The DOI matches its Crossref record; 312 of the 312 references it cites were found in a registry or an index.
Lithium-ion batteries – Current state of the art and anticipated developments
Open accessAbstract
Abstract Lithium-ion batteries are the state-of-the-art electrochemical energy storage technology for mobile electronic devices and electric vehicles. Accordingly, they have attracted a continuously increasing interest in academia and industry, which has led to a steady improvement in energy and power density, while the costs have decreased at even faster pace. Important questions, though, are, to which extent and how (fast) the performance can be further improved, and how the envisioned goal of truly sustainable energy storage can be realized. Herein, we combine a comprehensive review of important findings and developments in this field that have enabled their tremendous success with an overview of very recent trends concerning the active materials for the negative and positive electrode as well as the electrolyte. Moreover, we critically discuss current and anticipated electrode fabrication processes, as well as an essential prerequisite for “greener” batteries – the recycling. In each of these chapters, we eventually summarize important remaining challenges and propose potential directions for further improvement. Finally, we conclude this article with a brief summary of the performance metrics of commercial lithium-ion cells and a few thoughts towards the future development of this technology including several key performance indicators for the mid-term to long-term future.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
1 retracted
Items 201–312 of 312
Bockholt, H., Haselrieder, W., & Kwade, A. (2016) · Powder Technology · doi:10.1016/j.powtec.2016.04.011 · Cited by 177
Müller, S., Pietsch, P., Brandt, B.-E., Baade, P., De Andrade, V., De Carlo, F., & Wood, V. (2018) · Nature Communications · doi:10.1038/s41467-018-04477-1 · Cited by 177
Chemical Transformations in Li-Ion Battery Electrode Materials by Carbothermic Reduction
Lombardo, G., Ebin, B., St. J. Foreman, M. R., Steenari, B.-M., & Petranikova, M. (2019) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.8b06540 · Cited by 174
Self-citationLandesfeind, J., Ebner, M., Eldiven, A., Wood, V., & Gasteiger, H. A. (2018) · Journal of The Electrochemical Society · doi:10.1149/2.0231803jes · Cited by 170
Marinaro, M., Bresser, D., Beyer, E., Faguy, P., Hosoi, K., Li, H., Sakovica, J., Amine, K., Wohlfahrt-Mehrens, M., & Passerini, S. (2020) · Journal of Power Sources · doi:10.1016/j.jpowsour.2020.228073 · Cited by 170
Self-citationInaba, M., Siroma, Z., Funabiki, A., Ogumi, Z., Abe, T., Mizutani, Y., & Asano, M. (1996) · Langmuir · doi:10.1021/la950848e · Cited by 168
Cao, X., Xu, Y., Zhang, L., Engelhard, M. H., Zhong, L., Ren, X., Jia, H., Liu, B., Niu, C., Matthews, B. E., et al. (2019) · ACS Energy Letters · doi:10.1021/acsenergylett.9b01926 · Cited by 168
Economics and Challenges of Li-Ion Battery Recycling from End-of-Life Vehicles
Steward, D., Mayyas, A., & Mann, M. (2019) · Procedia Manufacturing · doi:10.1016/j.promfg.2019.04.033 · Cited by 167
Pranolo, Y., Zhang, W., & Cheng, C. Y. (2010) · Hydrometallurgy · doi:10.1016/j.hydromet.2010.01.007 · Cited by 166
Holzapfel, M., Jost, C., Prodi-Schwab, A., Krumeich, F., Würsig, A., Buqa, H., & Novák, P. (2005) · Carbon · doi:10.1016/j.carbon.2005.01.030 · Cited by 166
Self-citationIdentifying rate limitation and a guide to design of fast‐charging Li‐ion battery
