The DOI matches its Crossref record; 92 of the 92 references it cites were found in a registry or an index.
Grain refinement of magnesium alloys by dynamic recrystallization (DRX): A review
Open accessAbstract
During elevated-temperature thermomechanical processing, the occurrence of recrystallization during straining is known as dynamic recrystallization (DRX), which usually happens in Mg alloys during practical hot deformation processes such as rolling, forging, extrusion, friction stir processing (FSP), and multidirectional forging (MDF). Accordingly, the present review paper is dedicated to the grain refinement of Mg alloys by DRX and summarization of the state-of-the-art. Firstly, the grain refinement of Mg alloys is overviewed, which includes grain refinement achieved during (I) solidification (heterogeneous nucleant particles, growth restriction factor, and ultrasonic treatment), (II) additive manufacturing, (III) annealing of deformed alloys via static recrystallization (SRX), and (IV) severe plastic deformation (SPD). Afterward, the critical conditions for the initiation of DRX, single-peak and multiple-peak (cyclic) flow behaviors, microstructural evolution, and necklace formation during DRX are summarized for Mg alloys. Moreover, the dependency of the DRX grain size and its kinetics to the (I) deformation conditions (temperature and strain rate, as represented by the Zener-Hollomon parameter), (II) initial microstructure (by consideration of continuous and discontinuous DRX mechanisms), (III) alloying elements (solute drag effect), (IV) dynamic precipitation (Zener pinning effect for retardation of grain coarsening), and (V) particle stimulated nucleation (PSN, especially for the Mg alloys containing long period stacking ordered (LPSO) structures and metal-matrix composites) are critically discussed. Furthermore, the metadynamic recrystallization (MDRX) and improvement of mechanical properties by DRX are overviewed. Finally, the research gaps and distinct suggestions for future works are introduced.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Effect of Strain Rate Upon Plastic Flow of Steel
Zener, C., & Hollomon, J. H. (1944) · Journal of Applied Physics · doi:10.1063/1.1707363 · Cited by 2,844
Dynamic and post-dynamic recrystallization under hot, cold and severe plastic deformation conditions
Sakai, T., Belyakov, A., Kaibyshev, R., Miura, H., & Jonas, J. J. (2014) · Progress in Materials Science · doi:10.1016/j.pmatsci.2013.09.002 · Cited by 2,772
On the mechanism of hot deformation
Sellars, C. M., & McTegart, W. J. (1966) · Acta Metallurgica · doi:10.1016/0001-6160(66)90207-0 · Cited by 1,985
Lin, Y., & Chen, X.-M. (2010) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2010.11.048 · Cited by 1,396
Correlation of plastic deformation and dynamic recrystallization in magnesium alloy ZK60
Galiyev, A., Kaibyshev, R. O., & Gottstein, G. (2001) · Acta Materialia · doi:10.1016/s1359-6454(01)00020-9 · Cited by 1,217
Constitutive analysis in hot working
McQueen, H. J., & Ryan, N. D. (2002) · Materials Science and Engineering A · doi:10.1016/s0921-5093(01)01117-0 · Cited by 1,082
Heidarzadeh, A., Mironov, S., Kaibyshev, R., Çam, G., Simar, A., Gerlich, A., Khodabakhshi, F., Mostafaei, A., Field, D. P., Robson, J. D., et al. (2021) · Progress in Materials Science · doi:10.1016/j.pmatsci.2020.100752 · Cited by 1,048
