Liu, J., & Zheng, M. (2022) · Advanced Materials Technologies · doi:10.1002/admt.202200276 · Cited by 70
Polymer 4D printing: Advanced shape‐change and beyond
Imrie, P., & Jin, J. (2021) · Journal of Polymer Science · doi:10.1002/pol.20210718 · Cited by 69
4D Printing for Automotive Industry Applications
Raina, A., Haq, M. I. U., Javaid, M., Rab, S., & Haleem, A. (2021) · Journal of The Institution of Engineers (India) Series D · doi:10.1007/s40033-021-00284-z · Cited by 68
Akbar, I., Elhadrouz, M., Mansori, M. E., & Lagoudas, D. C. (2022) · European Polymer Journal · doi:10.1016/j.eurpolymj.2022.111106 · Cited by 68
An ontology-based framework to formalize and represent 4D printing knowledge in design
Dimassi, S., Demoly, F., Cruz, C., Qi, H. J., Kim, K.-Y. J., André, J., & Gomes, S. (2021) · Computers in Industry · doi:10.1016/j.compind.2020.103374 · Cited by 67
Dual-mode biomimetic soft actuator with electrothermal and magneto-responsive performance
Li, W., Sang, M., Liu, S., Wang, B., Cao, X., Liu, G., Gong, X., Hao, L., & Xuan, S. (2022) · Composites Part B Engineering · doi:10.1016/j.compositesb.2022.109880 · Cited by 67
Baniasadi, M., Yarali, E., Bodaghi, M., Zolfagharian, A., & Baghani, M. (2020) · International Journal of Mechanical Sciences · doi:10.1016/j.ijmecsci.2020.106082 · Cited by 66
Self-citationDynamic nanocellulose hydrogels: Recent advancements and future outlook
Heidarian, P., Kaynak, A., Paulino, M., Zolfagharian, A., Varley, R. J., & Kouzani, A. Z. (2021) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2021.118357 · Cited by 66
Self-citation4D printed shape memory sandwich structures: experimental analysis and numerical modeling
Serjouei, A., Yousefi, A., Jenaki, A., Bodaghi, M., & Mehrpouya, M. (2022) · Smart Materials and Structures · doi:10.1088/1361-665x/ac60b5 · Cited by 66
Self-citation4D Printing: The Shape-Morphing in Additive Manufacturing
Piedade, A. P. (2019) · Journal of Functional Biomaterials · doi:10.3390/jfb10010009 · Cited by 65
Preparation of Smart Materials by Additive Manufacturing Technologies: A Review
Mondal, K., & Tripathy, P. K. (2021) · Materials · doi:10.3390/ma14216442 · Cited by 65
Ouyang, H., Li, X., Lu, X., & Xia, H. (2022) · ACS Applied Polymer Materials · doi:10.1021/acsapm.2c00565 · Cited by 65
Noroozi, R., Shamekhi, M. A., Mahmoudi, R., Zolfagharian, A., Asgari, F., Mousavizadeh, A., Bodaghi, M., Hadi, A., & Haghighipour, N. (2022) · Biomedical Materials · doi:10.1088/1748-605x/ac7308 · Cited by 65
Self-citationDevelopment of composite springs using 4D printing method
Hoa, S. V. (2018) · Composite Structures · doi:10.1016/j.compstruct.2018.12.003 · Cited by 64
4D printing with spin-crossover polymer composites
Piedrahita‐Bello, M., Angulo‐Cervera, J. E., Courson, R., Molnár, G., Malaquin, L., Thibault, C., Tondu, B., Salmon, L., & Bousseksou, A. (2020) · Journal of Materials Chemistry C · doi:10.1039/d0tc01532f · Cited by 64
Contactless reversible 4D-printing for 3D-to-3D shape morphing
Lee, A. Y., Zhou, A., An, J., Chua, C. K., & Zhang, Y. (2020) · Virtual and Physical Prototyping · doi:10.1080/17452759.2020.1822189 · Cited by 64
