Recent progress in extrusion 3D bioprinting of hydrogel biomaterials for tissue regeneration: a comprehensive review with focus on advanced fabrication techniques

3D bioprinting of tissues and organs

Murphy, S. V., & Atala, A. (2014) · Nature Biotechnology · doi:10.1038/nbt.2958 · Cited by 7,034 · see citing works

Porous scaffold design for tissue engineering

Hollister, S. J. (2005) · Nature Materials · doi:10.1038/nmat1421 · Cited by 3,979 · see citing works

The Basic Science of Articular Cartilage: Structure, Composition, and Function

Fox, A. J. S., Bedi, A., & Rodeo, S. A. (2009) · Sports Health A Multidisciplinary Approach · doi:10.1177/1941738109350438 · Cited by 2,785 · see citing works

Biomedical applications of hydrogels: A review of patents and commercial products

Caló, E., & Khutoryanskiy, V. V. (2015) · European Polymer Journal · doi:10.1016/j.eurpolymj.2014.11.024 · Cited by 2,634 · see citing works

A 3D bioprinting system to produce human-scale tissue constructs with structural integrity

Kang, H.-W., Lee, S. J., Ko, I. K., Kengla, C., Yoo, J. J., & Atala, A. (2016) · Nature Biotechnology · doi:10.1038/nbt.3413 · Cited by 2,622 · see citing works

3D bioprinting of vascularized, heterogeneous cell-laden tissue constructs

Kolesky, D. B., Truby, R. L., Gladman, A. S., Busbee, T. A., Homan, K. A., & Lewis, J. A. (2014) · Advanced Materials · doi:10.1002/adma.201305506 · Cited by 2,102 · see citing works

Printing three-dimensional tissue analogues with decellularized extracellular matrix bioink

Pati, F., Jang, J., Ha, D.-H., Won Kim, S., Rhie, J.-W., Shim, J.-H., Kim, D.-H., & Cho, D.-W. (2014) · Nature Communications · doi:10.1038/ncomms4935 · Cited by 1,904 · see citing works

Left Ventricular Remodeling After Myocardial Infarction

Sutton, M. G. S. J., & Sharpe, N. (2000) · Circulation · doi:10.1161/01.cir.101.25.2981 · Cited by 1,827 · see citing works

Three-dimensional printing of complex biological structures by freeform reversible embedding of suspended hydrogels

Hinton, T. J., Jallerat, Q., Palchesko, R. N., Park, J. H., Grodzicki, M. S., Shue, H.-J., Ramadan, M. H., Hudson, A. R., & Feinberg, A. W. (2015) · Science Advances · doi:10.1126/sciadv.1500758 · Cited by 1,805 · see citing works

3D bioprinting of collagen to rebuild components of the human heart

Lee, A., Hudson, A. R., Shiwarski, D. J., Tashman, J. W., Hinton, T. J., Yerneni, S., Bliley, J. M., Campbell, P. G., & Feinberg, A. W. (2019) · Science · doi:10.1126/science.aav9051 · Cited by 1,782 · see citing works

Extracellular matrix as a biological scaffold material: Structure and function

BADYLAK, S., FREYTES, D., & GILBERT, T. (2009) · Acta Biomaterialia · doi:10.1016/j.actbio.2008.09.013 · Cited by 1,671 · see citing works

Current advances and future perspectives in extrusion-based bioprinting

Ozbolat, I. T., & Hospodiuk, M. (2015) · Biomaterials · doi:10.1016/j.biomaterials.2015.10.076 · Cited by 1,593 · see citing works

3D Bioprinting Human Chondrocytes with Nanocellulose–Alginate Bioink for Cartilage Tissue Engineering Applications

Markstedt, K., Mantas, A., Tournier, I., Martínez Ávila, H., Hägg, D., & Gatenholm, P. (2015) · Biomacromolecules · doi:10.1021/acs.biomac.5b00188 · Cited by 1,528 · see citing works

Three-dimensional bioprinting of thick vascularized tissues

Kolesky, D. B., Homan, K. A., Skylar-Scott, M. A., & Lewis, J. A. (2016) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1521342113 · Cited by 1,492 · see citing works

Bioinks for 3D bioprinting: an overview

Gungor‐Ozkerim, P. S., İnci, İ., Zhang, Y. S., Khademhosseini, A., & Dokmeci, M. R. (2018) · Biomaterials Science · doi:10.1039/c7bm00765e · Cited by 1,441 · see citing works

Growth factor delivery-based tissue engineering: general approaches and a review of recent developments

Lee, K., Silva, E. A., & Mooney, D. J. (2010) · Journal of The Royal Society Interface · doi:10.1098/rsif.2010.0223 · Cited by 1,391 · see citing works

Reprint of: Extracellular matrix as a biological scaffold material: Structure and function

Badylak, S. F., Freytes, D. O., & Gilbert, T. W. (2015) · Acta Biomaterialia · doi:10.1016/j.actbio.2015.07.016 · Cited by 1,361 · see citing works

Scaffold-free vascular tissue engineering using bioprinting

Norotte, C., Marga, F., Niklason, L. E., & Forgács, G. (2009) · Biomaterials · doi:10.1016/j.biomaterials.2009.06.034 · Cited by 1,342 · see citing works

3D bioactive composite scaffolds for bone tissue engineering

Turnbull, G. S., Clarke, J., Picard, F., Riches, P. E., Jia, L., Han, F., Li, B., & Shu, W. (2017) · Bioactive Materials · doi:10.1016/j.bioactmat.2017.10.001 · Cited by 1,337 · see citing works

Progress in 3D bioprinting technology for tissue/organ regenerative engineering

Matai, I., Kaur, G., Seyedsalehi, A., McClinton, A., & Laurencin, C. T. (2020) · Biomaterials · doi:10.1016/j.biomaterials.2019.119536 · Cited by 1,156 · see citing works

Ultralight nanofibre-assembled cellular aerogels with superelasticity and multifunctionality

Si, Y., Yu, J., Tang, X., Ge, J., & Ding, B. (2014) · Nature Communications · doi:10.1038/ncomms6802 · Cited by 1,155 · see citing works

Progress and opportunities for tissue-engineered skin

MacNeil, S. (2007) · Nature · doi:10.1038/nature05664 · Cited by 1,114 · see citing works

3D Printing of Personalized Thick and Perfusable Cardiac Patches and Hearts

Noor, N., Shapira, A., Edri, R., Gal, I., Wertheim, L., & Dvir, T. (2019) · Advanced Science · doi:10.1002/advs.201900344 · Cited by 1,042 · see citing works

Voxelated soft matter via multimaterial multinozzle 3D printing

Skylar‐Scott, M. A., Mueller, J., Visser, C. W., & Lewis, J. A. (2019) · Nature · doi:10.1038/s41586-019-1736-8 · Cited by 1,031 · see citing works

The 3D printing of gelatin methacrylamide cell-laden tissue-engineered constructs with high cell viability

Billiet, T., Gevaert, E., De Schryver, T., Cornelissen, M., & Dubruel, P. (2014) · Biomaterials · doi:10.1016/j.biomaterials.2013.09.078 · Cited by 1,015 · see citing works

3D Bioprinting of heterogeneous aortic valve conduits with alginate/gelatin hydrogels

Duan, B., Hockaday, L. A., Kang, K. H., & Butcher, J. T. (2012) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.34420 · Cited by 1,005 · see citing works

Engineered heart tissue grafts improve systolic and diastolic function in infarcted rat hearts

Zimmermann, W., Melnychenko, I., Wasmeier, G. H., Didié, M., Naito, H., Nixdorff, U., Heß, A., Budinský, L., Brune, K., Michaelis, B., et al. (2006) · Nature Medicine · doi:10.1038/nm1394 · Cited by 996 · see citing works

Bioprinting 3D microfibrous scaffolds for engineering endothelialized myocardium and heart-on-a-chip

Zhang, Y. S., Arneri, A., Bersini, S., Shin, S.-R., Zhu, K., Goli-Malekabadi, Z., Aleman, J., Colosi, C., Busignani, F., Dell’Erba, V., et al. (2016) · Biomaterials · doi:10.1016/j.biomaterials.2016.09.003 · Cited by 957 · see citing works

3D Printing of Scaffolds for Tissue Regeneration Applications

Do, A., Khorsand, B., Geary, S. M., & Salem, A. K. (2015) · Advanced Healthcare Materials · doi:10.1002/adhm.201500168 · Cited by 949 · see citing works

Hydrogel bioprinted microchannel networks for vascularization of tissue engineering constructs

Bertassoni, L. E., Cecconi, M., Manoharan, V., Nikkhah, M., Hjortnaes, J., Cristino, A. L., Barabaschi, G., Demarchi, D., Dokmeci, M. R., Yang, Y., et al. (2014) · Lab Chip · doi:10.1039/c4lc00030g · Cited by 944 · see citing works

Direct 3D bioprinting of perfusable vascular constructs using a blend bioink

Jia, W., Gungor-Ozkerim, P. S., Zhang, Y. S., Yue, K., Zhu, K., Liu, W., Pi, Q., Byambaa, B., Dokmeci, M. R., Shin, S. R., et al. (2016) · Biomaterials · doi:10.1016/j.biomaterials.2016.07.038 · Cited by 922 · see citing works

3D printing of hydrogels: Rational design strategies and emerging biomedical applications

Li, J., Wu, C., Chu, P. K.-H., & Gelinsky, M. (2020) · Materials Science and Engineering R Reports · doi:10.1016/j.mser.2020.100543 · Cited by 867 · see citing works

Microfluidic Bioprinting of Heterogeneous 3D Tissue Constructs Using Low‐Viscosity Bioink

Colosi, C., Shin, S. R., Manoharan, V., Massa, S., Costantini, M., Barbetta, A., Dokmeci, M. R., Dentini, M., & Khademhosseini, A. (2016) · Advanced Materials · doi:10.1002/adma.201503310 · Cited by 863 · see citing works

Smart Hydrogels in Tissue Engineering and Regenerative Medicine

Mantha, S., Pillai, S., Khayambashi, P., Upadhyay, A., Zhang, Y., Tao, O., Pham, H. M., & Tran, S. D. (2019) · Materials · doi:10.3390/ma12203323 · Cited by 863 · see citing works

Comparison of Treatment Effects between Animal Experiments and Clinical Trials: Systematic Review

Perel, P., Roberts, I., Sena, E., Wheble, P., Briscoe, C., Sandercock, P., Macleod, M., Mignini, L. E., Jayaram, P., & Khan, K. S. (2007) · BMJ · doi:10.1136/bmj.39048.407928.be · Cited by 827 · see citing works

Small functional groups for controlled differentiation of hydrogel-encapsulated human mesenchymal stem cells

Benoit, D. S. W., Schwartz, M. P., Durney, A. R., & Anseth, K. S. (2008) · Nature Materials · doi:10.1038/nmat2269 · Cited by 825 · see citing works

Chondrogenic differentiation of adipose-derived adult stem cells in agarose, alginate, and gelatin scaffolds

Awad, H. A., Wickham, M. Q., Leddy, H. A., Gimble, J. M., & Guilak, F. (2003) · Biomaterials · doi:10.1016/j.biomaterials.2003.10.045 · Cited by 794 · see citing works

Gelatin‐Methacrylamide Hydrogels as Potential Biomaterials for Fabrication of Tissue‐Engineered Cartilage Constructs

Schuurman, W., Levett, P. A., Pot, M. W., van Weeren, P. R., Dhert, W. J. A., Hutmacher, D. W., Melchels, F. P. W., Klein, T. J., & Malda, J. (2013) · Macromolecular Bioscience · doi:10.1002/mabi.201200471 · Cited by 791 · see citing works

Designing Biomaterials for 3D Printing

Güvendiren, M., Molde, J., Soares, R. M. D., & Kohn, J. (2016) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.6b00121 · Cited by 737 · see citing works

A review of tissue-engineered skin bioconstructs available for skin reconstruction

Shevchenko, R. V., James, S. L., & James, S. E. (2009) · Journal of The Royal Society Interface · doi:10.1098/rsif.2009.0403 · Cited by 736 · see citing works