Zhang, S. S. (2020) · InfoMat · doi:10.1002/inf2.12058 · Cited by 159
Yang, B., Zhang, H., Yu, L., Fan, W., & Huang, D. (2016) · Electrochimica Acta · doi:10.1016/j.electacta.2016.10.037 · Cited by 156
Self-citationSlot-die processing of lithium-ion battery electrodes—Coating window characterization
Schmitt, M., Baunach, M., Wengeler, L., Peters, K., Junges, P., Scharfer, P., & Schabel, W. (2012) · Chemical Engineering and Processing - Process Intensification · doi:10.1016/j.cep.2012.10.011 · Cited by 156
Manufacturing Process for Improved Ultra‐Thick Cathodes in High‐Energy Lithium‐Ion Batteries
Kremer, L. S., Hoffmann, A., Danner, T., Hein, S., Prifling, B., Westhoff, D., Dreer, C., Latz, A., Schmidt, V., & Wohlfahrt‐Mehrens, M. (2019) · Energy Technology · doi:10.1002/ente.201900167 · Cited by 152
Self-citationComparison between cylindrical and prismatic lithium-ion cell costs using a process based cost model
Ciez, R. E., & Whitacre, J. F. (2016) · Journal of Power Sources · doi:10.1016/j.jpowsour.2016.11.054 · Cited by 151
Bernhard, R., Meini, S., & Gasteiger, H. A. (2014) · Journal of The Electrochemical Society · doi:10.1149/2.013404jes · Cited by 150
Heß, M., & Novák, P. (2013) · Electrochimica Acta · doi:10.1016/j.electacta.2013.05.056 · Cited by 148
Self-citationBest Practices for Mitigating Irreversible Capacity Loss of Negative Electrodes in Li‐Ion Batteries
Aravindan, V., Lee, Y., & Srinivasan, M. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201602607 · Cited by 148
Lombardo, G., Ebin, B., Foreman, M. R. S. J., Steenari, B., & Petraniková, M. (2020) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2020.122372 · Cited by 146
Tobishima, S., Takei, K., Sakurai, Y., & Yamaki, J. (2000) · Journal of Power Sources · doi:10.1016/s0378-7753(00)00409-2 · Cited by 144
Solvent extraction fractionation of Li-ion battery leachate containing Li, Ni, and Co
Virolainen, S., Fini, M. F., Laitinen, A. T., & Sainio, T. (2017) · Separation and Purification Technology · doi:10.1016/j.seppur.2017.02.010 · Cited by 144
Bi, Y., Wang, T., Liu, M., Du, R., Yang, W., Liu, Z., Peng, Z., Liu, Y., Wang, D., & Sun, X. A. (2016) · RSC Advances · doi:10.1039/c6ra00648e · Cited by 143
The complex electrochemistry of graphite electrodes in lithium-ion batteries
Novák, P., Joho, F., Lanz, M., Rykart, B., Panitz, J., Alliata, D., Kötz, R., & Haas, O. (2001) · Journal of Power Sources · doi:10.1016/s0378-7753(01)00586-9 · Cited by 142
Self-citationYu, M., Zhang, Z., Xue, F., et al. (2019) · Separation and Purification Technology · doi:10.1016/j.seppur.2019.01.027 · Cited by 141
Li, B., Xu, M., Li, T., Li, W., & Hu, S. (2012) · Electrochemistry Communications · doi:10.1016/j.elecom.2012.02.016 · Cited by 139
Sun, Y., Myung, S., Park, B.-C., & Amine, K. (2006) · Chemistry of Materials · doi:10.1021/cm061746k · Cited by 136
Joho, F., Rykart, B., Blome, A., Novák, P., Wilhelm, H., & Spahr, M. E. (2001) · Journal of Power Sources · doi:10.1016/s0378-7753(01)00595-x · Cited by 136
Self-citationAtia, T. A., Elia, G. A., Hahn, R., Altimari, P., & Pagnanelli, F. (2019) · Journal of Energy Chemistry · doi:10.1016/j.jechem.2019.03.022 · Cited by 135
Park, S. H., Oh, S.-W., Kang, S.-H., Belharouak, I., Amine, K., & Sun, Y. (2007) · Electrochimica Acta · doi:10.1016/j.electacta.2007.05.050 · Cited by 131
Comparatively Assessing different Shapes of Lithium-ion Battery Cells
Schröder, R., Aydemir, M., & Seliger, G. (2017) · Procedia Manufacturing · doi:10.1016/j.promfg.2017.02.013 · Cited by 127