4D printing: Perspectives for the production of sustainable plastics for agriculture
Maraveas, C., Bayer, I. S., & Bartzanas, T. (2022) · Biotechnology Advances · doi:10.1016/j.biotechadv.2021.107785 · Cited by 63
Four-dimensional printing using fused-deposition modeling: a review
Carrell, J., Gruss, G., & Gomez, E. (2020) · Rapid Prototyping Journal · doi:10.1108/rpj-12-2018-0305 · Cited by 63
4D Thermomechanical metamaterials for soft microrobotics
Ji, Q., Moughames, J., Chen, X., Fang, G., Huaroto, J. J., Laude, V., Martínez, J. A. I., Ulliac, G., Clévy, C., Lutz, P., et al. (2021) · Communications Materials · doi:10.1038/s43246-021-00189-0 · Cited by 61
4D Printing Elastic Composites for Strain-Tailored Multistable Shape Morphing
Deng, H., Zhang, C., Sattari, K., Ling, Y., Su, J., Yan, Z., & Lin, J. (2020) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.0c17618 · Cited by 58
4D Printing of Glass Fiber-Regulated Shape Shifting Structures with High Stiffness
Weng, S., Kuang, X., Zhang, Q., Hamel, C. M., Roach, D. J., Hu, N., & Qi, H. J. (2020) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.0c18988 · Cited by 58
4D Printing of Electroactive Materials
Chen, A. Y., Pegg, E., Chen, A., Jin, Z., & Gu, G. X. (2021) · Advanced Intelligent Systems · doi:10.1002/aisy.202100019 · Cited by 58
Chen, H., Zhang, F., Sun, Y., Sun, B., Gu, B., Leng, J., & Zhang, W. (2021) · Smart Materials and Structures · doi:10.1088/1361-665x/abd912 · Cited by 57
Nanostructural computation of 4D printing carboxymethylcellulose (CMC) composite
Oladapo, B. I., Oshin, E. A., & Olawumi, A. M. (2020) · Nano-Structures & Nano-Objects · doi:10.1016/j.nanoso.2020.100423 · Cited by 56
3D/4D printed tunable electrical metamaterials with more sophisticated structures
Yang, D., Mei, H., Li, Y., Yang, W., Yao, Y., Cheng, L., Zhang, L., & Dassios, K. G. (2021) · Journal of Materials Chemistry C · doi:10.1039/d1tc02588k · Cited by 56
Mechanically‐Guided 4D Printing of Magnetoresponsive Soft Materials across Different Length Scale
Zhu, H., He, Y., Wang, Y., Zhao, Y., & Jiang, C. (2021) · Advanced Intelligent Systems · doi:10.1002/aisy.202100137 · Cited by 56
An insight into biomimetic 4D printing
Kanu, N. J., Gupta, E., Vates, U. K., & Singh, G. K. (2019) · RSC Advances · doi:10.1039/c9ra07342f · Cited by 55
4D Printing Dual Stimuli-Responsive Bilayer Structure Toward Multiple Shape-Shifting
Ren, L., Li, B., Liu, Q., Ren, L., Song, Z., Zhou, X., & Gao, P. (2021) · Frontiers in Materials · doi:10.3389/fmats.2021.655160 · Cited by 55
Progress in 4D printing of stimuli responsive materials
Patdiya, J., & Kandasubramanian, B. (2021) · Polymer-Plastics Technology and Materials · doi:10.1080/25740881.2021.1934016 · Cited by 55
4D Printing of Smart Stimuli-Responsive Polymers
Suriano, R., Bernasconi, R., Magagnin, L., & Levi, M. (2019) · Journal of The Electrochemical Society · doi:10.1149/2.0411909jes · Cited by 53
Additive manufacturing landscape and materials perspective in 4D printing