Design and Fabrication of Human Skin by Three-Dimensional Bioprinting

Lee, V., Singh, G., Trasatti, J. P., Bjornsson, C. S., Xu, X., Tran, T. N., Yoo, S., Dai, G., & Karande, P. (2013) · Tissue Engineering Part C Methods · doi:10.1089/ten.tec.2013.0335 · Cited by 728 · see citing works

4D Bioprinting for Biomedical Applications

Gao, B., Yang, Q., Zhao, X., Jin, G., Ma, Y., & Xu, F. (2016) · Trends in biotechnology · doi:10.1016/j.tibtech.2016.03.004 · Cited by 713 · see citing works

3D Bioprinting for Tissue and Organ Fabrication

Zhang, Y. S., Yue, K., Aleman, J., Mollazadeh‐Moghaddam, K., Bakht, S. M., Yang, J., Jia, W., Dell’Erba, V., Assawes, P., Shin, S. R., et al. (2016) · Annals of Biomedical Engineering · doi:10.1007/s10439-016-1612-8 · Cited by 695 · see citing works

3D printed complex tissue construct using stem cell-laden decellularized extracellular matrix bioinks for cardiac repair

Jang, J., Park, H.-J., Kim, S.-W., Kim, H., Park, J. Y., Na, S. J., Kim, H. J., Park, M. N., Choi, S. H., Park, S. H., et al. (2017) · Biomaterials · doi:10.1016/j.biomaterials.2016.10.026 · Cited by 673 · see citing works

Bioprinted Amniotic Fluid-Derived Stem Cells Accelerate Healing of Large Skin Wounds

Skardal, A., Mack, D. L., Kapetanovic, E., Atala, A., Jackson, J. D., Yoo, J. J., & Söker, S. (2012) · Stem Cells Translational Medicine · doi:10.5966/sctm.2012-0088 · Cited by 663 · see citing works

3D printing of bone tissue engineering scaffolds

Wang, C., Huang, W., Zhou, Y., He, L., He, Z., Chen, Z., He, X., Tian, S., Liao, J., Lu, B., et al. (2020) · Bioactive Materials · doi:10.1016/j.bioactmat.2020.01.004 · Cited by 661 · see citing works

Direct-write bioprinting of cell-laden methacrylated gelatin hydrogels

Bertassoni, L. E., Cardoso, J. C., Manoharan, V., Cristino, A. L., Bhise, N. S., Araujo, W. A., Zorlutuna, P., Vrana, N. E., Ghaemmaghami, A. M., Dokmeci, M. R., et al. (2014) · Biofabrication · doi:10.1088/1758-5082/6/2/024105 · Cited by 642 · see citing works

Coaxial nozzle-assisted 3D bioprinting with built-in microchannels for nutrients delivery

Gao, Q., He, Y., Fu, J., Liu, A., & Ma, L. (2015) · Biomaterials · doi:10.1016/j.biomaterials.2015.05.031 · Cited by 633 · see citing works

Hybrid printing of mechanically and biologically improved constructs for cartilage tissue engineering applications

Xu, T., Binder, K. W., Albanna, M. Z., Dice, D. D., Zhao, W., Yoo, J. J., & Atala, A. (2012) · Biofabrication · doi:10.1088/1758-5082/5/1/015001 · Cited by 633 · see citing works

Composition and Structure of Articular Cartilage

Poole, A. R., Kojima, T., Yasuda, T., Mwale, F., Kobayashi, M., & Laverty, S. (2001) · Clinical Orthopaedics and Related Research · doi:10.1097/00003086-200110001-00004 · Cited by 632 · see citing works

Cell Mechanics: Integrating Cell Responses to Mechanical Stimuli

Janmey, P. A., & McCulloch, C. A. (2007) · Annual Review of Biomedical Engineering · doi:10.1146/annurev.bioeng.9.060906.151927 · Cited by 631 · see citing works

Volumetric Bioprinting of Complex Living‐Tissue Constructs within Seconds

Bernal, P. N., Delrot, P., Loterie, D., Li, Y., Malda, J., Moser, C., & Levato, R. (2019) · Advanced Materials · doi:10.1002/adma.201904209 · Cited by 618 · see citing works

Scaffold Techniques and Designs in Tissue Engineering Functions and Purposes: A Review

Eltom, A., Zhong, G., & Ameen, M. (2019) · Advances in Materials Science and Engineering · doi:10.1155/2019/3429527 · Cited by 617 · see citing works

Bio-ink properties and printability for extrusion printing living cells

Chung, J. H.-Y., Naficy, S., Yue, Z., Kapsa, R. M. I., Quigley, A. F., Moulton, S. E., & Wallace, G. G. (2013) · Biomaterials Science · doi:10.1039/c3bm00012e · Cited by 612 · see citing works

Animal models of human disease: challenges in enabling translation

McGonigle, P., & Ruggeri, B. (2014) · Biochemical Pharmacology · doi:10.1016/j.bcp.2013.08.006 · Cited by 610 · see citing works

Anatomy and Physiology of the Skin

Kolarsick, P. A. J., Kolarsick, M. A., & Goodwin, C. (2011) · Journal of the Dermatology Nurses' Association · doi:10.1097/jdn.0b013e3182274a98 · Cited by 578 · see citing works

Multi-layered culture of human skin fibroblasts and keratinocytes through three-dimensional freeform fabrication.

Lee, W., Debasitis, J., Lee, V. K., Lee, J.-H., Fischer, K., Edminster, K. R., Park, J., & Yoo, S.-S. (2009) · Biomaterials · doi:10.1016/j.biomaterials.2008.12.009 · Cited by 576 · see citing works

An additive manufacturing-based PCL-alginate-chondrocyte bioprinted scaffold for cartilage tissue engineering

Kundu, J., Shim, J., Jang, J., Kim, S., & Cho, D. (2013) · Journal of Tissue Engineering and Regenerative Medicine · doi:10.1002/term.1682 · Cited by 553 · see citing works

Engineering alginate as bioink for bioprinting

Jia, J., Richards, D., Pollard, S., Tan, Y. J., Rodriguez, J., Visconti, R. P., Trusk, T. C., Yost, M. J., Yao, H., Markwald, R. R., et al. (2014) · Acta Biomaterialia · doi:10.1016/j.actbio.2014.06.034 · Cited by 551 · see citing works

Hydrogel-based 3D bioprinting: A comprehensive review on cell-laden hydrogels, bioink formulations, and future perspectives

Unagolla, J. M., & Jayasuriya, A. C. (2019) · Applied Materials Today · doi:10.1016/j.apmt.2019.100479 · Cited by 551 · see citing works

Evaluation of hydrogels for bio‐printing applications

Murphy, S. V., Skardal, A., & Atala, A. (2012) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.34326 · Cited by 547 · see citing works

Recent Advances in Biomaterials for 3D Printing and Tissue Engineering

Jammalamadaka, U. M., & Tappa, K. K. (2018) · Journal of Functional Biomaterials · doi:10.3390/jfb9010022 · Cited by 528 · see citing works

Challenges in Cardiac Tissue Engineering

Vunjak-Novakovic, G., Tandon, N., Godier, A. F. G., Maidhof, R., Marsano, A., Martens, T., & Radišić, M. (2009) · Tissue engineering. Part B, Reviews · doi:10.1089/ten.teb.2009.0352 · Cited by 521 · see citing works

Engineered skin substitutes: practices and potentials

Supp, D. M., & Boyce, S. T. (2005) · Clinics in Dermatology · doi:10.1016/j.clindermatol.2004.07.023 · Cited by 519 · see citing works

In Situ Bioprinting of Autologous Skin Cells Accelerates Wound Healing of Extensive Excisional Full-Thickness Wounds

Albanna, M., Binder, K. W., Murphy, S. V., Kim, J. H., Qasem, S. A., Zhao, W., Tan, J., El-Amin, I. B., Dice, D. D., Marco, J., et al. (2019) · Scientific Reports · doi:10.1038/s41598-018-38366-w · Cited by 519 · see citing works

‘Printability' of Candidate Biomaterials for Extrusion Based 3D Printing: State‐of‐the‐Art

Kyle, S., Jessop, Z. M., Al‐Sabah, A., & Whitaker, I. S. (2017) · Advanced Healthcare Materials · doi:10.1002/adhm.201700264 · Cited by 497 · see citing works

Creating perfused functional vascular channels using 3D bio-printing technology

Lee, V. K., Kim, D. Y., Ngo, H., Lee, Y., Seo, L., Yoo, S.-S., Vincent, P. A., & Dai, G. (2014) · Biomaterials · doi:10.1016/j.biomaterials.2014.05.083 · Cited by 494 · see citing works

Cartilage Tissue Engineering by the 3D Bioprinting of iPS Cells in a Nanocellulose/Alginate Bioink

Nguyen, D., Hägg, D. A., Forsman, A., Ekholm, J., Nimkingratana, P., Brantsing, C., Kalogeropoulos, T., Zaunz, S., Concaro, S., Brittberg, M., et al. (2017) · Scientific Reports · doi:10.1038/s41598-017-00690-y · Cited by 491 · see citing works

Extracellular Total Electrolyte Concentration Imaging for Electrical Brain Stimulation (EBS)

Sajib, S. Z. K., Lee, M. B., Kim, H. J., Woo, E. J., & Kwon, O. I. (2018) · Scientific Reports · doi:10.1038/s41598-017-18515-3 · Cited by 491 · see citing works

An Acellular Biologic Scaffold Promotes Skeletal Muscle Formation in Mice and Humans with Volumetric Muscle Loss

Sicari, B. M., Rubin, J. P., Dearth, C. L., Wolf, M. T., Ambrosio, F., Boninger, M. L., Turner, N. J., Weber, D. J., Simpson, T. W., Wyse, A. J., et al. (2014) · Science Translational Medicine · doi:10.1126/scitranslmed.3008085 · Cited by 490 · see citing works

Recent Advances in Extrusion‐Based 3D Printing for Biomedical Applications

Placone, J. K., & Engler, A. J. (2017) · Advanced Healthcare Materials · doi:10.1002/adhm.201701161 · Cited by 489 · see citing works

Biomaterials for Integration with 3-D Bioprinting

Skardal, A., & Atala, A. (2014) · Annals of Biomedical Engineering · doi:10.1007/s10439-014-1207-1 · Cited by 476 · see citing works

3D bioprinting of functional human skin: production and in vivo analysis

Cubo, N., García, M., del Cañizo, J. F., Velasco, D., & Jorcano, J. L. (2016) · Biofabrication · doi:10.1088/1758-5090/9/1/015006 · Cited by 458 · see citing works

3D printing of layered brain-like structures using peptide modified gellan gum substrates

Lozano, R., Stevens, L., Thompson, B. C., Gilmore, K. J., Gorkin, R. A., III, Stewart, E. M., Panhuis, M. I. H., Romero‐Ortega, M. I., & Wallace, G. G. (2015) · Biomaterials · doi:10.1016/j.biomaterials.2015.07.022 · Cited by 446 · see citing works

Three-dimensional printed trileaflet valve conduits using biological hydrogels and human valve interstitial cells

Duan, B., Kapetanovic, E., Hockaday, L. A., & Butcher, J. T. (2013) · Acta Biomaterialia · doi:10.1016/j.actbio.2013.12.005 · Cited by 437 · see citing works

A comparison of different bioinks for 3D bioprinting of fibrocartilage and hyaline cartilage

Daly, A. C., Critchley, S. E., Rencsok, E. M., & Kelly, D. J. (2016) · Biofabrication · doi:10.1088/1758-5090/8/4/045002 · Cited by 436 · see citing works

Biomaterials based strategies for skeletal muscle tissue engineering: Existing technologies and future trends

Qazi, T. H., Mooney, D. J., Pumberger, M., Geißler, S., & Duda, G. N. (2015) · Biomaterials · doi:10.1016/j.biomaterials.2015.02.110 · Cited by 433 · see citing works

Silica Modified by Alcohol Polyoxyethylene Ether and Silane Coupling Agent Together to Achieve High Performance Rubber Composites Using the Latex Compounding Method

