Calculation of the state of safety (SOS) for lithium ion batteries
Open accessThe DOI matches its Crossref record; 12 of the 12 references it cites were found in a registry or an index.
Abstract
As lithium ion batteries are adopted in electric vehicles and stationary storage applications, the higher number of cells and greater energy densities increases the risks of possible catastrophic events. This paper shows a definition and method to calculate the state of safety of an energy storage system based on the concept that safety is inversely proportional to the concept of abuse. As the latter increases, the former decreases to zero. Previous descriptions in the literature are qualitative in nature but don’t provide a numerical quantification of the safety of a storage system. In the case of battery testing standards, they only define pass or fail criteria. The proposed state uses the same range as other commonly used state quantities like the SOC, SOH, and SOF, taking values between 0, completely unsafe, and 1, completely safe. The developed function combines the effects of an arbitrary number of subfunctions, each of which describes a particular case of abuse, in one or more variables such as voltage, temperature, or mechanical deformation, which can be detected by sensors or estimated by other techniques. The state of safety definition can be made more general by adding new subfunctions, or by refining the existing ones.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A review on the key issues for lithium-ion battery management in electric vehicles
Lu, L., Han, X., Li, J., Hua, J., & Ouyang, M. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.10.060 · Cited by 4,837 · cited 8×
“If it goes below a lower value (under-temperature), the reaction rate is greatly decreased and attempting to charge or discharge may result in metallic lithium depositing on the negative electrode, leading to irreversible loss of capacity and risk of internal short circuits [10,29 e 31].”
BackgroundInfluentialAgeing mechanisms in lithium-ion batteries
Vetter, J., Novák, P., Wagner, M. R., Veit, C., Möller, K.-C., Besenhard, J. O., Winter, M., Wohlfahrt-Mehrens, M., Vogler, C., & Hammouche, A. (2005) · Journal of Power Sources · doi:10.1016/j.jpowsour.2005.01.006 · Cited by 3,987
A critical review of thermal issues in lithium-ion batteries
Bandhauer, T. M., Garimella, S., & Fuller, T. F. (2011) · Journal of The Electrochemical Society · doi:10.1149/1.3515880 · Cited by 2,192 · cited 2×
“Nevertheless, this list is notexhaustive and other conditions may be observed depending on the type of storage system [10,23,24].”
BackgroundCapacity Fade Mechanisms and Side Reactions in Lithium‐Ion Batteries
Arora, P., White, R. E., & Doyle, M. (1998) · Journal of The Electrochemical Society · doi:10.1149/1.1838857 · Cited by 1,408 · cited 2×
“Overvoltage (overcharge) results in decomposition of the positive electrode and the electrolyte, which results in heat generation and gas [10,35 e 38].”
BackgroundHe, W., Williard, N., Osterman, M., & Pecht, M. (2011) · Journal of Power Sources · doi:10.1016/j.jpowsour.2011.08.040 · Cited by 1,105 · cited 1×
“While the SOC can be estimated by simple methods, including Coulomb counting, the effects of ageing and capacity fade should be looked more into detail by using suitable ageing estimation techniques [45].”
MethodWaag, W., Käbitz, S., & Sauer, D. U. (2013) · Applied Energy · doi:10.1016/j.apenergy.2012.09.030 · Cited by 987 · cited 1×
“Moreover attention should be given to the conditions in which the measurements are done as the impedance results vary and are affected by the temperature, SOC, and current rate used [55].”
BackgroundPetzl, M., & Danzer, M. A. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.12.060 · Cited by 511 · cited 1×
“Studies have shown that plating is reversible in some amount and could be quanti fi ed, both by destructive tests (opening of the cell) as well as nondestructive tests (measuring a speci fi c voltage or impedance, or by neutron diffraction) [30,49].”
BackgroundNeubauer, J., & Pesaran, A. (2011) · Journal of Power Sources · doi:10.1016/j.jpowsour.2011.06.053 · Cited by 419 · cited 1×
“The SOH is also an important value that should be taken into consideration when discussing the possibility of second life of storage devices [46].”