Farid, M. I., Wu, W., Liu, X., & Wang, P. (2021) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-021-07233-w · Cited by 53
4D printing: Pragmatic progression in biofabrication
Sonatkar, J., Kandasubramanian, B., & Ismail, S. O. (2022) · European Polymer Journal · doi:10.1016/j.eurpolymj.2022.111128 · Cited by 53
Programming the time into 3D printing: current advances and future directions in 4D printing
Shen, B., Erol, O., Fang, L., & Kang, S. H. (2019) · Multifunctional Materials · doi:10.1088/2399-7532/ab54ea · Cited by 51
Applications of four-dimensional printing in emerging directions: Review and prospects
Huang, J., Xia, S., Li, Z., Wu, X., & Ren, J. (2021) · Journal of Material Science and Technology · doi:10.1016/j.jmst.2021.02.040 · Cited by 51
Testoni, O., Lumpe, T. S., Huang, J.-L., Wagner, M. A., Bodkhe, S., Zhakypov, Z., Spolenak, R., Paik, J. K., Ermanni, P., Muñoz, L., et al. (2021) · Smart Materials and Structures · doi:10.1088/1361-665x/ac01fa · Cited by 50
Digital light fabrication of reversible shape memory polymers
Shi, Y., Fang, G., Cao, Z., Shi, F., Zhao, Q., Fang, Z., & Xie, T. (2021) · Chemical Engineering Journal · doi:10.1016/j.cej.2021.131306 · Cited by 50
Advances in polymers for bio-additive manufacturing: A state of art review
Singh, N., & Singh, G. (2021) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2021.10.045 · Cited by 50
Chen, J., Zhang, M., MUJUMDAR, A. S., & Phuhongsunge, P. (2022) · Food Chemistry · doi:10.1016/j.foodchem.2022.132840 · Cited by 50
Wang, X., Zhang, Y., Shen, P., Cheng, Z., Chu, C., Xue, F., & Bai, J. (2022) · Biomaterials Science · doi:10.1039/d2bm00088a · Cited by 50
Noroozi, R., Tatar, F., Zolfagharian, A., Brighenti, R., Shamekhi, M. A., Rastgoo, A., Hadi, A., & Bodaghi, M. (2022) · International Journal of Bioprinting · doi:10.18063/ijb.v8i3.556 · Cited by 50
Self-citationOrigami-Based Design for 4D Printing of 3D Support-Free Hollow Structures
Jian, B., Demoly, F., Zhang, Y., Qi, H. J., André, J., & Gomes, S. (2022) · Engineering · doi:10.1016/j.eng.2021.06.028 · Cited by 49
Ayushi, A., Vates, U. K., Mishra, S. K., & Kanu, N. J. (2021) · Materials Today Proceedings · doi:10.1016/j.matpr.2021.07.148 · Cited by 48
Redesigning the modern applied medical sciences and engineering with shape memory polymers
Basak, S. (2021) · Advanced Composites and Hybrid Materials · doi:10.1007/s42114-021-00216-1 · Cited by 47
Yao, T., Wang, Y., Zhu, B., Dong, W., Yang, Y., & Han, X. (2020) · Smart Materials and Structures · doi:10.1088/1361-665x/abcc0a · Cited by 46
Mechanics-based design strategies for 4D printing: A review
Yuan, C., Lu, T., & Wang, T. J. (2022) · Forces in Mechanics · doi:10.1016/j.finmec.2022.100081 · Cited by 46
Dong, K., Chen, Z., Momo, Z. Y., Jiani, W., Xuan, C., Yu, X., & Xueliang, X. (2019) · Smart Materials and Structures · doi:10.1088/1361-665x/ab5e6d · Cited by 45
Liu, Y., & Chou, T. (2020) · Materials Today Advances · doi:10.1016/j.mtadv.2019.100045 · Cited by 45
Baniasadi, M., Yarali, E., Foyouzat, A., & Baghani, M. (2020) · European Journal of Mechanics - A/Solids · doi:10.1016/j.euromechsol.2020.104093 · Cited by 45