Kalhoff, J., Bresser, D., Bolloli, M., Alloin, F., Sanchez, J., & Passerini, S. (2014) · ChemSusChem · doi:10.1002/cssc.201402502 · Cited by 126
Self-citationRecovery of metals from spent lithium-ion batteries using organic acids
Demarco, J. D. O., Cadore, J. S., de Oliveira, F. D. S., Tanabe, E. H., & Bertuol, D. A. (2019) · Hydrometallurgy · doi:10.1016/j.hydromet.2019.105169 · Cited by 124
Recovery Concept of Value Metals from Automotive Lithium‐Ion Batteries
Träger, T., Friedrich, B. G., & Weyhe, R. (2015) · Chemie Ingenieur Technik · doi:10.1002/cite.201500066 · Cited by 123
Chen, D., Rao, S., Wang, D., Cao, H., Xie, W., & Liu, Z. (2020) · Chemical Engineering Journal · doi:10.1016/j.cej.2020.124321 · Cited by 123
Thermal Properties of Mixed Alkali Bis(trifluoromethylsulfonyl)amides
Hagiwara, R., Tamaki, K., Kubota, K., Goto, T., & Nohira, T. (2008) · Journal of Chemical & Engineering Data · doi:10.1021/je700368r · Cited by 121
Meyer, C., Kosfeld, M., Haselrieder, W., & Kwade, A. (2018) · Journal of Energy Storage · doi:10.1016/j.est.2018.05.018 · Cited by 121
Koyama, Y., Makimura, Y., Tanaka, I., Adachi, H., & Ohzuku, T. (2004) · Journal of The Electrochemical Society · doi:10.1149/1.1783908 · Cited by 113
Takahashi, V. C. I., Botelho, A. B., Espinosa, D. C. R., & Tenório, J. A. S. (2020) · Journal of environmental chemical engineering · doi:10.1016/j.jece.2020.103801 · Cited by 109
Zeng, Z., Liu, X., Jiang, X., Liu, Z., Peng, Z., Feng, X., Chen, W., Xia, D., Ai, X., Yang, H., et al. (2020) · InfoMat · doi:10.1002/inf2.12089 · Cited by 108
Sigala, C., VERBAERE, A., Mansot, J. L., Guyomard, D., Piffard, Y., & Tournoux, M. (1997) · Journal of Solid State Chemistry · doi:10.1006/jssc.1997.7476 · Cited by 107
Self-citationNew type of imidazole based salts designed specifically for lithium ion batteries
Niedzicki, L., Żukowska, G. Z., Bukowska, M., Szczeciński, P., Grugeon, S., Laruelle, S., Armand, M. B., Panero, S., Scrosati, B., Marcinek, M. L., et al. (2009) · Electrochimica Acta · doi:10.1016/j.electacta.2009.05.008 · Cited by 105
Self-citationProspect for Supramolecular Chemistry in High-Energy-Density Rechargeable Batteries
Kwon, T., Choi, J. W., & Coşkun, A. (2019) · Joule · doi:10.1016/j.joule.2019.01.006 · Cited by 105
Zheng, L., Zhang, H., Cheng, P., Ma, Q., Liu, J., Nie, J., Feng, W., & Zhou, Z. (2016) · Electrochimica Acta · doi:10.1016/j.electacta.2016.02.152 · Cited by 103
Self-citationOverview on the applications of three-dimensional printing for rechargeable lithium-ion batteries
Yang, Y., Yuan, W., Zhang, X., Yuan, Y., Wang, C., Ye, Y., Huang, Y., Qiu, Z., & Tang, Y. (2019) · Applied Energy · doi:10.1016/j.apenergy.2019.114002 · Cited by 103
Habedank, J. B., Kraft, L., Rheinfeld, A., Krezdorn, C., Jossen, A., & Zaeh, M. F. (2018) · Journal of The Electrochemical Society · doi:10.1149/2.1181807jes · Cited by 102
Growth Manner of Octahedral-Shaped Li(Ni1/3Co1/3Mn1/3)O2 Single Crystals in Molten Na2SO4
Kimijima, T., Zettsu, N., & Teshima, K. (2016) · Crystal Growth & Design · doi:10.1021/acs.cgd.5b01723 · Cited by 101
Martínez‐Ibáñez, M., Sánchez‐Díez, E., Qiao, L., Zhang, Y., Júdez, X., Santiago, A., Aldalur, I., Carrasco, J., Zhu, H., Forsyth, M., et al. (2020) · Advanced Functional Materials · doi:10.1002/adfm.202000455 · Cited by 99
Self-citationThe important role of additives for improved lithium ion battery safety
Park, G., Nakamura, H., Lee, Y., & Yoshio, M. (2008) · Journal of Power Sources · doi:10.1016/j.jpowsour.2008.09.088 · Cited by 98
