The DOI matches its Crossref record; 74 of the 74 references it cites were found in a registry or an index.
Modeling and simulation of inhomogeneities in a 18650 nickel-rich, silicon-graphite lithium-ion cell during fast charging
Open accessAbstract
Abstract Recent high-energy lithium-ion batteries contain highly densified electrodes, but they are expected to endure fast charging without safety compromises or accelerated aging. To investigate fast charging strategies, we use a multi-dimensional model consisting of several newman-type electrochemical models (p2D) coupled to an electrical-thermal cell domain model. Open-circuit potential, infrared thermography and calorimetry experiments of a high-energy 18650 NMC-811/SiC lithium-ion cell are used for model parameterization and validation. First, a single p2D model is used to compare the charging rate capabilities of NMC-811/SiC and NMC-111/graphite cells. We assess the modeling error of the single p2D model relative to the multi-dimensional model as a function of tab design. The multi-dimensional model is then used to study different tab and electrode designs regarding their susceptibility to lithium plating, which is evaluated based on local anode overpotential and local temperature. High-rate charging current profiles that minimize the risk of lithium plating are derived by implementing an anode potential threshold. We show that a state of charge beyond 60% can be reached in less than 18 min.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
1 retracted
Dash, R. K., & Pannala, S. (2016) · Scientific Reports · doi:10.1038/srep27449 · Cited by 108
RetractedBruggeman, D. A. G. (1935) · Annalen der Physik · doi:10.1002/andp.19354160705 · Cited by 8,645
High-performance lithium battery anodes using silicon nanowires
Chan, C. K., Peng, H., Liu, G., McIlwrath, K., Zhang, X. F., Huggins, R. A., & Cui, Y. (2008) · Nature Nanotechnology · doi:10.1038/nnano.2007.411 · Cited by 6,683
Modeling of Galvanostatic Charge and Discharge of the Lithium/Polymer/Insertion Cell
Doyle, M., Fuller, T. F., & Newman, J. (1993) · Journal of The Electrochemical Society · doi:10.1149/1.2221597 · Cited by 4,328 · cited 2×
“The electrochemical model used in this work is the widely applied newmantype p2D model [22] which is based on porous electrode theory, reaction kinetics and concentrated solution theory [66].”
MethodA General Energy Balance for Battery Systems
Bernardi, D., Pawlikowski, E., & Newman, J. (1985) · Journal of The Electrochemical Society · doi:10.1149/1.2113792 · Cited by 2,548 · cited 1×
“[89] Γ Only at the surface of the jelly roll x∗ = x ∈ [0, Lneg ] ∧ [Lneg + Lsep, Lneg + Lsep + Lpos] ** < 0 for cc,- and > 0 cc,+ 47”
BackgroundNoh, H.-J., Youn, S., Yoon, C. S., & Sun, Y.-K. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.01.063 · Cited by 2,302
High-performance lithium-ion anodes using a hierarchical bottom-up approach
Magasinski, A., Dixon, P., Hertzberg, B., Kvit, A., Ayala, J., & Yushin, G. (2010) · Nature Materials · doi:10.1038/nmat2725 · Cited by 2,044
The development and future of lithium ion batteries
Blomgren, G. E. (2017) · Journal of The Electrochemical Society · doi:10.1149/2.0251701jes · Cited by 1,940
Über die Reaktionsgeschwindigkeit bei der Inversion von Rohrzucker durch Säuren
Arrhenius, S. (1889) · Zeitschrift für Physikalische Chemie · doi:10.1515/zpch-1889-0416 · Cited by 1,577