4D printed thermochromic Fresnel lenses for sensing applications
Ali, M., Alam, F., Yap, F. F., Shiryayev, O. V., Vahdati, N., & Butt, H. (2021) · Composites Part B Engineering · doi:10.1016/j.compositesb.2021.109514 · Cited by 45
Chen, H., Regeard, C., Salmi-Mani, H., Morlet‐Savary, F., Giacoletto, N., Nechab, M., Xiao, P., Dumur, F., & Lalevée, J. (2022) · European Polymer Journal · doi:10.1016/j.eurpolymj.2022.111042 · Cited by 45
Chan, B. Q. Y., Chong, Y. T., Wang, S., Lee, C. J. J., Owh, C., Wang, F., & Wang, F. (2021) · Chemical Engineering Journal · doi:10.1016/j.cej.2021.132513 · Cited by 44
Pulatsu, E., Su, J., Lin, J., & Lin, M. (2022) · Carbohydrate Polymer Technologies and Applications · doi:10.1016/j.carpta.2022.100183 · Cited by 44
Evaluation in 4D printing – A review
Kumar, S. B., JEEVAMALAR, J., Ramu, P., Suresh, G., & Senthilnathan, K. (2020) · Materials Today Proceedings · doi:10.1016/j.matpr.2020.07.335 · Cited by 42
Prathumrat, P., Nikzad, M., Hajizadeh, E., Arablouei, R., & Sbarski, I. (2022) · Polymers for Advanced Technologies · doi:10.1002/pat.5652 · Cited by 42
Additive manufacturing of smart materials exhibiting 4-D properties: A state of art review
Kumar, S., Singh, R., Batish, A., & Singh, T. (2019) · Journal of Thermoplastic Composite Materials · doi:10.1177/0892705719895052 · Cited by 41
Optimal shape morphing control of 4D printed shape memory polymer based on reinforcement learning
Ji, Q., Chen, M., Wang, X. V., Wang, L., & Feng, L. (2021) · Robotics and Computer-Integrated Manufacturing · doi:10.1016/j.rcim.2021.102209 · Cited by 40
Double-layer temperature-sensitive hydrogel fabricated by 4D printing with fast shape deformation
Li, Y., Zheng, W., Li, B., Dong, J., Gao, G., & Jiang, Z. (2022) · Colloids and Surfaces A Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2022.129307 · Cited by 40
Design for 4D printing: rapidly exploring the design space around smart materials
Sossou, G., Demoly, F., Montavon, G., & Gomes, S. (2018) · Procedia CIRP · doi:10.1016/j.procir.2018.02.032 · Cited by 39
Roudbarian, N., Baniasadi, M., Nayyeri, P., Ansari, M., Hedayati, R., & Baghani, M. (2021) · Smart Materials and Structures · doi:10.1088/1361-665x/ac1b3b · Cited by 39
Untethered selectively actuated microwave 4D printing through ferromagnetic PLA
Koh, T. Y., & Sutradhar, A. (2022) · Additive manufacturing · doi:10.1016/j.addma.2022.102866 · Cited by 39
3D and 4D additive manufacturing techniques for vascular-like structures – A review
Solis, D. M., & Czekanski, A. (2021) · Bioprinting · doi:10.1016/j.bprint.2021.e00182 · Cited by 38
Microstructural 4D printing investigation of ultra-sonication biocomposite polymer
Oladapo, B. I., Adebiyi, A. V., & Elemure, E. I. (2019) · Journal of King Saud University - Engineering Sciences · doi:10.1016/j.jksues.2019.12.002 · Cited by 37
Pacillo, G. A., Ranocchiai, G., Loccarini, F., & Fagone, M. (2021) · Material Design & Processing Communications · doi:10.1002/mdp2.253 · Cited by 37
Zhang, H., Huang, S., Sheng, J., Fan, L., Zhou, J., Shan, M., Wei, J., Wang, C., Yang, H., & Lu, J. (2022) · ACS Applied Nano Materials · doi:10.1021/acsanm.2c00264 · Cited by 37