Overview no. 35 Dynamic recrystallization: Mechanical and microstructural considerations
Sakai, T., & Jonas, J. J. (1984) · Acta Metallurgica · doi:10.1016/0001-6160(84)90049-x · Cited by 1,020
Poliak, E. I., & Jonas, J. J. (1996) · Acta Materialia · doi:10.1016/1359-6454(95)00146-7 · Cited by 992
Recent progress of reinforcement materials: a comprehensive overview of composite materials
Rajak, D. K., Pagar, D. D., Kumar, R., & Pruncu, C. I. (2019) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2019.09.068 · Cited by 883
Hall-Petch relationship in Mg alloys: A review
Yu, H., Xin, Y., Wang, M., & Liu, Q. J. (2017) · Journal of Material Science and Technology · doi:10.1016/j.jmst.2017.07.022 · Cited by 844
The role and significance of Magnesium in modern day research-A review
Prasad, S. V. S., Prasad, S. B., Verma, K., Mishra, R. K., Kumar, V., & Singh, S. (2022) · Journal of Magnesium and Alloys · doi:10.1016/j.jma.2021.05.012 · Cited by 683
Structural evolutions of metallic materials processed by severe plastic deformation
Cao, Y., Ni, S., Liao, X., Song, M., & Zhu, Y. (2018) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2018.06.001 · Cited by 633
Nanomaterials by severe plastic deformation: review of historical developments and recent advances
Edalati, K., Bachmaier, A., Beloshenko, V. A., Beygelzimer, Y., Blank, V. D., Botta, W. J., Bryła, K., Čížek, J., Divinski, S., Enikeev, N. A., et al. (2022) · Materials Research Letters · doi:10.1080/21663831.2022.2029779 · Cited by 592
Current research progress in grain refinement of cast magnesium alloys: A review article
Ali, Y., Qiu, D., Jiang, B., Pan, F., & Zhang, M. (2014) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2014.09.061 · Cited by 589
Dynamic recrystallization in nickel and nickel-iron alloys during high temperature deformation
Luton, M. J., & Sellars, C. M. (1969) · Acta Metallurgica · doi:10.1016/0001-6160(69)90049-2 · Cited by 565
Defects and anomalies in powder bed fusion metal additive manufacturing
Mostafaei, A., Zhao, C., He, Y., Reza Ghiaasiaan, S., Shi, B., Shao, S., Shamsaei, N., Wu, Z., Kouraytem, N., Sun, T., et al. (2022) · Current Opinion in Solid State and Materials Science · doi:10.1016/j.cossms.2021.100974 · Cited by 491
Necklace formation during dynamic recrystallization: mechanisms and impact on flow behavior
Ponge, D., & Gottstein, G. (1998) · Acta Materialia · doi:10.1016/s1359-6454(97)00233-4 · Cited by 478
Imandoust, A., Barrett, C. D., Al-Samman, T., Inal, K. A., & El Kadiri, H. (2017) · Journal of Materials Science · doi:10.1007/s10853-016-0371-0 · Cited by 458
Theory and Applicability of a Recrystallized Grain Size Paleopiezometer
Twiss, R. J. (1977) · Birkhäuser Basel eBooks · doi:10.1007/978-3-0348-5745-1_13 · Cited by 440
The dependence of grain size on stress during dynamic recrystallisation
Derby, B. (1991) · Acta Metallurgica et Materialia · doi:10.1016/0956-7151(91)90295-c · Cited by 404
Dynamic Recrystallization in Pure Magnesium
Шамилевич, С. О., & Kaibyshev, R. O. (2001) · MATERIALS TRANSACTIONS · doi:10.2320/matertrans.42.1928 · Cited by 352
Palanivel, S., Nelaturu, P., Glass, B., & Mishra, R. S. (2015) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2014.09.082 · Cited by 336
Twinning, dynamic recovery and recrystallization in hot worked Mg–Al–Zn alloy