BackgroundOvercharge reaction of lithium-ion batteries
Ohsaki, T., Kishi, T., Kuboki, T., Takami, N., Shimura, N., Sato, Y., Sekino, M., & Satoh, A. (2005) · Journal of Power Sources · doi:10.1016/j.jpowsour.2005.03.105 · Cited by 382
Analysis of internal short-circuit in a lithium ion cell
Santhanagopalan, S., Ramadass, P., & Zhang, J. (. (2009) · Journal of Power Sources · doi:10.1016/j.jpowsour.2009.05.002 · Cited by 351
Cited by
Thermal runaway mechanism of lithium ion battery for electric vehicles: A review
Feng, X., Ouyang, M., Liu, X., Lu, L., Xia, Y., & He, X. (2018) · Energy Storage Materials · doi:10.1016/j.ensm.2017.05.013 · Cited by 4,182
Environmental impacts, pollution sources and pathways of spent lithium-ion batteries
Mrozik, W., Rajaeifar, M. A., Heidrich, O., & Christensen, P. (2021) · Energy & Environmental Science · doi:10.1039/d1ee00691f · Cited by 1,028
State estimation for advanced battery management: Key challenges and future trends
Hu, X., Feng, F., Liu, K., Zhang, L., Xie, J., & Liu, B. (2019) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2019.109334 · Cited by 857
Gaussian process regression for forecasting battery state of health
Richardson, R. R., Osborne, M. A., & Howey, D. A. (2017) · Journal of Power Sources · doi:10.1016/j.jpowsour.2017.05.004 · Cited by 732
“This is an open access article performance or to operate in an unsafe regime [1].”
BackgroundDai, H., Jiang, B., Hu, X., Lin, X., Wei, X., & Pecht, M. (2021) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2020.110480 · Cited by 405
An Overview on Thermal Safety Issues of Lithium-ion Batteries for Electric Vehicle Application
Zhang, J., Zhang, L., Sun, F., & Wang, Z. (2018) · IEEE Access · doi:10.1109/access.2018.2824838 · Cited by 344
Toward Sustainable Reuse of Retired Lithium-ion Batteries from Electric Vehicles
Hua, Y., Liu, X., Zhou, S., Huang, Y., Ling, H., & Yang, S. (2021) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2020.105249 · Cited by 332
Finegan, D. P., Darcy, E., Keyser, M., Tjaden, B., Heenan, T. M. M., Jervis, R., Bailey, J. J., Malik, R., Vo, N. T., Magdysyuk, O. V., et al. (2017) · Energy & Environmental Science · doi:10.1039/c7ee00385d · Cited by 326
Jiang, X., Chen, Y., Meng, X., Cao, W., Liu, C., Huang, Q., Naik, N., Murugadoss, V., Huang, M., & Guo, Z. (2022) · Carbon · doi:10.1016/j.carbon.2022.02.011 · Cited by 308
Hasib, S. A., Islam, S., Chakrabortty, R. K., Ryan, M. J., Saha, D. K., Ahamed, M. H., Moyeen, S. I., Das, S. K., Ali, M. F., Islam, M. R., et al. (2021) · IEEE Access · doi:10.1109/access.2021.3089032 · Cited by 272
Review—Dynamic Models of Li-Ion Batteries for Diagnosis and Operation: A Review and Perspective
Krewer, U., Röder, F., Harinath, E., Braatz, R. D., Bedürftig, B., & Findeisen, R. (2018) · Journal of The Electrochemical Society · doi:10.1149/2.1061814jes · Cited by 242
Battery Safety: Machine Learning-Based Prognostics
Zhao, J., Feng, X., Pang, Q., Fowler, M., Lian, Y., Ouyang, M., & Burke, A. F. (2024) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2023.101142 · Cited by 216
Tagade, P., Hariharan, K. S., Ramachandran, S., Khandelwal, A., Naha, A., Kolake, S. M., & Han, S. H. (2020) · Journal of Power Sources · doi:10.1016/j.jpowsour.2019.227281 · Cited by 204
State of mission: Battery management with neural networks and electrochemical AI
Ozkan, C. S., & Ozkan, M. (2025) · iScience · doi:10.1016/j.isci.2025.113593 · Cited by 7
“17 The precision of these estimations directly dictates the BMS’s ability to optimize battery performance and ensure its safe operation throughout its service life.”
Metadata
- Authors
- Cabrera-Castillo, E., Niedermeier, F., & Jossen, A.
- Venue
- Journal of Power Sources
- Publisher
- Elsevier BV
- Published
- 2016-08
- Volume
- 324
- Pages
- 509-520
- ISSN
- 0378-7753 (ISSN-L)
- OpenAlex
- W2413802951
- Cited by
- 152
- References
- 12
- FWCI
- 8.26
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.