The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
A review of critical repeatability and reproducibility issues in powder bed fusion
Open accessAbstract
Due to the many advantages associated with metal additive manufacturing (AM) processes, research into these technologies has grown significantly over the last number of years. However, repeatability and reproducibility are critical issues in AM when compared to traditional manufacturing processes. This work reviews the current state of repeatability/reproducibility in metal additive manufacturing, specifically in powder bed fusion technologies such as selective laser melting (SLM) and electron beam melting (EBM). The repeatability issues present in these AM processes is shown to be pervasive across the available literature. The additive manufacturing process is separated into pre-process, para-process and post-process stages and a critical review of the causes and impact of repeatability found at these stages is conducted. Key parameters of these stages: powder properties, laser characteristics and post-processing are studied in depth as sources of variation that can diminish repeatability. An understanding of the limitations of analysing repeatability from the current literature is developed and areas for further research towards the improvement of repeatability are identified.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Metal Additive Manufacturing: A Review
Frazier, W. E. (2014) · Journal of Materials Engineering and Performance · doi:10.1007/s11665-014-0958-z · Cited by 5,984
Process defects and in situ monitoring methods in metal powder bed fusion: a review
Grasso, M., & Colosimo, B. M. (2017) · Measurement Science and Technology · doi:10.1088/1361-6501/aa5c4f · Cited by 833
Cited by
Making sustainable aluminum by recycling scrap: The science of “dirty” alloys
Raabe, D., Ponge, D., Uggowitzer, P. J., Roscher, M., Paolantonio, M., Liu, C., Antrekowitsch, H., Kozeschnik, E., Seidmann, D., Gault, B., et al. (2022) · Progress in Materials Science · doi:10.1016/j.pmatsci.2022.100947 · Cited by 626
Chen, L.-Y., Liang, S.-X., Liu, Y., & Zhang, L.-C. (2021) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2021.100648 · Cited by 603
An overview of modern metal additive manufacturing technology
Armstrong, M., Mehrabi, H., & Naveed, N. (2022) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2022.10.060 · Cited by 549
Kumar, S., Gopi, T., Harikeerthana, N., Gupta, M. K., Gaur, V., Krolczyk, G. M., & Wu, C. (2023) · Journal of Intelligent Manufacturing · doi:10.1007/s10845-022-02029-5 · Cited by 328
Post-Process Treatments for Additive-Manufactured Metallic Structures: A Comprehensive Review
Ge, J., Pillay, S., & Ning, H. (2023) · Journal of Materials Engineering and Performance · doi:10.1007/s11665-023-08051-9 · Cited by 157
Metadata
- Authors
- Dowling, L., Kennedy, J., O'Shaughnessy, S., & Trimble, D.
- Venue
- Materials & Design
- Publisher
- Elsevier BV
- Published
- 2020-01
- Volume
- 186
- Pages
- 108346
- ISSN
- 0264-1275 (ISSN-L)
- OpenAlex
- W2985674265
- Cited by
- 215
- References
- 2
- FWCI
- 13.40
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: A review of critical repeatability and reproducibility issues in powder bed fusion. https://app.cochat.ai/papers/10.1016/j.matdes.2019.108346
- The paper
- Dowling, L., Kennedy, J., O'Shaughnessy, S., & Trimble, D. (2020). A review of critical repeatability and reproducibility issues in powder bed fusion. Materials & Design. https://doi.org/10.1016/j.matdes.2019.108346
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.