Михайлович, М. М., McQueen, H. J., Mwembela, A., & Konopleva, E. V. (2002) · Materials Science and Engineering A · doi:10.1016/s0921-5093(02)00007-2 · Cited by 332
Effect of grain boundaries on texture formation during dynamic recrystallization of magnesium alloys
Barrett, C. D., Imandoust, A., Oppedal, A. L., Inal, K., Tschopp, M. A., & Kadiri, H. E. (2017) · Acta Materialia · doi:10.1016/j.actamat.2017.01.063 · Cited by 332
Recent advances in grain refinement of light metals and alloys
Easton, M. A., Qian, M., Prasad, A., & StJohn, D. H. (2016) · Current Opinion in Solid State and Materials Science · doi:10.1016/j.cossms.2015.10.001 · Cited by 308
Modelling discontinuous dynamic recrystallization using a physically based model for nucleation
Cram, D. G., Zurob, H. S., Brechet, Y. J. M., & Hutchinson, C. R. (2009) · Acta Materialia · doi:10.1016/j.actamat.2009.07.024 · Cited by 299
Microstructural Development during Hot Working of Mg-3Al-1Zn
Beer, A. G., & Barnett, M. R. (2007) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-007-9207-5 · Cited by 282
Nucleation and microtexture development under dynamic recrystallization of copper
Wusatowska-Sarnek, A. M., Miura, H., & Sakai, T. (2002) · Materials Science and Engineering A · doi:10.1016/s0921-5093(01)01336-3 · Cited by 279
Bairagi, D., & Mandal, S. (2022) · Journal of Magnesium and Alloys · doi:10.1016/j.jma.2021.09.005 · Cited by 272
Recent progress and perspectives in additive manufacturing of magnesium alloys
Zeng, Z., Salehi, M., Kopp, A., Xu, S., Esmaily, M., & Birbilis, N. (2022) · Journal of Magnesium and Alloys · doi:10.1016/j.jma.2022.03.001 · Cited by 264
High temperature deformation behavior and dynamic recrystallization in CoCrFeNiMn high entropy alloy
Stepanov, N. D., Shaysultanov, D. G., Yurchenko, N. Y., Zherebtsov, S. V., Ladygin, A. N., Salishchev, G. A., & Tikhonovsky, M. A. (2015) · Materials Science and Engineering: A · doi:10.1016/j.msea.2015.03.097 · Cited by 262
EBSD study of a hot deformed austenitic stainless steel
Mirzadeh, H., Cabrera, J.-M., Najafizadeh, A., & Rodríguez-Calvillo, P. (2012) · Materials Science and Engineering A · doi:10.1016/j.msea.2012.01.037 · Cited by 260
Self-citationDerby, B., & Ashby, M. F. (1987) · Scripta Metallurgica · doi:10.1016/0036-9748(87)90341-3 · Cited by 254
Dehghan‐Manshadi, A., Barnett, M. R., & Hodgson, P. D. (2008) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-008-9512-7 · Cited by 252
Effect of crystallographic texture and twinning on the corrosion behavior of Mg alloys: A review
Gerashi, E., Alizadeh, R., & Langdon, T. G. (2022) · Journal of Magnesium and Alloys · doi:10.1016/j.jma.2021.09.009 · Cited by 247
Guo, J., Zhou, Y., Liu, C., Wu, Q., Chen, X., & Lu, J. (2016) · Materials · doi:10.3390/ma9100823 · Cited by 241
Quantitative prediction of texture effect on Hall–Petch slope for magnesium alloys
Guan, B., Xin, Y., Huang, X., Wu, P., & Liu, Q. (2019) · Acta Materialia · doi:10.1016/j.actamat.2019.05.016 · Cited by 227
Predicting the Critical Stress for Initiation of Dynamic Recrystallization
Najafizadeh, A., & Jonas, J. J. (2006) · ISIJ International · doi:10.2355/isijinternational.46.1679 · Cited by 225
Fernández-Calvo, A. I., Uranga, P., LOPEZ, B., & Rodriguez-Ibabe, J. M. (2003) · Materials Science and Engineering A · doi:10.1016/s0921-5093(03)00562-8 · Cited by 224
