Modulation of Defects and Interfaces through Alkylammonium Interlayer for Efficient Inverted Perovskite Solar Cells
Open accessThe DOI matches its Crossref record; 40 of the 40 references it cites were found in a registry or an index.
Abstract
Summary Perovskite solar cells (PVSCs) with p-i-n configuration bear great potential for flexible photovoltaics and all perovskite or Si-perovskite multijunction solar cells because of their low-temperature processability. Nevertheless, the state-of-the-art efficiencies of p-i-n structured PVSCs suffer from non-ideal interfacial recombination and charge-extraction losses. To address these challenges, we employed a large alkylammonium interlayer (LAI) to reduce the energy loss occurred between transport layers and perovskite. The use of LAIs, in contrast with the reported bottom or top surface passivation strategies, can simultaneously suppress the non-radiative energy losses at both top and bottom interfaces of perovskite. As a result, the reduced surface recombination velocity (SRV) and trap state density (Nt) enable a substantially improved photovoltage from 1.12 to 1.21 V for the PVSCs with an optical band gap (Eg) of 1.59 eV, leading to a champion power conversion efficiency (PCE) over 22%, which is among the highest efficiencies reported for inverted PVSCs.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Detailed Balance Limit of Efficiency of p-n Junction Solar Cells
Shockley, W., & Queisser, H. J. (1961) · Journal of Applied Physics · doi:10.1063/1.1736034 · Cited by 13,258
Saliba, M., Matsui, T., Seo, J.-Y., Domanski, K., Correa-Baena, J.-P., Nazeeruddin, M. K., Zakeeruddin, S. M., Tress, W., Abate, A., Hagfeldt, A., et al. (2016) · Energy & Environmental Science · doi:10.1039/c5ee03874j · Cited by 5,440
Surface passivation of perovskite film for efficient solar cells
Jiang, Q., Zhao, Y., Zhang, X., Yang, X., Chen, Y., Chu, Z., Ye, Q., Li, X., Yin, Z., & You, J. (2019) · Nature Photonics · doi:10.1038/s41566-019-0398-2 · Cited by 4,736
Incorporation of rubidium cations into perovskite solar cells improves photovoltaic performance
Saliba, M., Matsui, T., Domanski, K., Seo, J.-Y., Ummadisingu, A., Zakeeruddin, S. M., Correa-Baena, J.-P., Tress, W. R., Abate, A., Hagfeldt, A., et al. (2016) · Science · doi:10.1126/science.aah5557 · Cited by 3,706
Impact of microstructure on local carrier lifetime in perovskite solar cells
de Quilettes, D. W., Vorpahl, S. M., Stranks, S. D., Nagaoka, H., Eperon, G. E., Ziffer, M. E., Snaith, H. J., & Ginger, D. S. (2015) · Science · doi:10.1126/science.aaa5333 · Cited by 2,198
Zheng, X., Chen, B., Dai, J., Fang, Y., Bai, Y., Lin, Y., Wei, H., Zeng, X. C., & Huang, J. (2017) · Nature Energy · doi:10.1038/nenergy.2017.102 · Cited by 2,154
Kim, M., Kim, G.-H., Lee, T. K., Choi, I. W., Choi, H. W., Jo, Y., Yoon, Y. J., Kim, J. W., Lee, J., Huh, D., et al. (2019) · Joule · doi:10.1016/j.joule.2019.06.014 · Cited by 1,753
Bi, C., Wang, Q., Shao, Y., Yuan, Y., Xiao, Z., & Huang, J. (2015) · Nature Communications · doi:10.1038/ncomms8747 · Cited by 1,660
Brodsky, M. H., Cardona, M., & Cuomo, J. J. (1977) · Physical Review B · doi:10.1103/physrevb.16.3556 · Cited by 1,644
Planar perovskite solar cells with long-term stability using ionic liquid additives
Bai, S., Da, P., Li, C., Wang, Z., Yuan, Z., Fu, F., Kawecki, M., Liu, X., Sakai, N., Wang, J. T.-W., et al. (2019) · Nature · doi:10.1038/s41586-019-1357-2 · Cited by 1,458
Charge-Carrier Mobilities in Metal Halide Perovskites: Fundamental Mechanisms and Limits
Herz, L. M. (2017) · ACS Energy Letters · doi:10.1021/acsenergylett.7b00276 · Cited by 1,402
Fast charge separation in a non-fullerene organic solar cell with a small driving force
Liu, J., Chen, S., Qian, D., Gautam, B., Yang, G., Zhao, J., Bergqvist, J., Zhang, F., Ma, W., Ade, H., et al. (2016) · Nature Energy · doi:10.1038/nenergy.2016.89 · Cited by 1,392