Understanding inks for porous-electrode formation
Hatzell, K. B., Dixit, M. B., Berlinger, S. A., & Weber, A. Z. (2017) · J. Mater. Chem. A · doi:10.1039/c7ta07255d · Cited by 97
In Situ Coating of Li[Ni0.33Mn0.33Co0.33]O2 Particles to Enable Aqueous Electrode Processing
Loeffler, N., Kim, G., Mueller, F., Diemant, T., Kim, J., Behm, R. J., & Passerini, S. (2016) · ChemSusChem · doi:10.1002/cssc.201600353 · Cited by 97
Electrochemical SPM investigation of the solid electrolyte interphase film formed on HOPG electrodes
Alliata, D. (2000) · Electrochemistry Communications · doi:10.1016/s1388-2481(00)00056-4 · Cited by 96
Yao, X., Xie, S., Chen, C. H., et al. (2005) · Electrochimica Acta · doi:10.1016/j.electacta.2005.01.034 · Cited by 94
Vanpeene, V., Villanova, J., King, A., Lestriez, B., Maire, É., & Roué, L. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201803947 · Cited by 92
Self-citationBillaud, D., McRae, E., & Hérold, A. (1979) · Materials Research Bulletin · doi:10.1016/0025-5408(79)90149-1 · Cited by 90
Li, G. (1996) · Solid State Ionics · doi:10.1016/s0167-2738(96)00367-0 · Cited by 90
The importance of “going nano” for high power battery materials
Bresser, D., Paillard, E. E., Copley, M., Bishop, P. T., Winter, M., & Passerini, S. (2012) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.07.035 · Cited by 89
Self-citationKuenzel, M., Bresser, D., Diemant, T., Carvalho, D. V., Kim, G., Behm, R. J., & Passerini, S. (2017) · ChemSusChem · doi:10.1002/cssc.201702021 · Cited by 87
Self-citationAlbrecht, S., Kümpers, J., Kruft, M., Malcus, S., Vogler, C., Wahl, M., & Wohlfahrt‐Mehrens, M. (2003) · Journal of Power Sources · doi:10.1016/s0378-7753(03)00175-7 · Cited by 86
Self-citationDevelopmental toxicity of N-methyl-2-pyrrolidone administered orally to rats
Saillenfait, A., Gallissot, F., Langonné, I., & Sabaté, J. (2002) · Food and Chemical Toxicology · doi:10.1016/s0278-6915(02)00115-1 · Cited by 86
Influence of Water Contamination on the SEI Formation in Li-Ion Cells: An Operando EQCM‑D Study
Kitz, P., Novák, P., & Berg, E. J. (2020) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.0c01642 · Cited by 86
Self-citationA Safe, Low-Cost, and Sustainable Lithium-Ion Polymer Battery
Reale, P., Panero, S., Scrosati, B., Garche, J., Wohlfahrt‐Mehrens, M., & Wachtler, M. (2004) · Journal of The Electrochemical Society · doi:10.1149/1.1819790 · Cited by 84
Self-citationTran, T. D., & Kinoshita, K. (1995) · Journal of Electroanalytical Chemistry · doi:10.1016/0022-0728(95)03907-x · Cited by 81
(2016) · Elsevier eBooks · doi:10.1016/c2013-0-19081-2 · Cited by 80
Zhang, H., Feng, W., Nie, J., & Zhou, Z. (2014) · Journal of Fluorine Chemistry · doi:10.1016/j.jfluchem.2014.07.028 · Cited by 80
Self-citationRaspberry-like Nanostructured Silicon Composite Anode for High-Performance Lithium-Ion Batteries
Fang, S., Tong, Z., Nie, P., Liu, G., & Zhang, X. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b03157 · Cited by 80
Ahn, S., Kim, Y., Kim, K. J., et al. (1999) · Journal of Power Sources · doi:10.1016/s0378-7753(99)00133-0 · Cited by 77
LiPO2F2 as an Electrolyte Additive in Li[Ni0.5Mn0.3Co0.2]O2/Graphite Pouch Cells
Ma, L., Ellis, L., Glazier, S. L., Ma, X.-W., Liu, Q.-Q., Li, J., & Dahn, J. (2018) · Journal of The Electrochemical Society · doi:10.1149/2.0381805jes · Cited by 74
Life cycle impact assessment of electric vehicle battery charging in European Union countries
Burchart-Korol, D., Jursová, S., FOLĘGA, P., & Pustějovská, P. (2020) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2020.120476 · Cited by 74
