The DOI matches its Crossref record; 153 of the 153 references it cites were found in a registry or an index.
A comprehensive review on a passive (phase change materials) and an active (thermoelectric cooler) battery thermal management system and their limitations
Abstract
A battery thermal management system (BTMS) has become an essential part in battery-driven electric vehicles (EVs) in order to remove the generated heat from the battery which leads to enhanced performance. BTMSs have been implemented in EVs by adopting different technologies that include natural air cooling systems, forced air cooling systems, liquid cooling systems, and using heat pipes and fins. However, phase change material (PCM) embedded systems have gained a lot of attention due to their availability, low cost, and high sensible and latent heat in the field of BTMS. In the last two decades, thermoelectric coolers (TECs) have also been applied to BTMSs to make an active or semi-passive system with another cooling system. In this paper, a state of the science comprehensive literature review is presented on PCM (a passive system) and TEC (an active system) based BTMSs. A synthesis of the literature is presented in a tabular format to give a clear indication on the relative performances of the BTMSs. Moreover, limitations of the batteries, PCMs, and TECs are also discussed to identify the future research possibilities in the area of BTMS for EVs.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Review on thermal energy storage with phase change materials and applications
Sharma, A., Tyagi, V. V., Chen, C. R., & Buddhi, D. (2009) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2007.10.005 · Cited by 5,936
Zalba, B., Marı́n, J. M., Cabeza, L. F., & Mehling, H. (2003) · Applied Thermal Engineering · doi:10.1016/s1359-4311(02)00192-8 · Cited by 4,738
Modeling of Galvanostatic Charge and Discharge of the Lithium/Polymer/Insertion Cell
Doyle, M., Fuller, T. F., & Newman, J. (1993) · Journal of The Electrochemical Society · doi:10.1149/1.2221597 · Cited by 4,328
A General Energy Balance for Battery Systems
Bernardi, D., Pawlikowski, E., & Newman, J. (1985) · Journal of The Electrochemical Society · doi:10.1149/1.2113792 · Cited by 2,548
A critical review of thermal issues in lithium-ion batteries
Bandhauer, T. M., Garimella, S., & Fuller, T. F. (2011) · Journal of The Electrochemical Society · doi:10.1149/1.3515880 · Cited by 2,192
Phase change materials for thermal energy storage
Pielichowska, K., & Pielichowski, K. (2014) · Progress in Materials Science · doi:10.1016/j.pmatsci.2014.03.005 · Cited by 2,106
Review on thermal energy storage with phase change materials (PCMs) in building applications
Zhou, D., Zhao, C. Y., & Tian, Y. (2012) · Applied Energy · doi:10.1016/j.apenergy.2011.08.025 · Cited by 1,896
Materials used as PCM in thermal energy storage in buildings: A review
Cabeza, L. F., Castell, A., Barreneche, C., de Gracia, A., & Fernández, A. I. (2011) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2010.11.018 · Cited by 1,889
A review of energy sources and energy management system in electric vehicles
Tie, S. F., & Tan, C. W. (2013) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2012.11.077 · Cited by 1,463
Thermoelectrics: a review of present and potential applications
Riffat, S., & Ma, X. (2003) · Applied Thermal Engineering · doi:10.1016/s1359-4311(03)00012-7 · Cited by 1,414
Porous‐electrode theory with battery applications
Newman, J., & Tiedemann, W. (1975) · AIChE Journal · doi:10.1002/aic.690210103 · Cited by 1,255
A review of power battery thermal energy management
Rao, Z., & Wang, S. (2011) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2011.07.096 · Cited by 1,207
Phase change materials for smart textiles – An overview
Mondal, S. (2008) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2007.08.009 · Cited by 1,171