Zheng, J., Ye, X., Han, D., Zhao, S., Wu, X., Wu, Y., Dong, D., Wang, Y., & Zhang, L. (2017) · Polymers · doi:10.3390/polym10010001 · Cited by 408 · see citing works

3D printing of composite tissue with complex shape applied to ear regeneration

Lee, J., Hong, J. M., Jung, J. W., Shim, J., Oh, J., & Cho, D. (2014) · Biofabrication · doi:10.1088/1758-5082/6/2/024103 · Cited by 407 · see citing works

Bioprinted Osteogenic and Vasculogenic Patterns for Engineering 3D Bone Tissue

Byambaa, B., Annabi, N., Yue, K., Santiago, G. T., Álvarez, M. M., Jia, W., Kazemzadeh‐Narbat, M., Shin, S. R., Tamayol, A., & Khademhosseini, A. (2017) · Advanced Healthcare Materials · doi:10.1002/adhm.201700015 · Cited by 396 · see citing works

Cell-based tissue engineering strategies used in the clinical repair of articular cartilage

Huang, B. J., Hu, J. C. Y., & Athanasiou, K. A. (2016) · Biomaterials · doi:10.1016/j.biomaterials.2016.04.018 · Cited by 395 · see citing works

Three-dimensional bioprinting of complex cell laden alginate hydrogel structures

Tabriz, A. G., Hermida, M. A., Leslie, N. R., & Shu, W. (2015) · Biofabrication · doi:10.1088/1758-5090/7/4/045012 · Cited by 394 · see citing works

Gold Nanocomposite Bioink for Printing 3D Cardiac Constructs

Zhu, K., Shin, S. R., van Kempen, T., Li, Y., Ponraj, V., Nasajpour, A., Mandla, S., Hu, N., Liu, X., Leijten, J., et al. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201605352 · Cited by 389 · see citing works

Airway smooth muscle dynamics: a common pathway of airway obstruction in asthma

An, S. S., Bai, T. R., Bates, J. H. T., Black, J. L., Brown, R. H., Brusasco, V., Chitano, P., Deng, L., Dowell, M. L., Eidelman, D. H., et al. (2007) · European Respiratory Journal · doi:10.1183/09031936.00112606 · Cited by 383 · see citing works

Biofabrication of tissue constructs by 3D bioprinting of cell-laden microcarriers

Levato, R., Visser, J., Planell, J. A., Engel, E., Malda, J., & Mateos‐Timoneda, M. A. (2014) · Biofabrication · doi:10.1088/1758-5082/6/3/035020 · Cited by 381 · see citing works

Functional 3D Neural Mini‐Tissues from Printed Gel‐Based Bioink and Human Neural Stem Cells

Gu, Q., Tomaskovic‐Crook, E., Lozano, R., Chen, Y., Kapsa, R. M. I., Zhou, Q., Wallace, G. G., & Crook, J. M. (2016) · Advanced Healthcare Materials · doi:10.1002/adhm.201600095 · Cited by 380 · see citing works

A multi-cellular 3D bioprinting approach for vascularized heart tissue engineering based on HUVECs and iPSC-derived cardiomyocytes

Maiullari, F., Costantini, M., Milan, M., Pace, V., Chirivì, M., Maiullari, S., Rainer, A., Baci, D., Marei, H. E. S., Seliktar, D., et al. (2018) · Scientific Reports · doi:10.1038/s41598-018-31848-x · Cited by 375 · see citing works

A 3D bioprinted complex structure for engineering the muscle–tendon unit

Merceron, T. K., Burt, M. A., Seol, Y., Kang, H.-W., Lee, S. J., Yoo, J. J., & Atala, A. (2015) · Biofabrication · doi:10.1088/1758-5090/7/3/035003 · Cited by 373 · see citing works

Four-dimensional bioprinting: Current developments and applications in bone tissue engineering

Wan, Z., Zhang, P., Liu, Y., Lv, L., & Zhou, Y. (2019) · Acta Biomaterialia · doi:10.1016/j.actbio.2019.10.038 · Cited by 371 · see citing works

Biofabrication: a 21st century manufacturing paradigm

Mironov, V. A., Trusk, T. C., Kasyanov, V. A., Little, S., Swaja, R., & Markwald, R. R. (2009) · Biofabrication · doi:10.1088/1758-5082/1/2/022001 · Cited by 369 · see citing works

Tunable hydrogel composite with two-step processing in combination with innovative hardware upgrade for cell-based three-dimensional bioprinting

Wüst, S., Godla, M. E., Müller, R., & Hofmann, S. (2013) · Acta Biomaterialia · doi:10.1016/j.actbio.2013.10.016 · Cited by 357 · see citing works

Bio-inspired hydrogel composed of hyaluronic acid and alginate as a potential bioink for 3D bioprinting of articular cartilage engineering constructs

Antich, C., de Vicente, J., Jiménez, G., Chocarro, C., Carrillo, E., Montañez‐Heredia, E., Gálvez‐Martín, P., & Marchal, J. A. (2020) · Acta Biomaterialia · doi:10.1016/j.actbio.2020.01.046 · Cited by 355 · see citing works

Human Skin 3D Bioprinting Using Scaffold‐Free Approach

Pourchet, L. J., Thepot, A., Albouy, M., Courtial, E. J., Boher, A., Blum, L. J., & Marquette, C. A. (2017) · Advanced Healthcare Materials · doi:10.1002/adhm.201601101 · Cited by 352 · see citing works

Tailoring mechanical properties of decellularized extracellular matrix bioink by vitamin B2-induced photo-crosslinking

Jang, J., Kim, T. G., Kim, B. S., Kim, S.-W., Kwon, S., & Cho, D. (2016) · Acta Biomaterialia · doi:10.1016/j.actbio.2016.01.013 · Cited by 345 · see citing works

Generation of Multi-scale Vascular Network System Within 3D Hydrogel Using 3D Bio-printing Technology

Lee, V. K., Lanzi, A. M., Ngo, H., Yoo, S., Vincent, P. A., & Dai, G. (2014) · Cellular and Molecular Bioengineering · doi:10.1007/s12195-014-0340-0 · Cited by 343 · see citing works

Human Cartilage Repair with a Photoreactive Adhesive-Hydrogel Composite

Sharma, B., Fermanian, S., Gibson, M., Unterman, S., Herzka, D. A., Cascio, B., Coburn, J., Hui, A. Y., Marcus, N., Gold, G. E., et al. (2013) · Science Translational Medicine · doi:10.1126/scitranslmed.3004838 · Cited by 342 · see citing works

Tissue Engineered Bio‐Blood‐Vessels Constructed Using a Tissue‐Specific Bioink and 3D Coaxial Cell Printing Technique: A Novel Therapy for Ischemic Disease

Gao, G., Lee, J. H., Jang, J., Lee, D., Kong, J., Kim, B. S., Choi, Y., Jang, W. B., Hong, Y. J., Kwon, S., et al. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201700798 · Cited by 340 · see citing works

An overview of the suitability of hydrogel-forming polymers for extrusion-based 3D-printing

Kirchmajer, D. M., Gorkin, R. A., III, & Panhuis, M. I. H. (2015) · Journal of Materials Chemistry B · doi:10.1039/c5tb00393h · Cited by 336 · see citing works

Bioprinting and its applications in tissue engineering and regenerative medicine

Aljohani, W., Ullah, M. W., Zhang, X., & Yang, G. (2017) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2017.08.171 · Cited by 335 · see citing works

Microfluidic-enhanced 3D bioprinting of aligned myoblast-laden hydrogels leads to functionally organized myofibers in vitro and in vivo

Costantini, M., Testa, S., Mozetic, P., Barbetta, A., Fuoco, C., Fornetti, E., Tamiro, F., Bernardini, S., Jaroszewicz, J., Święszkowski, W., et al. (2017) · Biomaterials · doi:10.1016/j.biomaterials.2017.03.026 · Cited by 334 · see citing works

Development of a novel alginate‐polyvinyl alcohol‐hydroxyapatite hydrogel for 3D bioprinting bone tissue engineered scaffolds

Bendtsen, S. T., Quinnell, S. P., & Wei, M. (2017) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.36036 · Cited by 330 · see citing works

Asymmetric membranes as ideal wound dressings: An overview on production methods, structure, properties and performance relationship

Morgado, P. I., Aguiar‐Ricardo, A., & Correia, I. J. (2015) · Journal of Membrane Science · doi:10.1016/j.memsci.2015.04.064 · Cited by 329 · see citing works

Elastin biosynthesis: The missing link in tissue-engineered blood vessels

Patel, A. C., Fine, B., Sandig, M., & Mequanint, K. (2006) · Cardiovascular Research · doi:10.1016/j.cardiores.2006.02.021 · Cited by 328 · see citing works

The bio in the ink: cartilage regeneration with bioprintable hydrogels and articular cartilage-derived progenitor cells

Levato, R., Webb, W. R., Otto, I. A., Mensinga, A., Zhang, Y., van Rijen, M. H. P., van Weeren, P. R., Khan, I. M., & Malda, J. (2017) · Acta Biomaterialia · doi:10.1016/j.actbio.2017.08.005 · Cited by 328 · see citing works

Stereolithography in tissue engineering

Skoog, S. A., Goering, P. L., & Narayan, R. J. (2013) · Journal of Materials Science Materials in Medicine · doi:10.1007/s10856-013-5107-y · Cited by 324 · see citing works

Protein-releasing polymeric scaffolds induce fibrochondrocytic differentiation of endogenous cells for knee meniscus regeneration in sheep

Lee, C. H., Rodeo, S. A., Fortier, L. A., Lu, C., Erişken, C., & Mao, J. J. (2014) · Science Translational Medicine · doi:10.1126/scitranslmed.3009696 · Cited by 323 · see citing works

A 3D cell printed muscle construct with tissue-derived bioink for the treatment of volumetric muscle loss

Choi, Y., Jun, Y. J., Kim, D., Yi, H., Chae, S.-H., Kang, J.-S., Lee, J., Gao, G., Kong, J., Jang, J., et al. (2019) · Biomaterials · doi:10.1016/j.biomaterials.2019.03.036 · Cited by 319 · see citing works

Skin Tissue Engineering for Tissue Repair and Regeneration

Priya, S. G., Jungvid, H., & Kumar, A. (2008) · Tissue Engineering Part B Reviews · doi:10.1089/teb.2007.0318 · Cited by 317 · see citing works

Tailored Approaches in Drug Development and Diagnostics: From Molecular Design to Biological Model Systems

Sahlgren, C., Meinander, A., Zhang, H., Cheng, F., Preis, M., Xu, C., Salminen, T. A., Toivola, D. M., Abankwa, D., Rosling, A., et al. (2017) · Advanced Healthcare Materials · doi:10.1002/adhm.201700258 · Cited by 315 · see citing works

<i>In situ</i>handheld three‐dimensional bioprinting for cartilage regeneration

Di Bella, C., Duchi, S., O'Connell, C. D., Blanchard, R., Augustine, C., Yue, Z., Thompson, F., Richards, C., Beirne, S., Onofrillo, C., et al. (2018) · Journal of Tissue Engineering and Regenerative Medicine · doi:10.1002/term.2476 · Cited by 313 · see citing works

Epicardial application of cardiac progenitor cells in a 3D-printed gelatin/hyaluronic acid patch preserves cardiac function after myocardial infarction

Gaetani, R., Feyen, D. A. M., Verhage, V., Slaats, R. H., Messina, E., Christman, K. L., Giacomello, A., Doevendans, P. A., & Sluijter, J. P. G. (2015) · Biomaterials · doi:10.1016/j.biomaterials.2015.05.005 · Cited by 308 · see citing works

3D Printed Stem‐Cell Derived Neural Progenitors Generate Spinal Cord Scaffolds

Joung, D., Truong, V., Neitzke, C. C., Guo, S., Walsh, P., Monat, J. R., Meng, F., Park, S. H., Dutton, J. R., Parr, A. M., et al. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201801850 · Cited by 308 · see citing works

