The DOI matches its Crossref record; 45 of the 45 references it cites were found in a registry or an index.
3D printed microneedle patches using stereolithography (SLA) for intradermal insulin delivery
Open accessAbstract
3D printed microneedle arrays were fabricated using a biocompatible resin through stereolithography (SLA) for transdermal insulin delivery. Microneedles were built by polymerising consecutive layers of a photopolymeric resin. Thin layers of insulin and sugar alcohol or disaccharide carriers were formed on the needle surface by inkjet printing. The optimization of the printing process resulted in superior skin penetration capacity of the 3D printed microneedles compared to metal arrays with minimum applied forces varying within the range of 2 to 5 N. Micro-CT analysis showed strong adhesion of the coated films on the microneedle surface even after penetration to the skin. In vivo animal trials revealed fast insulin action with excellent hypoglycaemia control and lower glucose levels achieved within 60 min, combined with steady state plasma glucose over 4 h compared to subcutaneous injections.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
1 retracted
RETRACTED: Trehalose induced structural modulation of Bovine Serum Albumin at ambient temperature
Das, A., Basak, P., Pattanayak, R., Kar, T., Majumder, R., Pal, D., Bhattacharya, A., Bhattacharyya, M., & Banik, S. P. (2017) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2017.07.074 · Cited by 32
RetractedSreerama, N., & Woody, R. W. (2000) · Analytical Biochemistry · doi:10.1006/abio.2000.4880 · Cited by 2,992
Whitmore, L., & Wallace, B. A. (2004) · Nucleic Acids Research · doi:10.1093/nar/gkh371 · Cited by 2,338
Whitmore, L., & Wallace, B. A. (2008) · Biopolymers · doi:10.1002/bip.20853 · Cited by 2,243
Alkilani, A., McCrudden, M. T., & Donnelly, R. (2015) · Pharmaceutics · doi:10.3390/pharmaceutics7040438 · Cited by 1,147
The stabilization of proteins by sucrose.
Lee, J. C., & Timasheff, S. N. (1981) · Journal of Biological Chemistry · doi:10.1016/s0021-9258(19)68947-7 · Cited by 1,112
Davis, S. P., Landis, B. J., Adams, Z. H., Allen, M. G., & Prausnitz, M. R. (2004) · Journal of Biomechanics · doi:10.1016/j.jbiomech.2003.12.010 · Cited by 934
Effect of trehalose on protein structure
Jain, N. K., & Roy, I. (2009) · Protein Science · doi:10.1002/pro.3 · Cited by 883
An infrared spectroscopic study of the interactions of carbohydrates with dried proteins
Carpenter, J. F., & Crowe, J. H. (1989) · Biochemistry · doi:10.1021/bi00435a044 · Cited by 758
Hydrogel‐Forming Microneedle Arrays for Enhanced Transdermal Drug Delivery
Donnelly, R. F., Singh, T. R. R., Garland, M. J., Migalska, K., Majithiya, R., McCrudden, C. M., Kole, P. L., Mahmood, T. M. T., McCarthy, H. O., & Woolfson, A. D. (2012) · Advanced Functional Materials · doi:10.1002/adfm.201200864 · Cited by 727
Scaffold development using 3D printing with a starch-based polymer
Lam, C. X. F., Mo, X. M., Teoh, S. H., & Hutmacher, D. W. (2002) · Materials Science and Engineering: C · doi:10.1016/s0928-4931(02)00012-7 · Cited by 614
Lack of Pain Associated with Microfabricated Microneedles
Kaushik, S., Hord, A. H., Denson, D. D., McAllister, D. V., Smitra, S., Allen, M. G., & Prausnitz, M. R. (2001) · Anesthesia & Analgesia · doi:10.1097/00000539-200102000-00041 · Cited by 576
