CoChat

Highly porous PHB-based bioactive scaffolds for bone tissue engineering by in situ synthesis of hydroxyapatite

Open access
Degli Esposti, Micaela, Chiellini, Federica, Bondioli, Federica, Morselli, Davide, Fabbri, Paola · 2019 · Materials Science and Engineering: C
Cited by 140

The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.

Abstract

In this study bioactive and bioresorbable porous scaffolds for bone tissue regeneration, based on poly(3-hydroxybutyrate) (PHB), are presented. The porous structure is obtained by thermally induced phase separation (TIPS) technique, whereas the osteoinductivity and osteoconductivity are enhanced through the incorporation of hydroxyapatite (HA). The HA particles are generated in PHB using an innovative filler in situ synthesis, and the properties of the composite scaffolds are then compared to scaffolds obtained by conventional mechanical dispersion of ex situ synthesized HA particles. The in situ synthesis leads to composite materials with improved porosity, even at high filler content, without any degradation of the polymeric matrix as confirmed by GPC and DSC measurements. On the contrary, the samples prepared by ex situ method show a suppressed porosity by increasing the inorganic filler content, therefore limiting the amount of HA that can be loaded in PHB and the resulting bioactivity. The possibility to use PHB/HA porous composites as scaffolds for bone tissue regeneration, is assessed by preliminary cell viability in vitro studies. In particular, it is observed that the composites are fully cytocompatible and able to sustain MC3T3-E1 mouse pre-osteoblast cells adhesion and proliferation. Investigations on cell morphology reveal, for all PHB/HA scaffolds, the presence of differentiated cells with a predominance of osteocyte-like morphology, which are not observed for neat PHB scaffolds. Moreover, the MC3T3-E1 cells differentiation towards osteoblastic phenotype is further supported by the evaluation of the early osteogenic markers. In particular, samples loaded with HA in situ synthesized showed the highest ALP production and typical morphology of the terminal differentiation stages of osteoblasts.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1016/j.msec.2019.03.014

Cites

3 of 3 references verified0 citation errors · 0 not checkable

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Show all 3 references

Cited by

Metadata

Authors
Degli Esposti, M., Chiellini, F., Bondioli, F., Morselli, D., & Fabbri, P.
Venue
Materials Science and Engineering: C
Publisher
Elsevier BV
Published
2019-07
Volume
100
Pages
286-296
ISSN
0928-4931 (ISSN-L)
OpenAlex
W2919065458
Cited by
140
References
3
FWCI
6.30
Type
journal article
Language
en
Open access
green

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.