Digitally Tunable Microfluidic Bioprinting of Multilayered Cannular Tissues

Pi, Q., Maharjan, S., Xiang, Y., Liu, X., Singh, B., van Genderen, A. M., Robledo‐Padilla, F., Parra‐Saldívar, R., Hu, N., Jia, W., et al. (2018) · Advanced Materials · doi:10.1002/adma.201706913 · Cited by 307 · see citing works

Skeletal muscle tissue engineering: methods to form skeletal myotubes and their applications

Ostrovidov, S., Hosseini, V., Ahadian, S., Fujie, T., Parthiban, S. P., Ramalingam, M., Bae, H., Kaji, H., & Khademhosseini, A. (2014) · Tissue Engineering Part B: Reviews · doi:10.1089/ten.teb.2013.0534 · Cited by 302 · see citing works

3D bioprinted functional and contractile cardiac tissue constructs

Wang, Z., Lee, S. J., Cheng, H.-J., Yoo, J. J., & Atala, A. (2018) · Acta Biomaterialia · doi:10.1016/j.actbio.2018.02.007 · Cited by 301 · see citing works

3D cell printing of functional skeletal muscle constructs using skeletal muscle-derived bioink

Choi, Y., Kim, T. G., Jeong, J., Yi, H., Park, J. W., Hwang, W., & Cho, D. (2016) · Advanced Healthcare Materials · doi:10.1002/adhm.201600483 · Cited by 298 · see citing works

3D Bioprinting in Skeletal Muscle Tissue Engineering

Ostrovidov, S., Salehi, S., Costantini, M., Suthiwanich, K., Ebrahimi, M., Sadeghian, R. B., Fujie, T., Shi, X., Cannata, S. M., Gargioli, C., et al. (2019) · Small · doi:10.1002/smll.201805530 · Cited by 296 · see citing works

3D Bioprinted Human Skeletal Muscle Constructs for Muscle Function Restoration

Kim, J. H., Seol, Y., Ko, I. K., Kang, H.-W., Lee, Y. K., Yoo, J. J., Atala, A., & Lee, S. J. (2018) · Scientific Reports · doi:10.1038/s41598-018-29968-5 · Cited by 294 · see citing works

3D Printing in Suspension Baths: Keeping the Promises of Bioprinting Afloat

McCormack, A., Highley, C. B., Leslie, N. R., & Melchels, F. P. W. (2020) · Trends in biotechnology · doi:10.1016/j.tibtech.2019.12.020 · Cited by 289 · see citing works

A clinical review of cartilage repair techniques

Smith, G. D., Knutsen, G., & Richardson, J. B. (2005) · Journal of Bone and Joint Surgery - British Volume · doi:10.1302/0301-620x.87b4.15971 · Cited by 288 · see citing works

Cell biology of hydrogels

Smetana, K. (1993) · Biomaterials · doi:10.1016/0142-9612(93)90203-e · Cited by 287 · see citing works

Direct 3D cell-printing of human skin with functional transwell system

Kim, B. S., Lee, J., Gao, G., & Cho, D. (2017) · Biofabrication · doi:10.1088/1758-5090/aa71c8 · Cited by 286 · see citing works

Coaxial extrusion bioprinting of 3D microfibrous constructs with cell-favorable gelatin methacryloyl microenvironments

Liu, W. H., Zhong, Z., Hu, N., Zhou, Y., Maggio, L., Miri, A. K., Fragasso, A., Jin, X., Khademhosseini, A., & Zhang, Y. S. (2017) · Biofabrication · doi:10.1088/1758-5090/aa9d44 · Cited by 284 · see citing works

3D bioprinting of human chondrocyte-laden nanocellulose hydrogels for patient-specific auricular cartilage regeneration

Ávila, H. M., Schwarz, S., Rotter, N., & Gatenholm, P. (2016) · Bioprinting · doi:10.1016/j.bprint.2016.08.003 · Cited by 283 · see citing works

Hyaluronic Acid and Dextran-Based Semi-IPN Hydrogels as Biomaterials for Bioprinting

Pescosolido, L., Schuurman, W., Malda, J., Matricardi, P., Alhaique, F., Coviello, T., van Weeren, P. R., Dhert, W. J. A., Hennink, W. E., & Vermonden, T. (2011) · Biomacromolecules · doi:10.1021/bm200178w · Cited by 281 · see citing works

Application of Platelet-Rich Plasma in Plastic Surgery: Clinical and In Vitro Evaluation

Cervelli, V., Gentile, P., Scioli, M. G., Grimaldi, M., Casciani, C. U., Spagnoli, L. G., & Orlandi, A. (2009) · Tissue Engineering Part C Methods · doi:10.1089/ten.tec.2008.0518 · Cited by 276 · see citing works

Development of the Biopen: a handheld device for surgical printing of adipose stem cells at a chondral wound site

O’Connell, C. D., Bella, C. D., Thompson, F., Augustine, C., Beirne, S., Cornock, R., Richards, C. J., Chung, J. H.-Y., Gambhir, S., Yue, Z., et al. (2016) · Biofabrication · doi:10.1088/1758-5090/8/1/015019 · Cited by 274 · see citing works

Advances and Future Perspectives in 4D Bioprinting

Ashammakhi, N. A., Ahadian, S., Fan, Z., Suthiwanich, K., Lorestani, F., Orive, G., Ostrovidov, S., & Khademhosseini, A. (2018) · Biotechnology Journal · doi:10.1002/biot.201800148 · Cited by 273 · see citing works

3D Bioprinting of Developmentally Inspired Templates for Whole Bone Organ Engineering

Daly, A. C., Cunniffe, G. M., Sathy, B. N., Jeon, O., Alsberg, E., & Kelly, D. J. (2016) · Advanced Healthcare Materials · doi:10.1002/adhm.201600182 · Cited by 272 · see citing works

Multiscale bioprinting of vascularized models

Miri, A. K., Khalilpour, A., Çeçen, B., Maharjan, S., Shin, S. R., & Khademhosseini, A. (2018) · Biomaterials · doi:10.1016/j.biomaterials.2018.08.006 · Cited by 272 · see citing works

Three-dimensional bioprinting using self-assembling scalable scaffold-free “tissue strands” as a new bioink

Yu, Y., Moncal, K. K., Li, J., Peng, W., Rivero, I. V., Martin, J. A., & Ozbolat, I. T. (2016) · Scientific Reports · doi:10.1038/srep28714 · Cited by 271 · see citing works

3D Bioprinting of Vessel-like Structures with Multilevel Fluidic Channels

Gao, Q., Liu, Z., Lin, Z., Qiu, J., Liu, Y., Liu, A., Wang, Y., Xiang, M., Chen, B., Fu, J., et al. (2017) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.6b00643 · Cited by 269 · see citing works

Development of a hybrid scaffold with synthetic biomaterials and hydrogel using solid freeform fabrication technology

Shim, J., Kim, J. Y., Park, M., Park, J., & Cho, D. (2011) · Biofabrication · doi:10.1088/1758-5082/3/3/034102 · Cited by 267 · see citing works

Handheld skin printer: in situ formation of planar biomaterials and tissues

Hakimi, N., Cheng, R. Y., Leng, L., Sotoudehfar, M., Ba, P. Q., Bakhtyar, N., Amini‐Nik, S., Jeschke, M. G., & Günther, A. (2018) · Lab on a Chip · doi:10.1039/c7lc01236e · Cited by 260 · see citing works

Airway Smooth Muscle

Mitzner, W. (2004) · American Journal of Respiratory and Critical Care Medicine · doi:10.1164/rccm.200312-1636pp · Cited by 256 · see citing works

Hybrid hydrogels containing vertically aligned carbon nanotubes with anisotropic electrical conductivity for muscle myofiber fabrication

Ahadian, S., Ramón‐Azcón, J., Estili, M., Liang, X., Ostrovidov, S., Shiku, H., Ramalingam, M., Nakajima, K., Sakka, Y., Bae, H., et al. (2014) · Scientific Reports · doi:10.1038/srep04271 · Cited by 255 · see citing works

Bioprinting of 3D hydrogels

Stanton, M. M., Samitier, J., & Sánchez, S. (2015) · Lab on a Chip · doi:10.1039/c5lc90069g · Cited by 254 · see citing works

Excitability and contractility of skeletal muscle engineered from primary cultures and cell lines

Dennis, R. G., Kosnik, P. E., Gilbert, M. E., & Faulkner, J. A. (2001) · American Journal of Physiology-Cell Physiology · doi:10.1152/ajpcell.2001.280.2.c288 · Cited by 254 · see citing works

Biomaterials-based 3D cell printing for next-generation therapeutics and diagnostics

Jang, J., Park, J. Y., Gao, G., & Cho, D. (2017) · Biomaterials · doi:10.1016/j.biomaterials.2017.11.030 · Cited by 254 · see citing works

A brief review of extrusion‐based tissue scaffold bio‐printing

Ning, L., & Chen, D. (2017) · Biotechnology Journal · doi:10.1002/biot.201600671 · Cited by 253 · see citing works

Skin Bioprinting: Impending Reality or Fantasy?

Ng, W. L., Wang, S., Yeong, W. Y., & Naing, M. W. (2016) · Trends in biotechnology · doi:10.1016/j.tibtech.2016.04.006 · Cited by 251 · see citing works

Increasing electrospun scaffold pore size with tailored collectors for improved cell penetration

Vaquette, C., & Cooper-White, J. J. (2011) · Acta Biomaterialia · doi:10.1016/j.actbio.2011.02.036 · Cited by 247 · see citing works

3D-Printed High Strength Bioactive Supramolecular Polymer/Clay Nanocomposite Hydrogel Scaffold for Bone Regeneration

Zhai, X., Ma, Y., Hou, C., Gao, F., Zhang, Y., Ruan, C., Pan, H., Lu, W. W., & Liu, W. (2017) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.7b00224 · Cited by 245 · see citing works

Advancing Frontiers in Bone Bioprinting

Ashammakhi, N. A., Hasan, A., Kaarela, O. I., Byambaa, B., Sheikhi, A., Gaharwar, A. K., & Khademhosseini, A. (2019) · Advanced Healthcare Materials · doi:10.1002/adhm.201801048 · Cited by 245 · see citing works

Engineered Contractile Skeletal Muscle Tissue on a Microgrooved Methacrylated Gelatin Substrate

Hosseini, V., Ahadian, S., Ostrovidov, S., Camci‐Unal, G., Chen, S., Kaji, H., Ramalingam, M., & Khademhosseini, A. (2012) · Tissue Engineering Part A · doi:10.1089/ten.tea.2012.0181 · Cited by 242 · see citing works

UV-Assisted 3D Bioprinting of Nanoreinforced Hybrid Cardiac Patch for Myocardial Tissue Engineering

Izadifar, M., Chapman, D., Babyn, P., Chen, D., & Kelly, M. (2017) · Tissue Engineering Part C Methods · doi:10.1089/ten.tec.2017.0346 · Cited by 239 · see citing works

Neural cell integration into 3D bioprinted skeletal muscle constructs accelerates restoration of muscle function

Kim, J. H., Kim, I., Seol, Y., Ko, I. K., Yoo, J. J., Atala, A., & Lee, S. J. (2020) · Nature Communications · doi:10.1038/s41467-020-14930-9 · Cited by 233 · see citing works

3D bioprinting of skin: a state-of-the-art review on modelling, materials, and processes

Vijayavenkataraman, S., Lu, W. F., & Fuh, J. (2016) · Biofabrication · doi:10.1088/1758-5090/8/3/032001 · Cited by 232 · see citing works

Bioprinting Complex Cartilaginous Structures with Clinically Compliant Biomaterials

Kesti, M., Eberhardt, C., Pagliccia, G., Kenkel, D., Grande, D. A., Boss, A., & Zenobi‐Wong, M. (2015) · Advanced Functional Materials · doi:10.1002/adfm.201503423 · Cited by 230 · see citing works

Bioprinted thrombosis-on-a-chip

Zhang, Y. S., Davoudi, F., Walch, P., Manbachi, A., Luo, X., Dell'Erba, V., Miri, A. K., Albadawi, H., Arneri, A., Li, X., et al. (2016) · Lab on a Chip · doi:10.1039/c6lc00380j · Cited by 227 · see citing works

