The DOI matches its Crossref record; 39 of the 39 references it cites were found in a registry or an index.
Long short-term memory for machine remaining life prediction
Abstract
Abstract Reliable tracking of performance degradation in dynamical systems such as manufacturing machines or aircraft engines and consequently, prediction of the remaining useful life (RUL) are one of the major challenges in realizing smart manufacturing. Traditional machine learning algorithms are often constrained in adapting to the complex and non-linear characteristics of manufacturing systems and processes. With the rapid development of modern computational hardware, Deep Learning has emerged as a promising computational technique for dynamical system prediction due to its enhanced capability to characterize the system complexity, overcoming the shortcomings of those traditional methods. In this paper, a new approach based on the Long Short-Term Memory (LSTM) network, an architecture that is specialized in discovering the underlying patterns embedded in time series, is proposed to track the system degradation and consequently, to predict the RUL. The objectives of this paper are: 1) translating the raw sensor data to an interpretable health index with the aim of better describing the system health condition; and 2) tracking the historical system degradation for accurate prediction of its future health condition. Evaluation using NASA’s C-MAPSS dataset verifies the effectiveness of the proposed method. Compared with other machine learning techniques, LSTM turns out to be more powerful and accurate in revealing degradation patterns, enabled by its time-dependent structure in nature.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Hochreiter, S., & Schmidhuber, J. (1997) · Neural Computation · doi:10.1162/neco.1997.9.8.1735 · Cited by 102,318
A fast learning algorithm for deep belief nets
Hinton, G. E., Osindero, S., & Teh, Y.-W. (2006) · Neural Computation · doi:10.1162/neco.2006.18.7.1527 · Cited by 16,336
Caffe: Convolutional Architecture for Fast Feature Embedding
Jia, Y., Shelhamer, E., Donahue, J., Karayev, S., Long, J., Girshick, R., Guadarrama, S., & Darrell, T. (2014) · Proceedings of the 22nd ACM international conference on Multimedia · doi:10.1145/2647868.2654889 · Cited by 11,077
Greff, K., Srivastava, R. K., Koutnik, J., Steunebrink, B. R., & Schmidhuber, J. (2017) · IEEE Transactions on Neural Networks and Learning Systems · doi:10.1109/tnnls.2016.2582924 · Cited by 6,955
Large-Scale Machine Learning with Stochastic Gradient Descent
Bottou, L. (2010) · Proceedings of COMPSTAT'2010 · doi:10.1007/978-3-7908-2604-3_16 · Cited by 5,795
Convolutional networks for images, speech, and time series
LeCun, Y., & Bengio, Y. (1998) · HAL (Le Centre pour la Communication Scientifique Directe) · doi:10.5555/303568.303704 · Cited by 4,231
Deep learning and its applications to machine health monitoring
Zhao, R., Yan, R., Chen, Z., Mao, K., Wang, P., & Gao, R. X. (2019) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2018.05.050 · Cited by 2,894
Self-citationA Critical Review of Recurrent Neural Networks for Sequence Learning
Lipton, Z. C., Berkowitz, J. A., & Elkan, C. (2015) · arXiv (Cornell University) · doi:10.48550/arxiv.1506.00019 · Cited by 1,996
Damage propagation modeling for aircraft engine run-to-failure simulation
Saxena, A., Goebel, K., Simon, D., & Eklund, N. (2008) · 2008 International Conference on Prognostics and Health Management · doi:10.1109/phm.2008.4711414 · Cited by 1,954
A Tutorial on Particle Filtering and Smoothing: Fifteen years later
Arnaud Doucet, B., & Johansen, A. M. (2008) · Cited by 1,449
Big data deep learning: Challenges and perspectives
Chen, X.-W., & Lin, X. (2014) · IEEE Access · doi:10.1109/access.2014.2325029 · Cited by 1,255
Learning multiple layers of representation
Hinton, G. E. (2007) · Trends in Cognitive Sciences · doi:10.1016/j.tics.2007.09.004 · Cited by 1,011
Deep Convolutional Neural Network Based Regression Approach for Estimation of Remaining Useful Life
Sateesh Babu, G., Zhao, P., & Li, X.-L. (2016) · Lecture Notes in Computer Science · doi:10.1007/978-3-319-32025-0_14 · Cited by 962
Lu, C., Wang, Z.-Y., Qin, W.-L., & Ma, J. (2017) · Signal Processing · doi:10.1016/j.sigpro.2016.07.028 · Cited by 775
Wu, D., Jennings, C., Terpenny, J., Gao, R. X., & Kumara, S. (2017) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.4036350 · Cited by 677
Self-citationHochreiter, S., & Schmidhuber, J. (1997) · Neural Computation · doi:10.1162/neco.1997.9.1.1 · Cited by 676
Lee, K. B., Cheon, S., & Kim, C. O. (2017) · IEEE Transactions on Semiconductor Manufacturing · doi:10.1109/tsm.2017.2676245 · Cited by 483
Cloud-enabled prognosis for manufacturing
Gao, R., Wang, L., Teti, R., Dornfeld, D., Kumara, S., Mori, M., & Helu, M. (2015) · CIRP Annals · doi:10.1016/j.cirp.2015.05.011 · Cited by 351
Self-citationLiu, K., Gebraeel, N. Z., & Shi, J. (2013) · IEEE Transactions on Automation Science and Engineering · doi:10.1109/tase.2013.2250282 · Cited by 332
