The DOI matches its Crossref record; 48 of the 48 references it cites were found in a registry or an index; 4 of the 14 sources its claims cite were checked for support.
Three-Dimensional Printed MoS2/Graphene Aerogel Electrodes for Hydrogen Evolution Reactions
Open accessAbstract
High Resolution Image Download MS PowerPoint Slide In this work, we demonstrate the use of direct ink writing (DIW) technology to create 3D catalytic electrodes for electrochemical applications. Hybrid MoS 2 /graphene aerogels are made by mixing commercially available MoS 2 and graphene oxide powders into a thixotropic, high concentration, viscous ink. A porous 3D structure of 2D graphene sheets and MoS 2 particles was created after post treatment by freeze-drying and reducing graphene oxide through annealing. The composition and morphology of the samples were fully characterized through XPS, BET, and SEM/EDS. The resulting 3D printed MoS 2 /graphene aerogel electrodes had a remarkable electrochemically active surface area (>1700 cm 2 ) and were able to achieve currents over 100 mA in acidic media. Notably, the catalytic activity of the MoS 2 /graphene aerogel electrodes was maintained with minimal loss in surface area compared to the non-3D printed electrodes, suggesting that DIW can be a viable method of producing durable electrodes with a high surface area for water splitting. This demonstrates that 3D printing a MoS 2 /graphene 3D porous network directly using our approach not only improves electrolyte dispersion and facilitates catalyst utilization but also provides multidimensional electron transport channels for improving electronic conductivity.
Overview
CoChat Summary
TL;DR
Direct ink writing was used to 3D print hybrid MoS₂/graphene aerogel electrodes for the hydrogen evolution reaction. The printed lattices achieved high electrochemically active surface area and maintained it under high currents, while monoliths lost substantial ECSA due to trapped H₂ gas.
Key findings
- 3D printed GA/MoS₂ lattices and monoliths had ECSAs of ∼1725 and ∼3100 cm², respectively, compared with ∼800 and ∼1540 cm² for graphene-only control lattices and monoliths.
- GA/MoS₂ electrodes showed improved HER activity over GA controls and achieved over 100 mA total current in 0.5 M sulfuric acid.
- After 1 h chronopotentiometry at 10, 50, and 100 mA, GA/MoS₂ lattices lost <2% of their ECSA, whereas GA/MoS₂ and GA monoliths lost >60% due to H₂ gas trapped in pores.
- The aerogels had a surface area of 89 m²/g, greater than a similarly made graphene aerogel (26 m²/g) but lower than previous GA/MoS₂ aerogels (691 m²/g) because freeze-drying was used instead of critical point drying.
Methods
- Ink was formulated with 4 wt % graphene oxide (300–800 nm platelets), 4 wt % commercial MoS₂, and hydroxypropyl methyl cellulose; cubic lattices and monoliths were printed by DIW, freeze-dried for 48 h, and annealed at 1050 °C for 3 h under 4% H₂/Ar with excess sulfur.
- Composition and morphology were characterized by XPS, BET nitrogen porosimetry, and SEM/EDS.
- Electrochemical testing used cyclic voltammetry for ECSA in a non-Faradaic window at 50–200 mV/s, HER CV in 0.5 M H₂SO₄ with an iridium oxide on carbon anode and Nafion membrane, and chronopotentiometry at 10, 50, and 100 mA for 1 h with gas chromatography for H₂ quantification.
Limitations
- The paper states that freeze-drying produced a lower surface area (89 m²/g) than previous critical point-dried GA/MoS₂ aerogels (691 m²/g).
- The paper reports that monolith structures lost >60% ECSA after chronopotentiometry because H₂ gas became trapped in pores, blocking electrolyte access.
- Evident from the text: no explicit limitations section is provided, and durability testing was limited to 1 h chronopotentiometry at three currents; detailed ink preparation and printing are relegated to Supporting Information.
Model-written summary. Check it against the paper before relying on it.
Integrity signals
Registry
Cites
Statistics
Figures




Verification
Claims the paper makes
2 Valid · 3 Not valid · 5 Not checked · 31 Own results and interpretations
A result the paper states — it cites no source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“The MoS2 particle and GO are converted into a hybrid structure consisting of MoS2 particles homogeneously distributed on the surface of a highly porous GA framework after freeze-drying and thermal annealing.”