In vitro study of directly bioprinted perfusable vasculature conduits

Zhang, Y., Yu, Y., Akkouch, A., Dababneh, A., Dolati, F., & Ozbolat, I. T. (2014) · Biomaterials Science · doi:10.1039/c4bm00234b · Cited by 226 · see citing works

Self-expanding/shrinking structures by 4D printing

Bodaghi, M., Damanpack, A. R., & Liao, W. (2016) · Smart Materials and Structures · doi:10.1088/0964-1726/25/10/105034 · Cited by 226 · see citing works

Handheld co-axial bioprinting: application to in situ surgical cartilage repair

Duchi, S., Onofrillo, C., O’Connell, C. D., Blanchard, R., Augustine, C., Quigley, A. F., Kapsa, R. M. I., Pivonka, P., Wallace, G., Di Bella, C., et al. (2017) · Scientific Reports · doi:10.1038/s41598-017-05699-x · Cited by 219 · see citing works

Tissue Engineering Applications of Three-Dimensional Bioprinting

Zhang, X., & Zhang, Y. (2015) · Cell Biochemistry and Biophysics · doi:10.1007/s12013-015-0531-x · Cited by 218 · see citing works

Engineering Microfluidic Organoid-on-a-Chip Platforms

Yu, F., Hunziker, W., & Choudhury, D. (2019) · Micromachines · doi:10.3390/mi10030165 · Cited by 218 · see citing works

3D printed microchannel networks to direct vascularisation during endochondral bone repair

Daly, A. C., Pitacco, P., Nulty, J. M., Cunniffe, G. M., & Kelly, D. J. (2018) · Biomaterials · doi:10.1016/j.biomaterials.2018.01.057 · Cited by 217 · see citing works

Metabolic adaptation in obesity and type ii diabetes: myokines, adipokines and hepatokines

Oh, K.-J., Lee, D., Kim, W., Han, B., Lee, S., & Bae, K.-H. (2016) · International Journal of Molecular Sciences · doi:10.3390/ijms18010008 · Cited by 210 · see citing works

Engineering articular cartilage with spatially-varying matrix composition and mechanical properties from a single stem cell population using a multi-layered hydrogel

Nguyen, L. H., Kudva, A. K., Saxena, N. S., & Roy, K. (2011) · Biomaterials · doi:10.1016/j.biomaterials.2011.06.014 · Cited by 209 · see citing works

Decellularized extracellular matrix: a step towards the next generation source for bioink manufacturing

Kim, B. S., Kim, H., Gao, G., Jang, J., & Cho, D. (2017) · Biofabrication · doi:10.1088/1758-5090/aa7e98 · Cited by 207 · see citing works

3D Printing and Electrospinning of Composite Hydrogels for Cartilage and Bone Tissue Engineering

Mori, A. D., Fernández, M. P., Blunn, G. W., Tozzi, G., & Roldo, M. (2018) · Polymers · doi:10.3390/polym10030285 · Cited by 206 · see citing works

Bioprinting of tissue engineering scaffolds

Rider, P. M., Kačarević, Ž. P., Alkildani, S., Retnasingh, S., & Barbeck, M. (2018) · Journal of Tissue Engineering · doi:10.1177/2041731418802090 · Cited by 206 · see citing works

Biofabrication and testing of a fully cellular nerve graft

Owens, C. M., Marga, F. S., Forgács, G., & Heesch, C. M. (2013) · Biofabrication · doi:10.1088/1758-5082/5/4/045007 · Cited by 205 · see citing works

A Review of 3D Printing Techniques and the Future in Biofabrication of Bioprinted Tissue

Patra, S., & Young, V. (2016) · Cell Biochemistry and Biophysics · doi:10.1007/s12013-016-0730-0 · Cited by 203 · see citing works

3D‐Bioprinted Osteoblast‐Laden Nanocomposite Hydrogel Constructs with Induced Microenvironments Promote Cell Viability, Differentiation, and Osteogenesis both In Vitro and In Vivo

Zhai, X., Ruan, C., Ma, Y., Cheng, D., Wu, M., Liu, W., Zhao, X., Pan, H., & Lu, W. W. (2017) · Advanced Science · doi:10.1002/advs.201700550 · Cited by 199 · see citing works

Dose-response of different dietary leucine levels on growth performance and amino acid metabolism in piglets differing for aminoadipate-semialdehyde synthase genotypes

Bertocchi, M., Bosi, P., Luise, D., Motta, V., Salvarani, C., Ribani, A., Bovo, S., Simongiovanni, A., Matsunaga, K., Takimoto, T., et al. (2019) · Scientific Reports · doi:10.1038/s41598-019-55006-z · Cited by 195 · see citing works

3D Bioprinting: A Novel Avenue for Manufacturing Tissues and Organs

Zhang, B., Gao, L., Ma, L., Luo, Y., Yang, H., & Cui, Z. (2019) · Engineering · doi:10.1016/j.eng.2019.03.009 · Cited by 194 · see citing works

Osteogenic and angiogenic tissue formation in high fidelity nanocomposite Laponite-gelatin bioinks

Cidonio, G., Alcala‐Orozco, C. R., Lim, K. S., Glinka, M., Mutreja, I., Kim, Y., Dawson, J. I., Woodfield, T. B. F., & Oreffo, R. O. C. (2019) · Biofabrication · doi:10.1088/1758-5090/ab19fd · Cited by 192 · see citing works

Engineering a morphogenetically active hydrogel for bioprinting of bioartificial tissue derived from human osteoblast-like SaOS-2 cells

Neufurth, M., Wang, X., Schröder, H. C., Feng, Q., Diehl‐Seifert, B., Ziebart, T., Steffen, R., Wang, S., & Müller, W. E. G. (2014) · Biomaterials · doi:10.1016/j.biomaterials.2014.07.002 · Cited by 186 · see citing works

Skin bioprinting: a novel approach for creating artificial skin from synthetic and natural building blocks

Augustine, R. (2018) · Progress in Biomaterials · doi:10.1007/s40204-018-0087-0 · Cited by 184 · see citing works

Smart hydrogels for 3D bioprinting

Wang, S., Lee, J. M., & Yeong, W. Y. (2015) · International Journal of Bioprinting · doi:10.18063/ijb.2015.01.005 · Cited by 182 · see citing works

3D Bioprinting Using a Templated Porous Bioink

Armstrong, J. P. K., Burke, M., Carter, B. M., Davis, S. A., & Perriman, A. W. (2016) · Advanced Healthcare Materials · doi:10.1002/adhm.201600022 · Cited by 182 · see citing works

Patient‐Specific Bioinks for 3D Bioprinting of Tissue Engineering Scaffolds

Faramarzi, N., Yazdi, I. K., Nabavinia, M., Gemma, A., Fanelli, A., Caizzone, A., Ptaszek, L. M., Sinha, I., Khademhosseini, A., Ruskin, J. N., et al. (2018) · Advanced Healthcare Materials · doi:10.1002/adhm.201701347 · Cited by 182 · see citing works

Advancements and frontiers in nano-based 3D and 4D scaffolds for bone and cartilage tissue engineering

Qasim, M. H., Chae, D., & Lee, N. Y. (2019) · International Journal of Nanomedicine · doi:10.2147/ijn.s209431 · Cited by 182 · see citing works

Direct Fabrication of a Hybrid Cell/Hydrogel Construct by a Double-nozzle Assembling Technology

Li, S., Xiong, Z., Wang, X., Yan, Y., Liu, H., & Zhang, R. (2009) · Journal of Bioactive and Compatible Polymers · doi:10.1177/0883911509104094 · Cited by 181 · see citing works

Direct Bioprinting of Vessel-Like Tubular Microfluidic Channels

Zhang, Y., Yu, Y., & Ozbolat, I. T. (2013) · Journal of Nanotechnology in Engineering and Medicine · doi:10.1115/1.4024398 · Cited by 179 · see citing works

Three-dimensional printing of biological matters

Munaz, A., Vadivelu, R. K., John, J. A. S., Barton, M., Kamble, H., & Nguyen, N. (2016) · Journal of Science Advanced Materials and Devices · doi:10.1016/j.jsamd.2016.04.001 · Cited by 179 · see citing works

Strategy to Achieve Highly Porous/Biocompatible Macroscale Cell Blocks, Using a Collagen/Genipin-bioink and an Optimal 3D Printing Process

Kim, Y. B., Lee, H., & Kim, G. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b11669 · Cited by 179 · see citing works

Application of Extrusion-Based Hydrogel Bioprinting for Cartilage Tissue Engineering

You, F., Eames, B. F., & Chen, D. (2017) · International Journal of Molecular Sciences · doi:10.3390/ijms18071597 · Cited by 178 · see citing works

Extrusion printing of ionic–covalent entanglement hydrogels with high toughness

Bakarich, S. E., Panhuis, M. I. H., Beirne, S., Wallace, G. G., & Spinks, G. M. (2013) · Journal of Materials Chemistry B · doi:10.1039/c3tb21159b · Cited by 177 · see citing works

Coaxial 3D bioprinting of self-assembled multicellular heterogeneous tumor fibers

Dai, X., Liu, L., Ouyang, J., Li, X., Zhang, X., Lan, Q., & Xu, T. (2017) · Scientific Reports · doi:10.1038/s41598-017-01581-y · Cited by 175 · see citing works

Hybrid Process for Fabricating 3D Hierarchical Scaffolds Combining Rapid Prototyping and Electrospinning

Kim, G., Son, J.-G., Park, S., & Kim, W. D. (2008) · Macromolecular Rapid Communications · doi:10.1002/marc.200800277 · Cited by 172 · see citing works

In situ repair of bone and cartilage defects using 3D scanning and 3D printing

Li, L., Yu, F., Shi, J., Shen, S., Teng, H., Yang, J., Wang, X., & Jiang, Q. Y. (2017) · Scientific Reports · doi:10.1038/s41598-017-10060-3 · Cited by 172 · see citing works

Application of robotic-assisted in situ 3D printing in cartilage regeneration with HAMA hydrogel: An in vivo study

Ma, K., Zhao, T., Yang, L., Wang, P., Jin, J., Teng, H., Xia, D., Zhu, L., Li, L., Jiang, Q. Y., et al. (2020) · Journal of Advanced Research · doi:10.1016/j.jare.2020.01.010 · Cited by 172 · see citing works

Bacterial cellulose nanofibers promote stress and fidelity of 3D-printed silk based hydrogel scaffold with hierarchical pores

Huang, L. Q., Du, X., Fan, S., Yang, G., Shao, H., Li, D., Cao, C., Zhu, Y., Zhu, M., & Zhang, Y. (2019) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2019.05.080 · Cited by 171 · see citing works

3D printing of concentrated alginate/gelatin scaffolds with homogeneous nano apatite coating for bone tissue engineering

Luo, Y., Li, Y., Qin, X., & Wa, Q. (2018) · Materials & Design · doi:10.1016/j.matdes.2018.03.002 · Cited by 170 · see citing works

Additive manufacturing for in situ repair of osteochondral defects

Cohen, D. L., Lipton, J. I., Bonassar, L. J., & Lipson, H. (2010) · Biofabrication · doi:10.1088/1758-5082/2/3/035004 · Cited by 169 · see citing works

3D bioprinting processes: A perspective on classification and terminology

Lee, J. M., Sing, S. L., Zhou, M., & Yeong, W. Y. (2018) · International Journal of Bioprinting · doi:10.18063/ijb.v4i2.151 · Cited by 165 · see citing works

3D Printed Tissue Models: Present and Future

Jang, J., Yi, H., & Cho, D. (2016) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.6b00129 · Cited by 163 · see citing works

Bone matrix production in hydroxyapatite-modified hydrogels suitable for bone bioprinting

Wenz, A., Borchers, K., Tovar, G. E. M., & Kluger, P. J. (2017) · Biofabrication · doi:10.1088/1758-5090/aa91ec · Cited by 162 · see citing works

Microfluidic bioprinting for organ-on-a-chip models

Yu, F., & Choudhury, D. (2019) · Drug Discovery Today · doi:10.1016/j.drudis.2019.03.025 · Cited by 161 · see citing works