Rau, U. (2007) · Physical Review B · doi:10.1103/physrevb.76.085303 · Cited by 1,231
Carrier lifetimes of >1 μs in Sn-Pb perovskites enable efficient all-perovskite tandem solar cells
Tong, J., Song, Z., Kim, D. H., Chen, X., Chen, C., Palmstrom, A. F., Ndione, P. F., Reese, M. O., Dunfield, S. P., Reid, O. G., et al. (2019) · Science · doi:10.1126/science.aav7911 · Cited by 1,057
Self-citationStabilizing halide perovskite surfaces for solar cell operation with wide-bandgap lead oxysalts
Yang, S., Chen, S., Mosconi, E., Fang, Y., Xiao, X., Wang, C., Zhou, Y., Yu, Z., Zhao, J., Gao, Y., et al. (2019) · Science · doi:10.1126/science.aax3294 · Cited by 1,029
Stolterfoht, M., Wolff, C. M., Márquez, J. A., Zhang, S., Hages, C. J., Rothhardt, D., Albrecht, S., Burn, P. L., Meredith, P., Unold, T., et al. (2018) · Nature Energy · doi:10.1038/s41560-018-0219-8 · Cited by 1,007
Vandewal, K., Tvingstedt, K., Gadisa, A., Inganäs, O., & Manca, J. V. (2010) · Physical Review B · doi:10.1103/physrevb.81.125204 · Cited by 936
Tress, W., Yavari, M., Domanski, K., Yadav, P., Niesen, B., Correa Baena, J. P., Hagfeldt, A., & Graetzel, M. (2018) · Energy & Environmental Science · doi:10.1039/c7ee02415k · Cited by 843
Yang, S., Dai, J., Yu, Z., Shao, Y., Zhou, Y., Xiao, X., Zeng, X. C., & Huang, J. (2019) · Journal of the American Chemical Society · doi:10.1021/jacs.8b13091 · Cited by 744
Photon recycling in lead iodide perovskite solar cells
Pazos-Outón, L. M., Szumilo, M., Lamboll, R., Richter, J. M., Crespo-Quesada, M., Abdi-Jalebi, M., Beeson, H. J., Vrućinić, M., Alsari, M., Snaith, H. J., et al. (2016) · Science · doi:10.1126/science.aaf1168 · Cited by 715
An interface stabilized perovskite solar cell with high stabilized efficiency and low voltage loss
Yoo, J. J., Wieghold, S., Sponseller, M. C., Chua, M. R., Bertram, S. N., Hartono, N. T. P., Tresback, J. S., Hansen, E. C., Correa-Baena, J.-P., Bulović, V., et al. (2019) · Energy & Environmental Science · doi:10.1039/c9ee00751b · Cited by 704
Titanium-carbide MXenes for work function and interface engineering in perovskite solar cells
Agresti, A., Pazniak, A., Pescetelli, S., Di Vito, A., Rossi, D., Pecchia, A., Auf der Maur, M., Liedl, A., Larciprete, R., Kuznetsov, D. V., et al. (2019) · Nature Materials · doi:10.1038/s41563-019-0478-1 · Cited by 684
Light-Induced Anion Phase Segregation in Mixed Halide Perovskites
Brennan, M. C., Draguta, S., Kamat, P. V., & Kuno, M. (2018) · ACS Energy Letters · doi:10.1021/acsenergylett.7b01151 · Cited by 643
Rationalizing the light-induced phase separation of mixed halide organic–inorganic perovskites
Draguta, S., Sharia, O., Yoon, S. J., Brennan, M. C., Morozov, Y. V., Manser, J. S., Kamat, P. V., Schneider, W. F., & Kuno, M. (2017) · Nature Communications · doi:10.1038/s41467-017-00284-2 · Cited by 558
Caprioglio, P., Stolterfoht, M., Wolff, C. M., Unold, T., Rech, B., Albrecht, S., & Neher, D. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201901631 · Cited by 557
Cui, Y., Wang, Y., Bergqvist, J., Yao, H., Xu, Y., Gao, B., Yang, C., Zhang, S., Inganäs, O., Gao, F., et al. (2019) · Nature Energy · doi:10.1038/s41560-019-0448-5 · Cited by 553
Reducing Detrimental Defects for High‐Performance Metal Halide Perovskite Solar Cells
Ono, L. K., Liu, S. (., & Qi, Y. (2020) · Angewandte Chemie International Edition · doi:10.1002/anie.201905521 · Cited by 541
Wu, W.-Q., Yang, Z., Rudd, P. N., Shao, Y., Dai, X., Wei, H., Zhao, J., Fang, Y., Wang, Q., Liu, Y., et al. (2019) · Science Advances · doi:10.1126/sciadv.aav8925 · Cited by 522
Soe, C. M. M., Stoumpos, C. C., Kepenekian, M., Traoré, B., Tsai, H., Nie, W., Wang, B., Katan, C., Seshadri, R., Mohite, A. D., et al. (2017) · Journal of the American Chemical Society · doi:10.1021/jacs.7b09096 · Cited by 521
Enabling Flexible All-Perovskite Tandem Solar Cells
