The DOI matches its Crossref record; 42 of the 42 references it cites were found in a registry or an index.
Lithium-ion battery thermal-electrochemical model-based state estimation using orthogonal collocation and a modified extended Kalman filter
Open accessAbstract
This paper investigates the state estimation of a high-fidelity spatially resolved thermal-electrochemical lithium-ion battery model commonly referred to as the pseudo two-dimensional model. The partial-differential algebraic equations (PDAEs) constituting the model are spatially discretised using Chebyshev orthogonal collocation enabling fast and accurate simulations up to high C-rates. This implementation of the pseudo-2D model is then used in combination with an extended Kalman filter algorithm for differential-algebraic equations to estimate the states of the model. The state estimation algorithm is able to rapidly recover the model states from current, voltage and temperature measurements. Results show that the error on the state estimate falls below 1% in less than 200 s despite a 30% error on battery initial state-of-charge and additive measurement noise with 10 mV and 0.5 K standard deviations.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
GELB, A. (1974) · CERN Document Server (European Organization for Nuclear Research) · Cited by 6,405
Trefethen, L. N. (2000) · Society for Industrial and Applied Mathematics eBooks · doi:10.1137/1.9780898719598 · Cited by 4,458
Modeling of Galvanostatic Charge and Discharge of the Lithium/Polymer/Insertion Cell
Doyle, M., Fuller, T. F., & Newman, J. (1993) · Journal of The Electrochemical Society · doi:10.1149/1.2221597 · Cited by 4,328 · cited 3×
“Physics-based models have been widely used for battery design [5, 6, 7, 8] but are usually too computationally intensive for the limited resources of an embedded BMS.”
BackgroundMethodA comparative study of equivalent circuit models for Li-ion batteries
Hu, X., Li, S., & Peng, H. (2012) · Journal of Power Sources · doi:10.1016/j.jpowsour.2011.10.013 · Cited by 2,179 · cited 1×
“Current BMSs typically employ low-order empirical models, such as equivalent-circuit models (ECMs), which are parametrised using time- or frequency-domain experimental data [2, 3, 4] for battery state estimation and control.”
MethodSimulation and Optimization of the Dual Lithium Ion Insertion Cell
Fuller, T. F., Doyle, M., & Newman, J. (1994) · Journal of The Electrochemical Society · doi:10.1149/1.2054684 · Cited by 2,057
Extended Kalman filtering for battery management systems of LiPB-based HEV battery packs
Plett, G. L. (2004) · Journal of Power Sources · doi:10.1016/j.jpowsour.2004.02.032 · Cited by 1,923
Porous‐electrode theory with battery applications
Newman, J., & Tiedemann, W. (1975) · AIChE Journal · doi:10.1002/aic.690210103 · Cited by 1,255
Transport Properties of LiPF[sub 6]-Based Li-Ion Battery Electrolytes
Valo̸en, L. O., & Reimers, J. N. (2005) · Journal of The Electrochemical Society · doi:10.1149/1.1872737 · Cited by 935
A MATLAB differentiation matrix suite
Weideman, J. A. C., & Reddy, S. C. (2000) · ACM Transactions on Mathematical Software · doi:10.1145/365723.365727 · Cited by 896
Numerical Analysis of Spectral Methods
Gottlieb, D. J., & Orszag, S. A. (1977) · Society for Industrial and Applied Mathematics eBooks · doi:10.1137/1.9781611970425 · Cited by 815
Development of First Principles Capacity Fade Model for Li-Ion Cells