§ Three-Dimensional Printed MoS2/Graphene Aerogel Electrodes for Hydrogen Evolution Reactions > Conclusions
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
None of the sources cited for this claim have been checked yet.
In the paper
“The GA/MoS2 electrodes demonstrated a clear improvement in activity compared to the GA samples”
§ Three-Dimensional Printed MoS2/Graphene Aerogel Electrodes for Hydrogen Evolution Reactions > Results and Discussion
boostedstates a causen = 2- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
A result the paper reports from its own data — it cites no other source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“When evaluated by nitrogen porosimetry, these aerogels had a surface area of 89 m2/g.”
§ Three-Dimensional Printed MoS2/Graphene Aerogel Electrodes for Hydrogen Evolution Reactions > Results and Discussion
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
A result the paper reports from its own data — it cites no other source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“This is greater than the surface area of a graphene aerogel made in a similar manner (26 m2/g).”
§ Three-Dimensional Printed MoS2/Graphene Aerogel Electrodes for Hydrogen Evolution Reactions > Results and Discussion
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
A result the paper states — it cites no source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“The GA/MoS2 samples demonstrated lower overpotentials for each of the currents tested compared to the GA samples as expected.”
§ Three-Dimensional Printed MoS2/Graphene Aerogel Electrodes for Hydrogen Evolution Reactions > Results and Discussion
boostedstates an association- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
19 more claims
Create a free account to see all 41 claims and to verify the 1 reference still open.
- It may state two separate claims as one. 13
- Probably not a substantial claim. 6
- Borderline: one of the tests for a substantial claim is unclear. 1
Citations
Cites
Walter, M. G., Warren, E. L., McKone, J. R., Boettcher, S. W., Mi, Q., Santori, E. A., & Lewis, N. S. (2010) · Chemical Reviews · doi:10.1021/cr1002326 · Cited by 9,388
Identification of Active Edge Sites for Electrochemical H 2 Evolution from MoS 2 Nanocatalysts
Jaramillo, T. F., Jørgensen, K. P., Bonde, J., Nielsen, J. H., Horch, S., & Chorkendorff, I. (2007) · Science · doi:10.1126/science.1141483 · Cited by 6,100
Enhanced Hydrogen Evolution Catalysis from Chemically Exfoliated Metallic MoS 2 Nanosheets
Lukowski, M. A., Daniel, A. S., Meng, F., Forticaux, A., Li, L., & Jin, S. (2013) · Journal of the American Chemical Society · doi:10.1021/ja404523s · Cited by 3,341
Self-Assembled Graphene Hydrogel via a One-Step Hydrothermal Process
Xu, Y., Sheng, K., Li, C., & Shi, G. (2010) · ACS Nano · doi:10.1021/nn101187z · Cited by 3,251
Conducting MoS 2 Nanosheets as Catalysts for Hydrogen Evolution Reaction
Voiry, D., Salehi, M., Silva, R., Fujita, T., Chen, M., Asefa, T., Shenoy, V. B., Eda, G., & Chhowalla, M. (2013) · Nano Letters · doi:10.1021/nl403661s · Cited by 2,203
Direct Ink Writing of 3D Functional Materials
Lewis, J. A. (2006) · Advanced Functional Materials · doi:10.1002/adfm.200600434 · Cited by 1,740
Graphene–MoS2 hybrid structures for multifunctional photoresponsive memory devices
Roy, K., Padmanabhan, M., Goswami, S., Sai, T. P., Ramalingam, G., Raghavan, S., & Ghosh, A. (2013) · Nature Nanotechnology · doi:10.1038/nnano.2013.206 · Cited by 1,436
Synthesis of Graphene Aerogel with High Electrical Conductivity
Worsley, M. A., Pauzauskie, P. J., Olson, T. Y., Biener, J., Satcher, J. H., & Baumann, T. F. (2010) · Journal of the American Chemical Society · doi:10.1021/ja1072299 · Cited by 1,216
Self-citationHighly compressible 3D periodic graphene aerogel microlattices
