The DOI matches its Crossref record; 143 of the 143 references it cites were found in a registry or an index.
Towards better Li metal anodes: Challenges and strategies
Abstract
Abstract Anode materials are key components of batteries that significantly impact their specific energy and power. Li metal is considered as the ultimate anode due to its high theoretical capacity (∼3860 mA h/g) and low redox potential (−3.04 V vs. standard hydrogen electrode). Specifically, rechargeable Li metal batteries (LMBs) with enabled safety promise to surpass the energy density of current Li-ion batteries. Unfortunately, the apparently inevitable growth of dendritic Li, electrolyte consumption, the severe volume changes and the connected potential safety risks of LMBs limit their practical application. Recent strategies based on manipulation of electrolyte chemistry, interface engineering, and structure modification of Li host have reportedly achieved improvement. At the moment, the trend is to move towards all-solid-state LMBs. However, there are serious challenges in terms of low ionic conductivity, poor interfacial contact, and sluggish kinetics. While there are excellent reviews available, this review emphasizes problems and provides additional insight in advanced strategies for stabilizing Li metal anodes in liquid, polymer, ceramic and composite electrolytes. New approaches and novel materials to overcome the above challenges are referred. This review aims at raising relevant questions and outlining future strategies for next-generation high-energy storage systems.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Issues and challenges facing rechargeable lithium batteries
Tarascon, J.-M., & Armand, M. (2001) · Nature · doi:10.1038/35104644 · Cited by 21,130
Armand, M., & Tarascon, J.-M. (2008) · Nature · doi:10.1038/451652a · Cited by 19,612
Li-O2 and Li-S batteries with high energy storage
Bruce, P. G., Freunberger, S. A., Hardwick, L. J., & Tarascon, J.-M. (2012) · Nature Materials · doi:10.1038/nmat3191 · Cited by 9,479
Li-ion battery materials: present and future
Nitta, N., Wu, F., Lee, J. T., & Yushin, G. (2015) · Materials Today · doi:10.1016/j.mattod.2014.10.040 · Cited by 7,389
Honeycomb Carbon: A Review of Graphene
Allen, M. J., Tung, V. C., & Kaner, R. B. (2010) · Chemical Reviews · doi:10.1021/cr900070d · Cited by 6,998
Reviving the lithium metal anode for high-energy batteries
Lin, D., Liu, Y., & Cui, Y. (2017) · Nature Nanotechnology · doi:10.1038/nnano.2017.16 · Cited by 6,763
Toward Safe Lithium Metal Anode in Rechargeable Batteries: A Review
Cheng, X.-B., Zhang, R., Zhao, C.-Z., & Zhang, Q. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.7b00115 · Cited by 6,197
Lithium metal anodes for rechargeable batteries
Xu, W., Wang, J., Ding, F., Chen, X., Nasybulin, E., Zhang, Y., & Zhang, J.-G. (2014) · Energy Environ. Sci. · doi:10.1039/c3ee40795k · Cited by 4,704
Self-citationLithium battery chemistries enabled by solid-state electrolytes
Manthiram, A., Yu, X., & Wang, S. (2017) · Nature Reviews Materials · doi:10.1038/natrevmats.2016.103 · Cited by 4,689
A solid future for battery development
Janek, J., & Zeier, W. G. (2016) · Nature Energy · doi:10.1038/nenergy.2016.141 · Cited by 3,979
Cited by
Graphite as anode materials: Fundamental mechanism, recent progress and advances
Zhang, H., Yang, Y., Ren, D., Wang, L., & He, X. (2021) · Energy Storage Materials · doi:10.1016/j.ensm.2020.12.027 · Cited by 1,011
Physicochemical Concepts of the Lithium Metal Anode in Solid-State Batteries
Krauskopf, T., Richter, F. H., Zeier, W. G., & Janek, J. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00431 · Cited by 892
Towards practical lithium-metal anodes
Zhang, X., Yang, Y., & Zhou, Z. (2020) · Chemical Society Reviews · doi:10.1039/c9cs00838a · Cited by 726
Balancing interfacial reactions to achieve long cycle life in high-energy lithium metal batteries
