The DOI matches its Crossref record; 42 of the 42 references it cites were found in a registry or an index.
A high-entropy silicide: (Mo0.2Nb0.2Ta0.2Ti0.2W0.2)Si2
Open accessAbstract
A high-entropy metal disilicide, (Mo0.2Nb0.2Ta0.2Ti0.2W0.2)Si2, has been successfully synthesized. X-ray diffraction (XRD), energy dispersive X-ray spectroscopy (EDX), and electron backscatter diffraction (EBSD) collectively show the formation of a single high-entropy silicide phase. This high-entropy (Mo0.2Nb0.2Ta0.2Ti0.2W0.2)Si2 possesses a hexagonal C40 crystal structure with ABC stacking sequence and a space group of P6222. This discovery expands the known families of high-entropy materials from metals, oxides, borides, carbides, and nitrides to a silicide, for the first time to our knowledge, as well as demonstrating that a new, non-cubic, crystal structure (with lower symmetry) can be made into high-entropy phase. This (Mo0.2Nb0.2Ta0.2Ti0.2W0.2)Si2 exhibits high nanohardness of 16.7 ± 1.9 GPa and Vickers hardness of 11.6 ± 0.5 GPa. Moreover, it has a low thermal conductivity of 6.9 ± 1.1 W m−1 K−1, which is approximately one order of magnitude lower than that of the widely-used tetragonal MoSi2 and ∼1/3 of those reported values for the hexagonal NbSi2 and TaSi2 with the same crystal structure.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Yeh, J. ‐., Chen, S. ‐., Lin, S. ‐., Gan, J. ‐., Chin, T. ‐., Shun, T. ‐., Tsau, C. ‐., & Chang, S. ‐. (2004) · Advanced Engineering Materials · doi:10.1002/adem.200300567 · Cited by 15,281
Microstructural development in equiatomic multicomponent alloys
Cantor, B., Chang, I. T. H., Knight, P., & Vincent, A. J. B. (2004) · Materials Science and Engineering: A · doi:10.1016/j.msea.2003.10.257 · Cited by 10,130
A critical review of high entropy alloys and related concepts
Miracle, D. B., & Senkov, O. N. (2017) · Acta Materialia · doi:10.1016/j.actamat.2016.08.081 · Cited by 8,973
Microstructures and properties of high-entropy alloys
Zhang, Y., Zuo, T. T., Tang, Z., Gao, M. C., Dahmen, K. A., Liaw, P. K., & Lu, Z. P. (2014) · Progress in Materials Science · doi:10.1016/j.pmatsci.2013.10.001 · Cited by 7,128
Rost, C. M., Sachet, E., Borman, T., Moballegh, A., Dickey, E. C., Hou, D., Jones, J. L., Curtarolo, S., & Maria, J.-P. (2015) · Nature Communications · doi:10.1038/ncomms9485 · Cited by 3,525
High-Entropy Alloys: A Critical Review
Tsai, M.-H., & Yeh, J.-W. (2014) · Materials Research Letters · doi:10.1080/21663831.2014.912690 · Cited by 3,477
Development and exploration of refractory high entropy alloys—A review
Senkov, O. N., Miracle, D. B., Chaput, K. J., & Couzinie, J.-P. (2018) · Journal of Materials Research · doi:10.1557/jmr.2018.153 · Cited by 1,631
Analysis of heat flow in layered structures for time-domain thermoreflectance
Cahill, D. G. (2004) · Review of Scientific Instruments · doi:10.1063/1.1819431 · Cited by 1,543
High entropy oxides for reversible energy storage
Sarkar, A., Velasco, L., Wang, D., Wang, Q., Talasila, G., de Biasi, L., Kübel, C., Brezesinski, T., Bhattacharya, S. S., Hahn, H., et al. (2018) · Nature Communications · doi:10.1038/s41467-018-05774-5 · Cited by 1,351
Yeh, J.-W., Lin, S.-J., Chin, T.-S., Gan, J.-Y., Chen, S.-K., Shun, T.-T., Tsau, C.-H., & Chou, S.-Y. (2004) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-006-0234-4 · Cited by 1,252
Gild, J., Zhang, Y., Harrington, T., Jiang, S., Hu, T., Quinn, M. C., Mellor, W. M., Zhou, N., Vecchio, K., & Luo, J. (2016) · Scientific Reports · doi:10.1038/srep37946 · Cited by 1,241
Self-citationHigh-entropy high-hardness metal carbides discovered by entropy descriptors
Sarker, P., Harrington, T., Toher, C., Oses, C., Samiee, M., Maria, J.-P., Brenner, D. W., Vecchio, K. S., & Curtarolo, S. (2018) · Nature Communications · doi:10.1038/s41467-018-07160-7 · Cited by 1,082