Zhu, C., Han, T. Y.-J., Duoss, E. B., Golobic, A. M., Kuntz, J. D., Spadaccini, C. M., & Worsley, M. A. (2015) · Nature Communications · doi:10.1038/ncomms7962 · Cited by 1,148
Self-citationAll The Catalytic Active Sites of MoS 2 for Hydrogen Evolution
Li, G., Zhang, D., Qiao, Q., Yu, Y., Peterson, D., Zafar, A., Kumar, R., Curtarolo, S., Hunte, F., Shannon, S., et al. (2016) · Journal of the American Chemical Society · doi:10.1021/jacs.6b05940 · Cited by 829
Cited by
Rheology in Product Development: An Insight into 3D Printing of Hydrogels and Aerogels
Barrulas, R. V., & Corvo, M. C. (2023) · Gels · doi:10.3390/gels9120986 · Cited by 132
3D Printed Graphene and Graphene/Polymer Composites for Multifunctional Applications
Wu, Y., An, C., & Guo, Y. (2023) · Materials · doi:10.3390/ma16165681 · Cited by 64
Solution-Processable and Printable Two-Dimensional Transition Metal Dichalcogenide Inks
Dai, Y., He, Q., Huang, Y., Duan, X., & Lin, Z. (2024) · Chemical Reviews · doi:10.1021/acs.chemrev.3c00791 · Cited by 75
Cayanamide Group Functionalized Crystalline Carbon Nitride Aerogel for Efficient CO 2 Photoreduction
Li, Y., Xue, Y., Gao, X., Wang, L., Liu, X., Wang, Z., & Shen, S. (2023) · Advanced Functional Materials · doi:10.1002/adfm.202312634 · Cited by 64
Khoo, V., Ng, S., Haw, C. Y., & Ong, W. (2024) · Small · doi:10.1002/smll.202401278 · Cited by 38
Metadata
- Authors
- Chandrasekaran, S., Feaster, J., Ynzunza, J., Li, F., Wang, X., Nelson, A. J., & Worsley, M. A.
- Affiliations
- Lawrence Livermore National Laboratory (US)
- Corresponding author
- Chandrasekaran, Swetha
- Worsley, Marcus A.
- Venue
- ACS Materials Au
- Publisher
- American Chemical Society (ACS)
- Published
- 2022-05-05
- Volume
- 2
- Issue
- 5
- Pages
- 596-601
- ISSN
- 2694-2461 (ISSN-L)
- PMC
- PMC9928410
- OpenAlex
- W4229023228
- Semantic Scholar
- 14972ab0e112215223889bdbce422276624e1bf9
- Cited by
- 38
- References
- 48
- Citations by year
- 2026: 9 · 2025: 6 · 2024: 9 · 2023: 12 · 2022: 2
- FWCI
- 1.31
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Licence
- Locations
- ACS Materials Au (publishedVersion, cc-by-nc-nd)
- PubMed Central (publishedVersion, cc-by-nc-nd)
- PubMed (publishedVersion)
- OSTI OAI (U.S. Department of Energy Office of Scientific and Technical Information) (submittedVersion)
- Funders
- U.S. Department of Energy (DE-AC52-07NA27344)
- Topics
- Physical Sciences › Energy › Renewable Energy, Sustainability and the Environment › Electrocatalysts for Energy Conversion
- Physical Sciences › Materials Science › Electronic, Optical and Magnetic Materials › Supercapacitor Materials and Fabrication
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Fuel Cells and Related Materials
- Keywords
- direct ink writing, 3D-printed electrodes, hydrogen evolution reaction, electrocatalysis, water splitting, graphene oxide reduction, freeze-drying, electrochemically active surface area, catalyst utilization, electronic conductivity
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
The claim verdicts this report counts are experimental: their accuracy is not yet measured.
A language model drew the claims from the paper on 2026-10-11, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).
A second model labelled each claim on 2026-10-11 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Three-Dimensional Printed MoS2/Graphene Aerogel Electrodes for Hydrogen Evolution Reactions. https://app.cochat.ai/papers/10.1021/acsmaterialsau.2c00014
- The paper
- Chandrasekaran, S., Feaster, J., Ynzunza, J., Li, F., Wang, X., Nelson, A. J., & Worsley, M. A. (2022). Three-Dimensional Printed MoS2/Graphene Aerogel Electrodes for Hydrogen Evolution Reactions. ACS Materials Au. https://doi.org/10.1021/acsmaterialsau.2c00014
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.