Myung, S.-T., Maglia, F., Park, K.-J., Yoon, C. S., Lamp, P., Kim, S.-J., & Sun, Y.-K. (2017) · ACS Energy Letters · doi:10.1021/acsenergylett.6b00594 · Cited by 1,382
Jung, R., Metzger, M., Maglia, F., Stinner, C., & Gasteiger, H. A. (2017) · Journal of The Electrochemical Society · doi:10.1149/2.0021707jes · Cited by 1,350
In Situ XRD and Electrochemical Study of the Reaction of Lithium with Amorphous Silicon
Hatchard, T. D., & Dahn, J. R. (2004) · Journal of The Electrochemical Society · doi:10.1149/1.1739217 · Cited by 1,113
Ohzuku, T., Iwakoshi, Y., & Sawai, K. (1993) · Journal of The Electrochemical Society · doi:10.1149/1.2220849 · Cited by 1,089
Yang, X.-G., Leng, Y., Zhang, G., Ge, S., & Wang, C.-Y. (2017) · Journal of Power Sources · doi:10.1016/j.jpowsour.2017.05.110 · Cited by 948
Transport Properties of LiPF[sub 6]-Based Li-Ion Battery Electrolytes
Valo̸en, L. O., & Reimers, J. N. (2005) · Journal of The Electrochemical Society · doi:10.1149/1.1872737 · Cited by 935
Future generations of cathode materials: an automotive industry perspective
Andre, D., Kim, S.-J., Lamp, P., Lux, S. F., Maglia, F., Paschos, O., & Stiaszny, B. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta00361j · Cited by 806
Bruggeman, D. (1935) · Annals of Physics · Cited by 715
Thermal analysis of lithium-ion batteries
Chen, S. C., Wan, C. C., & Wang, Y. Y. (2005) · Journal of Power Sources · doi:10.1016/j.jpowsour.2004.05.064 · Cited by 708
Optimizing Areal Capacities through Understanding the Limitations of Lithium-Ion Electrodes
Gallagher, K. G., Trask, S. E., Bauer, C., Woehrle, T., Lux, S. F., Tschech, M., Lamp, P., Polzin, B. J., Ha, S., Long, B., et al. (2016) · Journal of The Electrochemical Society · doi:10.1149/2.0321602jes · Cited by 646
Long, C. M., Nascarella, M. A., & Valberg, P. A. (2013) · Environmental Pollution · doi:10.1016/j.envpol.2013.06.009 · Cited by 558
Thermal Analysis of Lithium‐Ion Batteries
Chen, Y., & Evans, J. W. (1996) · Journal of The Electrochemical Society · doi:10.1149/1.1837095 · Cited by 545
Li, J.-Y., Xu, Q., Li, G., Yin, Y.-X., Wan, L.-J., & Guo, Y.-G. (2017) · Materials Chemistry Frontiers · doi:10.1039/c6qm00302h · Cited by 384
Viswanathan, V. V., Choi, D., Wang, D., Xu, W., Towne, S., Williford, R. E., Zhang, J.-G., Liu, J., & Yang, Z. (2010) · Journal of Power Sources · doi:10.1016/j.jpowsour.2009.11.103 · Cited by 383
Understanding the trilemma of fast charging, energy density and cycle life of lithium-ion batteries
Yang, X.-G., & Wang, C.-Y. (2018) · Journal of Power Sources · doi:10.1016/j.jpowsour.2018.09.069 · Cited by 365
Legrand, N., Knosp, B., Desprez, P., Lapicque, F., & Raël, S. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.06.130 · Cited by 357
A Guide to Li-Ion Coin-Cell Electrode Making for Academic Researchers
Marks, T., Trussler, S., Smith, A. J., Xiong, D., & Dahn, J. R. (2011) · Journal of The Electrochemical Society · doi:10.1149/1.3515072 · Cited by 290
Han, X., Ouyang, M., Lu, L., & Li, J. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.08.089 · Cited by 258
Electronic Structure and Comparative Properties of LiNi x Mn y Co z O 2 Cathode Materials
Sun, H., & Zhao, K. (2017) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.7b00810 · Cited by 246
Yang, X.-G., Ge, S., Liu, T., Leng, Y., & Wang, C.-Y. (2018) · Journal of Power Sources · doi:10.1016/j.jpowsour.2018.05.073 · Cited by 242
