The DOI matches its Crossref record.
Efficient 3D Printed Pseudocapacitive Electrodes with Ultrahigh MnO2 Loading
Open accessAbstract
Summary Retaining sound electrochemical performance of electrodes at high mass loading holds significant importance to energy storage. Pseudocapacitive materials such as manganese oxide (MnO2) deposited on current collectors have achieved outstanding gravimetric capacitances, sometimes even close to their theoretical values. Yet, this is only achievable with very small mass loading of active material typically less than 1 mg cm−2. Increasing mass loading often leads to drastic decay of capacitive performance due to sluggish ion diffusion in bulk material. Here, we demonstrate a 3D printed graphene aerogel electrode with MnO2 loading of 182.2 mg cm−2, which achieves a record-high areal capacitance of 44.13 F cm−2. Most importantly, this 3D printed graphene aerogel/MnO2 electrode can simultaneously achieve excellent capacitance normalized to area, gravimetry, and volume, which is the trade-off for most electrodes. This work successfully validates the feasibility of printing practical pseudocapacitive electrodes, which might revolutionize pseudocapacitor fabrication.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
No references could be resolved yet.
Research works printed but not linked: 43
- Simon, 2008, Materials for electrochemical capacitors, Nat. Mater., 7, 845, 10.1038/nmat2297 · DOI · Paper page
- Augustyn, 2014, Pseudocapacitive oxide materials for high-rate electrochemical energy storage, Energy Environ. Sci., 7, 1597, 10.1039/c3ee44164d · DOI · Paper page
- Augustyn, 2013, High-rate electrochemical energy storage through Li+ intercalation pseudocapacitance, Nat. Mater., 12, 518, 10.1038/nmat3601 · DOI · Paper page
- Acerce, 2015, Metallic 1T phase MoS2 nanosheets as supercapacitor electrode materials, Nat. Nanotechnol., 10, 313, 10.1038/nnano.2015.40 · DOI · Paper page
- Lukatskaya, 2013, Cation intercalation and high volumetric capacitance of two-dimensional titanium carbide, Science, 341, 1502, 10.1126/science.1241488 · DOI · Paper page
- Ghidiu, 2014, Conductive two-dimensional titanium carbide 'clay' with high volumetric capacitance, Nature, 516, 78, 10.1038/nature13970 · DOI · Paper page
- Wang, 2015, Engineering of MnO2-based nanocomposites for high-performance supercapacitors, Prog. Mater. Sci., 74, 51, 10.1016/j.pmatsci.2015.04.003 · DOI · Paper page
- Lu, 2012, WO3-x@Au@MnO2 core-shell nanowires on carbon fabric for high-performance flexible supercapacitors, Adv. Mater., 24, 938, 10.1002/adma.201104113 · DOI · Paper page
- Lee, 1999, Supercapacitor behavior with KCl electrolyte, J. Solid State Chem., 144, 220, 10.1006/jssc.1998.8128 · DOI · Paper page
- Song, 2017, Ostwald ripening improves rate capability of high mass loading manganese oxide for supercapacitors, ACS Energy Lett., 2, 1752, 10.1021/acsenergylett.7b00405 · doi:10.1021/acsenergylett.7b00405
- Devaraj, 2008, Effect of crystallographic structure of MnO2 on its electrochemical capacitance properties, J. Phys. Chem. C, 112, 4406, 10.1021/jp7108785 · DOI
- Yang, 2014, Low-cost high-performance solid-state asymmetric supercapacitors based on MnO2 nanowires and Fe2O3 nanotubes, Nano Lett., 14, 731, 10.1021/nl404008e · DOI · Paper page
- Zhai, 2014, Oxygen vacancies enhancing capacitive properties of MnO2 nanorods for wearable asymmetric supercapacitors, Nano Energy, 8, 255, 10.1016/j.nanoen.2014.06.013 · DOI
- Kang, 2013, Enhanced supercapacitor performance of MnO2 by atomic doping, Angew. Chem. Int. Ed., 52, 1664, 10.1002/anie.201208993 · doi:10.1002/anie.201208993
- He, 2013, Freestanding three-dimensional graphene/MnO2 composite networks as ultralight and flexible supercapacitor electrodes, ACS Nano, 7, 174, 10.1021/nn304833s · DOI · Paper page