PCM thermal storage in buildings: A state of art
Tyagi, V. V., & Buddhi, D. (2007) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2005.10.002 · Cited by 1,090
Thermoelectricity in Semiconductor Nanostructures
Majumdar, A. (2004) · Science · doi:10.1126/science.1093164 · Cited by 981
A review of thermoelectric cooling: Materials, modeling and applications
Zhao, D., & Tan, G. (2014) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2014.01.074 · Cited by 968
Thermal modeling of a cylindrical LiFePO4/graphite lithium-ion battery
Forgez, C., Vinh Do, D., Friedrich, G., Morcrette, M., & Delacourt, C. (2010) · Journal of Power Sources · doi:10.1016/j.jpowsour.2009.10.105 · Cited by 942
Recent development and application of thermoelectric generator and cooler
He, W., Zhang, G., Zhang, X., Ji, J., Li, G., & Zhao, X. (2015) · Applied Energy · doi:10.1016/j.apenergy.2014.12.075 · Cited by 816
Phase change materials (PCM) for cooling applications in buildings: A review
Souayfane, F., Fardoun, F., & Biwole, P.-H. (2016) · Energy and Buildings · doi:10.1016/j.enbuild.2016.04.006 · Cited by 813
Thermal stability of phase change materials used in latent heat energy storage systems: A review
Rathod, M. K., & Banerjee, J. (2013) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2012.10.022 · Cited by 767
Ling, Z., Wang, F., Fang, X., Gao, X., & Zhang, Z. (2015) · Applied Energy · doi:10.1016/j.apenergy.2015.03.080 · Cited by 726
Wang, T., Tseng, K. J., Zhao, J., & Wei, Z. (2014) · Applied Energy · doi:10.1016/j.apenergy.2014.08.013 · Cited by 713
Sabbah, R., Kizilel, R., Selman, J. R., & Al-Hallaj, S. (2008) · Journal of Power Sources · doi:10.1016/j.jpowsour.2008.03.082 · Cited by 680
A Novel Thermal Management System for Electric Vehicle Batteries Using Phase-Change Material
Hallaj, S. A., & Selman, J. R. (2000) · Journal of The Electrochemical Society · doi:10.1149/1.1393888 · Cited by 662
A General Discussion of Li Ion Battery Safety
(2012) · Electrochemical Society Interface · doi:10.1149/2.f03122if · Cited by 592
Ling, Z., Zhang, Z., Shi, G., Fang, X., Wang, L., Gao, X., Fang, Y., Xu, T., Wang, S., & Liu, X. (2014) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2013.12.017 · Cited by 558
Siddique, A. R. M., Mahmud, S., & Heyst, B. V. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.01.177 · Cited by 551
Self-citationGraphene-enhanced hybrid phase change materials for thermal management of Li-ion batteries
Goli, P., Legedza, S., Dhar, A., Salgado, R., Renteria, J., & Balandin, A. A. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.08.135 · Cited by 547
Fan, L., Khodadadi, J. M., & Pesaran, A. A. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.03.050 · Cited by 534
Zhang, H., Wang, X., & Wu, D. (2010) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2009.11.036 · Cited by 534
Phase change material (PCM) storage for free cooling of buildings—A review
Waqas, A., & Ud Din, Z. (2013) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2012.10.034 · Cited by 532
An alternative cooling system to enhance the safety of Li-ion battery packs
Kizilel, R., Sabbah, R., Selman, J. R., & Al-Hallaj, S. (2009) · Journal of Power Sources · doi:10.1016/j.jpowsour.2009.06.074 · Cited by 513
Material and manufacturing cost considerations for thermoelectrics
LeBlanc, S., Yee, S. K., Scullin, M. L., Dames, C., & Goodson, K. E. (2014) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2013.12.030 · Cited by 503
Cárdenas, B., & León, N. (2013) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2013.07.028 · Cited by 496
Experimental investigation on thermal management of electric vehicle battery with heat pipe
Rao, Z., Wang, S., Wu, M., Lin, Z., & Li, F. (2013) · Energy Conversion and Management · doi:10.1016/j.enconman.2012.08.014 · Cited by 486
