The DOI matches its Crossref record; 93 of the 93 references it cites were found in a registry or an index.
A review of selective laser melting of aluminum alloys: Processing, microstructure, property and developing trends
Abstract
Abstract Selective laser melting (SLM) is an attractive rapid prototyping technology for the fabrication of metallic components with complex structure and high performance. Aluminum alloy, one of the most pervasive structural materials, is well known for high specific strength and good corrosion resistance. But the poor laser formability of aluminum alloy restricts its application. There are problems such as limited processable materials, immature process conditions and metallurgical defects on SLM processing aluminum alloys. Some efforts have been made to solve the above problems. This paper discusses the current research status both related to the scientific understanding and technology applications. The paper begins with a brief introduction of basic concepts of aluminum alloys and technology characterization of laser selective melting. In addition, solidification theory of SLM process and formation mechanism of metallurgical defects are discussed. Then, the current research status of microstructure, properties and heat treatment of SLM processing aluminum alloys is systematically reviewed respectively. Lastly, a future outlook is given at the end of this review paper.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Friction stir welding and processing
Mishra, R. S., & Ma, Z. Y. (2005) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2005.07.001 · Cited by 6,753
Laser additive manufacturing of metallic components: materials, processes and mechanisms
Gu, D. D., Meiners, W., Wissenbach, K., & Poprawe, R. (2012) · International Materials Reviews · doi:10.1179/1743280411y.0000000014 · Cited by 3,197
3D printing of high-strength aluminium alloys
Martin, J. H., Yahata, B. D., Hundley, J. M., Mayer, J. A., Schaedler, T. A., & Pollock, T. M. (2017) · Nature · doi:10.1038/nature23894 · Cited by 2,950
A study of the microstructural evolution during selective laser melting of Ti–6Al–4V
Thijs, L., Verhaeghe, F., Craeghs, T., Humbeeck, J. V., & Kruth, J.-P. (2010) · Acta Materialia · doi:10.1016/j.actamat.2010.02.004 · Cited by 2,929
Review of selective laser melting: Materials and applications
Yap, C. Y., Chua, C. K., Dong, Z. L., Liu, Z. H., Zhang, D. Q., Loh, L. E., & Sing, S. L. (2015) · Applied Physics Reviews · doi:10.1063/1.4935926 · Cited by 2,353
Williams, J. C., & Starke, E. A. (2003) · Acta Materialia · doi:10.1016/j.actamat.2003.08.023 · Cited by 2,342
Residual stresses in selective laser sintering and selective laser melting
Mercelis, P., & Kruth, J. (2006) · Rapid Prototyping Journal · doi:10.1108/13552540610707013 · Cited by 2,015
Thijs, L., Kempen, K., Kruth, J.-P., & Van Humbeeck, J. (2013) · Acta Materialia · doi:10.1016/j.actamat.2012.11.052 · Cited by 1,917
Olakanmi, E. O., Cochrane, R. F., & Dalgarno, K. W. (2015) · Progress in Materials Science · doi:10.1016/j.pmatsci.2015.03.002 · Cited by 1,742
Microstructural and mechanical characteristics of in situ metal matrix composites
Tjong, S. (2000) · Materials Science and Engineering: R: Reports · doi:10.1016/s0927-796x(00)00024-3 · Cited by 1,722