Ramadass, P., Haran, B., Gomadam, P. M., White, R., & Popov, B. N. (2004) · Journal of The Electrochemical Society · doi:10.1149/1.1634273 · Cited by 794
Power and thermal characterization of a lithium-ion battery pack for hybrid-electric vehicles
Smith, K., & Wang, C.-Y. (2006) · Journal of Power Sources · doi:10.1016/j.jpowsour.2006.01.038 · Cited by 763
The ARTEMIS European driving cycles for measuring car pollutant emissions
André, M. (2004) · Science of The Total Environment · doi:10.1016/j.scitotenv.2004.04.070 · Cited by 678
Algorithms for Advanced Battery-Management Systems
(2010) · IEEE Control Systems · doi:10.1109/mcs.2010.936293 · Cited by 594
Single-Particle Model for a Lithium-Ion Cell: Thermal Behavior
Guo, M., Sikha, G., & White, R. E. (2011) · Journal of The Electrochemical Society · doi:10.1149/1.3521314 · Cited by 567
Solving Index-1 DAEs in MATLAB and Simulink
Shampine, L. F., Reichelt, M. W., & Kierzenka, J. A. (1999) · SIAM Review · doi:10.1137/s003614459933425x · Cited by 446
Control oriented 1D electrochemical model of lithium ion battery
Smith, K. A., Rahn, C. D., & Wang, C.-Y. (2007) · Energy Conversion and Management · doi:10.1016/j.enconman.2007.03.015 · Cited by 445
Di Domenico, D., Stefanopoulou, A., & Fiengo, G. (2010) · Journal of Dynamic Systems, Measurement, and Control · doi:10.1115/1.4002475 · Cited by 401
Thermal Model for a Li-Ion Cell
Kumaresan, K., Sikha, G., & White, R. E. (2008) · Journal of The Electrochemical Society · doi:10.1149/1.2817888 · Cited by 382
Cai, L., & White, R. E. (2011) · Journal of Power Sources · doi:10.1016/j.jpowsour.2011.03.017 · Cited by 377
Smith, K. A., Rahn, C. D., & Wang, C.-Y. (2010) · IEEE Transactions on Control Systems Technology · doi:10.1109/tcst.2009.2027023 · Cited by 346
Forman, J. C., Moura, S. J., Stein, J. L., & Fathy, H. K. (2012) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.03.009 · Cited by 299
Coupled thermal–electrochemical modelling of uneven heat generation in lithium-ion battery packs
Wu, B., Yufit, V., Marinescu, M., Offer, G. J., Martinez-Botas, R. F., & Brandon, N. P. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.05.164 · Cited by 286
Online estimation of the state of charge of a lithium ion cell
Santhanagopalan, S., & White, R. E. (2006) · Journal of Power Sources · doi:10.1016/j.jpowsour.2006.04.146 · Cited by 279
Moura, S. J., Chaturvedi, N. A., & Krstić, M. (2014) · Journal of Dynamic Systems, Measurement, and Control · doi:10.1115/1.4024801 · Cited by 262
Validity of the Bruggeman relation for porous electrodes
Chung, D.-W., Ebner, M., Ely, D. R., Wood, V., & Edwin García, R. (2013) · Modelling and Simulation in Materials Science and Engineering · doi:10.1088/0965-0393/21/7/074009 · Cited by 242
Simplification and order reduction of lithium-ion battery model based on porous-electrode theory
Dao, T.-S., Vyasarayani, C. P., & McPhee, J. (2012) · Journal of Power Sources · doi:10.1016/j.jpowsour.2011.09.034 · Cited by 225
Moura, S. J., Stein, J. L., & Fathy, H. K. (2013) · IEEE Transactions on Control Systems Technology · doi:10.1109/tcst.2012.2189773 · Cited by 211
Doyle, M., & Fuentes, Y. (2003) · Journal of The Electrochemical Society · doi:10.1149/1.1569478 · Cited by 201
Northrop, P. W. C., Ramadesigan, V., De, S., & Subramanian, V. R. (2011) · Journal of The Electrochemical Society · doi:10.1149/2.058112jes · Cited by 197
One-dimensional physics-based reduced-order model of lithium-ion dynamics