Zhao, J., Rao, Z., & Li, Y. (2015) · Energy Conversion and Management · doi:10.1016/j.enconman.2015.06.056 · Cited by 481
Zou, D., Ma, X., Liu, X., Zheng, P., & Hu, Y. (2018) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2017.12.024 · Cited by 461
Wu, W., Yang, X., Zhang, G., Chen, K., & Wang, S. (2017) · Energy Conversion and Management · doi:10.1016/j.enconman.2017.02.022 · Cited by 455
Capacity fade of Sony 18650 cells cycled at elevated temperatures
Ramadass, P., Haran, B., White, R., & Popov, B. N. (2002) · Journal of Power Sources · doi:10.1016/s0378-7753(02)00474-3 · Cited by 450
Electric vehicles batteries thermal management systems employing phase change materials
Ianniciello, L., Biwolé, P. H., & Achard, P. (2018) · Journal of Power Sources · doi:10.1016/j.jpowsour.2017.12.071 · Cited by 426
Wang, Z., Zhang, Z., Jia, L., & Yang, L. (2015) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2015.01.009 · Cited by 425
Li, W. Q., Qu, Z. G., He, Y. L., & Tao, Y. B. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.01.006 · Cited by 416
Khateeb, S. A., Amiruddin, S., Farid, M., Selman, J. R., & Al-Hallaj, S. (2005) · Journal of Power Sources · doi:10.1016/j.jpowsour.2004.09.033 · Cited by 410
Rao, Z., Wang, Q., & Huang, C. (2016) · Applied Energy · doi:10.1016/j.apenergy.2015.12.021 · Cited by 404
Application of phase change materials in thermal management of electronics
Kandasamy, R., Wang, X.-Q., & Mujumdar, A. S. (2007) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2006.12.013 · Cited by 392
Thermal management of a Li-ion battery using carbon fiber-PCM composites
Babapoor, A., Azizi, M., & Karimi, G. (2015) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2015.02.068 · Cited by 380
Heat dissipation design for lithium-ion batteries
Wu, M.-S., Liu, K. H., Wang, Y.-Y., & Wan, C.-C. (2002) · Journal of Power Sources · doi:10.1016/s0378-7753(02)00048-4 · Cited by 373
Samimi, F., Babapoor, A., Azizi, M., & Karimi, G. (2016) · Energy · doi:10.1016/j.energy.2015.12.064 · Cited by 372
Heat transfer and thermal management with PCMs in a Li-ion battery cell for electric vehicles
Javani, N., Dincer, I., Naterer, G. F., & Yilbas, B. S. (2014) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2013.12.076 · Cited by 370
Thermal Modeling of Porous Insertion Electrodes
Thomas, K. E., & Newman, J. (2003) · Journal of The Electrochemical Society · doi:10.1149/1.1531194 · Cited by 356
Challenges and future developments in proton exchange membrane fuel cells
Sopian, K., & Wan Daud, W. R. (2006) · Renewable Energy · doi:10.1016/j.renene.2005.09.003 · Cited by 354
Graphene Thermal Properties: Applications in Thermal Management and Energy Storage
Renteria, J., Nika, D., & Balandin, A. (2014) · Applied Sciences · doi:10.3390/app4040525 · Cited by 354
Review of PCM based cooling technologies for buildings
Osterman, E., Tyagi, V. V., Butala, V., Rahim, N. A., & Stritih, U. (2012) · Energy and Buildings · doi:10.1016/j.enbuild.2012.03.022 · Cited by 351
Zhao, R., Zhang, S., Liu, J., & Gu, J. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2015.09.001 · Cited by 343
Failure propagation in multi-cell lithium ion batteries
Lamb, J., Orendorff, C. J., Steele, L. A. M., & Spangler, S. W. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.10.081 · Cited by 335
Heat transfer in phase change materials for thermal management of electric vehicle battery modules
Duan, X., & Naterer, G. F. (2010) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2010.07.044 · Cited by 335
Jiang, G., Huang, J., Fu, Y., Cao, M., & Liu, M. (2016) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2016.07.197 · Cited by 335
Experimental investigation on EV battery cooling and heating by heat pipes
Wang, Q., Jiang, B., Xue, Q. F., Sun, H. L., Li, B., Zou, H. M., & Yan, Y. Y. (2015) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2014.09.083 · Cited by 329