Kazzazi, A., Bresser, D., Birrozzi, A., von Zamory, J., Hekmatfar, M., & Passerini, S. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b03657 · Cited by 72
Self-citationRole of impurity copper in Li-ion battery recycling to LiCoO2 cathode materials
Peng, C. Q., Lahtinen, K., Medina, E. A., Kauranen, P., Karppinen, M. J., Kallio, T. M., Wilson, B. P., & Lundström, M. (2019) · Journal of Power Sources · doi:10.1016/j.jpowsour.2019.227630 · Cited by 71
Taiwo, O. O., Paz-García, J. M., Hall, S. A., Heenan, T. M. M., Finegan, D. P., Mokso, R., Villanueva‐Perez, P., Patera, A., Brett, D. J. L., & Shearing, P. R. (2017) · Journal of Power Sources · doi:10.1016/j.jpowsour.2016.12.070 · Cited by 70
Kuenzel, M., Kim, G., Zarrabeitia, M., Lin, S. D., Schür, A. R., Geiger, D., Kaiser, U. A., Bresser, D., & Passerini, S. (2020) · Materials Today · doi:10.1016/j.mattod.2020.04.003 · Cited by 66
Self-citationHan, H.-B., Guo, J., Zhang, D., Feng, S., Feng, W., Nie, J., & Zhou, Z. (2011) · Electrochemistry Communications · doi:10.1016/j.elecom.2010.12.030 · Cited by 64
Film Formation at Positive Electrodes in Lithium-Ion Batteries
Würsig, A., Buqa, H., Holzapfel, M., Krumeich, F., & Novák, P. (2004) · Electrochemical and Solid-State Letters · doi:10.1149/1.1836114 · Cited by 64
Self-citationJia, H. N., Onishi, H., von Aspern, N., et al. (2018) · Journal of Power Sources · doi:10.1016/j.jpowsour.2018.07.039 · Cited by 63
Extrusion-based fabrication of electrodes for high-energy Li-ion batteries
Seeba, J., Reuber, S., Heubner, C., Müller-Köhn, A., Wolter, M., & Michaelis, A. (2020) · Chemical Engineering Journal · doi:10.1016/j.cej.2020.125551 · Cited by 63
Effects of the LiPO2F2 additive on unwanted lithium plating in lithium-ion cells
Liu, Q.-Q., Ma, L., Du, C.-Y., & Dahn, J. (2018) · Electrochimica Acta · doi:10.1016/j.electacta.2018.01.058 · Cited by 62
Porvali, A., Chernyaev, A., Shukla, S., & Lundström, M. (2019) · Separation and Purification Technology · doi:10.1016/j.seppur.2019.116305 · Cited by 61
Wang, D. Y., Xiao, A., Wells, L., & Dahn, J. R. (2014) · Journal of The Electrochemical Society · doi:10.1149/2.0821501jes · Cited by 60
Kerr, R., Mazouzi, D., Eftekharnia, M., Lestriez, B., Dupré, N., Forsyth, M., Guyomard, D., & Howlett, P. C. (2017) · ACS Energy Letters · doi:10.1021/acsenergylett.7b00403 · Cited by 60
Self-citationKey factors for the cycling stability of graphite intercalation electrodes for lithium-ion batteries
Joho, F., Rykart, B., Imhof, R., Novák, P., Spahr, M. E., & Monnier, A. (1999) · Journal of Power Sources · doi:10.1016/s0378-7753(99)00195-0 · Cited by 59
Self-citationWesthoff, D., Manke, I., & Schmidt, V. (2018) · Computational Materials Science · doi:10.1016/j.commatsci.2018.04.060 · Cited by 58
Spahr, M. E., Wilhelm, H., Joho, F., Panitz, J., Wambach, J., Novák, P., & Dupont-Pavlovsky, N. (2002) · Journal of The Electrochemical Society · doi:10.1149/1.1486238 · Cited by 56
Self-citationSafety of large-capacity lithium-ion battery and evaluation of battery system for telecommunications
Tsujikawa, T., Yabuta, K., Arakawa, M., & Hayashi, K. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.01.155 · Cited by 56
Ma, L., Ellis, L. D., Glazier, S., Ma, X., & Dahn, J. R. (2018) · Journal of The Electrochemical Society · doi:10.1149/2.0661809jes · Cited by 55
The Effect of Volume Change on the Accessible Capacities of Porous Silicon-Graphite Composite Anodes