In Situ Measurement of Radial Temperature Distributions in Cylindrical Li-Ion Cells
Zhang, G., Cao, L., Ge, S., Wang, C.-Y., Shaffer, C. E., & Rahn, C. D. (2014) · Journal of The Electrochemical Society · doi:10.1149/2.0051410jes · Cited by 238
Heats of mixing and of entropy in porous insertion electrodes
Thomas, K. E., & Newman, J. (2003) · Journal of Power Sources · doi:10.1016/s0378-7753(03)00283-0 · Cited by 230
Liu, G., Zheng, H., Simens, A. S., Minor, A. M., Song, X., & Battaglia, V. S. (2007) · Journal of The Electrochemical Society · doi:10.1149/1.2792293 · Cited by 219
Lee, K.-J., Smith, K., Pesaran, A., & Kim, G.-H. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.03.007 · Cited by 212
Mathematical Modeling of Lithium Batteries
Thomas, K. E., Newman, J., & Darling, R. M. (2002) · Advances in Lithium-Ion Batteries · doi:10.1007/0-306-47508-1_13 · Cited by 206
Doyle, M., & Fuentes, Y. (2003) · Journal of The Electrochemical Society · doi:10.1149/1.1569478 · Cited by 201
Surface Cooling Causes Accelerated Degradation Compared to Tab Cooling for Lithium-Ion Pouch Cells
Hunt, I. A., Zhao, Y., Patel, Y., & Offer, J. (2016) · Journal of The Electrochemical Society · doi:10.1149/2.0361609jes · Cited by 199
Mixed silicon–graphite composites as anode material for lithium ion batteries
Dimov, N., Kugino, S., & Yoshio, M. (2004) · Journal of Power Sources · doi:10.1016/j.jpowsour.2004.05.012 · Cited by 197
Differential voltage analyses of high-power lithium-ion cells
Bloom, I., Christophersen, J. P., Abraham, D. P., & Gering, K. L. (2006) · Journal of Power Sources · doi:10.1016/j.jpowsour.2005.07.054 · Cited by 178
Chu, Z., Feng, X., Lu, L., Li, J., Han, X., & Ouyang, M. (2017) · Applied Energy · doi:10.1016/j.apenergy.2017.03.111 · Cited by 168
Differential voltage analyses of high-power lithium-ion cells
Bloom, I., Christophersen, J., & Gering, K. (2005) · Journal of Power Sources · doi:10.1016/j.jpowsour.2004.07.022 · Cited by 162
Effects of entropy changes in anodes and cathodes on the thermal behavior of lithium ion batteries
Williford, R. E., Viswanathan, V. V., & Zhang, J.-G. (2009) · Journal of Power Sources · doi:10.1016/j.jpowsour.2008.10.078 · Cited by 162
Thermodynamics and crystal structure anomalies in lithium-intercalated graphite
Yazami, R., & Reynier, Y. (2005) · Journal of Power Sources · doi:10.1016/j.jpowsour.2005.05.087 · Cited by 150
Spherical silicon/graphite/carbon composites as anode material for lithium-ion batteries
Lee, J., Kim, W.-J., Kim, J. J., et al. (2007) · Journal of Power Sources · doi:10.1016/j.jpowsour.2007.09.119 · Cited by 140
Amietszajew, T., McTurk, E., Fleming, J., & Bhagat, R. (2018) · Electrochimica Acta · doi:10.1016/j.electacta.2018.01.076 · Cited by 138
High capacity graphite–silicon composite anode material for lithium-ion batteries
Fuchsbichler, B., Stangl, C., Kren, H., Uhlig, F., & Koller, S. (2010) · Journal of Power Sources · doi:10.1016/j.jpowsour.2010.10.081 · Cited by 133
Optimum fast charging of lithium-ion pouch cells based on local volume expansion criteria
Spingler, F. B., Wittmann, W., Sturm, J., Rieger, B., & Jossen, A. (2018) · Journal of Power Sources · doi:10.1016/j.jpowsour.2018.04.095 · Cited by 122
Self-citationOptimization of Lithium Titanate Electrodes for High-Power Cells
Christensen, J., Srinivasan, V., & Newman, J. (2006) · Journal of The Electrochemical Society · doi:10.1149/1.2172535 · Cited by 111