Rao, Z., Wang, S., & Zhang, G. (2011) · Energy Conversion and Management · doi:10.1016/j.enconman.2011.07.009 · Cited by 322
Ling, Z., Chen, J., Fang, X., Zhang, Z., Xu, T., Gao, X., & Wang, S. (2014) · Applied Energy · doi:10.1016/j.apenergy.2014.01.075 · Cited by 311
Modeling for the scale-up of a lithium-ion polymer battery
Kim, U. S., Shin, C. B., & Kim, C.-S. (2009) · Journal of Power Sources · doi:10.1016/j.jpowsour.2008.10.019 · Cited by 308
Bai, F., Chen, M., Song, W., Feng, Z., Li, Y., & Ding, Y. (2017) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2017.07.141 · Cited by 303
Kizilel, R., Lateef, A., Sabbah, R., Farid, M. M., Selman, J. R., & Al-Hallaj, S. (2008) · Journal of Power Sources · doi:10.1016/j.jpowsour.2008.04.050 · Cited by 301
Zhao, J., Rao, Z., Huo, Y., Liu, X., & Li, Y. (2015) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2015.04.012 · Cited by 296
Thermal energy storage with phase change material—A state-of-the art review
Nkwetta, D. N., & Haghighat, F. (2014) · Sustainable Cities and Society · doi:10.1016/j.scs.2013.05.007 · Cited by 296
Hussain, A., Abidi, I. H., Tso, C. Y., Chan, K. C., Luo, Z., & Chao, C. Y. H. (2018) · International Journal of Thermal Sciences · doi:10.1016/j.ijthermalsci.2017.09.019 · Cited by 293
Effect of electrode configuration on the thermal behavior of a lithium-polymer battery
Kim, U. S., Shin, C. B., & Kim, C.-S. (2008) · Journal of Power Sources · doi:10.1016/j.jpowsour.2007.09.054 · Cited by 292
Fleckenstein, M., Bohlen, O., Roscher, M. A., & Bäker, B. (2011) · Journal of Power Sources · doi:10.1016/j.jpowsour.2011.01.043 · Cited by 290
Thermal analysis and two-directional air flow thermal management for lithium-ion battery pack
Yu, K., Yang, X., Cheng, Y., & Li, C. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.07.086 · Cited by 282
Lv, Y., Yang, X., Li, X., Zhang, G., Wang, Z., & Yang, C. (2016) · Applied Energy · doi:10.1016/j.apenergy.2016.06.058 · Cited by 282
Greco, A., Cao, D., Jiang, X., & Yang, H. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.02.004 · Cited by 280
Experimental investigation on the feasibility of heat pipe cooling for HEV/EV lithium-ion battery
Tran, T.-H., Harmand, S., Desmet, B., & Filangi, S. (2014) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2013.11.048 · Cited by 279
A review of solar thermal refrigeration and cooling methods
Ullah, K., Saidur, R., Ping, H. W., Akikur, R. K., & Shuvo, N. H. (2013) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2013.03.024 · Cited by 278
Mohammadian, S. K., & Zhang, Y. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.09.110 · Cited by 269
Wu, W., Yang, X., Zhang, G., Ke, X., Wang, Z., Situ, W., Li, X., & Zhang, J. (2016) · Energy · doi:10.1016/j.energy.2016.07.119 · Cited by 266
Lin, C., Xu, S., Chang, G., & Liu, J. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.11.068 · Cited by 263
Wang, T., Tseng, K. J., & Zhao, J. (2015) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2015.07.033 · Cited by 259
Fathabadi, H. (2014) · Energy · doi:10.1016/j.energy.2014.04.046 · Cited by 258
Putra, N., Ariantara, B., & Pamungkas, R. A. (2016) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2016.01.123 · Cited by 257
Malik, M., Dincer, I., & Rosen, M. A. (2016) · International Journal of Energy Research · doi:10.1002/er.3496 · Cited by 257
Alipanah, M., & Li, X. (2016) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2016.07.010 · Cited by 257
Simulation of passive thermal management system for lithium-ion battery packs
Mills, A., & Al-Hallaj, S. (2005) · Journal of Power Sources · doi:10.1016/j.jpowsour.2004.09.025 · Cited by 254
Modeling of passive thermal management for electric vehicle battery packs with PCM between cells