Metal Fabrication by Additive Manufacturing Using Laser and Electron Beam Melting Technologies
Murr, L. E., Gaytan, S. M., Ramirez, D. A., Martinez, E., Hernandez, J., Amato, K. N., Shindo, P. W., Medina, F. R., & Wicker, R. B. (2012) · Journal of Materials Science & Technology · doi:10.1016/s1005-0302(12)60016-4 · Cited by 1,686
Observation of keyhole-mode laser melting in laser powder-bed fusion additive manufacturing
King, W. E., Barth, H. D., Castillo, V. M., Gallegos, G. F., Gibbs, J. W., Hahn, D. E., Kamath, C., & Rubenchik, A. M. (2014) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2014.06.005 · Cited by 1,616
Selective laser melting of iron-based powder
Kruth, J. P., Froyen, L., Van Vaerenbergh, J., Mercelis, P., Rombouts, M., & Lauwers, B. (2004) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2003.11.051 · Cited by 1,550
Application of modern aluminum alloys to aircraft
Starke, E. A., & Staley, J. T. (1996) · Progress in Aerospace Sciences · doi:10.1016/0376-0421(95)00004-6 · Cited by 1,463
Consolidation phenomena in laser and powder-bed based layered manufacturing
Kruth, J.-P., Levy, G., Klocke, F., & Childs, T. H. C. (2007) · CIRP Annals · doi:10.1016/j.cirp.2007.10.004 · Cited by 1,444
Reducing porosity in AlSi10Mg parts processed by selective laser melting
Aboulkhair, N. T., Everitt, N. M., Ashcroft, I., & Tuck, C. (2014) · Additive Manufacturing · doi:10.1016/j.addma.2014.08.001 · Cited by 1,281
Read, N., Wang, W., Essa, K., & Attallah, M. M. (2015) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2014.09.044 · Cited by 1,218
Brandl, E., Heckenberger, U., Holzinger, V., & Buchbinder, D. (2012) · Materials & Design · doi:10.1016/j.matdes.2011.07.067 · Cited by 1,151
Gu, D., Hagedorn, Y.-C., Meiners, W., Meng, G., Batista, R. J. S., Wissenbach, K., & Poprawe, R. (2012) · Acta Materialia · doi:10.1016/j.actamat.2012.04.006 · Cited by 1,089
Sing, S. L., An, J., Yeong, W. Y., & Wiria, F. E. (2016) · Journal of Orthopaedic Research · doi:10.1002/jor.23075 · Cited by 942
Gong, H., Rafi, K., Gu, H., Janaki Ram, G. D., Starr, T., & Stucker, B. (2015) · Materials & Design · doi:10.1016/j.matdes.2015.07.147 · Cited by 940
Selective laser melting of aluminium components
Louvis, E., Fox, P., & Sutcliffe, C. J. (2011) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2010.09.019 · Cited by 933
Jia, Q., & Gu, D. (2014) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2013.09.171 · Cited by 905
Li, W., Li, S., Liu, J., Zhang, A., Zhou, Y., Wei, Q., Yan, C., & Shi, Y. (2016) · Materials Science and Engineering: A · doi:10.1016/j.msea.2016.03.088 · Cited by 850
Self-citationSingle track formation in selective laser melting of metal powders
Yadroitsev, I., Gusarov, A., Yadroitsava, I., & Smurov, I. (2010) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2010.05.010 · Cited by 827
The microstructure and mechanical properties of deposited-IN718 by selective laser melting
Wang, Z., Guan, K., Gao, M., Li, X., Chen, X., & Zeng, X. (2012) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2011.10.107 · Cited by 812
Prashanth, K. G., Scudino, S., Klauss, H. J., Surreddi, K. B., Löber, L., Wang, Z., Chaubey, A. K., Kühn, U., & Eckert, J. (2014) · Materials Science and Engineering: A · doi:10.1016/j.msea.2013.10.023 · Cited by 803