Pereira, D. J., Weidner, J. W., & Garrick, T. R. (2019) · Journal of The Electrochemical Society · doi:10.1149/2.1211906jes · Cited by 55
An extended homogenized porous electrode model for lithium-ion cell electrodes
Ender, M. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2015.02.098 · Cited by 53
Hydrometallurgical Processes for the Recovery of Metals from WEEE
Tunsu, C., & Retegan, T. (2016) · Elsevier eBooks · doi:10.1016/b978-0-12-803363-0.00006-7 · Cited by 51
Goers, D., Spahr, M. E., Leone, A., Märkle, W., & Novák, P. (2011) · Electrochimica Acta · doi:10.1016/j.electacta.2011.02.046 · Cited by 49
Self-citationThe challenges, solutions and development of high energy Ni-rich NCM/NCA LiB cathode materials
Chen, Y., Shun-lin, S., Zhang, X., & Liu, Y. (2019) · Journal of Physics Conference Series · doi:10.1088/1742-6596/1347/1/012012 · Cited by 48
Spahr, M. E., Wilhelm, H., Palladino, T., Dupont-Pavlovsky, N., Goers, D., Joho, F., & Novák, P. (2003) · Journal of Power Sources · doi:10.1016/s0378-7753(03)00284-2 · Cited by 46
Self-citationThe Role of Carbonate Solvents on Lithium Intercalation into Graphite
Gnanaraj, J., Thompson, R. W., DiCarlo, J., & Abraham, K. M. (2007) · Journal of The Electrochemical Society · doi:10.1149/1.2424419 · Cited by 44
Jiang, X., Chu, S., Chen, Y., Zhong, Y., Liu, Y., & Shao, Z. (2016) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2016.08.139 · Cited by 44
Advances in In Situ Techniques for Characterization of Failure Mechanisms of Li‐Ion Battery Anodes
Hapuarachchi, S. N. S., Sun, Z., & Yan, C. (2018) · Advanced Sustainable Systems · doi:10.1002/adsu.201700182 · Cited by 40
Vasilyev, F., Virolainen, S., & Sainio, T. (2018) · Separation and Purification Technology · doi:10.1016/j.seppur.2018.08.036 · Cited by 40
Scaling up “Nano” Li4Ti5O12for High-Power Lithium-Ion Anodes Using Large Scale Flame Spray Pyrolysis
Birrozzi, A., Copley, M., von Zamory, J., Pasqualini, M., Calcaterra, S., Nobili, F., Cicco, A. D., Rajantie, H., Briceno, M., Bilbé, E., et al. (2015) · Journal of The Electrochemical Society · doi:10.1149/2.0711512jes · Cited by 39
Self-citationVanaphuti, P., Bong, S., Ma, L., Ehrlich, S. N., & Wang, Y. (2020) · ACS Applied Energy Materials · doi:10.1021/acsaem.0c00439 · Cited by 39
Zhang, H., Han, H., Cheng, X.-R., Zheng, L.-P., Cheng, P.-F., Feng, W.-F., Nie, J., Armand, M., Huang, X.-J., & Zhou, Z.-B. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2015.07.026 · Cited by 38
Self-citationTheoretical optimization of electrode design parameters of Si based anodes for lithium-ion batteries
Heubner, C., Langklotz, U., & Michaelis, A. (2017) · Journal of Energy Storage · doi:10.1016/j.est.2017.11.009 · Cited by 35
Improving the High-Temperature Resilience of LiMn2O4Based Batteries: LiFNFSI an Effective Salt
Zhou, S., Han, H.-B., Nie, J., Armand, M. B., Zhou, Z., & Huang, X. (2012) · Journal of The Electrochemical Society · doi:10.1149/2.026208jes · Cited by 33
Self-citationCarbon Materials in Lithium-Ion Batteries
Novák, P., Goers, D., & Spahr, M. E. (2009) · Advanced materials and technologies series/Advanced materials and technologies · doi:10.1201/9781420055405-c7 · Cited by 32
Self-citationÖrnek, A., Bulut, E., & Can, M. (2015) · Materials Characterization · doi:10.1016/j.matchar.2015.05.029 · Cited by 31
Fredj, E. B., Rousselot, S., Danis, L., Bibienne, T., Gauthier, M., Liang, G., & Dollé, M. (2019) · Journal of Energy Storage · doi:10.1016/j.est.2019.101116 · Cited by 31
Bolivia and Paraguay: A beacon for sustainable electric mobility?