Javani, N., Dincer, I., Naterer, G. F., & Rohrauer, G. L. (2014) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2014.07.037 · Cited by 249
The effect of thermal gradients on the performance of lithium-ion batteries
Troxler, Y., Wu, B., Marinescu, M., Yufit, V., Patel, Y., Marquis, A. J., Brandon, N. P., & Offer, G. J. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.06.084 · Cited by 239
Research on the heat dissipation performance of battery pack based on forced air cooling
Xu, X. M., & He, R. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.03.004 · Cited by 237
Power requirements for batteries in hybrid electric vehicles
Nelson, R. F. (2000) · Journal of Power Sources · doi:10.1016/s0378-7753(00)00483-3 · Cited by 232
Qu, Z. G., Li, W. Q., & Tao, W. Q. (2014) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2013.12.136 · Cited by 230
Thermal management optimization of a prismatic battery with shape-stabilized phase change material
Wu, W., Wu, W., & Wang, S. (2018) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2018.01.062 · Cited by 222
Experimental performances of a battery thermal management system using a phase change material
Hémery, C.-V., Pra, F., Robin, J.-F., & Marty, P. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.07.147 · Cited by 220
Greco, A., Jiang, X., & Cao, D. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.12.027 · Cited by 219
Xun, J., Liu, R., & Jiao, K. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.01.095 · Cited by 216
Wang, Q., Rao, Z., Huo, Y., & Wang, S. (2016) · International Journal of Thermal Sciences · doi:10.1016/j.ijthermalsci.2015.11.005 · Cited by 213
Lv, Y., Situ, W., Yang, X., Zhang, G., & Wang, Z. (2018) · Energy Conversion and Management · doi:10.1016/j.enconman.2018.02.061 · Cited by 207
Numerical study on the thermal performance of a composite board in battery thermal management system
Yan, J., Wang, Q., Li, K., & Sun, J. (2016) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2016.05.187 · Cited by 202
Karimi, G., Azizi, M., & Babapoor, A. (2016) · Journal of Energy Storage · doi:10.1016/j.est.2016.08.005 · Cited by 202
Lazrak, A., Fourmigué, J.-F., & Robin, J.-F. (2017) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2017.08.172 · Cited by 200
Surface Cooling Causes Accelerated Degradation Compared to Tab Cooling for Lithium-Ion Pouch Cells
Hunt, I. A., Zhao, Y., Patel, Y., & Offer, J. (2016) · Journal of The Electrochemical Society · doi:10.1149/2.0361609jes · Cited by 199
Thermal–electrochemical model for passive thermal management of a spiral-wound lithium-ion battery
Somasundaram, K., Birgersson, E., & Mujumdar, A. S. (2012) · Journal of Power Sources · doi:10.1016/j.jpowsour.2011.11.075 · Cited by 196
Modelling the thermal behaviour of a lithium-ion battery during charge
Kim, U. S., Yi, J., Shin, C. B., Han, T., & Park, S. (2011) · Journal of Power Sources · doi:10.1016/j.jpowsour.2011.01.103 · Cited by 195
Jiang, G., Huang, J., Liu, M., & Cao, M. (2017) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2017.03.107 · Cited by 194
Li, Z., Zhang, J., Wu, B., Huang, J., Nie, Z., Sun, Y., An, F., & Wu, N. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.04.117 · Cited by 192
Tran, T.-H., Harmand, S., & Sahut, B. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.04.130 · Cited by 191
Status and development of electric vehicle integrated thermal management from BTM to HVAC
Zhang, T., Gao, C., Gao, Q., Wang, G., Liu, M., Guo, Y., Xiao, C., & Yan, Y. Y. (2015) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2015.02.001 · Cited by 189
Rao, Z., Huo, Y., Liu, X., & Zhang, G. (2015) · Journal of the Energy Institute · doi:10.1016/j.joei.2014.09.006 · Cited by 179
Visualization of Charge Distribution in a Lithium Battery Electrode
Liu, J., Kunz, M., Chen, K., Tamura, N., & Richardson, T. J. (2010) · The Journal of Physical Chemistry Letters · doi:10.1021/jz100634n · Cited by 179