Carter, L. N., Martin, C., Withers, P. J., & Attallah, M. M. (2014) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2014.06.172 · Cited by 751
Solidification microstructures and solid-state parallels: Recent developments, future directions
Asta, M., Beckermann, C., Karma, A., Kurz, W., Napolitano, R., Plapp, M., Purdy, G., Rappaz, M., & Trivedi, R. (2009) · Acta Materialia · doi:10.1016/j.actamat.2008.10.020 · Cited by 712
Hussein, A., Hao, L., Yan, C., & Everson, R. (2013) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2013.05.070 · Cited by 706
Aboulkhair, N. T., Maskery, I., Tuck, C., Ashcroft, I., & Everitt, N. M. (2016) · Materials Science and Engineering: A · doi:10.1016/j.msea.2016.04.092 · Cited by 675
On the fatigue crack growth behavior in 316L stainless steel manufactured by selective laser melting
Riemer, A., Leuders, S., Thöne, M., Richard, H. A., Tröster, T., & Niendorf, T. (2014) · Engineering Fracture Mechanics · doi:10.1016/j.engfracmech.2014.03.008 · Cited by 669
High Power Selective Laser Melting (HP SLM) of Aluminum Parts
Buchbinder, D., Schleifenbaum, H., Heidrich, S., Meiners, W., & Bültmann, J. (2011) · Physics Procedia · doi:10.1016/j.phpro.2011.03.035 · Cited by 666
Li, X. P., Wang, X. J., Saunders, M., Suvorova, A., Zhang, L. C., Liu, Y. J., Fang, M. H., Huang, Z. H., & Sercombe, T. B. (2015) · Acta Materialia · doi:10.1016/j.actamat.2015.05.017 · Cited by 654
Shipley, H., McDonnell, D., Culleton, M., Coull, R., Lupoi, R., O’Donnell, G. E., & Trimble, D. (2018) · International Journal of Machine Tools and Manufacture · doi:10.1016/j.ijmachtools.2018.01.003 · Cited by 643
Formation of metastable cellular microstructures in selective laser melted alloys
Prashanth, K. G., & Eckert, J. (2016) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2016.12.209 · Cited by 597
Residual Stress within Metallic Model Made by Selective Laser Melting Process
Shiomi, M., Osakada, K., Nakamura, K., Yamashita, T., & Abe, F. (2004) · CIRP Annals · doi:10.1016/s0007-8506(07)60677-5 · Cited by 591
Changing the alloy composition of Al7075 for better processability by selective laser melting
Montero-Sistiaga, M. L., Mertens, R., Vrancken, B., Wang, X., Hooreweder, B. V., Kruth, J., & Humbeeck, J. V. (2016) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2016.08.003 · Cited by 590
Formation and reduction of hydrogen porosity during selective laser melting of AlSi10Mg
Weingarten, C., Buchbinder, D., Pirch, N., Meiners, W., Wissenbach, K., & Poprawe, R. (2015) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2015.02.013 · Cited by 585
A study on the residual stress during selective laser melting (SLM) of metallic powder
Liu, Y., Yang, Y., & Wang, D. (2016) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-016-8466-y · Cited by 573
Zhang, H., Zhu, H., Qi, T., Hu, Z., & Zeng, X. (2016) · Materials Science and Engineering A · doi:10.1016/j.msea.2015.12.101 · Cited by 565
Suryawanshi, J., Prashanth, K. G., Scudino, S., Eckert, J., Prakash, O., & Ramamurty, U. (2016) · Acta Materialia · doi:10.1016/j.actamat.2016.06.009 · Cited by 549
Friction stir welded structural materials: beyond Al-alloys
Çam, G. (2011) · International Materials Reviews · doi:10.1179/095066010x12777205875750 · Cited by 548
