The DOI matches its Crossref record; 156 of the 156 references it cites were found in a registry or an index.
Nanolattices: An Emerging Class of Mechanical Metamaterials
Open accessAbstract
In 1903, Alexander Graham Bell developed a design principle to generate lightweight, mechanically robust lattice structures based on triangular cells; this has since found broad application in lightweight design. Over one hundred years later, the same principle is being used in the fabrication of nanolattice materials, namely lattice structures composed of nanoscale constituents. Taking advantage of the size‐dependent properties typical of nanoparticles, nanowires, and thin films, nanolattices redefine the limits of the accessible material‐property space throughout different disciplines. Herein, the exceptional mechanical performance of nanolattices, including their ultrahigh strength, damage tolerance, and stiffness, are reviewed, and their potential for multifunctional applications beyond mechanics is examined. The efficient integration of architecture and size‐affected properties is key to further develop nanolattices. The introduction of a hierarchical architecture is an effective tool in enhancing mechanical properties, and the eventual goal of nanolattice design may be to replicate the intricate hierarchies and functionalities observed in biological materials. Additive manufacturing and self‐assembly techniques enable lattice design at the nanoscale; the scaling‐up of nanolattice fabrication is currently the major challenge to their widespread use in technological applications.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Measurement of the Elastic Properties and Intrinsic Strength of Monolayer Graphene
Lee, C., Wei, X., Kysar, J. W., & Hone, J. (2008) · Science · doi:10.1126/science.1157996 · Cited by 20,847
Superior Thermal Conductivity of Single-Layer Graphene
Balandin, A. A., Ghosh, S., Bao, W., Calizo, I., Teweldebrhan, D., Miao, F., & Lau, C. N. (2008) · Nano Letters · doi:10.1021/nl0731872 · Cited by 13,823
VI. The phenomena of rupture and flow in solids
Griffith, A. A. (1921) · Philosophical Transactions of the Royal Society of London. Series A, Containing Papers of a Mathematical or Physical Character · doi:10.1098/rsta.1921.0006 · Cited by 11,052
Cellular solids structure and properties
Gibson, L. J., Ashby, M. F., et al. (1997) · Cited by 9,172
The Deformation and Ageing of Mild Steel: III Discussion of Results
Hall, E. O. (1951) · Proceedings of the Physical Society. Section B · doi:10.1088/0370-1301/64/9/303 · Cited by 7,872
Whitesides, G. M., & Grzybowski, B. (2002) · Science · doi:10.1126/science.1070821 · Cited by 7,439
Cellular solids: Structure and properties
Wolcott, M. P. (1990) · Materials Science and Engineering: A · doi:10.1016/0921-5093(90)90295-e · Cited by 5,926
Atomic Layer Deposition: An Overview
George, S. M. (2010) · Chemical Reviews · doi:10.1021/cr900056b · Cited by 5,814
Locally Resonant Sonic Materials
Liu, Z., Zhang, X., Mao, Y., Zhu, Y. Y., Yang, Z., Chan, C. T., & Sheng, P. (2000) · Science · doi:10.1126/science.289.5485.1734 · Cited by 5,464
New Directions for Low‐Dimensional Thermoelectric Materials
Dresselhaus, M. S., Chen, G., Tang, M. Y., Yang, R. G., Lee, H., Wang, D. Z., Ren, Z. F., Fleurial, J. ‐., & Gogna, P. (2007) · Advanced Materials · doi:10.1002/adma.200600527 · Cited by 4,033
Cited by
Mechanical metamaterials and beyond
Jiao, P., Mueller, J., Raney, J. R., Zheng, X., & Alavi, A. H. (2023) · Nature Communications · doi:10.1038/s41467-023-41679-8 · Cited by 733
Self-citationReview of additive manufacturing technologies and applications in the aerospace industry
Najmon, J. C., Raeisi, S., & Tovar, A. (2019) · Additive Manufacturing for the Aerospace Industry · doi:10.1016/b978-0-12-814062-8.00002-9 · Cited by 719
Scalable submicrometer additive manufacturing
Saha, S. K., Wang, D., Nguyen, V. H., Chang, Y., Oakdale, J. S., & Chen, S.-C. (2019) · Science · doi:10.1126/science.aax8760 · Cited by 513
Additive manufacturing of metamaterials: A review
Askari, M., Hutchins, D. A., Thomas, P. J., Astolfi, L., Watson, R. L., Abdi, M., Ricci, M., Laureti, S., Nie, L., Freear, S., et al. (2020) · Additive Manufacturing · doi:10.1016/j.addma.2020.101562 · Cited by 470
Inverse-designed spinodoid metamaterials
Kumar, S., Tan, S., Zheng, L., & Kochmann, D. M. (2020) · npj Computational Materials · doi:10.1038/s41524-020-0341-6 · Cited by 444
Metadata
- Authors
- Bauer, J., Meza, L. R., Schaedler, T. A., Schwaiger, R., Zheng, X., & Valdevit, L.
- Venue
- Advanced Materials
- Publisher
- Wiley
- Published
- 2017-09-05
- Volume
- 29
- Issue
- 40
- ISSN
- 0935-9648 (ISSN-L)
- 1521-4095
- OpenAlex
- W2627046073
- Cited by
- 592
- References
- 156
- FWCI
- 29.33
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Nanolattices: An Emerging Class of Mechanical Metamaterials. https://app.cochat.ai/papers/10.1002/adma.201701850
- The paper
- Bauer, J., Meza, L. R., Schaedler, T. A., Schwaiger, R., Zheng, X., & Valdevit, L. (2017). Nanolattices: An Emerging Class of Mechanical Metamaterials. Advanced Materials. https://doi.org/10.1002/adma.201701850
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.
