The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Improving 3D printing process of lemon juice gel based on fluid flow numerical simulation
Abstract
Food 3D printing has received attention as a novel field in recent years, bringing new ideas and opportunities for the development and transformation of food processing technology. This work investigated the moisture and rheological properties of lemon juice gels with different starches by experimental studies and simulated the effect of different material properties and process parameters (material viscosity and relaxation time, inlet volume flow rate and nozzle diameter) on the velocity, shear rate and pressure fields in the flow channel by the POLYFLOW software. Results showed that with the addition of different kinds of starches, the viscosity and mechanical properties of the lemon juice gel were varied. Adding potato starch altered fluidity with different relative degree of bound or immobilized water of lemon juice gel. According to the simulation study, in the same shape of the flow path, the velocity and shear velocity fields were determined by the inlet volume flow rate. The change of different process parameters was found to cause changes in pressure field in the flow channel to varying degrees, and the change of the nozzle diameter had the greatest influence on the pressure distribution. In addition, the extruded material exhibited swelling phenomenon.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
3D printing: Printing precision and application in food sector
Liu, Z., Zhang, M., Bhandari, B., & Wang, Y. (2017) · Trends in Food Science & Technology · doi:10.1016/j.tifs.2017.08.018 · Cited by 858
Self-citationDerossi, A., Caporizzi, R., Azzollini, D., & Severini, C. (2018) · Journal of Food Engineering · doi:10.1016/j.jfoodeng.2017.05.015 · Cited by 399
Cited by
Self-Healing Injectable Hydrogels for Tissue Regeneration
Bertsch, P., Diba, M., Mooney, D. J., & Leeuwenburgh, S. C. G. (2023) · Chemical Reviews · doi:10.1021/acs.chemrev.2c00179 · Cited by 892
Applications of 3D Printing in Food Processing
Nachal, N., Moses, J. A., Karthik, P., & Anandharamakrishnan, C. (2019) · Food Engineering Reviews · doi:10.1007/s12393-019-09199-8 · Cited by 359
Extrusion-based additive manufacturing technologies: State of the art and future perspectives
Altıparmak, S. C., Yardley, V. A., Shi, Z., & Lin, J. (2022) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2022.09.032 · Cited by 320
Recent advances and future perspective in additive manufacturing of foods based on 3D printing
Le-Bail, A., Maniglia, B. C., & Le-Bail, P. (2020) · Current Opinion in Food Science · doi:10.1016/j.cofs.2020.01.009 · Cited by 229
3D food printing: a categorised review of inks and their development
Voon, S. L., An, J., Wong, G., Zhang, Y., & Chua, C. K. (2019) · Virtual and Physical Prototyping · doi:10.1080/17452759.2019.1603508 · Cited by 175
Metadata
- Authors
- Yang, F., Guo, C., Zhang, M., Bhandari, B., & Liu, Y.
- Venue
- LWT
- Publisher
- Elsevier BV
- Published
- 2019-03
- Volume
- 102
- Pages
- 89-99
- ISSN
- 0023-6438 (ISSN-L)
- OpenAlex
- W2904211079
- Cited by
- 172
- References
- 2
- FWCI
- 7.88
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.