- Hu, 2011, Symmetrical MnO2-carbon nanotube-textile nanostructures for wearable pseudocapacitors with high mass loading, ACS Nano, 5, 8904, 10.1021/nn203085j · doi:10.1021/nn203085j
- El-Kady, 2015, Engineering three-dimensional hybrid supercapacitors and microsupercapacitors for high-performance integrated energy storage, Proc. Natl. Acad. Sci. U S A, 112, 4233, 10.1073/pnas.1420398112 · DOI · Paper page
- Zhu, 2016, Supercapacitors based on three-dimensional hierarchical graphene aerogels with periodic macropores, Nano Lett., 16, 3448, 10.1021/acs.nanolett.5b04965 · DOI · Paper page
- Zhu, 2015, Highly compressible 3D periodic graphene aerogel microlattices, Nat. Commun., 6, 6962, 10.1038/ncomms7962 · DOI · Paper page
- Sun, 2013, Multifunctional, ultra-flyweight, synergistically assembled carbon aerogels, Adv. Mater., 25, 2554, 10.1002/adma.201204576 · DOI · Paper page
- Yang, 2014, Nanostructured porous MnO2 on Ni foam substrate with a high mass loading via a CV electrodeposition route for supercapacitor application, Electrochim. Acta, 136, 189, 10.1016/j.electacta.2014.05.074 · doi:10.1016/j.electacta.2014.05.074
- Lv, 2012, Carbon fabric-aligned carbon nanotube/MnO2/conducting polymers ternary composite electrodes with high utilization and mass loading of MnO2 for super-capacitors, J. Power Sources, 220, 160, 10.1016/j.jpowsour.2012.07.073 · doi:10.1016/j.jpowsour.2012.07.073
- Zhai, 2015, An electrochemical capacitor with applicable energy density of 7.4 Wh/kg at average power density of 3000 W/kg, Nano Lett., 15, 3189, 10.1021/acs.nanolett.5b00321 · DOI
- Yao, 2013, Paper-based solid-state supercapacitors with pencil-drawing graphite/polyaniline networks hybrid electrodes, Nano Energy, 2, 1071, 10.1016/j.nanoen.2013.09.002 · DOI
- Lin, 2015, Nitrogen-doped mesoporous carbon of extraordinary capacitance for electrochemical energy storage, Science, 350, 1508, 10.1126/science.aab3798 · DOI · Paper page
- Yao, 2016, Flexible transparent molybdenum trioxide nanopaper for energy storage, Adv. Mater., 28, 6353, 10.1002/adma.201600529 · doi:10.1002/adma.201600529
- Yuan, 2013, Polypyrrole-coated paper for flexible solid-state energy storage, Energy Environ. Sci., 6, 470, 10.1039/c2ee23977a · DOI · Paper page
- Yang, 2013, Liquid-mediated dense integration of graphene materials for compact capacitive energy storage, Science, 341, 534, 10.1126/science.1239089 · DOI · Paper page
- Zhai, 2013, 3D MnO2-graphene composites with large areal capacitance for high-performance asymmetric supercapacitors, Nanoscale, 5, 6790, 10.1039/c3nr01589k · DOI · Paper page
- Xiao, 2013, Freestanding mesoporous VN/CNT hybrid electrodes for flexible all-solid-state supercapacitors, Adv. Mater., 25, 5091, 10.1002/adma.201301465 · DOI · Paper page
- Wu, 2016, A scalable free-standing V2O5/CNT film electrode for supercapacitors with a wide operation voltage (1.6 V) in an aqueous electrolyte, Adv. Funct. Mater., 26, 6114, 10.1002/adfm.201601811 · DOI
- Feng, 2018, Robust and conductive two-dimensional metal-organic frameworks with exceptionally high volumetric and areal capacitance, Nat. Energy, 3, 30, 10.1038/s41560-017-0044-5 · DOI · Paper page
- Vinny, 2016, An excellent cycle performance of asymmetric supercapacitor based on bristles like α-MnO2 nanoparticles grown on multiwalled carbon nanotubes, J. Power Sources, 309, 212, 10.1016/j.jpowsour.2016.01.098 · doi:10.1016/j.jpowsour.2016.01.098
- Xia, 2018, Thickness-independent capacitance of vertically aligned liquid-crystalline MXenes, Nature, 557, 409, 10.1038/s41586-018-0109-z · DOI · Paper page
- Zhang, 2018, Robust graphene composite films for multifunctional electrochemical capacitors with an ultrawide range of areal mass loading toward high-rate frequency response and ultrahigh specific capacitance, Energy Environ. Sci., 11, 559, 10.1039/C7EE03349D · DOI