Sauer, I. L., Escobar, J. F., da Silva, M. F. P., Meza, C. G., Centurion, C., & Goldemberg, J. (2015) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2015.06.038 · Cited by 28
Müller, V., Bernhard, R., Wegener, J., Pfeiffer, J., Rößler, S., Scurtu, R., Memm, M., Danzer, M. A., & Wohlfahrt‐Mehrens, M. (2020) · Energy Technology · doi:10.1002/ente.202000217 · Cited by 23
Self-citationBograchev, D. A., Volfkovich, Y. M., Sosenkin, V. E., Podgornova, O., & Kosova, N. V. (2020) · Energies · doi:10.3390/en13030542 · Cited by 21
Tesemma, M., Wang, F., Haregewoin, A. M., Hamidah, N. L., Hendra, P. M., Lin, S. D., Chern, C., Pham, Q., & Su, C. (2019) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.8b05635 · Cited by 20
High Energy Li‐Ion Electrodes Prepared via a Solventless Melt Process
Astafyeva, K., Dousset, C., Bureau, Y., Stalmach, S., & Dufour, B. (2020) · Batteries & Supercaps · doi:10.1002/batt.201900187 · Cited by 19
Novel alkyl methyl carbonate solvents for lithium-ion batteries
Vetter, J., & Novák, P. (2003) · Journal of Power Sources · doi:10.1016/s0378-7753(03)00151-4 · Cited by 18
Self-citationExpansion of mesocarbon microbeads
Yang, S., Song, H., & Chen, X. (2005) · Carbon · doi:10.1016/j.carbon.2005.09.019 · Cited by 17
Loeffler, N., Kim, G., Passerini, S., Gutiérrez, C., Cendoya, I., de Meatza, I., Alessandrini, F., & Appetecchi, G. (2017) · ChemSusChem · doi:10.1002/cssc.201701087 · Cited by 13
The Role of Batteries for the Successful Transition to Renewable Energy Sources
Bresser, D., Moretti, A., Varzi, A., & Passerini, S. (2020) · Wiley eBooks · doi:10.1002/9783527610426.bard110024 · Cited by 11
Self-citation
Cited by
Li, J., Fleetwood, J., Hawley, W. B., & Kays, W. (2022) · Chemical Reviews · doi:10.1021/acs.chemrev.1c00565 · Cited by 895
Neumann, J., Petranikova, M., Meeus, M., Gamarra, J. D., Younesi, R., Winter, M., & Nowak, S. (2022) · Advanced Energy Materials · doi:10.1002/aenm.202102917 · Cited by 805
Lithium-Ion Battery Recycling─Overview of Techniques and Trends
Baum, Z. J., Bird, R. E., Yu, X., & Ma, J. (2022) · ACS Energy Letters · doi:10.1021/acsenergylett.1c02602 · Cited by 747
A reflection on polymer electrolytes for solid-state lithium metal batteries
Song, Z., Chen, F., Martinez-Ibañez, M., Feng, W., Forsyth, M., Zhou, Z., Armand, M., & Zhang, H. (2023) · Nature Communications · doi:10.1038/s41467-023-40609-y · Cited by 422
Self-citationMartins, L. S., Guimarães, L. F., Botelho Junior, A. B., Tenório, J. A. S., & Espinosa, D. C. R. (2021) · Journal of Environmental Management · doi:10.1016/j.jenvman.2021.113091 · Cited by 361
Metadata
- Authors
- Armand, M., Axmann, P., Bresser, D., Copley, M., Edström, K., Ekberg, C., Guyomard, D., Lestriez, B., Novák, P., Petranikova, M., Porcher, W., Trabesinger, S., Wohlfahrt-Mehrens, M., & Zhang, H.
- Venue
- Journal of Power Sources
- Publisher
- Elsevier BV
- Published
- 2020-12
- Volume
- 479
- Pages
- 228708
- ISSN
- 0378-7753 (ISSN-L)
- OpenAlex
- W3086341487
- Cited by
- 888
- References
- 312
- FWCI
- 32.66
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.