Trevisan, F., Calignano, F., Lorusso, M., Pakkanen, J., Aversa, A., Ambrosio, E., Lombardi, M., Fino, P., & Manfredi, D. (2017) · Materials · doi:10.3390/ma10010076 · Cited by 502
Epitaxial laser metal forming: analysis of microstructure formation
Gäumann, M., Henry, S., Cléton, F., Wagnière, J.-D., & Kurz, W. (1999) · Materials Science and Engineering: A · doi:10.1016/s0921-5093(99)00202-6 · Cited by 501
Liu, Y., Yang, Y., Mai, S., Wang, D., & Song, C. (2015) · Materials & Design · doi:10.1016/j.matdes.2015.08.086 · Cited by 498
Zhang, H., Zhu, H., Nie, X., Yin, J., Hu, Z., & Zeng, X. (2017) · Scripta Materialia · doi:10.1016/j.scriptamat.2017.02.036 · Cited by 477
Yadroitsev, I., Krakhmalev, P., Yadroitsava, I., Johansson, S., & Smurov, I. (2013) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2012.11.014 · Cited by 471
Processing metallic glasses by selective laser melting
Pauly, S., Löber, L., Petters, R., Stoica, M., Scudino, S., Kühn, U., & Eckert, J. (2013) · Materials Today · doi:10.1016/j.mattod.2013.01.018 · Cited by 446
Recent Developments in Friction Stir Welding of Al-alloys
Çam, G., & Mıstıkoğlu, S. (2014) · Journal of Materials Engineering and Performance · doi:10.1007/s11665-014-0968-x · Cited by 428
Kobryn, P. A., Moore, E. H., & Semiatin, S. L. (2000) · Scripta Materialia · doi:10.1016/s1359-6462(00)00408-5 · Cited by 428
Olakanmi, E. O. (2013) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2013.03.009 · Cited by 418
Solid-state additive manufacturing and repairing by cold spraying: A review
Li, W., Yang, K., Yin, S., Yang, X., Xu, Y., & Lupoi, R. (2017) · Journal of Material Science and Technology · doi:10.1016/j.jmst.2017.09.015 · Cited by 414
Processing AlSi10Mg by selective laser melting: Parameter optimisation and material characterisation
Kempen, K., Thijs, L., Van Humbeeck, J., & Kruth, J.-P. (2015) · Materials Science and Technology · doi:10.1179/1743284714y.0000000702 · Cited by 410
Kimura, T., & Nakamoto, T. (2016) · Materials & Design · doi:10.1016/j.matdes.2015.10.065 · Cited by 404
Fundamentals of Selective Laser Melting of alloyed steel powders
Rombouts, M., Kruth, J. P., Froyen, L., & Mercelis, P. (2006) · CIRP Annals · doi:10.1016/s0007-8506(07)60395-3 · Cited by 400
Balling phenomena in selective laser melted tungsten
Zhou, X., Liu, X., Zhang, D., Shen, Z., & Liu, W. (2015) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2015.02.032 · Cited by 399
Gradient in microstructure and mechanical property of selective laser melted AlSi10Mg
Liu, Y., Liu, Z., Jiang, Y., Wang, G. W., Yang, Y., & Zhang, L. (2017) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2017.11.020 · Cited by 352
Yang, J., Han, J. C., Yu, H., Yin, J., Gao, M. X., Wang, Z., & Zeng, X. (2016) · Materials & Design · doi:10.1016/j.matdes.2016.08.036 · Cited by 346
Simonelli, M., Tuck, C., Aboulkhair, N. T., Maskery, I., Ashcroft, I., Wildman, R. D., & Hague, R. (2015) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-015-2882-8 · Cited by 342
Problems and issues in laser beam welding of aluminum–lithium alloys
Xiao, R., & Zhang, X. (2014) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2013.10.005 · Cited by 325
Chen, Y., Zhang, K., Huang, J., Hosseini, S. R. E., & Li, Z. (2016) · Materials & Design · doi:10.1016/j.matdes.2015.10.155 · Cited by 322