Han, M., Yang, Y., & Li, L. (2020) · Additive manufacturing · doi:10.1016/j.addma.2020.101223 · Cited by 36
Recent Advances of 4D Printing Technologies Toward Soft Tactile Sensors
Tang, Y., Dai, B., Su, B., & Shi, Y. (2021) · Frontiers in Materials · doi:10.3389/fmats.2021.658046 · Cited by 36
4D Printing Classroom in Modern Interactive Learning Environments
Zolfagharian, A., Jarrah, H. R., & Bodaghi, M. (2021) · Bioprinting · doi:10.1016/j.bprint.2021.e00169 · Cited by 36
Self-citationWu, C., Chen, J., & Su, C. (2022) · Analytica Chimica Acta · doi:10.1016/j.aca.2022.339733 · Cited by 36
Advances in additive manufacturing of shape memory polymer composites
Garces, I. T., & Ayranci, C. (2021) · Rapid Prototyping Journal · doi:10.1108/rpj-07-2020-0174 · Cited by 35
A Review on Printing of Responsive Smart and 4D Structures Using 2D Materials
Cataldi, P., Liu, M., Bissett, M. A., & Kinloch, I. A. (2022) · Advanced Materials Technologies · doi:10.1002/admt.202200025 · Cited by 35
Concepts and Terminologies in 4D Printing
Pei, E., Loh, G. H., & Nam, S. (2020) · Applied Sciences · doi:10.3390/app10134443 · Cited by 33
Biomimetic Skins Enable Strain‐Perception‐Strengthening Soft Morphing
Xiao, P., Zhou, W., Liang, Y., Kuo, S., Yang, Q., & Chen, T. (2022) · Advanced Functional Materials · doi:10.1002/adfm.202201812 · Cited by 33
McCracken, J. M., Rauzan, B. M., Kjellman, J. C. E., Kandel, M. E., Liu, Y. H., Badea, A., Miller, L. A., Rogers, S. A., Popescu, G., & Nuzzo, R. G. (2018) · Advanced Healthcare Materials · doi:10.1002/adhm.201800788 · Cited by 32
4D Printing of a Fully Biobased Shape Memory Copolyester via a UV-Assisted FDM Strategy
Wu, D., Leng, Y.-M., Fan, C., Xu, Z., Li, L., Shi, L., Yang, K., & Wang, Y. (2022) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.2c00721 · Cited by 32
Brooks, S. L., Cartwright, Z., Merckle, D., & Weems, A. C. (2021) · Polymer Composites · doi:10.1002/pc.26211 · Cited by 31
Twisted composite structures made by 4D printing method
Hoa, S. V., & Cai, X. (2020) · Composite Structures · doi:10.1016/j.compstruct.2020.111883 · Cited by 30
Challenges for Technology Innovation: An Agenda for the Future
Buono, M., & Capece, S. (2017) · CRC Press eBooks · doi:10.1201/9781315198101 · Cited by 29
Zou, B., Song, C. L., He, Z., & Ju, J. (2022) · Extreme Mechanics Letters · doi:10.1016/j.eml.2022.101779 · Cited by 29
Additive manufacturing with shape changing/memory materials: A review on 4D printing technology
Patil, A. N., & Sarje, S. H. (2021) · Materials Today Proceedings · doi:10.1016/j.matpr.2020.11.907 · Cited by 28
Programming the microstructure of magnetic nanocomposites in DLP 3D printing
Lantean, S., Roppolo, I., Sangermano, M., Hayoun, M., Dammak, H., & Rizza, G. (2021) · Additive manufacturing · doi:10.1016/j.addma.2021.102343 · Cited by 28
On bioinspired 4d printing: materials, design and potential applications
Tee, Y. L., & Tran, P. (2021) · Australian Journal of Mechanical Engineering · doi:10.1080/14484846.2021.1988434 · Cited by 28