The use of PCM panels to improve storage condition of frozen food
Gin, B., & Farid, M. M. (2010) · Journal of Food Engineering · doi:10.1016/j.jfoodeng.2010.04.016 · Cited by 172
Zhao, R., Gu, J., & Liu, J. (2017) · Energy · doi:10.1016/j.energy.2017.06.168 · Cited by 172
Impact of the electric vehicles on the air pollution from a highway
Ferrero, E., Alessandrini, S., & Balanzino, A. (2016) · Applied Energy · doi:10.1016/j.apenergy.2016.01.098 · Cited by 167
Solid-State Thermal Management for Lithium-Ion EV Batteries
Alaoui, C. (2013) · IEEE Transactions on Vehicular Technology · doi:10.1109/tvt.2012.2214246 · Cited by 166
Investigation of the thermal performance of axial-flow air cooling for the lithium-ion battery pack
Yang, T., Yang, N., Zhang, X., & Li, G. (2016) · International Journal of Thermal Sciences · doi:10.1016/j.ijthermalsci.2016.05.009 · Cited by 166
Experimental investigation of a pulsating heat pipe for hybrid vehicle applications
Burban, G., Ayel, V., Alexandre, A., Lagonotte, P., Bertin, Y., & Romestant, C. (2012) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2012.05.037 · Cited by 165
Robinson, J. B., Darr, J. A., Eastwood, D. S., Hinds, G., Lee, P. D., Shearing, P. R., Taiwo, O. O., & Brett, D. J. L. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.11.059 · Cited by 164
Optimization of thermal management system for Li-ion batteries using phase change material
Li, Y., Du, Y., Xu, T., Wu, H., Zhou, X., Ling, Z., & Zhang, Z. (2018) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2017.12.055 · Cited by 164
Effects of entropy changes in anodes and cathodes on the thermal behavior of lithium ion batteries
Williford, R. E., Viswanathan, V. V., & Zhang, J.-G. (2009) · Journal of Power Sources · doi:10.1016/j.jpowsour.2008.10.078 · Cited by 162
Experimental study of an OHP-cooled thermal management system for electric vehicle power battery
Rao, Z., Huo, Y., & Liu, X. (2014) · Experimental Thermal and Fluid Science · doi:10.1016/j.expthermflusci.2014.03.017 · Cited by 162
Ye, Y., Shi, Y., Saw, L. H., & Tay, A. A. O. (2016) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2015.09.052 · Cited by 162
Towards an Ultimate Battery Thermal Management System: A Review
Khan, M. R., Swierczynski, M. J., & Kær, S. K. (2017) · Batteries · doi:10.3390/batteries3010009 · Cited by 162
Samba, A., Omar, N., Gualous, H., Capron, O., den Bossche, P. V., & Mierlo, J. V. (2014) · Electrochimica Acta · doi:10.1016/j.electacta.2014.08.115 · Cited by 161
Mohammadian, S. K., Rassoulinejad-Mousavi, S. M., & Zhang, Y. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2015.07.056 · Cited by 161
He, W., Zhou, J., Hou, J., et al. (2013) · Applied Energy · doi:10.1016/j.apenergy.2013.01.055 · Cited by 160
Numerical investigation of thermal behaviors in lithium-ion battery stack discharge
Liu, R., Chen, J., Xun, J., Jiao, K., & Du, Q. (2014) · Applied Energy · doi:10.1016/j.apenergy.2014.07.024 · Cited by 160
Tomizawa, Y., SASAKI, K., Kuroda, A., Takeda, R., & Kaito, Y. (2015) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2015.12.056 · Cited by 159
Cheng, T., Cheng, C., Huang, Z.-Z., & Liao, G.-C. (2010) · Energy · doi:10.1016/j.energy.2010.10.061 · Cited by 151
Improving thermal performance of freezers using phase change materials
Oró, E., Miró, L., Farid, M. M., & Cabeza, L. F. (2012) · International Journal of Refrigeration · doi:10.1016/j.ijrefrig.2012.01.004 · Cited by 150
Thermal Design for the Pouch-Type Large-Format Lithium-Ion Batteries
Wu, B., Li, Z., & Zhang, J. (2014) · Journal of The Electrochemical Society · doi:10.1149/2.0831501jes · Cited by 142
Thermal Management of Electric Vehicle Battery Systems
Dinçer, İ., Hamut, H. S., & Javani, N. (2016) · Wiley eBooks · doi:10.1002/9781118900239 · Cited by 142