Kaufmann, N., Imran, M., Wischeropp, T. M., et al. (2016) · Physics Procedia · doi:10.1016/j.phpro.2016.08.096 · Cited by 314
A multiscale modeling approach for fast prediction of part distortion in selective laser melting
Li, C., Fu, C. H., Guo, Y. B., & Fang, F. (2015) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2015.10.022 · Cited by 308
Wei, P., Wei, Z., Chen, Z., Du, J., He, Y., Li, J., & Zhou, Y. (2017) · Applied Surface Science · doi:10.1016/j.apsusc.2017.02.215 · Cited by 307
Shi, Q., Gu, D., Xia, M., Cao, S., & Rong, T. (2016) · Optics & Laser Technology · doi:10.1016/j.optlastec.2016.04.009 · Cited by 292
Fousová, M., Dvorský, D., Michalcová, A., & Vojtěch, D. (2018) · Materials Characterization · doi:10.1016/j.matchar.2018.01.028 · Cited by 283
Microstructure prediction of selective laser melting AlSi10Mg using finite element analysis
Liu, S., Zhu, H., Peng, G., Yin, J., & Zeng, X. (2018) · Materials & Design · doi:10.1016/j.matdes.2018.01.022 · Cited by 279
The effect of atmosphere on the structure and properties of a selective laser melted Al–12Si alloy
Wang, X. J., Zhang, L., Fang, M., & Sercombe, T. B. (2014) · Materials Science and Engineering A · doi:10.1016/j.msea.2014.01.012 · Cited by 277
Functionally graded materials produced by laser cladding
Pei, Y. T., & Hosson, J. T. M. D. (2000) · Acta Materialia · doi:10.1016/s1359-6454(00)00065-3 · Cited by 266
Manufacturing by combining Selective Laser Melting and Selective Laser Erosion/laser re-melting
Yasa, E., Kruth, J.-P., & Deckers, J. (2011) · CIRP Annals · doi:10.1016/j.cirp.2011.03.063 · Cited by 265
Jia, Q., & Gu, D. (2014) · Optics & Laser Technology · doi:10.1016/j.optlastec.2014.03.008 · Cited by 260
Numerical modelling of welding
Lindgren, L.-E. (2006) · Computer Methods in Applied Mechanics and Engineering · doi:10.1016/j.cma.2005.08.018 · Cited by 257
Ma, M., Wang, Z., Gao, M. X., & Zeng, X. (2014) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2014.07.034 · Cited by 228
Recent Progress on Visible Light Responsive Heterojunctions for Photocatalytic Applications
Wang, S., Yun, J.-H., Luo, B., Butburee, T., Peerakiatkhajohn, P., Thaweesak, S., Xiao, M., & Wang, L. (2017) · Journal of Materials Science & Technology · doi:10.1016/j.jmst.2016.11.017 · Cited by 221
Microstructure and mechanical properties of selective laser melted magnesium
Ng, C. C., Savalani, M. M., Lau, M. L., & Man, H. C. (2011) · Applied Surface Science · doi:10.1016/j.apsusc.2011.03.004 · Cited by 208
Precipitation Reactions in Age-Hardenable Alloys During Laser Additive Manufacturing
Jägle, E. A., Sheng, Z., Wu, L., Lu, L., Risse, J., Weisheit, A., & Raabe, D. (2016) · JOM · doi:10.1007/s11837-015-1764-2 · Cited by 187
Olakanmi, E. O., Cochrane, R. F., & Dalgarno, K. W. (2011) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2010.09.003 · Cited by 171
Cao, X., Wallace, W., Immarigeon, J.-P., & Poon, C. (2003) · Materials and Manufacturing Processes · doi:10.1081/amp-120017587 · Cited by 164
Kang, N., Coddet, P., Chen, C., Wang, Y., Liao, H., & Coddet, C. (2016) · Materials & Design · doi:10.1016/j.matdes.2016.03.053 · Cited by 153
Dai, D., & Gu, D. (2015) · Applied Surface Science · doi:10.1016/j.apsusc.2015.07.044 · Cited by 147
Study of the Pore Formation on CoCrMo Alloys by Selective Laser Melting Manufacturing Process