FIB/SEM-based calculation of tortuosity in a porous LiCoO2 cathode for a Li-ion battery
Hutzenlaub, T., Asthana, A., Becker, J., Wheeler, D. R., Zengerle, R., & Thiele, S. (2012) · Electrochemistry Communications · doi:10.1016/j.elecom.2012.11.006 · Cited by 105
Bahiraei, F., Fartaj, A., & Nazri, G. (2017) · Electrochimica Acta · doi:10.1016/j.electacta.2017.09.084 · Cited by 98
Fast charge implications: Pack and cell analysis and comparison
Tanim, T. R., Shirk, M. G., Bewley, R. L., Dufek, E. J., & Liaw, B. Y. (2018) · Journal of Power Sources · doi:10.1016/j.jpowsour.2018.01.091 · Cited by 98
Erhard, S. V., Osswald, P. J., Keil, P., Höffer, E., Haug, M., Noel, A., Wilhelm, J., Rieger, B., Schmidt, K., Kosch, S., et al. (2017) · Journal of The Electrochemical Society · doi:10.1149/2.0551701jes · Cited by 97
Self-citationEffect of tab design on large-format Li-ion cell performance
Zhao, W., Luo, G., & Wang, C. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.12.146 · Cited by 95
Fast and Accurate Measurement of Entropy Profiles of Commercial Lithium-Ion Cells
Osswald, P. J., del Rosario, M., Garche, J., Jossen, A., & Hoster, H. E. (2015) · Electrochimica Acta · doi:10.1016/j.electacta.2015.01.191 · Cited by 90
Self-citationFleming, J., Amietszajew, T., McTurk, E., Towers, D. P., Greenwood, D., & Bhagat, R. (2018) · HardwareX · doi:10.1016/j.ohx.2018.04.001 · Cited by 88
Simulation of temperature rise in Li-ion cells at very high currents
Mao, J., TIEDEMANN, W. H., & Newman, J. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.08.033 · Cited by 81
Current density distribution in cylindrical Li-Ion cells during impedance measurements
Osswald, P. J., Erhard, S. V., Noel, A., Keil, P., Kindermann, F. M., Hoster, H. E., & Jossen, A. (2016) · Journal of Power Sources · doi:10.1016/j.jpowsour.2016.02.070 · Cited by 73
Self-citationKosch, S., Rheinfeld, A., Erhard, S. V., & Jossen, A. (2017) · Journal of Power Sources · doi:10.1016/j.jpowsour.2016.12.110 · Cited by 72
Self-citationMastali, M., Farkhondeh, M., Farhad, S., Fraser, R. A., & Fowler, M. W. (2016) · Journal of The Electrochemical Society · doi:10.1149/2.1151613jes · Cited by 69
McCleary, D. A. H., Meyers, J. P., & Kim, B. (2013) · Journal of The Electrochemical Society · doi:10.1149/2.023311jes · Cited by 66
Rieger, B., Erhard, S. V., Kosch, S., Venator, M., Rheinfeld, A., & Jossen, A. (2016) · Journal of The Electrochemical Society · doi:10.1149/2.1051614jes · Cited by 65
Self-citationDevelopment and Use of a Lithium-Metal Reference Electrode in Aging Studies of Lithium-Ion Batteries
Belt, J. R., Bernardi, D. M., & Utgikar, V. P. (2014) · Journal of The Electrochemical Society · doi:10.1149/2.062406jes · Cited by 62
Simulation and Measurement of Local Potentials of Modified Commercial Cylindrical Cells
Erhard, S. V., Osswald, P. J., Wilhelm, J., Rheinfeld, A., Kosch, S., & Jossen, A. (2015) · Journal of The Electrochemical Society · doi:10.1149/2.0431514jes · Cited by 62
Self-citationA Modified Multiphysics model for Lithium-Ion batteries with a LixNi1/3Mn1/3Co1/3O2 electrode
Smekens, J., Paulsen, J., Yang, W., Omar, N., Deconinck, J., Hubin, A., & Mierlo, J. V. (2015) · Electrochimica Acta · doi:10.1016/j.electacta.2015.06.015 · Cited by 60
Aging of Lithium-Ion Batteries in Electric Vehicles
Keil, P. (2017) · Cited by 54