Niu, C., Liu, D., Lochala, J. A., Anderson, C. S., Cao, X., Gross, M. E., Xu, W., Zhang, J.-G., Whittingham, M. S., Xiao, J., et al. (2021) · Nature Energy · doi:10.1038/s41560-021-00852-3 · Cited by 588
Thermodynamic Understanding of Li-Dendrite Formation
Gao, X., Zhou, Y.-N., Han, D., Zhou, J., Zhou, D., Tang, W., & Goodenough, J. B. (2020) · Joule · doi:10.1016/j.joule.2020.06.016 · Cited by 537
Confronting the Challenges in Lithium Anodes for Lithium Metal Batteries
Wang, Q., Liu, B., Shen, Y., Wu, J., Zhao, Z., Zhong, C., & Hu, W. (2021) · Advanced Science · doi:10.1002/advs.202101111 · Cited by 531
Lithium‐Metal Batteries: From Fundamental Research to Industrialization
Kim, S., Park, G., Lee, S. J., Seo, S., Ryu, K., Kim, C. H., & Choi, J. W. (2023) · Advanced Materials · doi:10.1002/adma.202206625 · Cited by 416
Toward Practical High-Energy and High-Power Lithium Battery Anodes: Present and Future
Wang, C., Yang, C., & Zheng, Z. (2022) · Advanced Science · doi:10.1002/advs.202105213 · Cited by 337
Electrode potential influences the reversibility of lithium-metal anodes
Ko, S., Obukata, T., Shimada, T., Takenaka, N., Nakayama, M., Yamada, A., & Yamada, Y. (2022) · Nature Energy · doi:10.1038/s41560-022-01144-0 · Cited by 319
Ionic liquids for high performance lithium metal batteries
Liu, K., Wang, Z., Shi, L., Jungsuttiwong, S., & Yuan, S. (2021) · Journal of Energy Chemistry · doi:10.1016/j.jechem.2020.11.017 · Cited by 317
Status and challenges facing representative anode materials for rechargeable lithium batteries
Zhang, L., Zhu, C., Yu, S., Ge, D., & Zhou, H. (2022) · Journal of Energy Chemistry · doi:10.1016/j.jechem.2021.08.001 · Cited by 314
Advances in the Design of 3D‐Structured Electrode Materials for Lithium‐Metal Anodes
Park, S., Jin, H., & Yun, Y. S. (2020) · Advanced Materials · doi:10.1002/adma.202002193 · Cited by 301
Multiscale Understanding and Architecture Design of High Energy/Power Lithium‐Ion Battery Electrodes
Zhang, X., Ju, Z., Zhu, Y., Takeuchi, K. J., Takeuchi, E. S., Marschilok, A. C., & Yu, G. (2021) · Advanced Energy Materials · doi:10.1002/aenm.202000808 · Cited by 299
Decoupling the origins of irreversible coulombic efficiency in anode-free lithium metal batteries
Huang, C.-J., Thirumalraj, B., Tao, H.-C., Shitaw, K. N., Sutiono, H., Hagos, T. T., Beyene, T. T., Kuo, L.-M., Wang, C.-C., Wu, S.-H., et al. (2021) · Nature Communications · doi:10.1038/s41467-021-21683-6 · Cited by 287
Electroless Formation of a Fluorinated Li/Na Hybrid Interphase for Robust Lithium Anodes
Wang, Y., Liu, F., Fan, G., Qiu, X., Liu, J., Yan, Z., Zhang, K., Cheng, F., & Chen, J. (2021) · Journal of the American Chemical Society · doi:10.1021/jacs.0c12051 · Cited by 283
Transition metal chalcogenide anodes for sodium storage
Ali, Z., Zhang, T., Asif, M., Zhao, L., Yu, Y., & Hou, Y. (2020) · Materials Today · doi:10.1016/j.mattod.2019.11.008 · Cited by 280
How Does External Pressure Shape Li Dendrites in Li Metal Batteries?
Shen, X., Zhang, R., Shi, P., Chen, X., & Zhang, Q. (2021) · Advanced Energy Materials · doi:10.1002/aenm.202003416 · Cited by 279
Thenuwara, A. C., Shetty, P. P., Kondekar, N., Sandoval, S. E., Cavallaro, K., May, R., Yang, C.-T., Marbella, L. E., Qi, Y., & McDowell, M. T. (2020) · ACS Energy Letters · doi:10.1021/acsenergylett.0c01209 · Cited by 264
Polymer electrolytes and interfaces toward solid-state batteries: Recent advances and prospects
Wu, F., Zhang, K., Liu, Y., Gao, H., Bai, Y., Wang, X., & Wu, C. (2020) · Energy Storage Materials · doi:10.1016/j.ensm.2020.08.002 · Cited by 255
Xiang, Y., Lu, L., Kottapalli, A. G. P., & Pei, Y. (2022) · Carbon Energy · doi:10.1002/cey2.185 · Cited by 253
Metadata
- Authors
- Zhang, Y., Zuo, T.-T., Popovic, J., Lim, K., Yin, Y.-X., Maier, J., & Guo, Y.-G.
- Venue
- Materials Today
- Publisher
- Elsevier BV
- Published
- 2020-03
- Volume
- 33
- Pages
- 56-74
- ISSN
- 1369-7021 (ISSN-L)
- OpenAlex
- W2979220658
- Cited by
- 653
- References
- 143
- FWCI
- 25.38
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.