Lee, J. L., Chemistruck, A., & Plett, G. L. (2012) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.07.075 · Cited by 133
Model Order Reduction of 1D Diffusion Systems Via Residue Grouping
Smith, K. A., Rahn, C. D., & Wang, C. (2008) · Journal of Dynamic Systems Measurement and Control · doi:10.1115/1.2807068 · Cited by 132
Stetzel, K. D., Aldrich, L. L., Trimboli, M. S., & Plett, G. L. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.11.135 · Cited by 106
Model-based electrochemical estimation of lithium-ion batteries
Smith, K. A., Rahn, C. D., & Wang, C. (2008) · The proceedings of the IEEE Conference on Control Applications/The proceedings of the ... IEEE Conference on Control Applications · doi:10.1109/cca.2008.4629589 · Cited by 85
Suthar, B., Northrop, P. W. C., Braatz, R. D., & Subramanian, V. R. (2014) · Journal of The Electrochemical Society · doi:10.1149/2.0211411jes · Cited by 80
Lee, J. L., Chemistruck, A., & Plett, G. L. (2012) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.01.134 · Cited by 61
Optimal control and state estimation of lithium-ion batteries using reformulated models
Suthar, B., Ramadesigan, V., Northrop, P., Gopaluni, B., Santhanagopalan, S., Braatz, R., & Subramanian, V. (2013) · American Control Conference · doi:10.1109/acc.2013.6580673 · Cited by 57
Model identification and parameter estimation for LiFePO4 batteries
Birkl, C. R., & Howey, D. A. (2013) · IET Hybrid and Electric Vehicles Conference (HEVC) · doi:10.1049/cp.2013.1889 · Cited by 56
Self-citationExtended operating range for reduced-order model of lithium-ion cells
Lee, J. L., Aldrich, L. L., Stetzel, K. D., & Plett, G. L. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.12.134 · Cited by 49
Lithium ion cell modeling using orthogonal collocation on finite elements
Cai, L., & White, R. E. (2012) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.06.043 · Cited by 49
Rechargeable Battery Energy Storage System Design
Howey, D. A., & Alavi, S. M. M. (2015) · Wiley eBooks · doi:10.1002/9781118991978.hces212 · Cited by 19
Self-citationState of Charge Estimation in Li-ion Batteries Using an Isothermal Pseudo Two-Dimensional Model
Gopaluni, R. B., & Braatz, R. D. (2013) · IFAC Proceedings Volumes · doi:10.3182/20131218-3-in-2045.00163 · Cited by 15
Cited by
Wang, Y., Tian, J., Sun, Z., Wang, L., Xu, R., Li, M., & Chen, Z. (2020) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2020.110015 · Cited by 1,377
Hu, X., Xu, L., Lin, X., & Pecht, M. (2020) · Joule · doi:10.1016/j.joule.2019.11.018 · Cited by 1,320
A brief review on key technologies in the battery management system of electric vehicles
Liu, K., Li, K., Peng, Q., & Zhang, C. (2019) · Frontiers of Mechanical Engineering · doi:10.1007/s11465-018-0516-8 · Cited by 635
Review of simplified Pseudo-two-Dimensional models of lithium-ion batteries
Jokar, A., Rajabloo, B., Désilets, M., & Lacroix, M. (2016) · Journal of Power Sources · doi:10.1016/j.jpowsour.2016.07.036 · Cited by 592
Zheng, F., Xing, Y., Jiang, J., Sun, B., Kim, J., & Pecht, M. (2016) · Applied Energy · doi:10.1016/j.apenergy.2016.09.010 · Cited by 574
Metadata
- Authors
- Bizeray, A. M., Zhao, S., Duncan, S. R., & Howey, D. A.
- Venue
- Journal of Power Sources
- Publisher
- Elsevier BV
- Published
- 2015-11
- Volume
- 296
- Pages
- 400-412
- ISSN
- 0378-7753 (ISSN-L)
- OpenAlex
- W828050630
- Cited by
- 269
- References
- 42
- FWCI
- 18.44
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.