A Computationally Efficient Multi-Scale Model for Lithium-Ion Cells
Kosch, S., Zhao, Y., Sturm, J., Schuster, J., Mulder, G., Ayerbe, E., & Jossen, A. (2018) · Journal of The Electrochemical Society · doi:10.1149/2.1241810jes · Cited by 53
Self-citationMathematical model for a spirally-wound lithium-ion cell
Guo, M., & White, R. E. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.11.023 · Cited by 51
Hollow Si/C composite as anode material for high performance lithium-ion battery
Zhang, H., Li, X., Guo, H., et al. (2016) · Powder Technology · doi:10.1016/j.powtec.2016.05.002 · Cited by 41
Model-Based Estimation of Reversible Heat Generation in Lithium-Ion Cells
Marcicki, J., & Yang, X. G. (2014) · Journal of The Electrochemical Society · doi:10.1149/2.0281412jes · Cited by 32
Rheinfeld, A., Kosch, S., Erhard, S. V., Osswald, P. J., Rieger, B., & Jossen, A. (2016) · Journal of The Electrochemical Society · doi:10.1149/2.0701614jes · Cited by 26
Self-citationUncertainties in entropy due to temperature path dependent voltage hysteresis in Li-ion cells
Zilberman, I., Rheinfeld, A., & Jossen, A. (2018) · Journal of Power Sources · doi:10.1016/j.jpowsour.2018.05.052 · Cited by 23
Self-citationOn the optimal sizing of batteries for electric vehicles and the influence of fast charge
Verbrugge, M. W., & Wampler, C. W. (2018) · Journal of Power Sources · doi:10.1016/j.jpowsour.2018.02.064 · Cited by 17
Si alloy/graphite coating design as anode for Li-ion batteries with high volumetric energy density
Du, Z., Li, J., Daniel, C., et al. (2017) · Electrochimica Acta · doi:10.1016/j.electacta.2017.09.087 · Cited by 15
Gostick, J. T. (2009) · UWSpace (University of Waterloo) · Cited by 12
Design and Simulation of Spirally-Wound, Lithium-Ion Cells
Spotnitz, R. M., Hartridge, S., Damblanc, G., Yeduvaka, G., Schad, D., Gudimetla, V., Votteler, J., Poole, G., Lueth, C. A., Walchshofer, C. F., et al. (2013) · ECS Transactions · doi:10.1149/05026.0209ecst · Cited by 11
Cited by
Lithium-ion batteries – Current state of the art and anticipated developments
Armand, M., Axmann, P., Bresser, D., Copley, M., Edström, K., Ekberg, C., Guyomard, D., Lestriez, B., Novák, P., Petranikova, M., et al. (2020) · Journal of Power Sources · doi:10.1016/j.jpowsour.2020.228708 · Cited by 888
Lithium-ion battery degradation: how to model it
O'Kane, S. E. J., Ai, W., Madabattula, G., Alonso-Alvarez, D., Timms, R., Sulzer, V., Edge, J. S., Wu, B., Offer, G. J., & Marinescu, M. (2022) · Physical Chemistry Chemical Physics · doi:10.1039/d2cp00417h · Cited by 400
Kim, N., Kim, Y., Sung, J., & Cho, J. (2023) · Nature Energy · doi:10.1038/s41560-023-01333-5 · Cited by 299
The Dilemma of C-Rate and Cycle Life for Lithium-Ion Batteries under Low Temperature Fast Charging
Gao, Z., Xie, H., Yang, X., Niu, W., Li, S., & Chen, S. (2022) · Batteries · doi:10.3390/batteries8110234 · Cited by 70
Kunz, A., Kirst, C., Durdel, A., Singer, J. P., & Jossen, A. (2025) · Journal of Power Sources · doi:10.1016/j.jpowsour.2024.235732 · Cited by 6
Self-citation
Metadata
- Authors
- Sturm, J., Rheinfeld, A., Zilberman, I., Spingler, F. B., Kosch, S., Frie, F., & Jossen, A.
- Venue
- Journal of Power Sources
- Publisher
- Elsevier BV
- Published
- 2019-02
- Volume
- 412
- Pages
- 204-223
- ISSN
- 0378-7753 (ISSN-L)
- OpenAlex
- W2902687257
- Cited by
- 300
- References
- 74
- FWCI
- 9.46
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.