The DOI matches its Crossref record; 34 of the 34 references it cites were found in a registry or an index.
Local chemical fluctuation mediated ductility in body-centered-cubic high-entropy alloys
Abstract
Abstract High-entropy alloys (HEAs) open up a new horizon for discovering un-explored mechanical properties and deformation mechanisms. Local chemical fluctuations (LCFs) in HEAs were found to have significant influences on their mechanical performance, however, the underlying origins remain unclear. In this work, direct dynamic observation of the interaction between LCFs and dislocations was captured by in situ transmission electron microscopy in a ductile body-centered-cubic (BCC) HfNbTiZr HEA under loading. The observed dislocation pinning induced by LCFs contributes to the increment not only in the strength but also in the ductility due to strongly promoted dislocation interaction. The observed local double cross-slips caused by the LCFs distribute dislocations onto various atomic planes homogenously, which is also beneficial for ductilization in HfNbTiZr. Our findings not only shed light on the understanding of deformation mechanisms of HEAs, but also provide a new perspective to design ductile BCC HEAs.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Yeh, J. ‐., Chen, S. ‐., Lin, S. ‐., Gan, J. ‐., Chin, T. ‐., Shun, T. ‐., Tsau, C. ‐., & Chang, S. ‐. (2004) · Advanced Engineering Materials · doi:10.1002/adem.200300567 · Cited by 15,281
Double-slit photoelectron interference in strong-field ionization of the neon dimer
Kunitski, M., Eicke, N., Huber, P., Köhler, J., Zeller, S., Voigtsberger, J., Schlott, N., Henrichs, K., Sann, H., Trinter, F., et al. (2019) · Nature Communications · doi:10.1038/s41467-018-07882-8 · Cited by 8,162
Double-slit photoelectron interference in strong-field ionization of the neon dimer
Kunitski, M., Eicke, N., Huber, P., Köhler, J., Zeller, S., Voigtsberger, J., Schlott, N., Henrichs, K., Sann, H., Trinter, F., et al. (2019) · Institutional Repository of Leibniz Universität Hannover (Leibniz Universität Hannover) · doi:10.15488/5174 · Cited by 8,161
Microstructures and properties of high-entropy alloys
Zhang, Y., Zuo, T. T., Tang, Z., Gao, M. C., Dahmen, K. A., Liaw, P. K., & Lu, Z. P. (2014) · Progress in Materials Science · doi:10.1016/j.pmatsci.2013.10.001 · Cited by 7,128
Self-citationGeorge, E. P., Raabe, D., & Ritchie, R. O. (2019) · Nature Reviews Materials · doi:10.1038/s41578-019-0121-4 · Cited by 5,047
Metastable high-entropy dual-phase alloys overcome the strength–ductility trade-off
Li, Z., Pradeep, K. G., Deng, Y., Raabe, D., & Tasan, C. C. (2016) · Nature · doi:10.1038/nature17981 · Cited by 4,071
Mechanical properties of Nb25Mo25Ta25W25 and V20Nb20Mo20Ta20W20 refractory high entropy alloys
Senkov, O. N., Wilks, G. B., Scott, J. M., & Miracle, D. B. (2011) · Intermetallics · doi:10.1016/j.intermet.2011.01.004 · Cited by 3,239
High-entropy alloy: challenges and prospects
Ye, Y. F., Wang, Q., Lu, J., Liu, C. T., & Yang, Y. (2016) · Materials Today · doi:10.1016/j.mattod.2015.11.026 · Cited by 3,016
High entropy alloys: A focused review of mechanical properties and deformation mechanisms