Microstructure and mechanical properties of selective laser melted magnesium
Ng, C. C., Savalani, M. M., Lau, M. L., & Man, H. C. (2011) · Applied Surface Science · doi:10.1016/j.apsusc.2011.03.004 · Cited by 208
Effect of initial grain size on dynamic recrystallization in high purity austenitic stainless steels
Wahabi, M. E., Gavard, L., Montheillet, F., Cabrera, J.-M., & Prado, J. M. (2005) · Acta Materialia · doi:10.1016/j.actamat.2005.06.020 · Cited by 198
Dynamic Evolution of New Grains in Magnesium Alloy AZ31 during Hot Deformation
Yang, X., Miura, H., & Sakai, T. (2003) · MATERIALS TRANSACTIONS · doi:10.2320/matertrans.44.197 · Cited by 193
Grain-Size Effects during Dynamic Recrystallization of Nickel
Sah, J. P., RICHARDSON, G. J., & Sellars, C. M. (1974) · Metal Science · doi:10.1179/msc.1974.8.1.325 · Cited by 184
Motallebi, R., Savaedi, Z., & Mirzadeh, H. (2022) · Current Opinion in Solid State and Materials Science · doi:10.1016/j.cossms.2022.100992 · Cited by 178
Self-citationHigh strain rate superplasticity via friction stir processing (FSP): A review
Mirzadeh, H. (2021) · Materials Science and Engineering A · doi:10.1016/j.msea.2021.141499 · Cited by 174
Self-citationEffect of initial grain size on dynamic recrystallization of copper
Błaż, L., Sakai, T., & Jonas, J. J. (1983) · Metal Science · doi:10.1179/030634583790420448 · Cited by 168
Zhang, H., Xiao, H., Fang, X., Zhang, Q., Logé, R. E., & Huang, K. (2020) · Materials & Design · doi:10.1016/j.matdes.2020.108873 · Cited by 150
Esmaily, M., Zeng, Z., Mortazavi, A. N., Gullino, A., Choudhary, S., Derra, T., Benn, F., D’Elia, F., Müther, M., Thomas, S., et al. (2020) · Additive manufacturing · doi:10.1016/j.addma.2020.101321 · Cited by 147
Drury, M. R., Humphreys, F. J., & White, S. H. (1985) · Physics of The Earth and Planetary Interiors · doi:10.1016/0031-9201(85)90131-1 · Cited by 145
Constitutive analysis of Mg–Al–Zn magnesium alloys during hot deformation
Mirzadeh, H. (2014) · Mechanics of Materials · doi:10.1016/j.mechmat.2014.07.004 · Cited by 135
Self-citationLi, J., Qiu, Y., Yang, J., Sheng, Y., Yi, Y., Zeng, X., Chen, L., Yin, F., Su, J.-Z., Zhang, T., et al. (2021) · Journal of Magnesium and Alloys · doi:10.1016/j.jma.2021.04.007 · Cited by 131
The effect of solute on discontinuous dynamic recrystallization
Cram, D. G., Fang, X., Zurob, H. S., Brechet, Y. J. M., & Hutchinson, C. R. (2012) · Acta Materialia · doi:10.1016/j.actamat.2012.08.021 · Cited by 122
Williams, M. B., Robinson, T. W., Williamson, C. J., Kinser, R. P., Ashmore, N. A., Allison, P., & Jordon, J. B. (2021) · Metals · doi:10.3390/met11111739 · Cited by 116
Motallebi, R., Savaedi, Z., & Mirzadeh, H. (2022) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2022.07.154 · Cited by 113
Self-citationFactors affecting dynamic recrystallization of metals and alloys
Ueki, M., Horie, S., & Nakamura, T. (1987) · Materials Science and Technology · doi:10.1179/mst.1987.3.5.329 · Cited by 109
Factors affecting dynamic recrystallization of metals and alloys
Ueki, M., Horie, S., & NAKAMURA, T. (1987) · Materials Science and Technology · doi:10.1179/026708387790122585 · Cited by 109
Qiu, D., Zhang, M., & Kelly, P. (2009) · Scripta Materialia · doi:10.1016/j.scriptamat.2009.04.011 · Cited by 93
