The DOI matches its Crossref record; 51 of the 51 references it cites were found in a registry or an index.
Extraction and evaluation of melt pool, plume and spatter information for powder-bed fusion AM process monitoring
Abstract
Abstract With the continuous development of additive manufacturing technique, the issue on built quality has caught increasing attentions. To improve the quality of built parts, the process monitoring and control has been emphasized as a promising solution. Despite a large number of studies on the development of sensors and instrumentations, the investigation on statistical analysis, modelling and automatic anomalies detection is still at an infant stage. To advance the related research, the intelligent classification methods, support vector machines (SVM) and convolutional neural network (CNN), were proposed for quality level identification in this work. A vision system with high speed camera was used for process images acquisition. The features of different objects including melt pool, plume and spatter were extracted based on the AM process understanding. The corresponding feature vectors were used as the input for the SVM classification. The results indicated the information from different objects is sensitive to different types of quality anomalies. Moreover, the combination of features from these three objects can significantly improve the classification accuracy to 90.1%. Additionally, the comparison between SVM and CNN was also conducted, the high accuracy of 92.7% for the CNN model demonstrated that it is a promising method for quality level identification by using the vision system.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
ImageNet classification with deep convolutional neural networks
Krizhevsky, A., Sutskever, I., & Hinton, G. E. (2017) · Communications of the ACM · doi:10.1145/3065386 · Cited by 112,155
LeCun, Y., Bengio, Y., & Hinton, G. (2015) · Nature · doi:10.1038/nature14539 · Cited by 84,126
A comparison of methods for multiclass support vector machines
Hsu, C.-W., & Lin, C.-J. (2002) · IEEE Transactions on Neural Networks · doi:10.1109/72.991427 · Cited by 6,838
A Practical Guide to Support Vector Classication
Hsu, C., Chang, C.-C., & Lin, C. (2008) · Cited by 5,046
Khairallah, S. A., Anderson, A. T., Rubenchik, A., & King, W. E. (2016) · Acta Materialia · doi:10.1016/j.actamat.2016.02.014 · Cited by 2,766
A Review on Basic Data-Driven Approaches for Industrial Process Monitoring
Yin, S., Ding, S. X., Xie, X., & Luo, H. (2014) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2014.2301773 · Cited by 1,716
Review of in-situ process monitoring and in-situ metrology for metal additive manufacturing
Everton, S. K., Hirsch, M., Stravroulakis, P., Leach, R. K., & Clare, A. T. (2016) · Materials & Design · doi:10.1016/j.matdes.2016.01.099 · Cited by 1,469
Chen, F.-C., & Jahanshahi, M. R. (2018) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2017.2764844 · Cited by 930
Process defects and in situ monitoring methods in metal powder bed fusion: a review
Grasso, M., & Colosimo, B. M. (2017) · Measurement Science and Technology · doi:10.1088/1361-6501/aa5c4f · Cited by 833
Denudation of metal powder layers in laser powder bed fusion processes
Matthews, M. J., Guss, G., Khairallah, S. A., Rubenchik, A. M., Depond, P. J., & King, W. E. (2016) · Acta Materialia · doi:10.1016/j.actamat.2016.05.017 · Cited by 809
Zhao, C., Fezzaa, K., Cunningham, R. W., Wen, H., De Carlo, F., Chen, L., Rollett, A. D., & Sun, T. (2017) · Scientific Reports · doi:10.1038/s41598-017-03761-2 · Cited by 758
Condition monitoring and fault diagnosis of planetary gearboxes: A review
Lei, Y., Lin, J., Zuo, M. J., & He, Z. (2014) · Measurement · doi:10.1016/j.measurement.2013.11.012 · Cited by 731
A Review on Process Monitoring and Control in Metal-Based Additive Manufacturing
Tapia, G., & Elwany, A. (2014) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.4028540 · Cited by 711
PCA-Based Feature Selection Scheme for Machine Defect Classification
Malhi, A., & Gao, R. X. (2004) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2004.834070 · Cited by 579