Monroy, K. P., Delgado, J., & Ciurana, J. (2013) · Procedia Engineering · doi:10.1016/j.proeng.2013.08.227 · Cited by 147
Fatigue Strength Prediction for Titanium Alloy TiAl6V4 Manufactured by Selective Laser Melting
Leuders, S., Vollmer, M., Brenne, F., Tröster, T., & Niendorf, T. (2015) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-015-2864-x · Cited by 146
Gu, D., & Meiners, W. (2010) · Materials Science and Engineering A · doi:10.1016/j.msea.2010.08.075 · Cited by 136
Shi, X., Ma, S., Liu, C., & Wu, Q. (2016) · Optics & Laser Technology · doi:10.1016/j.optlastec.2016.11.002 · Cited by 130
Clare, A. T., Chalker, P. R., Davies, S., Sutcliffe, C. J., & Tsopanos, S. (2007) · International Journal of Mechanics and Materials in Design · doi:10.1007/s10999-007-9032-4 · Cited by 121
3D Finite Element Analysis in the selective laser melting process
Contuzzi, N., Campanelli, S. L., & Ludovico, A. D. (2011) · International Journal of Simulation Modelling · doi:10.2507/ijsimm10(3)1.169 · Cited by 118
Song, B., Dong, S., Coddet, P., Liao, H., & Coddet, C. (2013) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2013.07.010 · Cited by 108
Self-citationYang, Y., Lu, J., Luo, Z., & Wang, D. (2012) · Rapid Prototyping Journal · doi:10.1108/13552541211272027 · Cited by 94
Manufacturing Feasibility and Forming Properties of Cu-4Sn in Selective Laser Melting
Mao, Z., Zhang, D. Z., Wei, P., & Zhang, K. (2017) · Materials · doi:10.3390/ma10040333 · Cited by 64
Kang, N., Coddet, P., Liao, H., & Coddet, C. (2015) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2015.11.222 · Cited by 45
Wen, T. (2013) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2013.09.019 · Cited by 40
Morphology evolution mechanism of single tracks of FeAl intermetallics in selective laser melting
Song, B., Dong, S., Liao, H., & Coddet, C. (2012) · Materials Research Innovations · doi:10.1179/1433075x11y.0000000045 · Cited by 19
Self-citation
Cited by
Aboulkhair, N. T., Simonelli, M., Parry, L., Ashcroft, I., Tuck, C., & Hague, R. (2019) · Progress in Materials Science · doi:10.1016/j.pmatsci.2019.100578 · Cited by 1,552
Svetlizky, D., Das, M., Zheng, B., Vyatskikh, A. L., Bose, S., Bandyopadhyay, A., Schoenung, J. M., Lavernia, E. J., & Eliaz, N. (2021) · Materials Today · doi:10.1016/j.mattod.2021.03.020 · Cited by 1,371
Advanced lightweight materials for Automobiles: A review
Zhang, W., & Xu, J. (2022) · Materials & Design · doi:10.1016/j.matdes.2022.110994 · Cited by 1,147
Chowdhury, S., Yadaiah, N., Prakash, C., Ramakrishna, S., Dixit, S., Gupta, L. R., & Buddhi, D. (2022) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2022.07.121 · Cited by 784
Heat treatment for metal additive manufacturing
Laleh, M., Sadeghi, E., Revilla, R. I., Chao, Q., Haghdadi, N., Hughes, A. E., Xu, W., De Graeve, I., Qian, M., Gibson, I., et al. (2023) · Progress in Materials Science · doi:10.1016/j.pmatsci.2022.101051 · Cited by 538
Metadata
- Authors
- Zhang, J., Song, B., Wei, Q., Bourell, D., & Shi, Y.
- Venue
- Journal of Materials Science & Technology
- Publisher
- Elsevier BV
- Published
- 2019-02
- Volume
- 35
- Issue
- 2
- Pages
- 270-284
- ISSN
- 1005-0302 (ISSN-L)
- OpenAlex
- W2889876924
- Cited by
- 1,205
- References
- 93
- FWCI
- 55.48
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.