The DOI matches its Crossref record; 34 of the 34 references it cites were found in a registry or an index.
Defect characteristics and analysis of their variability in metal L-PBF additive manufacturing
Open accessAbstract
Additive manufacturing (AM) has provided an opportunity for fabricating complex parts. Fabricating these parts without defects is currently a challenge. Therefore, understanding AM defects is fundamental to the structural integrity of load carrying components, failure analysis, and defect-based modeling of mechanical performance. This work investigates defect content of metal AM specimens and correlations between defect characteristics (size, sphericity/circularity, aspect ratio) using 2D and 3D defect characterization techniques. Distributions of defect characteristics based on location throughout AM specimens were analyzed and the variabilities of defect characteristics within these specimens were studied. Laser-Based Power Bed Fusion (L-PBF) specimens manufactured with different metals, different AM machines and built directions, different surface conditions, and different thicknesses were evaluated. Significant variability in defect characteristics based on location, especially in as-built surface specimens was observed. Well-optimized process parameters and post-processing reduced the overall volume fraction of defects, and the specified variabilities, and resulted in a more random dispersion of defects around the specimens. 2D and 3D defect analysis showed similar trends regarding correlations between defect characteristics and provided complementary information about the actual defect content based on their resolution.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Annual Book of ASTM Standards 2003
Riyanto, L. (2003) · Cited by 5,334
Leuders, S., Thöne, M., Riemer, A., Niendorf, T., Tröster, T., Richard, H. A., & Maier, H. J. (2013) · International Journal of Fatigue · doi:10.1016/j.ijfatigue.2012.11.011 · Cited by 1,475
King, W. E., Anderson, A. T., Ferencz, R. M., Hodge, N. E., Kamath, C., Khairallah, S. A., & Rubenchik, A. M. (2015) · Applied Physics Reviews · doi:10.1063/1.4937809 · Cited by 1,258
Xu, W., Brandt, M., Sun, S., Elambasseril, J., Liu, Q., Latham, K., Xia, K., & Qian, M. (2015) · Acta Materialia · doi:10.1016/j.actamat.2014.11.028 · Cited by 1,245
Mechanical behavior of additive manufactured, powder-bed laser-fused materials
Mower, T. M., & Long, M. J. (2016) · Materials Science and Engineering: A · doi:10.1016/j.msea.2015.10.068 · Cited by 1,001
Rafi, H. K., Karthik, N. V., Gong, H., Starr, T. L., & Stucker, B. E. (2013) · Journal of Materials Engineering and Performance · doi:10.1007/s11665-013-0658-0 · Cited by 987
Selective laser melting of biocompatible metals for rapid manufacturing of medical parts
Vandenbroucke, B., & Kruth, J. (2007) · Rapid Prototyping Journal · doi:10.1108/13552540710776142 · Cited by 981
Gong, H., Rafi, K., Gu, H., Janaki Ram, G. D., Starr, T., & Stucker, B. (2015) · Materials & Design · doi:10.1016/j.matdes.2015.07.147 · Cited by 940
Cornillot, J. L., & Milligan, S. P. (2016) · Cited by 894
Fatigue performance evaluation of selective laser melted Ti–6Al–4V
Edwards, P., & Ramulu, M. (2014) · Materials Science and Engineering: A · doi:10.1016/j.msea.2014.01.041 · Cited by 874
Cited by
Metal additive manufacturing in aerospace: A review
Blakey-Milner, B., Gradl, P., Snedden, G., Brooks, M., Pitot, J., Lopez, E., Leary, M., Berto, F., & du Plessis, A. (2021) · Materials & Design · doi:10.1016/j.matdes.2021.110008 · Cited by 2,263
Sanaei, N., & Fatemi, A. (2021) · Progress in Materials Science · doi:10.1016/j.pmatsci.2020.100724 · Cited by 1,029
Self-citationBenedetti, M., du Plessis, A., Ritchie, R. O., Dallago, M., Razavi, N., & Berto, F. (2021) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2021.100606 · Cited by 788
du Plessis, A., Yadroitsava, I., & Yadroitsev, I. (2020) · Materials & Design · doi:10.1016/j.matdes.2019.108385 · Cited by 712
Properties and applications of additively manufactured metallic cellular materials: A review
du Plessis, A., Razavi, N., Benedetti, M., Murchio, S., Leary, M., Watson, M., Bhate, D., & Berto, F. (2022) · Progress in Materials Science · doi:10.1016/j.pmatsci.2021.100918 · Cited by 623
Metadata
- Authors
- Sanaei, N., Fatemi, A., & Phan, N.
- Venue
- Materials & Design
- Publisher
- Elsevier BV
- Published
- 2019-11
- Volume
- 182
- Pages
- 108091
- ISSN
- 0264-1275 (ISSN-L)
- OpenAlex
- W2965169693
- Cited by
- 301
- References
- 34
- FWCI
- 16.05
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Defect characteristics and analysis of their variability in metal L-PBF additive manufacturing. https://app.cochat.ai/papers/10.1016/j.matdes.2019.108091
- The paper
- Sanaei, N., Fatemi, A., & Phan, N. (2019). Defect characteristics and analysis of their variability in metal L-PBF additive manufacturing. Materials & Design. https://doi.org/10.1016/j.matdes.2019.108091
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.