Recent Advances in 4D Bioprinting

Yang, Q., Gao, B., & Xu, F. (2019) · Biotechnology Journal · doi:10.1002/biot.201900086 · Cited by 161 · see citing works

An Innovative Collagen-Based Cell-Printing Method for Obtaining Human Adipose Stem Cell-Laden Structures Consisting of Core–Sheath Structures for Tissue Engineering

Yeo, M., Lee, J., Chun, W., & Kim, G. (2016) · Biomacromolecules · doi:10.1021/acs.biomac.5b01764 · Cited by 159 · see citing works

Printability study of hydrogel solution extrusion in nanoclay yield-stress bath during printing-then-gelation biofabrication

Jin, Y., Chai, W., & Huang, Y. H. (2017) · Materials Science and Engineering C · doi:10.1016/j.msec.2017.05.144 · Cited by 159 · see citing works

A 3D printed microfluidic device for production of functionalized hydrogel microcapsules for culture and differentiation of human Neuronal Stem Cells (hNSC)

Alessandri, K., Feyeux, M., Gurchenkov, B., Delgado, C., Trushko, A., Krause, K., Vignjevic, D. M., Nassoy, P., & Roux, A. (2016) · Lab on a Chip · doi:10.1039/c6lc00133e · Cited by 156 · see citing works

The scaffold microenvironment for stem cell based bone tissue engineering

Hao, Z., Song, Z., Huang, J. C., Huang, K., Panetta, A., Gu, Z., & Wu, J. (2017) · Biomaterials Science · doi:10.1039/c7bm00146k · Cited by 155 · see citing works

Unique biomaterial compositions direct bone marrow stem cells into specific chondrocytic phenotypes corresponding to the various zones of articular cartilage

Nguyen, L. H., Kudva, A. K., Guckert, N. L., Linse, K. D., & Roy, K. (2010) · Biomaterials · doi:10.1016/j.biomaterials.2010.10.009 · Cited by 154 · see citing works

Fabrication and characterization of electrospinning/3D printing bone tissue engineering scaffold

Yu, Y., Hua, S., Yang, M., Fu, Z., Teng, S., Niu, K., Zhao, Q., & Yi, C. (2016) · RSC Advances · doi:10.1039/c6ra17718b · Cited by 153 · see citing works

Biomaterials in Tendon and Skeletal Muscle Tissue Engineering: Current Trends and Challenges

Beldjilali‐Labro, M., Garcia, A. G., Farhat, F., Bédoui, F., Grosset, J.-F., Dufresne, M., & Legallais, C. (2018) · Materials · doi:10.3390/ma11071116 · Cited by 153 · see citing works

In vitroevaluation of carbon-nanotube-reinforced bioprintable vascular conduits

Dolati, F., Yu, Y., Zhang, Y., Jesús, A. M. D., Sander, E. A., & Ozbolat, I. T. (2014) · Nanotechnology · doi:10.1088/0957-4484/25/14/145101 · Cited by 152 · see citing works

3D Bioprinted Nanocellulose-Based Hydrogels for Tissue Engineering Applications: A Brief Review

Athukoralalage, S. S. A., Balu, R., Dutta, N. K., & Choudhury, N. R. (2019) · Polymers · doi:10.3390/polym11050898 · Cited by 151 · see citing works

Scaffold Fabrication Technologies and Structure/Function Properties in Bone Tissue Engineering

Collins, M. N., Ren, G., Young, K., Pina, S., Reis, R. L., & Oliveira, J. M. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202010609 · Cited by 875 · see citing works

Recent advances in 3D-printed polylactide and polycaprolactone-based biomaterials for tissue engineering applications.

Arif, Z. U., Khalid, M. Y., Noroozi, R., Sadeghianmaryan, A., Jalalvand, M., & Hossain, M. (2022) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2022.07.140 · Cited by 395 · see citing works

3D printing of PLA/n-HA composite scaffolds with customized mechanical properties and biological functions for bone tissue engineering

Wang, W., Zhang, B., Li, M., Li, J., Zhang, C., Han, Y., Wang, L., Wang, K., Zhou, C., Liu, L., et al. (2021) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2021.109192 · Cited by 369 · see citing works

4D printing of shape memory polymer composites: A review on fabrication techniques, applications, and future perspectives

Khalid, M. Y., Arif, Z. U., Noroozi, R., Zolfagharian, A., & Bodaghi, M. (2022) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2022.07.035 · Cited by 337 · see citing works

Biopolymeric sustainable materials and their emerging applications

Arif, Z. U., Khalid, M. Y., Sheikh, M. F., Zolfagharian, A., & Bodaghi, M. (2022) · Journal of environmental chemical engineering · doi:10.1016/j.jece.2022.108159 · Cited by 292 · see citing works

Advances in 3D bioprinting of tissues/organs for regenerative medicine and in-vitro models.

Jain, P., Kathuria, H., & Dubey, N. (2022) · Biomaterials · doi:10.1016/j.biomaterials.2022.121639 · Cited by 195 · see citing works

4D bioprinting of smart polymers for biomedical applications: recent progress, challenges, and future perspectives

Arif, Z. U., Khalid, M. Y., Zolfagharian, A., & Bodaghi, M. (2022) · Reactive and Functional Polymers · doi:10.1016/j.reactfunctpolym.2022.105374 · Cited by 235 · see citing works

Big data, machine learning, and digital twin assisted additive manufacturing: A review

Jin, L., Zhai, X., Wang, K., Zhang, K., Wu, D., Nazir, A., Jiang, J., & Liao, W. (2024) · Materials & Design · doi:10.1016/j.matdes.2024.113086 · Cited by 220 · see citing works

Recent advances in GelMA hydrogel transplantation for musculoskeletal disorders and related disease treatment

Lv, B., Lu, L., Hu, L., Peng, C., Hu, Y., Xie, X., Dai, G., Mi, B., Liu, X., & Liu, G. (2023) · Theranostics · doi:10.7150/thno.80615 · Cited by 190 · see citing works

3D bioprinting in cardiac tissue engineering

Wang, Z., Wang, L., Li, T., Liu, S., Guo, B., Huang, W., & Wu, Y. (2021) · Theranostics · doi:10.7150/thno.61621 · Cited by 194 · see citing works

3D printing applications for healthcare research and development

Javaid, M., Haleem, A., Singh, R. P., & Suman, R. (2022) · Global Health Journal · doi:10.1016/j.glohj.2022.11.001 · Cited by 210 · see citing works

Polymeric biomaterials for 3D printing in medicine: An overview

Pugliese, R., Beltrami, B., Regondi, S., & Lunetta, C. (2021) · Annals of 3D Printed Medicine · doi:10.1016/j.stlm.2021.100011 · Cited by 178 · see citing works

4D printing: Technological developments in robotics applications

Khalid, M. Y., Arif, Z. U., Ahmed, W., Umer, R., Zolfagharian, A., & Bodaghi, M. (2022) · Sensors and Actuators A Physical · doi:10.1016/j.sna.2022.113670 · Cited by 150 · see citing works

Bone tissue engineering: Anionic polysaccharides as promising scaffolds

Sivakumar, P. M., Yetisgin, A. A., Sahin, S. B., Demir, E., & Çetinel, S. (2022) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2022.119142 · Cited by 147 · see citing works

Smart 3D Printed Hydrogel Skin Wound Bandages: A Review

Tsegay, F., Elsherif, M., & Butt, H. (2022) · Polymers · doi:10.3390/polym14051012 · Cited by 142 · see citing works

Auxetic metamaterials for bone-implanted medical devices: Recent advances and new perspectives

Shirzad, M., Zolfagharian, A., Bodaghi, M., & Nam, S. Y. (2022) · European Journal of Mechanics - A/Solids · doi:10.1016/j.euromechsol.2022.104905 · Cited by 138 · see citing works

Electrospun nanofiber/hydrogel composite materials and their tissue engineering applications

Zhang, M., Xu, S., Wang, R., Che, Y., Han, C., Feng, W., Wang, C., & Zhao, W. (2023) · Journal of Material Science and Technology · doi:10.1016/j.jmst.2023.04.015 · Cited by 138 · see citing works

On the progress of 3D-printed hydrogels for tissue engineering

Advíncula, R. C., Dizon, J. R. C., Caldona, E. B., Viers, R. A., Siacor, F. D. C., Maalihan, R. D., & Espera, A. H. (2021) · MRS Communications · doi:10.1557/s43579-021-00069-1 · Cited by 139 · see citing works

3D-printed alginate-hydroxyapatite aerogel scaffolds for bone tissue engineering

Iglesias‐Mejuto, A., & García‐González, C. A. (2021) · Materials Science and Engineering C · doi:10.1016/j.msec.2021.112525 · Cited by 136 · see citing works

Advances in Translational 3D Printing for Cartilage, Bone, and Osteochondral Tissue Engineering

Wang, S., Zhao, S., Yu, J., Gu, Z., & Zhang, Y. (2022) · Small · doi:10.1002/smll.202201869 · Cited by 125 · see citing works

4D printing of PLA-TPU blends: effect of PLA concentration, loading mode, and programming temperature on the shape memory effect

Rahmatabadi, D., Ghasemi, I., Baniassadi, M., Abrinia, K., & Baghani, M. (2023) · Journal of Materials Science · doi:10.1007/s10853-023-08460-0 · Cited by 124 · see citing works

An insight into synthesis, properties and applications of gelatin methacryloyl hydrogel for 3D bioprinting

Ghosh, R. N., Thomas, J., Vaidehi, B. R., G., D. N., Janardanan, A., Namboothiri, P. K., & Peter, M. (2023) · Materials Advances · doi:10.1039/d3ma00715d · Cited by 125 · see citing works

3D printing of bio-instructive materials: Toward directing the cell

Zieliński, P. S., Gudeti, P. K. R., Rikmanspoel, T., & Włodarczyk‐Biegun, M. K. (2022) · Bioactive Materials · doi:10.1016/j.bioactmat.2022.04.008 · Cited by 119 · see citing works

3D Bioprinting in Skin Related Research: Recent Achievements and Application Perspectives

Olejnik, A., Semba, J. A., Kulpa, A. M., Dańczak‐Pazdrowska, A., Rybka, J. D., & Gornowicz‐Porowska, J. (2021) · ACS Synthetic Biology · doi:10.1021/acssynbio.1c00547 · Cited by 114 · see citing works

Emerging 3D bioprinting applications in plastic surgery

Pu, Y., Ju, Y., Hu, Y., Xie, X., Fang, B., & Lei, L. (2023) · Biomaterials Research · doi:10.1186/s40824-022-00338-7 · Cited by 110 · see citing works

Influence of Infill Patterns Generated by CAD and FDM 3D Printer on Surface Roughness and Tensile Strength Properties

Dezaki, M. L., Ariffin, M. K. A. M., Serjouei, A., Zolfagharian, A., Hatami, S., & Bodaghi, M. (2021) · Applied Sciences · doi:10.3390/app11167272 · Cited by 107 · see citing works

3D and 4D Bioprinting Technologies: A Game Changer for the Biomedical Sector?