Controlled helical deformation of programmable bilayer structures: design and fabrication
Feng, Y., Xu, J., Zeng, S., Gao, Y., & Tan, J. (2020) · Smart Materials and Structures · doi:10.1088/1361-665x/ab905d · Cited by 27
Development of 4D-printed shape memory polymer large-stroke XY micropositioning stages
Cheah, D. S., Alshebly, Y. S., Ali, M. S. M., & Marwan Nafea, M. (2022) · Journal of Micromechanics and Microengineering · doi:10.1088/1361-6439/ac68ca · Cited by 27
Hansen, A., Renner, M., Griesbeck, A. G., & Büsgen, T. (2020) · Chemical Communications · doi:10.1039/d0cc06512a · Cited by 26
Bardakova, K. N., Kholkhoev, B. C., Farion, I. A., Epifanov, E. O., Korkunova, O. S., Efremov, Y. M., Minaev, N. V., Solovieva, A. B., Timashev, P. S., & Бурдуковский, В. Ф. (2021) · Advanced Materials Technologies · doi:10.1002/admt.202100790 · Cited by 26
Four-Dimensional Printed Shape Memory Metasurface to Memorize Absorption and Reflection Functions
Jeong, H., Park, E., & Lim, S. (2021) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.1c17968 · Cited by 26
Multi-Trigger Thermo-Electro-Mechanical Soft Actuators under Large Deformations
Yarali, E., Noroozi, R., Yousefi, A., Bodaghi, M., & Baghani, M. (2020) · Polymers · doi:10.3390/polym12020489 · Cited by 25
Self-citationMerckle, D., Constant, E., Cartwright, Z., & Weems, A. C. (2021) · Macromolecules · doi:10.1021/acs.macromol.0c02401 · Cited by 25
Design of a continuous fiber trajectory for 4D printing of thermally stimulated composite structures
Tian, X., Wang, Q., & Li, D. (2020) · Science China Technological Sciences · doi:10.1007/s11431-019-1485-5 · Cited by 24
Deformable Bowtie Antenna Realized by 4D Printing
Wu, L., Huang, J., Zhai, M., Sun, B., Chang, H., Huang, S., & Liu, H. (2021) · Electronics · doi:10.3390/electronics10151792 · Cited by 22
Single-Layer 4D Printing System Using Focused Light: A Tool for Untethered Microrobot Applications
Li, H., Darmawan, B. A., Go, G., Kim, S., Nan, M., Kang, B., Kim, H., Lee, S. B., Bang, D., Park, J., et al. (2021) · Chemistry of Materials · doi:10.1021/acs.chemmater.1c01854 · Cited by 22
Formation of letters in the alphabet using 4D printing of composites
Hoa, S. V., & Rosca, I. D. (2020) · Materials Today Communications · doi:10.1016/j.mtcomm.2020.101115 · Cited by 21
CuS/polyurethane composite appropriate for 4D printing
Vitola, V., Bite, I., Apsite, I., Zolotarjovs, A., & Biswas, A. (2021) · Journal of Polymer Research · doi:10.1007/s10965-020-02375-z · Cited by 20
Development of omega stiffeners using 4D printing of composites
Hoa, S. V., Reddy, B., & Rosca, I. D. (2021) · Composite Structures · doi:10.1016/j.compstruct.2021.114264 · Cited by 19
Liu, Y., Liu, R., Qiu, J., & Wang, S. (2021) · Journal of Advanced Manufacturing and Processing · doi:10.1002/amp2.10107 · Cited by 18
Ranjan, N., Kumar, R., Singh, R., & Kumar, V. (2021) · Journal of Thermoplastic Composite Materials · doi:10.1177/08927057211059754 · Cited by 18
A 4D-Printed Structure With Reversible Deformation for the Soft Crawling Robot
