Combinational processing of 3D printing and electrospinning of hierarchical poly(lactic acid)/gelatin-forsterite scaffolds as a biocomposite: Mechanical and biological assessment
Open accessThe DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Abstract
In this research, hierarchical scaffolds including poly(lactic acid) (PLA) micro struts and nanocomposite gelatin-forsterite fibrous layers were developed using fused deposition modeling (FDM) and electrospinning (ES), respectively. Briefly, geometrically various groups of pure PLA scaffolds (interconnected pores of 230 to 390 μm) were fabricated using FDM technique. After mechanical evaluation, ES technique was utilized to develop gelatin-forsterite nanofibrous layer. To study these scaffolds, scanning electron microscopy (SEM), Fourier transform infrared spectroscopy, and uniaxial compression tests were performed. Furthermore, bioactivity of the scaffolds was evaluated by immersing in the simulated body fluid and apatite formation on the surface of the scaffolds was investigated. Results depicted that elastic modulus of PLA/gelatin-forsterite scaffolds, fabricated by a combinational approach, was significantly higher than that of pure one (about 52%). SEM images showed the formation of calcium phosphate-like precipitates on the surface of these scaffolds, confirming the effects of nanocomposite fibrous layer on the improved bioactivity of the scaffolds. Regarding the obtained biological as well as mechanical properties, the developed bio-composite scaffolds can be used as a biocompatible candidate for bone tissue regeneration.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Murariu, M., Dechief, A.-L., Ramy-Ratiarison, R., Paint, Y., Raquez, J.-M., & Dubois, P. (2015) · Nanocomposites · doi:10.1179/2055033214y.0000000008 · Cited by 85
Cited by
Extrusion-Based 3D Printing Applications of PLA Composites: A Review
Tümer, E. H., & Erbil, H. Y. (2021) · Coatings · doi:10.3390/coatings11040390 · Cited by 454
Askari, M., Afzali Naniz, M., Kouhi, M., Saberi, A., Zolfagharian, A., & Bodaghi, M. (2021) · Biomaterials Science · doi:10.1039/d0bm00973c · Cited by 369
The role of additive manufacturing for biomedical applications: A critical review
Kumar, R., Kumar, M., & Chohan, J. S. (2021) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2021.02.022 · Cited by 367
Recent advances in PLGA-based biomaterials for bone tissue regeneration
Jin, S., Xia, X., Huang, J., Yuan, C., Zuo, Y., Li, Y., & Li, J. (2021) · Acta Biomaterialia · doi:10.1016/j.actbio.2021.03.067 · Cited by 295
Keirouz, A., Chung, M., Kwon, J., Fortunato, G., & Radacsi, N. (2020) · WIREs Nanomedicine and Nanobiotechnology · doi:10.1002/wnan.1626 · Cited by 277
3D printing for membrane separation, desalination and water treatment
Tijing, L. D., Dizon, J. R. C., Ibrahim, I., Nisay, A. R. N., Shon, H. K., & Advincula, R. C. (2020) · Applied Materials Today · doi:10.1016/j.apmt.2019.100486 · Cited by 269
3D Printing and Electrospinning of Composite Hydrogels for Cartilage and Bone Tissue Engineering
De Mori, A., Peña Fernández, M., Blunn, G., Tozzi, G., & Roldo, M. (2018) · Polymers · doi:10.3390/polym10030285 · Cited by 206
“fabricated scaffolds with alternating layers of 3D printed PLA mesh and gelatin/forsterite electrospun fibres [162].”
MethodStrategic Design and Fabrication of Nerve Guidance Conduits for Peripheral Nerve Regeneration
Sarker, M., Naghieh, S., McInnes, A. D., Schreyer, D. J., & Chen, X. (2018) · Biotechnology Journal · doi:10.1002/biot.201700635 · Cited by 178
Self-citation3D bioprinting of skin tissue: From pre-processing to final product evaluation
Yan, W.-C., Davoodi, P., Vijayavenkataraman, S., Tian, Y., Ng, W. C., Fuh, J. Y. H., Robinson, K. S., & Wang, C.-H. (2018) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2018.07.016 · Cited by 171
Three-dimensional printed electrospun fiber-based scaffold for cartilage regeneration
Chen, W., Xu, Y., Liu, Y., Wang, Z., Li, Y., Jiang, G., Mo, X., & Zhou, G. (2019) · Materials & Design · doi:10.1016/j.matdes.2019.107886 · Cited by 136
Natural polymer-based scaffolds for soft tissue repair
Chen, M., Jiang, R., Deng, N., Zhao, X., Li, X., & Guo, C. (2022) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2022.954699 · Cited by 57
“Compared with synthetic polymers, natural polymers such as collagen, fibrin, silk protein, chitosan, and hyaluronic acid generally present better biocompatibility but limited processability (Naghieh et al., 2017; Caillol, 2020; Taghipour et al., 2020).”
Background
Metadata
- Authors
- Naghieh, S., Foroozmehr, E., Badrossamay, M., & Kharaziha, M.
- Venue
- Materials & Design
- Publisher
- Elsevier BV
- Published
- 2017-11
- Volume
- 133
- Pages
- 128-135
- ISSN
- 0264-1275 (ISSN-L)
- OpenAlex
- W2737639648
- Cited by
- 128
- References
- 1
- FWCI
- 5.70
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.