Self-citationA new class of high-entropy perovskite oxides
Jiang, S., Hu, T., Gild, J., Zhou, N., Nie, J., Qin, M., Harrington, T., Vecchio, K., & Luo, J. (2018) · Scripta Materialia · doi:10.1016/j.scriptamat.2017.08.040 · Cited by 962
Self-citationProcessing and Properties of High-Entropy Ultra-High Temperature Carbides
Castle, E., Csanádi, T., Grasso, S., Dusza, J., & Reece, M. (2018) · Scientific Reports · doi:10.1038/s41598-018-26827-1 · Cited by 873
Room temperature lithium superionic conductivity in high entropy oxides
Bérardan, D., Franger, S., Meena, A. K., & Dragoe, N. (2016) · Journal of Materials Chemistry A · doi:10.1039/c6ta03249d · Cited by 766
Phase stability and mechanical properties of novel high entropy transition metal carbides
Harrington, T. J., Gild, J., Sarker, P., Toher, C., Rost, C. M., Dippo, O. F., McElfresh, C., Kaufmann, K., Marin, E., Borowski, L., et al. (2019) · Acta Materialia · doi:10.1016/j.actamat.2018.12.054 · Cited by 737
Self-citationColossal dielectric constant in high entropy oxides
Bérardan, D., Franger, S., Dragoe, D., Meena, A. K., & Dragoe, N. (2016) · physica status solidi (RRL) - Rapid Research Letters · doi:10.1002/pssr.201600043 · Cited by 693
Gild, J., Samiee, M., Braun, J. L., Harrington, T., Vega, H., Hopkins, P. E., Vecchio, K., & Luo, J. (2018) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2018.04.010 · Cited by 636
Self-citationDąbrowa, J., Stygar, M., Mikuła, A., Knapik, A., Mroczka, K., Tejchman, W., Danielewski, M., & Martin, M. (2018) · Materials Letters · doi:10.1016/j.matlet.2017.12.148 · Cited by 628
(Hf 0.2 Zr 0.2 Ta 0.2 Nb 0.2 Ti 0.2 )C high‐entropy ceramics with low thermal conductivity
Yan, X., Constantin, L., Lu, Y., Silvain, J., Nastasi, M., & Cui, B. (2018) · Journal of the American Ceramic Society · doi:10.1111/jace.15779 · Cited by 614
Zhang, Y., Yeh, J., Sun, J., Lin, J. P., & Yao, K.-F. (2015) · Advances in Materials Science and Engineering · doi:10.1155/2015/781303 · Cited by 594
Rare earth and transition metal based entropy stabilised perovskite type oxides
Sarkar, A., Djenadic, R., Wang, D., Hein, C., Kautenburger, R., Clemens, O., & Hahn, H. (2018) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2017.12.058 · Cited by 577
Mechanochemical‐Assisted Synthesis of High‐Entropy Metal Nitride via a Soft Urea Strategy
Jin, T., Sang, X., Unocic, R. R., Kinch, R. T., Liu, X., Hu, J., Liu, H., & Dai, S. (2018) · Advanced Materials · doi:10.1002/adma.201707512 · Cited by 539
Charge‐Induced Disorder Controls the Thermal Conductivity of Entropy‐Stabilized Oxides
Braun, J. L., Rost, C. M., Lim, M., Giri, A., Olson, D. H., Kotsonis, G. N., Stan, G., Brenner, D. W., Maria, J., & Hopkins, P. E. (2018) · Advanced Materials · doi:10.1002/adma.201805004 · Cited by 509
Self-citationHigh-entropy carbide: A novel class of multicomponent ceramics
Zhou, J., Zhang, J., Zhang, F., Niu, B., Lei, L., & Wang, W. (2018) · Ceramics International · doi:10.1016/j.ceramint.2018.08.100 · Cited by 463
Jiang, P., Qian, X., & Yang, R. (2018) · Journal of Applied Physics · doi:10.1063/1.5046944 · Cited by 424
A five-component entropy-stabilized fluorite oxide
Chen, K., Pei, X., Tang, L., Cheng, H., Li, Z., Li, C., Zhang, X., & An, L. (2018) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2018.04.063 · Cited by 391
Ye, B., Wen, T., Huang, K., Wang, C., & Chu, Y. (2019) · Journal of the American Ceramic Society · doi:10.1111/jace.16295 · Cited by 389
Multicomponent equiatomic rare earth oxides
Djenadic, R., Sarkar, A., Clemens, O., Loho, C., Botros, M., Chakravadhanula, V. S. K., Kübel, C., Bhattacharya, S. S., Gandhi, A. S., & Hahn, H. (2017) · Materials Research Letters · doi:10.1080/21663831.2016.1220433 · Cited by 357
Nanostructured multi-element (TiZrNbHfTa)N and (TiZrNbHfTa)C hard coatings