Thermal/electrical modeling for abuse-tolerant design of lithium ion modules
Smith, K. A., Kim, G., Darcy, E. C., & Pesaran, A. A. (2009) · International Journal of Energy Research · doi:10.1002/er.1666 · Cited by 132
100 Wh Large size Li-ion batteries and safety tests
Kitoh, K., & Nemoto, H. (1999) · Journal of Power Sources · doi:10.1016/s0378-7753(99)00125-1 · Cited by 131
A Novel Thermal Management for Electric and Hybrid Vehicles
Alaoui, C., & Salameh, Z. M. (2005) · IEEE Transactions on Vehicular Technology · doi:10.1109/tvt.2004.842444 · Cited by 129
Worwood, D., Kellner, Q., Wojtala, M., Widanage, W. D., McGlen, R. J., Greenwood, D. G., & Marco, J. (2017) · Journal of Power Sources · doi:10.1016/j.jpowsour.2017.02.023 · Cited by 129
Battery and battery management for hybrid electric vehicles: a review
Conte, F. V. (2006) · e+i Elektrotechnik und Informationstechnik · doi:10.1007/s00502-006-0383-6 · Cited by 127
Malik, M., Dinçer, İ., Rosen, M. A., & Fowler, M. W. (2017) · Electrochimica Acta · doi:10.1016/j.electacta.2017.10.051 · Cited by 119
Heat transfer and thermal management of electric vehicle batteries with phase change materials
Ramandi, M. Y., Dinçer, İ., & Naterer, G. F. (2011) · Heat and Mass Transfer · doi:10.1007/s00231-011-0766-z · Cited by 114
Review on phase change material based free cooling of buildings—The way toward sustainability
Muthuvelan, T., Panchabikesan, K., Krishna Mohan, N., & Velraj, R. (2015) · Journal of Energy Storage · doi:10.1016/j.est.2015.09.003 · Cited by 111
Yang, H., Zhang, H., Sui, Y., & Yang, C. (2017) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2017.09.022 · Cited by 110
Huo, Y., & Rao, Z. (2016) · Energy Conversion and Management · doi:10.1016/j.enconman.2016.12.009 · Cited by 109
Overcharge investigation of lithium-ion polymer batteries
Zeng, Y., Wu, K. M., Wang, D., Wang, Z., & Chen, L. (2006) · Journal of Power Sources · doi:10.1016/j.jpowsour.2006.02.009 · Cited by 108
Shang, S., Xie, Y., Li, M., Yuan, Y., Yu, J., Wu, H., Liu, B., & Liu, N. (2017) · Energy Conversion and Management · doi:10.1016/j.enconman.2017.01.069 · Cited by 102
A novel phase change based cooling system for prismatic lithium ion batteries
Al‐Zareer, M., Dinçer, İ., & Rosen, M. A. (2017) · International Journal of Refrigeration · doi:10.1016/j.ijrefrig.2017.12.005 · Cited by 95
Wang, Z., Li, X., Zhang, G., Lv, Y., Wang, C., He, F., Yang, C., & Yang, C. (2017) · RSC Advances · doi:10.1039/c7ra08181b · Cited by 91
Liu, Y., Yang, S., Guo, B., & Deng, C. L. (2014) · Advances in Mechanical Engineering · doi:10.1155/2014/852712 · Cited by 82
Thermal charging performance of enhanced phase change material composites for thermal battery design
Mallow, A., Abdelaziz, O. A., & Graham, S. L. (2018) · International Journal of Thermal Sciences · doi:10.1016/j.ijthermalsci.2017.12.027 · Cited by 82
Numerical modeling of lithium ion battery for predicting thermal behavior in a cylindrical cell
Jeon, D. H. (2013) · Current Applied Physics · doi:10.1016/j.cap.2013.11.006 · Cited by 69
Thermal Management with Phase Change Material for a Power Battery under Cold Temperatures
Rao, Z., Wang, S. F., & Zhang, Y. (2014) · Energy Sources Part A Recovery Utilization and Environmental Effects · doi:10.1080/15567036.2011.576411 · Cited by 67
Miranda, A. G., Chen, T. S., & Hong, C. (2013) · Energy · doi:10.1016/j.energy.2013.07.013 · Cited by 62
Gulfam, R., Zhu, W., Xu, L. M., Cheema, I. I., Sheng, P., Zhao, G., & Deng, Y. (2017) · Energy Conversion and Management · doi:10.1016/j.enconman.2017.10.098 · Cited by 43
Modeling and simulation of a Thermal Management System for Electric Vehicles
Salameh, Z. M., & Alaoui, C. (2004) · Annual Conference of the IEEE Industrial Electronics Society (IECON) · doi:10.1109/iecon.2003.1280100 · Cited by 37
Etudes des phénomènes thermiques dans les batteries Li-ion.