Luo, X. C., Kang, L. M., Liu, H. L., Li, Z. J., Liu, Y. F., Zhang, D. T., & Chen, D. L. (2020) · Materials Science and Engineering A · doi:10.1016/j.msea.2020.139945 · Cited by 93
Dependency of Recrystallization Mechanism to the Initial Grain Size
Dehghan‐Manshadi, A., & Hodgson, P. D. (2008) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-008-9656-5 · Cited by 92
Jiang, M. G., Xu, C., Yan, H. G., Lu, S., Nakata, T., Lao, C., Chen, R. S., Kamado, S., & Han, E. (2018) · Scientific Reports · doi:10.1038/s41598-018-35170-4 · Cited by 91
Saboori, A., Abdi, A., Fatemi, S. A., Marchese, G., Biamino, S., & Mirzadeh, H. (2020) · Materials Science and Engineering A · doi:10.1016/j.msea.2020.139822 · Cited by 90
Self-citationLi, Y., Hou, P., Wu, Z., Feng, Z., Ren, Y., & Choo, H. (2021) · Materials & Design · doi:10.1016/j.matdes.2021.109562 · Cited by 85
Stress and temperature dependence of recrystallized grain size: A subgrain misorientation model
Shimizu, I. (1998) · Geophysical Research Letters · doi:10.1029/1998gl900136 · Cited by 84
Malik, A., Wang, Y., Huanwu, C., Nazeer, F., Ahmed, B., Khan, M. A., & Mingjun, W. (2019) · Materials Science and Engineering A · doi:10.1016/j.msea.2019.138649 · Cited by 84
Cai, Y., Sun, C., Li, Y., Hu, S., Zhu, N., Barker, E., & Qian, L. (2020) · International Journal of Plasticity · doi:10.1016/j.ijplas.2020.102773 · Cited by 83
Tikhonova, M., Kaibyshev, R. O., & Belyakov, A. N. (2018) · Advanced Engineering Materials · doi:10.1002/adem.201700960 · Cited by 81
Dynamic recrystallization in ultra fine-grained 304 stainless steel
Belyakov, A. N., Miura, H., & Sakai, T. (2000) · Scripta Materialia · doi:10.1016/s1359-6462(00)00373-0 · Cited by 77
Mirzadeh, H. (2014) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2014.09.029 · Cited by 72
Self-citationGrain size evolution during discontinuous dynamic recrystallization
Galindo-Nava, E. I., & Rivera-Díaz-del-Castillo, P. E. J. (2013) · Scripta Materialia · doi:10.1016/j.scriptamat.2013.09.020 · Cited by 71
Proceedings of the 8th Pacific Rim International Congress on Advanced Materials and Processing
Marquis, F. D. S. (2016) · Springer eBooks · doi:10.1007/978-3-319-48764-9 · Cited by 67
Derazkola, H. A., García, E., Murillo-Marrodán, A., & Méresse, D. (2021) · Metals · doi:10.3390/met11040572 · Cited by 66
Esmaeilpour, H., Zarei‐Hanzaki, A., Eftekhari, N., Abedi, H. R., & Ferdowsi, M. R. G. (2020) · Materials Science and Engineering A · doi:10.1016/j.msea.2020.139021 · Cited by 64
A controlling factor for dynamic recrystallisation
Sandström, R., & Lagneborg, R. (1975) · Scripta Metallurgica · doi:10.1016/0036-9748(75)90146-5 · Cited by 62
Wang, J., Wu, Z., Gao, S., Lu, R., Qin, D., Yang, W., & Pan, F. (2015) · Journal of Magnesium and Alloys · doi:10.1016/j.jma.2015.02.001 · Cited by 62
Zhu, H., Chen, F., Zhang, H., & Cui, Z. (2019) · Science China Technological Sciences · doi:10.1007/s11431-019-9548-x · Cited by 56
Effect of initial microstructure on the dynamic recrystallization behavior of Mg–Gd–Y–Zr alloy
Wu, W., Jin, L., Dong, J., Zhang, Z., & Ding, W. (2012) · Materials Science and Engineering A · doi:10.1016/j.msea.2012.07.021 · Cited by 53
Dynamic recrystallization behavior of AZ31-0.5Ca magnesium alloy during warm rolling
