The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Towards a high strength aluminium alloy development methodology for selective laser melting
Open accessAbstract
Selective Laser Melting (SLM) has received tremendous attentions due to its high degree of flexibility for the design and fabrication of geometrically complex parts. However, the majority of the currently applied metals for this advanced technology are still based on the traditional weldable and/or castable alloys, and the resulting mechanical properties of SLM fabricated samples are often mediocre. This is because the conventional alloys are not designed to accommodate the dynamic metallurgical characteristics of the SLM process and the benefits offered by SLM are not fully captured. In this study, an experimentally-based novel alloy development methodology utilising wedge mould casting and laser remelting is proposed, and the processability and properties of the developed alloys can be predicted for SLM. By mimicking the high solidification rate of the SLM process, unconventionally large amounts of solute were successfully placed into solution in the aluminium (Al) matrix. A high strength Al-Mn-Sc based alloy has been successfully developed and verified by SLM processing. The developed alloy possessed an average yield strength of about 430 MPa and a ductility of 21% in the as fabricated state, compared to approximately 570 MPa and 18% after direct ageing for 5 h at 300 °C, respectively.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Additive manufacturing of metallic components – Process, structure and properties
DebRoy, T., Wei, H. L., Zuback, J. S., Mukherjee, T., Elmer, J. W., Milewski, J. O., Beese, A. M., Wilson-Heid, A., De, A., & Zhang, W. (2018) · Progress in Materials Science · doi:10.1016/j.pmatsci.2017.10.001 · Cited by 8,805
Cited by
Aboulkhair, N. T., Simonelli, M., Parry, L., Ashcroft, I., Tuck, C., & Hague, R. (2019) · Progress in Materials Science · doi:10.1016/j.pmatsci.2019.100578 · Cited by 1,552
Heat treatment for metal additive manufacturing
Laleh, M., Sadeghi, E., Revilla, R. I., Chao, Q., Haghdadi, N., Hughes, A. E., Xu, W., De Graeve, I., Qian, M., Gibson, I., et al. (2023) · Progress in Materials Science · doi:10.1016/j.pmatsci.2022.101051 · Cited by 538
Alloy design via additive manufacturing: Advantages, challenges, applications and perspectives
Bandyopadhyay, A., Traxel, K. D., Lang, M., Juhasz, M., Eliaz, N., & Bose, S. (2022) · Materials Today · doi:10.1016/j.mattod.2021.11.026 · Cited by 347
Review of high-strength aluminium alloys for additive manufacturing by laser powder bed fusion
Rometsch, P. A., Zhu, Y., Wu, X., & Huang, A. (2022) · Materials & Design · doi:10.1016/j.matdes.2022.110779 · Cited by 330
Self-citationThermal Stability of Aluminum Alloys
Czerwinski, F. (2020) · Materials · doi:10.3390/ma13153441 · Cited by 291
“An attempt is shown in Figure 31, where novel Al−Mn−Sc alloys ere evaluated by selective laser melting [142].”
BackgroundMethodInfluential
Metadata
- Authors
- Jia, Q., Rometsch, P., Cao, S., Zhang, K., & Wu, X.
- Venue
- Materials & Design
- Publisher
- Elsevier BV
- Published
- 2019-07
- Volume
- 174
- Pages
- 107775
- ISSN
- 0264-1275 (ISSN-L)
- OpenAlex
- W2928591853
- Cited by
- 159
- References
- 1
- FWCI
- 10.75
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Towards a high strength aluminium alloy development methodology for selective laser melting. https://app.cochat.ai/papers/10.1016/j.matdes.2019.107775
- The paper
- Jia, Q., Rometsch, P., Cao, S., Zhang, K., & Wu, X. (2019). Towards a high strength aluminium alloy development methodology for selective laser melting. Materials & Design. https://doi.org/10.1016/j.matdes.2019.107775
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.