Weimer, D., Scholz-Reiter, B., & Shpitalni, M. (2016) · CIRP Annals · doi:10.1016/j.cirp.2016.04.072 · Cited by 577
Fluid and particle dynamics in laser powder bed fusion
Bidare, P., Bitharas, I., Ward, R. M., Attallah, M. M., & Moore, A. J. (2018) · Acta Materialia · doi:10.1016/j.actamat.2017.09.051 · Cited by 555
Ly, S., Rubenchik, A. M., Khairallah, S. A., Guss, G. M., & Matthews, M. J. (2017) · Scientific Reports · doi:10.1038/s41598-017-04237-z · Cited by 521
In-process sensing in selective laser melting (SLM) additive manufacturing
Spears, T. G., & Gold, S. A. (2016) · Integrating Materials and Manufacturing Innovation · doi:10.1186/s40192-016-0045-4 · Cited by 495
Scime, L., & Beuth, J. (2018) · Additive Manufacturing · doi:10.1016/j.addma.2017.11.009 · Cited by 489
Clijsters, S., Craeghs, T., Buls, S., Kempen, K., & Kruth, J.-P. (2014) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-014-6214-8 · Cited by 437
Shevchik, S. A., Kenel, C., Leinenbach, C., & Wasmer, K. (2018) · Additive Manufacturing · doi:10.1016/j.addma.2017.11.012 · Cited by 403
Feature Selection Using Principal Component Analysis
Song, F., Guo, Z., & Mei, D. (2010) · 2010 International Conference on System Science, Engineering Design and Manufacturing Informatization · doi:10.1109/icsem.2010.14 · Cited by 384
Yin, Z., & Hou, J. (2016) · Neurocomputing · doi:10.1016/j.neucom.2015.09.081 · Cited by 345
Gunenthiram, V., Peyre, P., Schneider, M., Dal, M., Coste, F., Koutiri, I., & Fabbro, R. (2017) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2017.08.012 · Cited by 345
WPD-PCA-Based Laser Welding Process Monitoring and Defects Diagnosis by Using FNN and SVM
You, D., Gao, X., & Katayama, S. (2015) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2014.2319216 · Cited by 271
Mani, M., Lane, B., Donmez, A., Feng, S., Moylan, S., & Fesperman, R. (2015) · doi:10.6028/nist.ir.8036 · Cited by 242
Grasso, M., Demir, A. G., Previtali, B., & Colosimo, B. M. (2018) · Robotics and Computer-Integrated Manufacturing · doi:10.1016/j.rcim.2017.07.001 · Cited by 231
Malekipour, E., & El-Mounayri, H. (2018) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-017-1172-6 · Cited by 230
Grasso, M., Laguzza, V., Semeraro, Q., & Colosimo, B. M. (2017) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.4034715 · Cited by 224
Design of an Optical system for the In Situ Process Monitoring of Selective Laser Melting (SLM)
Lott, P., Schleifenbaum, H., Meiners, W., Wissenbach, K., Hinke, C., & Bültmann, J. (2011) · Physics Procedia · doi:10.1016/j.phpro.2011.03.085 · Cited by 211
Deep learning for infrared thermal image based machine health monitoring
Janssens, O., Van de Walle, R., Loccufier, M., & Van Hoecke, S. (2018) · IEEE/ASME Transactions on Mechatronics · doi:10.1109/tmech.2017.2722479 · Cited by 207
Process monitoring and inspection systems in metal additive manufacturing: Status and applications
Chua, Z. Y., Ahn, I. H., & Moon, S. K. (2017) · International Journal of Precision Engineering and Manufacturing-Green Technology · doi:10.1007/s40684-017-0029-7 · Cited by 207
On the use of spatter signature for in-situ monitoring of Laser Powder Bed Fusion
Repossini, G., Laguzza, V., Grasso, M., & Colosimo, B. M. (2017) · Additive Manufacturing · doi:10.1016/j.addma.2017.05.004 · Cited by 206
In situ morphology-based defect detection of selective laser melting through inline coherent imaging
Kanko, J. A., Sibley, A. P., & Fraser, J. M. (2016) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2015.12.024 · Cited by 197
Determination of geometrical factors in Layerwise Laser Melting using optical process monitoring
Craeghs, T., Clijsters, S., Yasa, E., Bechmann, F., Berumen, S., & Kruth, J.-P. (2011) · Optics and Lasers in Engineering · doi:10.1016/j.optlaseng.2011.06.016 · Cited by 187
Mani, M., Feng, S., Brandon, L., Donmez, A., Moylan, S., & Fesperman, R. (2017) · Additive Manufacturing Handbook · doi:10.1201/9781315119106-34 · Cited by 181
Flaw detection in powder bed fusion using optical imaging
Abdelrahman, M., Reutzel, E. W., Nassar, A. R., & Starr, T. L. (2017) · Additive manufacturing · doi:10.1016/j.addma.2017.02.001 · Cited by 176