George, E. P., Curtin, W. A., & Tasan, C. C. (2020) · Acta Materialia · doi:10.1016/j.actamat.2019.12.015 · Cited by 1,917
Enhanced strength and ductility in a high-entropy alloy via ordered oxygen complexes
Lei, Z., Liu, X., Wu, Y., Wang, H., Jiang, S., Wang, S., Hui, X., Wu, Y., Gault, B., Kontis, P., et al. (2018) · Nature · doi:10.1038/s41586-018-0685-y · Cited by 1,764
Self-citationTuning element distribution, structure and properties by composition in high-entropy alloys
Ding, Q., Zhang, Y., Chen, X., Fu, X., Chen, D., Chen, S., Gu, L., Wei, F., Bei, H., Gao, Y., et al. (2019) · Nature · doi:10.1038/s41586-019-1617-1 · Cited by 1,614
Short-range order and its impact on the CrCoNi medium-entropy alloy
Zhang, R., Zhao, S., Ding, J., Chong, Y., Jia, T., Ophus, C., Asta, M., Ritchie, R. O., & Minor, A. M. (2020) · Nature · doi:10.1038/s41586-020-2275-z · Cited by 1,279
Self-citationFracture and strength of solids
Orowan, E. (1949) · Reports on Progress in Physics · doi:10.1088/0034-4885/12/1/309 · Cited by 1,278
Strengthening Mechanisms in Crystal Plasticity
Argon, A. (2007) · Oxford University Press eBooks · doi:10.1093/acprof:oso/9780198516002.001.0001 · Cited by 920
Fracture and Strength of Solids
Tong, P., Zhang, T., & Kim, J. (1998) · Cited by 905
Hergenrother, C. W., Maleszewski, C. K., Nolan, M. C., Li, J.-Y., Drouet d’Aubigny, C. Y., Shelly, F. C., Howell, E. S., Kareta, T. R., Izawa, M. R. M., Barucci, M. A., et al. (2019) · Nature Communications · doi:10.1038/s41467-019-09213-x · Cited by 902
Nanoscale origins of the damage tolerance of the high-entropy alloy CrMnFeCoNi
Zhang, Z., Mao, M. M., Wang, J., Gludovatz, B., Zhang, Z., Mao, S. X., George, E. P., Yu, Q., & Ritchie, R. O. (2015) · Nature Communications · doi:10.1038/ncomms10143 · Cited by 845
Tunable stacking fault energies by tailoring local chemical order in CrCoNi medium-entropy alloys
Ding, J., Yu, Q., Asta, M., & Ritchie, R. O. (2018) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1808660115 · Cited by 845
Self-citationMore than entropy in high-entropy alloys: Forming solid solutions or amorphous phase
Guo, S., Hu, Q., Ng, C., & Liu, C. T. (2013) · Intermetallics · doi:10.1016/j.intermet.2013.05.002 · Cited by 800
Phase‐Transformation Ductilization of Brittle High‐Entropy Alloys via Metastability Engineering
Huang, H., Wu, Y., He, J., Wang, H., Liu, X., An, K., Wu, W., & Lu, Z. (2017) · Advanced Materials · doi:10.1002/adma.201701678 · Cited by 705
Self-citationSize-dependent plasticity in an Nb25Mo25Ta25W25 refractory high-entropy alloy
Zou, Y., Maiti, S., Steurer, W., & Spolenak, R. (2014) · Acta Materialia · doi:10.1016/j.actamat.2013.11.049 · Cited by 541
Structure and mechanical properties of a light-weight AlNbTiV high entropy alloy
Stepanov, N. D., Shaysultanov, D. G., Salishchev, G. A., & Tikhonovsky, M. A. (2015) · Materials Letters · doi:10.1016/j.matlet.2014.11.162 · Cited by 494
Microstructure and mechanical properties of refractory MoNbHfZrTi high-entropy alloy
Guo, N. N., Wang, L., Luo, L. S., Li, X. Z., Su, Y. Q., Guo, J. J., & Fu, H. Z. (2015) · Materials & Design · doi:10.1016/j.matdes.2015.05.019 · Cited by 426
Insights into the phase diagram of the CrMnFeCoNi high entropy alloy