Hémery, C.-V. (2013) · theses.fr (ABES) · doi:10.70675/5b1690f6z2113z4583za239z79e9bfa10dd6 · Cited by 30
Esfahanian, V., Renani, S. A., Nehzati, H., Mirkhani, N., Esfahanian, M., Yaghoobi, O., & Safaei, A. (2012) · Lecture notes in electrical engineering · doi:10.1007/978-3-642-33777-2_37 · Cited by 28
Mohammadian, S. K., & Zhang, Y. (2016) · ASME Journal of Heat and Mass Transfer · doi:10.1115/1.4033811 · Cited by 26
Thermal modeling of passive thermal management system with phase change material for LiFePO4 battery
Jianhua, C., Gao, D., Jiexun, L., et al. (2012) · IEEE Vehicle Power and Propulsion Conference (VPPC) · doi:10.1109/vppc.2012.6422582 · Cited by 13
Thermal design analysis and performance test of a 1kW thermoelectric battery cooler
Kim, S. C., Lee, K., Park, S. H., & Kim, J. H. (2014) · I-THERM :/I-THERM - Intersociety Conference on Thermal Phenomena in Electronic Systems · doi:10.1109/itherm.2014.6892446 · Cited by 10
Deng, Y., Zhang, H., & Xia, X. (2016) · IOP Conference Series Earth and Environmental Science · doi:10.1088/1755-1315/40/1/012045 · Cited by 8
Cited by
An Overview of Hydrogen Production: Current Status, Potential, and Challenges
Younas, M., Shafique, S., Hafeez, A., Javed, F., & Rehman, F. (2022) · Fuel · doi:10.1016/j.fuel.2022.123317 · Cited by 780
Recent advances of thermal safety of lithium ion battery for energy storage
Lyu, P., Liu, X., Qu, J., Zhao, J., Huo, Y., Qu, Z., & Rao, Z. (2020) · Energy Storage Materials · doi:10.1016/j.ensm.2020.06.042 · Cited by 624
A review on recent progress, challenges and perspective of battery thermal management system
Lin, J., Liu, X., Li, S., Zhang, C., & Yang, S. (2021) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2020.120834 · Cited by 588
Phase change material-integrated latent heat storage systems for sustainable energy solutions
Aftab, W., Usman, A., Shi, J., Yuan, K., Qin, M., & Zou, R. (2021) · Energy & Environmental Science · doi:10.1039/d1ee00527h · Cited by 536
Hu, X., Zheng, Y., Howey, D. A., Perez, H., Foley, A., & Pecht, M. (2020) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2019.100806 · Cited by 443
Metadata
- Authors
- Siddique, A. R. M., Mahmud, S., & Heyst, B. V.
- Venue
- Journal of Power Sources
- Publisher
- Elsevier BV
- Published
- 2018-10
- Volume
- 401
- Pages
- 224-237
- ISSN
- 0378-7753 (ISSN-L)
- OpenAlex
- W2889808748
- Cited by
- 310
- References
- 153
- FWCI
- 9.59
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.