Thermographic measurements of the commercial laser powder bed fusion process at NIST
Lane, B., Moylan, S., Whitenton, E. P., & Ma, L. (2016) · Rapid Prototyping Journal · doi:10.1108/rpj-11-2015-0161 · Cited by 175
SVM and PCA based fault classification approaches for complicated industrial process
Jing, C., & Hou, J. (2015) · Neurocomputing · doi:10.1016/j.neucom.2015.03.082 · Cited by 165
Temperature Profile and Imaging Analysis of Laser Additive Manufacturing of Stainless Steel
Islam, M. D. S., Purtonen, T., Piili, H., Salminen, A., & Nyrhilä, O. (2013) · Physics Procedia · doi:10.1016/j.phpro.2013.03.156 · Cited by 156
Multi-sensor data fusion framework for CNC machining monitoring
Duro, J. A., Padget, J. A., Bowen, C., Kim, H. A., & Nassehi, A. (2015) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2015.04.019 · Cited by 141
Spatially resolved acoustic spectroscopy for selective laser melting
Smith, R. J., Hirsch, M., Patel, R., Li, W., Clare, A. T., & Sharples, S. D. (2016) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2016.05.005 · Cited by 139
Rodriguez, E., Mireles, J., Terrazas, C. A., Espalin, D., Perez, M. A., & Wicker, R. B. (2015) · Additive manufacturing · doi:10.1016/j.addma.2014.12.001 · Cited by 136
Zhang, Z., & Chen, S. (2014) · Journal of Intelligent Manufacturing · doi:10.1007/s10845-014-0971-y · Cited by 110
Improved principal component analysis for anomaly detection: Application to an emergency department
Harrou, F., Kadri, F., Chaabane, S., Tahón, C., & Sun, Y. (2015) · Computers & Industrial Engineering · doi:10.1016/j.cie.2015.06.020 · Cited by 101
An open-architecture metal powder bed fusion system for in-situ process measurements
Bidare, P., Maier, R. R. J., Beck, R. J., Shephard, J. D., & Moore, A. J. (2017) · Additive manufacturing · doi:10.1016/j.addma.2017.06.007 · Cited by 91
Ultrasonic online monitoring of additive manufacturing processes based on selective laser melting
Rieder, H., Dillhöfer, A., Spies, M., Bamberg, J., & Hess, T. (2015) · AIP conference proceedings · doi:10.1063/1.4914609 · Cited by 77
Kriczky, D. A., Irwin, J., Reutzel, E. W., Michaleris, P., Nassar, A. R., & Craig, J. E. (2015) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2015.02.021 · Cited by 75
Yang, D., Li, H., Hu, Y., Zhao, J., Xiao, H., & Lan, Y. (2016) · Renewable Energy · doi:10.1016/j.renene.2016.01.099 · Cited by 64
Fox, J. C., Lane, B. M., & Yeung, H. (2017) · Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE · doi:10.1117/12.2263863 · Cited by 47
Transfer learning in recognition of drill wear using convolutional neural network
Kurek, J., Wieczorek, G., Kruk, B. S. M., et al. (2017) · International Conference on Computational Problems of Electrical Engineering (CPEE) · doi:10.1109/cpee.2017.8093087 · Cited by 29
Cited by
Machine learning in additive manufacturing: State-of-the-art and perspectives
Wang, C., Tan, X. P., Tor, S. B., & Lim, C. S. (2020) · Additive Manufacturing · doi:10.1016/j.addma.2020.101538 · Cited by 693
A review on machine learning in 3D printing: applications, potential, and challenges
Goh, G. D., Sing, S. L., & Yeong, W. Y. (2021) · Artificial Intelligence Review · doi:10.1007/s10462-020-09876-9 · Cited by 652
Qi, X., Chen, G., Li, Y., Cheng, X., & Li, C. (2019) · Engineering · doi:10.1016/j.eng.2019.04.012 · Cited by 529
Defects and anomalies in powder bed fusion metal additive manufacturing
Mostafaei, A., Zhao, C., He, Y., Reza Ghiaasiaan, S., Shi, B., Shao, S., Shamsaei, N., Wu, Z., Kouraytem, N., Sun, T., et al. (2022) · Current Opinion in Solid State and Materials Science · doi:10.1016/j.cossms.2021.100974 · Cited by 491
Machine Learning in Additive Manufacturing: A Review
Meng, L., McWilliams, B., Jarosinski, W., Park, H.-Y., Jung, Y.-G., Lee, J., & Zhang, J. (2020) · JOM · doi:10.1007/s11837-020-04155-y · Cited by 470
Metadata
- Authors
- Zhang, Y., Hong, G. S., Ye, D., Zhu, K., & Fuh, J. Y. H.
- Venue
- Materials & Design
- Publisher
- Elsevier BV
- Published
- 2018-10
- Volume
- 156
- Pages
- 458-469
- ISSN
- 0264-1275 (ISSN-L)
- OpenAlex
- W2809775572
- Cited by
- 335
- References
- 51
- FWCI
- 13.11
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.