Laurent-Brocq, M., Akhatova, A., Perrière, L., Chebini, S., Sauvage, X., Leroy, E., & Champion, Y. (2015) · Acta Materialia · doi:10.1016/j.actamat.2015.01.068 · Cited by 361
Dynamic transitions from smooth to rough to twinning in dislocation motion
Marian, J., Cai, W., & Bulatov, V. V. (2004) · Nature Materials · doi:10.1038/nmat1072 · Cited by 327
Theory of screw dislocation strengthening in random BCC alloys from dilute to “High-Entropy” alloys
Maresca, F., & Curtin, W. A. (2020) · Acta Materialia · doi:10.1016/j.actamat.2019.10.007 · Cited by 310
Unusual dislocation behavior in high-entropy alloys
Ma, E. (2020) · Scripta Materialia · doi:10.1016/j.scriptamat.2020.02.021 · Cited by 261
Chen, H., Kauffmann, A., Gorr, B., Schliephake, D., Seemüller, C., Wagner, J. N., Christ, H.-J., & Heilmaier, M. (2016) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2015.11.050 · Cited by 241
Chen, B., Li, S., Zong, H., Ding, X., Sun, J., & Ma, E. (2020) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1919136117 · Cited by 216
Novel metastable engineering in single-phase high-entropy alloy
Wang, R., Tang, Y., Li, S., Zhang, H., Ye, Y., Zhu, L., Ai, Y., & Bai, S. (2018) · Materials & Design · doi:10.1016/j.matdes.2018.11.052 · Cited by 89
Raabe, D., Li, Z., & Ponge, D. (2019) · MRS Bulletin · doi:10.1557/mrs.2019.72 · Cited by 78
Cui, Y., Po, G., Srivastava, P., Jiang, K., Gupta, V., & Ghoniem, N. M. (2019) · International Journal of Plasticity · doi:10.1016/j.ijplas.2019.08.008 · Cited by 59
The Gaussian distribution of lattice size and atomic level heterogeneity in high entropy alloys
Liu, S., & Wei, Y. (2016) · Extreme Mechanics Letters · doi:10.1016/j.eml.2016.10.007 · Cited by 43
Ruirui, H., Zhang, Q., Zhang, X., Li, J., Cao, T., Yao, J., Xue, Y., Gao, H., & Li, X. (2020) · Science China Technological Sciences · doi:10.1007/s11431-020-1660-8 · Cited by 25
Cited by
Yin, S., Zuo, Y., Abu-Odeh, A., Zheng, H., Li, X.-G., Ding, J., Ong, S. P., Asta, M., & Ritchie, R. O. (2021) · Nature Communications · doi:10.1038/s41467-021-25134-0 · Cited by 398
Self-citationWang, L., Ding, J., Chen, S., Jin, K., Zhang, Q., Cui, J., Wang, B., Chen, B., Li, T., Ren, Y., et al. (2023) · Nature Materials · doi:10.1038/s41563-023-01517-0 · Cited by 361
Self-citationNegative mixing enthalpy solid solutions deliver high strength and ductility
An, Z., Li, A., Mao, S., Yang, T., Zhu, L., Wang, R., Wu, Z., Zhang, B., Shao, R., Jiang, C., et al. (2024) · Nature · doi:10.1038/s41586-023-06894-9 · Cited by 316
Self-citationA review on the dynamic-mechanical behaviors of high-entropy alloys
Tang, Y., Wang, R., Xiao, B., Zhang, Z., Li, S., Qiao, J., Bai, S., Zhang, Y., & Liaw, P. K. (2023) · Progress in Materials Science · doi:10.1016/j.pmatsci.2023.101090 · Cited by 314
Metadata
- Authors
- Bu, Y., Wu, Y., Lei, Z., Yuan, X., Wu, H., Feng, X., Liu, J., Ding, J., Lu, Y., Wang, H., Lu, Z., & Yang, W.
- Venue
- Materials Today
- Publisher
- Elsevier BV
- Published
- 2021-06
- Volume
- 46
- Pages
- 28-34
- ISSN
- 1369-7021 (ISSN-L)
- OpenAlex
- W3156663674
- Cited by
- 278
- References
- 34
- FWCI
- 16.58
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.