Palmstrom, A. F., Eperon, G. E., Leijtens, T., Prasanna, R., Habisreutinger, S. N., Nemeth, W., Gaulding, E. A., Dunfield, S. P., Reese, M., Nanayakkara, S., et al. (2019) · Joule · doi:10.1016/j.joule.2019.05.009 · Cited by 493
Grain Engineering for Perovskite/Silicon Monolithic Tandem Solar Cells with Efficiency of 25.4%
Chen, B., Yu, Z. J., Liu, K., Zheng, X., Liu, Y., Shi, J., Spronk, D., Rudd, P. N., Holman, Z. C., & Huang, J. (2018) · Joule · doi:10.1016/j.joule.2018.10.003 · Cited by 439
Sproul, A. B. (1994) · Journal of Applied Physics · doi:10.1063/1.357521 · Cited by 433
Bimolecular Additives Improve Wide-Band-Gap Perovskites for Efficient Tandem Solar Cells with CIGS
Kim, D. H., Muzzillo, C. P., Tong, J., Palmstrom, A. F., Larson, B. W., Choi, C., Harvey, S. P., Glynn, S., Whitaker, J. B., Zhang, F., et al. (2019) · Joule · doi:10.1016/j.joule.2019.04.012 · Cited by 342
Self-citationHeterogeneity at multiple length scales in halide perovskite semiconductors
Tennyson, E. M., Doherty, T. A. S., & Stranks, S. D. (2019) · Nature Reviews Materials · doi:10.1038/s41578-019-0125-0 · Cited by 274
Edge stabilization in reduced-dimensional perovskites
Na Quan, L., Ma, D., Zhao, Y., Voznyy, O., Yuan, H., Bladt, E., Pan, J., García de Arquer, F. P., Sabatini, R., Piontkowski, Z., et al. (2020) · Nature Communications · doi:10.1038/s41467-019-13944-2 · Cited by 224
Wang, J., Fu, W., Jariwala, S., Sinha, I., Jen, A. K.-Y., & Ginger, D. S. (2019) · ACS Energy Letters · doi:10.1021/acsenergylett.8b02058 · Cited by 215
Self-citationTsai, H., Asadpour, R., Blancon, J., Stoumpos, C. C., Even, J., Ajayan, P. M., Kanatzidis, M. G., Alam, M. A., Mohite, A. D., & Nie, W. (2018) · Nature Communications · doi:10.1038/s41467-018-04430-2 · Cited by 207
Han, Q., Bai, Y., Liu, J., Du, K.-Z., Li, T., Ji, D., Zhou, Y., Cao, C., Shin, D., Ding, J., et al. (2017) · Energy & Environmental Science · doi:10.1039/c7ee02272g · Cited by 190
Zhang, J., Wu, S., Liu, T., Zhu, Z., & Jen, A. K. ‐. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201808833 · Cited by 159
Self-citationCharge Carrier Collection and Contact Selectivity in Solar Cells
Rau, U., & Kirchartz, T. (2019) · Advanced Materials Interfaces · doi:10.1002/admi.201900252 · Cited by 68
Cited by
Minimizing buried interfacial defects for efficient inverted perovskite solar cells
Zhang, S., Ye, F., Wang, X., Chen, R., Zhang, H., Zhan, L., Jiang, X., Li, Y., Ji, X., Liu, S., et al. (2023) · Science · doi:10.1126/science.adg3755 · Cited by 1,159
Organometallic-functionalized interfaces for highly efficient inverted perovskite solar cells
Li, Z., Li, B., Wu, X., Sheppard, S. A., Zhang, S., Gao, D., Long, N. J., & Zhu, Z. (2022) · Science · doi:10.1126/science.abm8566 · Cited by 1,043
Self-citationReducing nonradiative recombination in perovskite solar cells with a porous insulator contact
Peng, W., Mao, K., Cai, F., Meng, H., Zhu, Z., Li, T., Yuan, S., Xu, Z., Feng, X., Xu, J., et al. (2023) · Science · doi:10.1126/science.ade3126 · Cited by 666
Self-citationLi, F., Deng, X., Qi, F., Li, Z., Liu, D., Shen, D., Qin, M., Wu, S., Lin, F., Jang, S.-H., et al. (2020) · Journal of the American Chemical Society · doi:10.1021/jacs.0c09845 · Cited by 655
Self-citationHighly efficient p-i-n perovskite solar cells that endure temperature variations
Li, G., Su, Z., Canil, L., Hughes, D., Aldamasy, M. H., Dagar, J., Trofimov, S., Wang, L., Zuo, W., Jerónimo-Rendon, J. J., et al. (2023) · Science · doi:10.1126/science.add7331 · Cited by 572
Self-citation
Metadata
- Authors
- Wu, S., Zhang, J., Li, Z., Liu, D., Qin, M., Cheung, S. H., Lu, X., Lei, D., So, S. K., Zhu, Z., & Jen, A. K.-Y.
- Venue
- Joule
- Publisher
- Elsevier BV
- Published
- 2020-06
- Volume
- 4
- Issue
- 6
- Pages
- 1248-1262
- ISSN
- 2542-4351 (ISSN-L)
- OpenAlex
- W3019744350
- Cited by
- 388
- References
- 40
- FWCI
- 21.18
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.