A fog computing-based framework for process monitoring and prognosis in cyber-manufacturing
Wu, D., Liu, S., Zhang, L., Terpenny, J., Gao, R. X., Kurfess, T., & Guzzo, J. A. (2017) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2017.02.011 · Cited by 287
Self-citationLiao, L., Jin, W., & Pavel, R. (2016) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2016.2586442 · Cited by 285
Zhang, Y., Xiong, R., He, H., & Shen, W. (2017) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2016.2603229 · Cited by 235
Machine health monitoring with LSTM networks
Zhao, R., Wang, J., Yan, R., & Mao, K. (2016) · 2016 10th International Conference on Sensing Technology (ICST) · doi:10.1109/icsenst.2016.7796266 · Cited by 229
Self-citationPerformance-analysis-based gas turbine diagnostics: A review
Li, Y. G. (2002) · Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy · doi:10.1243/095765002320877856 · Cited by 211
A big data driven sustainable manufacturing framework for condition-based maintenance prediction
Kumar, A., Shankar, R., & Thakur, L. S. (2018) · Journal of Computational Science · doi:10.1016/j.jocs.2017.06.006 · Cited by 195
Sun, J., Zuo, H., Wang, W., & Pecht, M. G. (2012) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2011.09.029 · Cited by 191
A deep learning-based approach to material removal rate prediction in polishing
Wang, P. E., Gao, R. X., & Yan, R. (2017) · CIRP Annals · doi:10.1016/j.cirp.2017.04.013 · Cited by 167
Self-citationVirtualization and deep recognition for system fault classification
Wang, P., Ananya, Yan, R., & Gao, R. X. (2017) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2017.04.012 · Cited by 163
Self-citationDeep Learning and Its Applications to Machine Health Monitoring: A SurveyPreprint
Zhao, R., Yan, R., Chen, Z., Mao, K., Wang, P. E., & Gao, R. X. (2016) · arXiv (Cornell University) · doi:10.48550/arxiv.1612.07640 · Cited by 154
Self-citationMa, M., Sun, C., & Chen, X. (2017) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2017.2735661 · Cited by 143
Switching Kalman filter for failure prognostic
Lim, C. K. R., & Mba, D. (2014) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2014.08.006 · Cited by 114
Sequential Monte Carlo Methods for State and Parameter Estimation in Abruptly Changing Environments
Nemeth, C., Fearnhead, P., & Mihaylova, L. S. (2014) · IEEE Transactions on Signal Processing · doi:10.1109/tsp.2013.2296278 · Cited by 86
Mechanical state prediction based on LSTM neural netwok
Chen, Z., Liu, Y., & Liu, S. (2017) · Chinese Control Conference (CCC) · doi:10.23919/chicc.2017.8027963 · Cited by 75
Adaptive resampling-based particle filtering for tool life prediction
Wang, P. E., & Gao, R. X. (2015) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2015.04.006 · Cited by 74
Self-citationFusing Competing Prediction Algorithms for Prognostics
Goebel, K., Eklund, N. H. W., & Bonanni, P. G. (2006) · IEEE Aerospace Conference (AERO) · doi:10.1109/aero.2006.1656116 · Cited by 60
A face detection system using shunting inhibitory convolutional neural networks
Tivive, F. H. C., & Bouzerdoum, A. (2005) · International Joint Conference on Neural Networks (IJCNN) · doi:10.1109/ijcnn.2004.1381049 · Cited by 38
Prognostic Fusion for Uncertainty Reduction
Goebel, K., & Eklund, N. H. W. (2007) · AIAA Infotech@Aerospace 2007 Conference and Exhibit · doi:10.2514/6.2007-2843 · Cited by 31
Automated Performance Tracking for Heat Exchangers in HVAC
Wang, P. E., & Gao, R. X. (2017) · IEEE Transactions on Automation Science and Engineering · doi:10.1109/tase.2017.2666184 · Cited by 31
Self-citationA novel fusion strategy for failure prognostic of proton exchange membrane fuel cell stack
Yang, C., Li, Z., Liang, B., Cui, Q., Lu, W., & Yang, J. (2017) · Chinese Control Conference (CCC) · doi:10.23919/chicc.2017.8028470 · Cited by 17
Cited by
Li, T., Zhou, Z., Li, S., Sun, C., Yan, R., & Chen, X. (2022) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2021.108653 · Cited by 673
Self-citationMachine Remaining Useful Life Prediction via an Attention-Based Deep Learning Approach
Chen, Z., Wu, M., Zhao, R., Guretno, F., Yan, R., & Li, X. (2021) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2020.2972443 · Cited by 618
Self-citationArtificial Intelligence in Advanced Manufacturing: Current Status and Future Outlook
Arinez, J. F., Chang, Q., Gao, R. X., Xu, C., & Zhang, J. (2020) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.4047855 · Cited by 584
Self-citationAyvaz, S., & Alpay, K. (2021) · Expert Systems with Applications · doi:10.1016/j.eswa.2021.114598 · Cited by 550
Kamble, S. S., Gunasekaran, A., Ghadge, A., & Raut, R. (2020) · International Journal of Production Economics · doi:10.1016/j.ijpe.2020.107853 · Cited by 390
Metadata
- Authors
- Zhang, J., Wang, P., Yan, R., & Gao, R. X.
- Venue
- Journal of Manufacturing Systems
- Publisher
- Elsevier BV
- Published
- 2018-07
- Volume
- 48
- Pages
- 78-86
- ISSN
- 0278-6125 (ISSN-L)
- OpenAlex
- W2805330622
- Cited by
- 463
- References
- 39
- FWCI
- 26.99
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.