Duan, G., Liu, H., Liu, Z., & Tan, J. (2022) · Frontiers in Materials · doi:10.3389/fmats.2022.850722 · Cited by 16
Bio-Inspired 4D Printing of Dynamic Spider Silks
Li, G., Tian, Q., Wu, W., Yang, S., Wu, Q., Zhao, Y., Wang, J., Zhou, X., Wang, K., Ren, L., et al. (2022) · Polymers · doi:10.3390/polym14102069 · Cited by 16
Modern concepts and application of soft robotics in 4D printing
Kumar, S. B., Sekar, S., Sivakumar, G., Srinivas, J., Lavanya, R., & Suresh, G. (2021) · Journal of Physics Conference Series · doi:10.1088/1742-6596/2054/1/012056 · Cited by 14
Han, M., Li, L., & Zhao, J. (2022) · Additive manufacturing · doi:10.1016/j.addma.2022.102894 · Cited by 14
Hart, L. R., He, Y., Ruiz‐Cantu, L., Zhou, Z., Irvine, D. J., Wildman, R. D., & Hayes, W. (2019) · Elsevier eBooks · doi:10.1016/b978-0-12-816805-9.00015-6 · Cited by 12
Finite element modeling of shape memory polyurethane foams for treatment of cerebral aneurysms
Jarrah, H. R., Zolfagharian, A., & Bodaghi, M. (2021) · Biomechanics and Modeling in Mechanobiology · doi:10.1007/s10237-021-01540-7 · Cited by 12
Self-citationPatterning, morphing, and coding of gel composites by direct ink writing
Sui, Y., Li, C., Feng, S., Ling, Y., Li, C., Wu, X., Shen, J., Song, J. J., Peng, H., & Huang, W. (2021) · Journal of Materials Chemistry A · doi:10.1039/d0ta12275k · Cited by 11
Multi-Material Production of 4D Shape Memory Polymer Composites
Nyabadza, A., Kane, J., Vázquez, M., Sreenilayam, S. P., & Brabazon, D. (2021) · Elsevier eBooks · doi:10.1016/b978-0-12-819724-0.00057-4 · Cited by 11
Cortés, A., Sánchez–Romate, X. F., Aguilar, J. L., Jiménez‐Suárez, A., Campo, M., & Prolongo, S. G. (2021) · Composites Science and Technology · doi:10.1016/j.compscitech.2021.109185 · Cited by 8
Cited by
Wang, H., Zhang, W., Ladika, D., Yu, H., Gailevičius, D., Wang, H., Pan, C., Nair, P. N. S., Ke, Y., Mori, T., et al. (2023) · Advanced Functional Materials · doi:10.1002/adfm.202214211 · Cited by 401
Arif, Z. U., Khalid, M. Y., Noroozi, R., Sadeghianmaryan, A., Jalalvand, M., & Hossain, M. (2022) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2022.07.140 · Cited by 395
Self-citationAdvances in 3D printing for polymer composites: A review
Ma, T., Zhang, Y., Ruan, K., Guo, H., He, M., Shi, X., Guo, Y., Kong, J., & Gu, J. (2024) · InfoMat · doi:10.1002/inf2.12568 · Cited by 310
4D Printing for Biomedical Applications
Yarali, E., Mirzaali, M. J., Ghalayaniesfahani, A., Accardo, A., Diaz‐Payno, P. J., & Zadpoor, A. A. (2024) · Advanced Materials · doi:10.1002/adma.202402301 · Cited by 257
Various FDM Mechanisms Used in the Fabrication of Continuous-Fiber Reinforced Composites: A Review
Karimi, A., Rahmatabadi, D., & Baghani, M. (2024) · Polymers · doi:10.3390/polym16060831 · Cited by 201
Metadata
- Authors
- Khalid, M. Y., Arif, Z. U., Noroozi, R., Zolfagharian, A., & Bodaghi, M.
- Venue
- Journal of Manufacturing Processes
- Publisher
- Elsevier BV
- Published
- 2022-09
- Volume
- 81
- Pages
- 759-797
- ISSN
- 1526-6125 (ISSN-L)
- OpenAlex
- W4287509591
- Cited by
- 336
- References
- 386
- FWCI
- 26.74
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.