Braic, V., Vladescu, A., Balaceanu, M., Luculescu, C. R., & Braic, M. (2012) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2011.09.033 · Cited by 309
Synthesis of single-phase high-entropy carbide powders
Feng, L., Fahrenholtz, W. G., Hilmas, G. E., & Zhou, Y. (2018) · Scripta Materialia · doi:10.1016/j.scriptamat.2018.10.049 · Cited by 270
Novel processing route for the fabrication of bulk high-entropy metal diborides
Tallarita, G., Licheri, R., Garroni, S., Orrù, R., & Cao, G. (2019) · Scripta Materialia · doi:10.1016/j.scriptamat.2018.08.039 · Cited by 239
Microstructure of (Hf-Ta-Zr-Nb)C high-entropy carbide at micro and nano/atomic level
Dusza, J., Švec, P., Girman, V., Sedlák, R., Castle, E. G., Csanádi, T., Kovalčíková, A., & Reece, M. J. (2018) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2018.05.006 · Cited by 234
High-entropy ceramic thin films; A case study on transition metal diborides
Mayrhofer, P. H., Kirnbauer, A., Ertelthaler, P., & Koller, C. M. (2018) · Scripta Materialia · doi:10.1016/j.scriptamat.2018.02.008 · Cited by 218
Single-crystal high entropy perovskite oxide epitaxial films
Sharma, Y., Musicó, B. L., Gao, X., Hua, C., May, A. F., Herklotz, A., Rastogi, A., Mandrus, D., Yan, J., Lee, H. N., et al. (2018) · Physical Review Materials · doi:10.1103/physrevmaterials.2.060404 · Cited by 211
Molybdenum Silicide Based Materials and Their Properties
Yao, Z., Stiglich, J., & Sudarshan, T. S. (1999) · Journal of Materials Engineering and Performance · doi:10.1361/105994999770346837 · Cited by 164
Demirskyi, D., Borodianska, H., Suzuki, T. S., Sakka, Y., Yoshimi, K., & Vasylkiv, O. (2019) · Scripta Materialia · doi:10.1016/j.scriptamat.2019.01.024 · Cited by 163
MoSi2-Based High-Temperature Structural Silicides
PETROVIC, J. J. (1993) · MRS Bulletin · doi:10.1557/s0883769400037519 · Cited by 151
Yang, Y., Wang, W., Gan, G., Shi, X.-F., & Tang, B. (2018) · Physica B Condensed Matter · doi:10.1016/j.physb.2018.09.014 · Cited by 122
Giri, A., Braun, J. L., Rost, C. M., & Hopkins, P. E. (2017) · Scripta Materialia · doi:10.1016/j.scriptamat.2017.05.045 · Cited by 80
Self-citationHard and superhard materials: A computational perspective
Tehrani, A. M., & Brgoch, J. (2018) · Journal of Solid State Chemistry · doi:10.1016/j.jssc.2018.10.048 · Cited by 59
Giri, A., Braun, J. L., & Hopkins, P. E. (2018) · Journal of Applied Physics · doi:10.1063/1.5010337 · Cited by 30
Self-citation
Cited by
Oses, C., Toher, C., & Curtarolo, S. (2020) · Nature Reviews Materials · doi:10.1038/s41578-019-0170-8 · Cited by 2,081
High-entropy ceramics: Present status, challenges, and a look forward
Xiang, H., Xing, Y., Dai, F.-Z., Wang, H., Su, L., Miao, L., Zhang, G., Wang, Y., Qi, X., Yao, L., et al. (2021) · Journal of Advanced Ceramics · doi:10.1007/s40145-021-0477-y · Cited by 1,109
High-entropy ceramics: Review of principles, production and applications
Akrami, S., Edalati, P., Fuji, M., & Edalati, K. (2021) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2021.100644 · Cited by 1,008
Advances in ultra-high temperature ceramics, composites, and coatings
Ni, D., Cheng, Y., Zhang, J., Liu, J.-X., Zou, J., Chen, B., Wu, H., Li, H., Dong, S., Han, J., et al. (2022) · Journal of Advanced Ceramics · doi:10.1007/s40145-021-0550-6 · Cited by 789
Review of high entropy ceramics: design, synthesis, structure and properties
Zhang, R.-Z., & Reece, M. J. (2019) · Journal of Materials Chemistry A · doi:10.1039/c9ta05698j · Cited by 760
Metadata
- Authors
- Gild, J., Braun, J., Kaufmann, K., Marin, E., Harrington, T., Hopkins, P., Vecchio, K., & Luo, J.
- Venue
- Journal of Materiomics
- Publisher
- Elsevier BV
- Published
- 2019-09
- Volume
- 5
- Issue
- 3
- Pages
- 337-343
- ISSN
- 2352-8478 (ISSN-L)
- OpenAlex
- W2915048070
- Cited by
- 343
- References
- 42
- FWCI
- 22.75
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.