Chaudry, U. M., Kim, T. H., Kim, Y. S., Hamad, K., Ko, Y. G., & Kim, J. (2019) · Materials Science and Engineering A · doi:10.1016/j.msea.2019.138085 · Cited by 49
Critical Strain for Dynamic Recrystallisation. The Particular Case of Steels
Varela-Castro, G., Cabrera, J.-M., & Prado, J. M. (2020) · Metals · doi:10.3390/met10010135 · Cited by 49
Unveiling the strengthening mechanisms of as-cast micro-alloyed CrMnFeCoNi high-entropy alloys
Zamani, M. R., Mirzadeh, H., Malekan, M., Weißensteiner, I., & Roostaei, M. (2023) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2023.170443 · Cited by 49
Self-citationSheng, D., Taylor, T., Khan, S. A., Sato, Y., & Yanagimoto, J. (2021) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2021.117359 · Cited by 43
Effect of Initial Grain Size on Dynamically Recrystallized Grain Size in AZ31 Magnesium Alloy
Takigawa, Y., Honda, M., Uesugi, T., & Higashi, K. (2008) · MATERIALS TRANSACTIONS · doi:10.2320/matertrans.maw200829 · Cited by 40
Savaedi, Z., Mirzadeh, H., Aghdam, R. M., & Mahmudi, R. (2022) · Materials Today Communications · doi:10.1016/j.mtcomm.2022.104825 · Cited by 37
Self-citationLiu, G., Mao, C., Ding, R., Yu, L., Liu, C., & Liu, Y. (2021) · Journal of Nuclear Materials · doi:10.1016/j.jnucmat.2021.153285 · Cited by 31
Sajadi, S. A., Toroghinejad, M. R., Rezaeian, A., & Ebrahimi, G. R. (2022) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2022.07.055 · Cited by 31
Ultrafine-Grained Stainless Steels after Severe Plastic Deformation
Dolzhenko, P., Tikhonova, M., Odnobokova, M., Kaibyshev, R. O., & Belyakov, A. N. (2023) · Metals · doi:10.3390/met13040674 · Cited by 29
Effect of Initial Grain Size on Dynamic Recrystallization of Pure Nickel
Ohashi, M., Endo, T., & Sakai, T. (1990) · Journal of the Japan Institute of Metals and Materials · doi:10.2320/jinstmet1952.54.4_435 · Cited by 26
Phase-Field Modeling of Nugget Zone for a AZ31-Mg-Alloy Friction Stir Weld
Prosgolitis, C. G., Lambrakos, S. G., & Zervaki, A. D. (2018) · Journal of Materials Engineering and Performance · doi:10.1007/s11665-018-3471-y · Cited by 24
Improvement of mechanical properties of in situ Mg-Si composites via Cu addition and hot working
Maleki, M., Mirzadeh, H., & Emamy, M. (2022) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2022.164176 · Cited by 22
Self-citationMicrostructure and mechanical properties of friction stir welded ultralight Mg-14Li-1Al alloy
Xu, N., Qiu, Z., Ren, Z., Wang, D., Shen, J., Song, Q., Zhao, J., & Bao, Y. (2022) · Materials Characterization · doi:10.1016/j.matchar.2022.112463 · Cited by 19
Kou, Y., Wang, J., Fu, Q., Mei, D., Sun, Y., Wang, J., Wang, L., Zhu, S., & Guan, S. (2021) · Materials Today Communications · doi:10.1016/j.mtcomm.2021.102384 · Cited by 15
Zhao, R., Jia, W., Ma, L., Ning, F., Xie, H., & Yuan, Y. (2022) · Materials Today Communications · doi:10.1016/j.mtcomm.2022.104097 · Cited by 8
Cited by
Sahoo, S. N., Avula, I., Mandal, S., Pal, S., Balla, V. K., & Roy, M. (2025) · Journal of Materials Chemistry B · doi:10.1039/d5tb00488h · Cited by 3
Metadata
- Authors
- Mirzadeh, H.
- Venue
- Journal of Materials Research and Technology
- Publisher
- Elsevier BV
- Published
- 2023-07
- Volume
- 25
- Pages
- 7050-7077
- ISSN
- 2214-0697 (ISSN-L)
- 2238-7854
- OpenAlex
- W4384937545
- Cited by
- 354
- References
- 92
- FWCI
- 39.61
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.