Noroozi, R., Arif, Z. U., Taghvaei, H., Khalid, M. Y., Sahbafar, H., Hadi, A., Sadeghianmaryan, A., & Chen, D. (2023) · Annals of Biomedical Engineering · doi:10.1007/s10439-023-03243-9 · Cited by 108 · see citing works

Advances in 3D skin bioprinting for wound healing and disease modeling

Zhang, M., Zhang, C., Li, Z., Fu, X., & Huang, S. (2022) · Regenerative Biomaterials · doi:10.1093/rb/rbac105 · Cited by 111 · see citing works

Biomaterial-based 3D bioprinting strategy for orthopedic tissue engineering

Chae, S., & Cho, D. (2022) · Acta Biomaterialia · doi:10.1016/j.actbio.2022.08.004 · Cited by 103 · see citing works

Recent advances in drug delivery nanocarriers incorporated in temperature-sensitive Pluronic F-127–A critical review

J, R. J. P., Oluwafemi, O. S., Thomas, S., & Oyedeji, A. O. (2022) · Journal of Drug Delivery Science and Technology · doi:10.1016/j.jddst.2022.103390 · Cited by 101 · see citing works

4D-printed bi-material composite laminate for manufacturing reversible shape-change structures

Wang, Y., & Li, X. (2021) · Composites Part B Engineering · doi:10.1016/j.compositesb.2021.108918 · Cited by 100 · see citing works

Advanced 3D imaging and organoid bioprinting for biomedical research and therapeutic applications

Maharjan, S., Ma, C., Singh, B., Kang, H., Orive, G., Yao, J., & Zhang, Y. S. (2024) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2024.115237 · Cited by 105 · see citing works

Commercialization and regulation of regenerative medicine products: Promises, advances and challenges

Beheshtizadeh, N., Gharibshahian, M., Pazhouhnia, Z., Rostami, M., Zangi, A. R., Maleki, R., Azar, H. K., Zalouli, V., Rajavand, H., Farzin, A., et al. (2022) · Biomedicine & Pharmacotherapy · doi:10.1016/j.biopha.2022.113431 · Cited by 96 · see citing works

Review of Low-Cost 3D Bioprinters: State of the Market and Observed Future Trends

Tong, A., Pham, Q. L., Abatemarco, P., Mathew, A., Gupta, D., Iyer, S., & Voronov, R. S. (2021) · SLAS TECHNOLOGY · doi:10.1177/24726303211020297 · Cited by 95 · see citing works

3D Bioprinting Photo-Crosslinkable Hydrogels for Bone and Cartilage Repair

Mei, Q., Rao, J., Bei, H., Liu, Y., & Zhao, X. (2021) · International Journal of Bioprinting · doi:10.18063/ijb.v7i3.367 · Cited by 96 · see citing works

Exploiting the role of nanoparticles for use in hydrogel-based bioprinting applications: concept, design, and recent advances

Chakraborty, A., Roy, A., Ravi, S. P., & Paul, A. (2021) · Biomaterials Science · doi:10.1039/d1bm00605c · Cited by 95 · see citing works

Bioprinting of Complex Multicellular Organs with Advanced Functionality—Recent Progress and Challenges Ahead

Bertassoni, L. E. (2021) · Advanced Materials · doi:10.1002/adma.202101321 · Cited by 96 · see citing works

3D bioprinting for fabricating artificial skin tissue

Gao, C., Lü, C., Jian, Z., Zhang, T., Chen, Z., Zhu, Q., Tai, Z., & Liu, Y. (2021) · Colloids and Surfaces B Biointerfaces · doi:10.1016/j.colsurfb.2021.112041 · Cited by 91 · see citing works

Tailoring bioinks of extrusion-based bioprinting for cutaneous wound healing

Wang, Y., Yuan, X., Yao, B., Zhu, S., Zhu, P., & Huang, S. (2022) · Bioactive Materials · doi:10.1016/j.bioactmat.2022.01.024 · Cited by 89 · see citing works

3D-bioprinted GelMA-gelatin-hydroxyapatite osteoblast-laden composite hydrogels for bone tissue engineering

Allen, N. B., Abar, B. M., Johnson, L. G., Burbano, J., Danilkowicz, R. M., & Adams, S. B. (2022) · Bioprinting · doi:10.1016/j.bprint.2022.e00196 · Cited by 90 · see citing works

Advanced Bioresponsive Multitasking Hydrogels in the New Era of Biomedicine

Niazi, M., Alizadeh, E., Zarebkohan, A., Seidi, K., Ayoubi‐Joshaghani, M. H., Azizi, M., Dadashi, H., Mahmudi, H., Javaheri, T., Jaymand, M., et al. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202104123 · Cited by 87 · see citing works

Embedded Bioprinting of Breast Tumor Cells and Organoids Using Low‐Concentration Collagen‐Based Bioinks

Shi, W., Mirza, S., Kuss, M. A., Liu, B., Hartin, A., Wan, S., Kong, Y., Mohapatra, B. C., Krishnan, M. A., Band, H., et al. (2023) · Advanced Healthcare Materials · doi:10.1002/adhm.202300905 · Cited by 87 · see citing works

Advances in 3D bioprinting for regenerative medicine applications

Loukelis, K., Koutsomarkos, N., Mikos, A. G., & Chatzinikolaidou, Μ. (2024) · Regenerative Biomaterials · doi:10.1093/rb/rbae033 · Cited by 88 · see citing works

Recent advances in additive manufacturing of patient-specific devices for dental and maxillofacial rehabilitation

Kouhi, M., Araújo, I. J. D. S., Asa’ad, F., Zeenat, L., Bojedla, S. S. R., Pati, F., Zolfagharian, A., Watts, D. C., Bottino, M. C., & Bodaghi, M. (2024) · Dental Materials · doi:10.1016/j.dental.2024.02.006 · Cited by 80 · see citing works

3D bioprinting of a cell-laden antibacterial polysaccharide hydrogel composite

Rastin, H., Ramezanpour, M., Hassan, K., Mazinani, A., Tùng, T. T., Vreugde, S., & Lošić, D. (2021) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2021.117989 · Cited by 78 · see citing works

Double – network hydrogel based on exopolysaccharides as a biomimetic extracellular matrix to augment articular cartilage regeneration

Cai, Z., Tang, Y., Wei, Y. Z., Wang, P., & Zhang, H. (2022) · Acta Biomaterialia · doi:10.1016/j.actbio.2022.08.062 · Cited by 78 · see citing works

4D printing: a cutting-edge platform for biomedical applications

Naniz, M. A., Askari, M., Zolfagharian, A., Naniz, M. A., & Bodaghi, M. (2022) · Biomedical Materials · doi:10.1088/1748-605x/ac8e42 · Cited by 76 · see citing works

Applying extrusion-based 3D printing technique accelerates fabricating complex biphasic calcium phosphate-based scaffolds for bone tissue regeneration

Beheshtizadeh, N., Azami, M., Abbasi, H. R., & Farzin, A. (2021) · Journal of Advanced Research · doi:10.1016/j.jare.2021.12.012 · Cited by 75 · see citing works

3D printing of lithium osteogenic bioactive composite scaffold for enhanced bone regeneration

Wang, W., Wei, J., Lei, D., Wang, S., Zhang, B., Shang, S., Bai, B., Zhao, C., Zhang, W., Zhou, C., et al. (2023) · Composites Part B Engineering · doi:10.1016/j.compositesb.2023.110641 · Cited by 75 · see citing works

4D printing for minimally invasive biomedical applications: programmable smart materials for deployable devices, drug delivery, and tissue regeneration

Yousefi, M. A., Rahmatabadi, D., Ahmadi, M., Bayati, A., Baniassadi, M., Laachachi, A., Silberschmidt, V. V., George, D., & Baghani, M. (2026) · Materials & Design · doi:10.1016/j.matdes.2026.115555 · Cited by 74 · see citing works

Fabrication and properties of PLA/nano-HA composite scaffolds with balanced mechanical properties and biological functions for bone tissue engineering application

Wang, W., Zhang, B., Zhao, L., Li, M., Han, Y., Wang, L., Zhang, Z., Li, J., Zhou, C., & Liu, L. (2021) · Nanotechnology Reviews · doi:10.1515/ntrev-2021-0083 · Cited by 71 · see citing works

Recent development in multizonal scaffolds for osteochondral regeneration

Yu, L., Cavelier, S., Hannon, B., & Wei, M. (2023) · Bioactive Materials · doi:10.1016/j.bioactmat.2023.01.012 · Cited by 66 · see citing works

Extrusion 3D printing with Pectin-based ink formulations: Recent trends in tissue engineering and food manufacturing

Agarwal, T., Costantini, M., & Maiti, T. K. (2021) · Biomedical Engineering Advances · doi:10.1016/j.bea.2021.100018 · Cited by 57 · see citing works

Stem Cell-Laden Hydrogel-Based 3D Bioprinting for Bone and Cartilage Tissue Engineering

Yang, Z., Yi, P., Liu, Z., Zhang, W., Mei, L., Feng, C., Tu, C., & Li, Z. (2022) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2022.865770 · Cited by 67 · see citing works

3D bioprinting of integral ADSCs-NO hydrogel scaffolds to promote severe burn wound healing

Wu, Y., Liang, T., Hu, Y., Jiang, S., Luo, Y., Liu, C., Wang, G., Zhang, J., Xu, T., & Zhu, L. (2021) · Regenerative Biomaterials · doi:10.1093/rb/rbab014 · Cited by 64 · see citing works

3D coaxial bioprinting: process mechanisms, bioinks and applications

Mohan, T. S., Datta, P., Nesaei, S., Özbolat, V., & Ozbolat, I. T. (2022) · Progress in Biomedical Engineering · doi:10.1088/2516-1091/ac631c · Cited by 64 · see citing works

Design, fabrication, and characterization of 3D-printed ABS and PLA scaffolds potentially for tissue engineering

Rahatuzzaman, M., Mahmud, M., Rahman, S., & Hoque, M. E. (2023) · Results in Engineering · doi:10.1016/j.rineng.2023.101685 · Cited by 63 · see citing works

Magnetorheological elastomer‐based 4D printed electroactive composite actuators

Dezaki, M. L., & Bodaghi, M. (2022) · Sensors and Actuators A Physical · doi:10.1016/j.sna.2022.114063 · Cited by 62 · see citing works

Advanced strategies in the application of gelatin-based bioink for extrusion bioprinting

Yang, J., He, H., Li, D., Zhang, Q., Xu, L., & Ruan, C. (2023) · Bio-Design and Manufacturing · doi:10.1007/s42242-023-00236-4 · Cited by 64 · see citing works

Cellular Interaction of Human Skin Cells towards Natural Bioink via 3D-Bioprinting Technologies for Chronic Wound: A Comprehensive Review

Masri, S., Mazlan, Z., Zulkiflee, I., Salleh, A., Fadilah, N. I. M., Maarof, M., Wen, A. P. Y., Duman, F., Tabata, Y., Aziz, I. A., et al. (2022) · International Journal of Molecular Sciences · doi:10.3390/ijms23010476 · Cited by 61 · see citing works

Biomaterial inks for extrusion-based 3D bioprinting: Property, classification, modification, and selection

Li, X., Zheng, F., Wang, X., Geng, X., Zhao, S., Liu, H., Dou, D., Leng, Y., Wang, L., & Yubo, F. (2022) · International Journal of Bioprinting · doi:10.18063/ijb.v9i2.649 · Cited by 62 · see citing works

Custom Shoe Sole Design and Modeling Toward 3D Printing

Zolfagharian, A., Lakhi, M., Ranjbar, S., & Bodaghi, M. (2021) · International Journal of Bioprinting · doi:10.18063/ijb.v7i4.396 · Cited by 60 · see citing works

Insights into the present and future of cartilage regeneration and joint repair

Evenbratt, H., Andréasson, L., Bicknell, V., Brittberg, M., Mobini, R., & Simonsson, S. (2022) · Cell Regeneration · doi:10.1186/s13619-021-00104-5 · Cited by 59 · see citing works

Engineering multiscale structural orders for high-fidelity embryoids and organoids

Shao, Y., & Fu, J. (2022) · Cell stem cell · doi:10.1016/j.stem.2022.04.003 · Cited by 56 · see citing works

Stem Cells and Extrusion 3D Printing for Hyaline Cartilage Engineering

Messaoudi, O., Henrionnet, C., Bourge, K., Lœuille, D., Gillet, P., & Pinzano, A. (2020) · Cells · doi:10.3390/cells10010002 · Cited by 58 · see citing works

Stimuli-responsive biomaterials: smart avenue toward 4D bioprinting

Rahimnejad, M., Jahangiri, S., Kiadeh, S. Z. H., Rezvaninejad, S., Ahmadi, Z., Ahmadi, S., Safarkhani, M., & Rabiee, N. (2023) · Critical Reviews in Biotechnology · doi:10.1080/07388551.2023.2213398 · Cited by 61 · see citing works

Image-based assessment and machine learning-enabled prediction of printability of polysaccharides-based food ink for 3D printing