- Wang, 2018, Inkjet printing of δ-MnO2 nanosheets for flexible solid-state micro-supercapacitor, Nano Energy, 49, 481, 10.1016/j.nanoen.2018.05.002 · doi:10.1016/j.nanoen.2018.05.002
- Haibo, 2016, 3D interdigital Au/MnO2/Au stacked hybrid electrodes for on-chip microsupercapacitors, Small, 12, 3059, 10.1002/smll.201503527 · DOI
- Chen, 2017, All-wood, low tortuosity, aqueous, biodegradable supercapacitors with ultra-high capacitance, Energy Environ. Sci., 10, 538, 10.1039/C6EE03716J · DOI · Paper page
- Nakayama, 2016, Direct growth of birnessite-type MnO2 on treated carbon cloth for a flexible asymmetric supercapacitor with excellent cycling stability, J. Electrochem. Soc., 163, A2340, 10.1149/2.1031610jes · doi:10.1149/2.1031610jes
- El-Kady, 2012, Laser scribing of high-performance and flexible graphene-based electrochemical capacitors, Science, 335, 1326, 10.1126/science.1216744 · DOI · Paper page
- Lu, 2012, Stabilized TiN nanowire arrays for high-performance and flexible supercapacitors, Nano Lett., 12, 5376, 10.1021/nl302761z · DOI · Paper page
- Cheng, 2015, Flexible and cross-linked N-doped carbon nanofiber network for high performance freestanding supercapacitor electrode, Nano Energy, 15, 66, 10.1016/j.nanoen.2015.04.007 · DOI · Paper page
- Song, 2017, Amorphous mixed-valence vanadium oxide/exfoliated carbon cloth structure shows a record high cycling stability, Small, 13, 1700067, 10.1002/smll.201700067 · doi:10.1002/smll.201700067
Cited by
Huang, J., Xie, Y., You, Y., Yuan, J., Xu, Q., Xie, H., & Chen, Y. (2023) · Advanced Functional Materials · doi:10.1002/adfm.202213095 · Cited by 448
Printed aerogels: chemistry, processing, and applications
Feng, J., Su, B.-L., Xia, H., Zhao, S., Gao, C., Wang, L., Ogbeide, O., Feng, J., & Hasan, T. (2021) · Chemical Society Reviews · doi:10.1039/c9cs00757a · Cited by 313
Direct ink writing of energy materials
Tagliaferri, S., Panagiotopoulos, A., & Mattevi, C. (2021) · Materials Advances · doi:10.1039/d0ma00753f · Cited by 281
Silica Aerogel: Synthesis, Characterization, Applications, and Recent Advancements
Rashid, A. B., Shishir, S. I., Mahfuz, M. A., Hossain, M. T., & Hoque, M. E. (2023) · Particle & Particle Systems Characterization · doi:10.1002/ppsc.202200186 · Cited by 86
Three-Dimensional Printed MoS2/Graphene Aerogel Electrodes for Hydrogen Evolution Reactions
Chandrasekaran, S., Feaster, J., Ynzunza, J., Li, F., Wang, X., Nelson, A. J., & Worsley, M. A. (2022) · ACS Materials Au · doi:10.1021/acsmaterialsau.2c00014 · Cited by 38
Self-citation
Metadata
- Authors
- Yao, B., Chandrasekaran, S., Zhang, J., Xiao, W., Qian, F., Zhu, C., Duoss, E. B., Spadaccini, C. M., Worsley, M. A., & Li, Y.
- Venue
- Joule
- Publisher
- Elsevier BV
- Published
- 2019-02
- Volume
- 3
- Issue
- 2
- Pages
- 459-470
- ISSN
- 2542-4351 (ISSN-L)
- OpenAlex
- W2896777062
- Cited by
- 491
- References
- 0
- FWCI
- 14.95
- Type
- journal article
- Language
- en
- Open access
- bronze
- Licence
- www.elsevier.com/tdm/userlicense/1.0/ (tdm)
- www.elsevier.com/legal/tdmrep-license (tdm)
- www.elsevier.com/open-access/userlicense/1.0/ (vor, 384 d)
- Funders
- NSF (MRI-1126845)
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Efficient 3D Printed Pseudocapacitive Electrodes with Ultrahigh MnO2 Loading. https://app.cochat.ai/papers/10.1016/j.joule.2018.09.020
- The paper
- Yao, B., Chandrasekaran, S., Zhang, J., Xiao, W., Qian, F., Zhu, C., Duoss, E. B., Spadaccini, C. M., Worsley, M. A., & Li, Y. (2019). Efficient 3D Printed Pseudocapacitive Electrodes with Ultrahigh MnO2 Loading. Joule. https://doi.org/10.1016/j.joule.2018.09.020
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.