Indirect 3D bioprinting and characterization of alginate scaffolds for potential nerve tissue engineering applications
Open accessThe DOI matches its Crossref record; 4 of the 4 references it cites were found in a registry or an index.
Abstract
Low-concentration hydrogels have favorable properties for many cell functions in tissue engineering but are considerably limited from a scaffold fabrication point of view due to poor three-dimensional (3D) printability. Here, we developed an indirect-bioprinting process for alginate scaffolds and characterized the potential of these scaffolds for nerve tissue engineering applications. The indirect-bioprinting process involves (1) printing a sacrificial framework from gelatin, (2) impregnating the framework with low-concentration alginate, and (3) removing the gelatin framework by an incubation process, thus forming low-concentration alginate scaffolds. The scaffolds were characterized by compression testing, swelling, degradation, and morphological and biological assessment of incorporated or seeded Schwann cells. For comparison, varying concentrations of alginate scaffolds (from 0.5% to 3%) were fabricated and sterilized using either ultraviolet light or ethanol. Results indicated that scaffolds can be fabricated using the indirect-bioprinting process, wherein the scaffold properties are affected by the concentration of alginate and sterilization technique used. These factors provide effective means of regulating the properties of scaffolds fabricated using the indirect-bioprinting process. Cell-incorporated scaffolds demonstrated better cell viability than bulk gels. In addition, scaffolds showed better cell functionality when fabricated with a lower concentration of alginate compared to a higher concentration. The indirect-bioprinting process that we implemented could be extended to other types of low-concentration hydrogels to address the tradeoffs between printability and properties for favorable cell functions.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Direct-write bioprinting of cell-laden methacrylated gelatin hydrogels
Bertassoni, L. E., Cardoso, J. C., Manoharan, V., Cristino, A. L., Bhise, N. S., Araujo, W. A., Zorlutuna, P., Vrana, N. E., Ghaemmaghami, A. M., Dokmeci, M. R., et al. (2014) · Biofabrication · doi:10.1088/1758-5082/6/2/024105 · Cited by 642
Skardal, A., Devarasetty, M., Kang, H.-W., Mead, I., Bishop, C., Shupe, T., Lee, S. J., Jackson, J., Yoo, J., Soker, S., et al. (2015) · Acta Biomaterialia · doi:10.1016/j.actbio.2015.07.030 · Cited by 428
Sarker, M., Izadifar, M., Schreyer, D., & Chen, X. (2018) · Journal of Biomaterials Science, Polymer Edition · doi:10.1080/09205063.2018.1433420 · Cited by 109
Self-citationExtrusion Bioprinting of Scaffolds for Tissue Engineering Applications
Chen, D. X. B. (2019) · doi:10.1007/978-3-030-03460-3 · Cited by 101
Self-citation
Cited by
Ions-induced gelation of alginate: Mechanisms and applications
Hu, C., Lu, W., Mata, A., Nishinari, K., & Fang, Y. (2021) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2021.02.086 · Cited by 600
Krishani, M., Shin, W. Y., Suhaimi, H., & Sambudi, N. S. (2023) · Gels · doi:10.3390/gels9020100 · Cited by 328
Printability–A key issue in extrusion-based bioprinting
Naghieh, S., & Chen, X. (2021) · Journal of Pharmaceutical Analysis · doi:10.1016/j.jpha.2021.02.001 · Cited by 270
Self-citationMallakpour, S., Azadi, E., & Hussain, C. M. (2021) · Advances in Colloid and Interface Science · doi:10.1016/j.cis.2021.102436 · Cited by 178
Natural polymer-based scaffolds for soft tissue repair
Chen, M., Jiang, R., Deng, N., Zhao, X., Li, X., & Guo, C. (2022) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2022.954699 · Cited by 57
“In addition, alginate-based scaffolds with the features of high cell viability and low concentration alginate for potential nerve tissue engineering application were developed (Naghieh et al., 2019).”
Method
Metadata
- Authors
- Naghieh, S., Sarker, M. D., Abelseth, E., & Chen, X.
- Venue
- Journal of the Mechanical Behavior of Biomedical Materials
- Publisher
- Elsevier BV
- Published
- 2019-05
- Volume
- 93
- Pages
- 183-193
- ISSN
- 1751-6161 (ISSN-L)
- OpenAlex
- W2913467155
- Cited by
- 109
- References
- 4
- FWCI
- 5.06
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Indirect 3D bioprinting and characterization of alginate scaffolds for potential nerve tissue engineering applications. https://app.cochat.ai/papers/10.1016/j.jmbbm.2019.02.014
- The paper
- Naghieh, S., Sarker, M. D., Abelseth, E., & Chen, X. (2019). Indirect 3D bioprinting and characterization of alginate scaffolds for potential nerve tissue engineering applications. Journal of the Mechanical Behavior of Biomedical Materials. https://doi.org/10.1016/j.jmbbm.2019.02.014
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.