Lu, Y., Rai, R., & Nitin, N. (2023) · Food Research International · doi:10.1016/j.foodres.2023.113384 · Cited by 57 · see citing works

Eco-friendly TPU/PLA Blends for Application as Shape-Memory 3D Printing Filaments

Shin, E. J., Jung, Y. S., Park, C. H., & Lee, S. (2023) · Journal of Polymers and the Environment · doi:10.1007/s10924-023-02799-w · Cited by 57 · see citing works

Application of Hydrogels as Three-Dimensional Bioprinting Ink for Tissue Engineering

Xie, M., Su, J., Zhou, S., Li, J., & Zhang, K. (2023) · Gels · doi:10.3390/gels9020088 · Cited by 55 · see citing works

A Review of Recent Manufacturing Technologies for Sustainable Soft Actuators

Dezaki, M. L., & Bodaghi, M. (2023) · International Journal of Precision Engineering and Manufacturing-Green Technology · doi:10.1007/s40684-023-00533-4 · Cited by 55 · see citing works

3D Bioprinting of Biomimetic Bilayered Scaffold Consisting of Decellularized Extracellular Matrix and Silk Fibroin for Osteochondral Repair

Zhang, X., Liu, Y., Zuo, Q., Wang, Q., Li, Z., Yan, K., Yuan, T., Zhang, Y., Shen, K., Xie, R., et al. (2021) · International Journal of Bioprinting · doi:10.18063/ijb.v7i4.401 · Cited by 54 · see citing works

3D Printing of Extracellular Matrix‐Based Multicomponent, All‐Natural, Highly Elastic, and Functional Materials toward Vascular Tissue Engineering

Işık, M., Karakaya, E., Arslan, T. S., Atila, D., Erdoğan, Y. K., Arslan, Y. E., Eskizengin, H., Eylem, C. C., Nemutlu, E., Ercan, B., et al. (2023) · Advanced Healthcare Materials · doi:10.1002/adhm.202203044 · Cited by 52 · see citing works

Functional microfluidics: theory, microfabrication, and applications

Xie, M., Zhan, Z., Li, Y., Zhao, J., Zhang, C., Wang, Z., & Wang, Z. (2024) · International Journal of Extreme Manufacturing · doi:10.1088/2631-7990/ad2c5f · Cited by 55 · see citing works

Inorganic biomaterials‐based bioinks for three‐dimensional bioprinting of regenerative scaffolds

Qin, C., & Wu, C. (2022) · Open Research (University of Surrey) · doi:10.1002/viw.20210018 · Cited by 51 · see citing works

3D printed osteochondral scaffolds: design strategies, present applications and future perspectives

Liu, G., Wei, X., Zhai, Y., Zhang, J., Li, J., Zhao, Z., Guan, T., & Zhao, D. (2024) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2024.1339916 · Cited by 51 · see citing works

Tethered TGF-β1 in a Hyaluronic Acid-Based Bioink for Bioprinting Cartilaginous Tissues

Hauptstein, J., Forster, L., Nadernezhad, A., Gröll, J., Teßmar, J., & Blunk, T. (2022) · International Journal of Molecular Sciences · doi:10.3390/ijms23020924 · Cited by 50 · see citing works

Piezoelectric nanocomposite bioink and ultrasound stimulation modulate early skeletal myogenesis

Paci, C., Iberite, F., Arrico, L., Vannozzi, L., Parlanti, P., Gemmi, M., & Ricotti, L. (2022) · Biomaterials Science · doi:10.1039/d1bm01853a · Cited by 48 · see citing works

3D printed heterogeneous hybrid hydrogel scaffolds for sequential tumor photothermal-chemotherapy and wound healing

Xu, L., Chen, Y., Zhang, P., Tang, J., Xue, Y., Luo, H., Dai, R., Jin, J., & Liu, J. (2022) · Biomaterials Science · doi:10.1039/d2bm00903j · Cited by 48 · see citing works

Collagen–Hyaluronic Acid Composite Hydrogels with Applications for Chronic Diabetic Wound Repair

Liang, M., Dong, L., Guo, Z., Liu, L., Fan, Z., Wei, C., Mi, S., & Sun, W. (2023) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.3c00695 · Cited by 48 · see citing works

3D bioprinting in tissue engineering: current state-of-the-art and challenges towards system standardization and clinical translation

Agarwal, T., Onesto, V., Banerjee, D., Guo, S., Polini, A., Vogt, C. D., Viswanath, A., Esworthy, T. J., Cui, H., O'Donnell, A., et al. (2025) · Biofabrication · doi:10.1088/1758-5090/ade47a · Cited by 64 · see citing works

Design of 3D Additively Manufactured Hybrid Structures for Cranioplasty

Santis, R. D., Russo, T., Rau, J. V., Papallo, I., Martorelli, M., & Gloria, A. (2021) · Materials · doi:10.3390/ma14010181 · Cited by 48 · see citing works

Wound and Skin Healing in Space: The 3D Bioprinting Perspective

Mateo, N. C., & Gelinsky, M. (2021) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2021.720217 · Cited by 48 · see citing works

Persuasive factors on the bioink printability and cell viability in the extrusion-based 3D bioprinting for tissue regeneration applications

Krishna, D. V., & Sankar, M. R. (2023) · Engineered Regeneration · doi:10.1016/j.engreg.2023.07.002 · Cited by 47 · see citing works

In Situ Bioprinting: Process, Bioinks, and Applications

Jain, P., Kathuria, H., Ramakrishna, S., Parab, S., Pandey, M. M., & Dubey, N. (2024) · ACS Applied Bio Materials · doi:10.1021/acsabm.3c01303 · Cited by 47 · see citing works

3D skin models along with skin-on-a-chip systems: A critical review

Sun, W., Liu, Z., Xu, J., Cheng, Y., Yin, R., Ma, L., Li, H., Qian, X. H., & Zhang, H. (2022) · Chinese Chemical Letters · doi:10.1016/j.cclet.2022.107819 · Cited by 46 · see citing works

Additive manufacturing for biomedical applications: a review on classification, energy consumption, and its appreciable role since COVID-19 pandemic

Rehman, M., Wang, Y., Mushtaq, R. T., Ishfaq, K., Zahoor, S., Ahmed, A., Kumar, M. S., Gueye, T., Rahman, M. M., & Sultana, J. (2022) · Progress in Additive Manufacturing · doi:10.1007/s40964-022-00373-9 · Cited by 45 · see citing works

Biologically Enhanced Starch Bio‐Ink for Promoting 3D Cell Growth

Zhuang, P., Greenberg, Z., & He, M. (2021) · Advanced Materials Technologies · doi:10.1002/admt.202100551 · Cited by 44 · see citing works

Constructing biomimetic liver models through biomaterials and vasculature engineering

Lv, W., Zhou, H., Aazmi, A., Yu, M., Xu, X., Yang, H., Huang, Y. Y. S., & Ma, L. (2022) · Regenerative Biomaterials · doi:10.1093/rb/rbac079 · Cited by 45 · see citing works

The fabrication of the chitosan-based bioink for in vitro tissue repair and regeneration: A review

Zhang, X., Feng, C., Islam, M. R., & Li, H. (2023) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2023.128504 · Cited by 42 · see citing works

Tissue regeneration properties of hydrogels derived from biological macromolecules: A review

Kesharwani, P., Alexander, A., Shukla, R., Jain, S., Bisht, A., Kumari, K., Verma, K., & Sharma, S. K. (2024) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2024.132280 · Cited by 43 · see citing works

3-D bioprinted human-derived skin organoids accelerate full-thickness skin defects repair

Zhang, T., Sheng, S., Cai, W., Yang, H., Li, J., Niu, L., Chen, W., Zhang, X., Zhou, Q., Gao, C., et al. (2024) · Bioactive Materials · doi:10.1016/j.bioactmat.2024.08.036 · Cited by 42 · see citing works

Biomaterial inks and bioinks for fabricating 3D biomimetic lung tissue: A delicate balancing act between biocompatibility and mechanical printability

Karamchand, L., Makeiff, D., Gao, Y., Azyat, K., Serpe, M. J., & Kulka, M. (2022) · Bioprinting · doi:10.1016/j.bprint.2022.e00255 · Cited by 43 · see citing works

Gelatin Methacryloyl Hydrogels for Musculoskeletal Tissue Regeneration

Kim, Y., Dawson, J. I., Oreffo, R. O. C., Tabata, Y., Kumar, D., Aparicio, C., & Mutreja, I. (2022) · Bioengineering · doi:10.3390/bioengineering9070332 · Cited by 40 · see citing works

An overview of latest advances in exploring bioactive peptide hydrogels for neural tissue engineering

Sharma, P., Pal, V. K., & Roy, S. (2021) · Biomaterials Science · doi:10.1039/d0bm02049d · Cited by 40 · see citing works

3D Printing Polymer-based Bolus Used for Radiotherapy

Lu, Y., Song, J., Yao, X., An, M., Shi, Q., & Huang, X. (2021) · International Journal of Bioprinting · doi:10.18063/ijb.v7i4.414 · Cited by 38 · see citing works

Osteochondral Tissue Engineering: Scaffold Materials, Fabrication Techniques and Applications

Wang, Z., Xu, J., Zhu, J., Fang, H., Lei, W., Qu, X., Cheng, Y. Y., Li, X., Guan, Y., Wang, H., et al. (2025) · Biotechnology Journal · doi:10.1002/biot.202400699 · Cited by 37 · see citing works

Extrusion based bioprinting of alginate based multicomponent hydrogels for tissue regeneration applications: State of the art

Krishna, D. V., & Sankar, M. R. (2023) · Materials Today Communications · doi:10.1016/j.mtcomm.2023.105696 · Cited by 37 · see citing works

Functional materials of 3D bioprinting for wound dressings and skin tissue engineering applications: A review

Fang, H., Xu, J., Ma, H., Liu, J., Xing, E., Cheng, Y. Y., Wang, H., Nie, Y., Pan, B., & Song, K. (2023) · International Journal of Bioprinting · doi:10.18063/ijb.757 · Cited by 36 · see citing works

The effect of near-infrared light-assisted photothermal therapy combined with polymer materials on promoting bone regeneration: A systematic review

Wang, S., Wang, F., Zhao, X. R., Yang, F., Xu, Y., Yan, F., Xia, D., & Liu, Y. (2022) · Materials & Design · doi:10.1016/j.matdes.2022.110621 · Cited by 36 · see citing works

A review of biomacromolecule-based 3D bioprinting strategies for structure-function integrated repair of skin tissues

Liu, H., Xing, F., Yu, P., Zhe, M., Duan, X., Liu, M., Xiang, Z., & Ritz, U. (2024) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2024.131623 · Cited by 35 · see citing works

Review 3D-Printed hydrogels for tissue engineering: a review

Su, C.-M., Lee, J., Shie, M., Chen, H.-K., Chang, Y., Ruciyanti, F., Wibawa, L. D., Faradilla, Alfarisi, M. A., Chen, Y., et al. (2026) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2026.1851399 · Cited by 2 · see citing works

3D Bioprinting Employing Hydrogels for Tissue Engineering: Innovations, Challenges, and Regulatory Frontiers

Patel, P. S., Pandey, G., Kumar, A., Misra, S. K., Roy, S., Awasthi, D. A., Wagh, S. S., Srivastava, S., & Kapoor, A. (2026) · Biomedical Materials & Devices · doi:10.1007/s44174-026-00671-8 · Cited by 4 · see citing works

A brief review of extrusion‐based tissue scaffold bio‐printing

Ning, L., & Chen, D. (2017) · Biotechnology Journal · doi:10.1002/biot.201600671 · Cited by 253 · see citing works

3D extrusion bioprinting: rational bioink design and advanced fabrication techniques

Jergitsch, M., & Mateos‐Timoneda, M. A. (2025) · Trends in biotechnology · doi:10.1016/j.tibtech.2025.06.008 · Cited by 19 · see citing works

Effects of hydrogel properties and extrusion parameters on 3D bioprinting

Ersumo, N. T., & Spiller, K. L. (2015) · Annual Northeast Biomedical Engineering Conference · doi:10.1109/nebec.2015.7117090 · Cited by 5 · see citing works