Hollow Metal Microneedles for Insulin Delivery to Diabetic Rats
Davis, S. P., Martanto, W., Allen, M. G., & Prausnitz, M. R. (2005) · IEEE Transactions on Biomedical Engineering · doi:10.1109/tbme.2005.845240 · Cited by 406
Emerging Biofabrication Strategies for Engineering Complex Tissue Constructs
Pedde, R. D., Mirani, B., Navaei, A., Styan, T., Wong, S., Mehrali, M., Thakur, A., Mohtaram, N. K., Bayati, A., Dolatshahi‐Pirouz, A., et al. (2017) · Advanced Materials · doi:10.1002/adma.201606061 · Cited by 388
Recent advances of controlled drug delivery using microfluidic platforms
Sanjay, S. T., Zhou, W., Dou, M., Tavakoli, H., Ma, L., Xu, F., & Li, X. (2018) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2017.09.013 · Cited by 365
Microneedles permit transdermal delivery of a skin-impermeant medication to humans
Wermeling, D. P., Banks, S. L., Hudson, D. A., Gill, H. S., Gupta, J., Prausnitz, M. R., & Stinchcomb, A. L. (2008) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.0710355105 · Cited by 311
Liu, S., Jin, M.-N., Quan, Y.-S., Kamiyama, F., Katsumi, H., Sakane, T., & Yamamoto, A. (2012) · Journal of Controlled Release · doi:10.1016/j.jconrel.2012.05.030 · Cited by 310
Core–Shell Microneedle Gel for Self-Regulated Insulin Delivery
Wang, J., Ye, Y., Yu, J., Kahkoska, A. R., Zhang, X., Wang, C., Sun, W., Corder, R. D., Chen, Z., Khan, S. A., et al. (2018) · ACS Nano · doi:10.1021/acsnano.7b08152 · Cited by 299
Ling, M.-H., & Chen, M.-C. (2013) · Acta Biomaterialia · doi:10.1016/j.actbio.2013.06.029 · Cited by 280
3D printing applications for transdermal drug delivery
Economidou, S. N., Lamprou, D. A., & Douroumis, D. (2018) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2018.01.031 · Cited by 270
Self-citationPolymer microneedles fabricated from alginate and hyaluronate for transdermal delivery of insulin
Yu, W., Jiang, G., Zhang, Y., Liu, D., Xu, B., & Zhou, J. (2017) · Materials Science and Engineering: C · doi:10.1016/j.msec.2017.05.143 · Cited by 221
Inkjet printing of transdermal microneedles for the delivery of anticancer agents
Uddin, M. J., Scoutaris, N., Klepetsanis, P., Chowdhry, B., Prausnitz, M. R., & Douroumis, D. (2015) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2015.01.038 · Cited by 198
Self-citationZhang, Y., Jiang, G., Yu, W., Liu, D., & Xu, B. (2018) · Materials Science and Engineering: C · doi:10.1016/j.msec.2017.12.006 · Cited by 173
Probing insulin’s secondary structure after entrapment into alginate/chitosan nanoparticles
Sarmento, B., Ferreira, D. C., Jorgensen, L., & van de Weert, M. (2007) · European Journal of Pharmaceutics and Biopharmaceutics · doi:10.1016/j.ejpb.2006.09.005 · Cited by 166
Infusion pressure and pain during microneedle injection into skin of human subjects
Gupta, J., Park, S. S., Bondy, B. J., Felner, E. I., & Prausnitz, M. R. (2011) · Biomaterials · doi:10.1016/j.biomaterials.2011.05.061 · Cited by 159
Lu, Y., Mantha, S. N., Crowder, D. C., Chinchilla, S., Shah, K. N., Yun, Y., Wicker, R. B., & Choi, J.-W. (2015) · Biofabrication · doi:10.1088/1758-5090/7/4/045001 · Cited by 154
Laser Raman spectroscopy and the conformation of insulin and proinsulin
Yu, N., Liu, C. S., & O'Shea, D. C. (1972) · Journal of Molecular Biology · doi:10.1016/0022-2836(72)90167-2 · Cited by 146
Souillac, P. O., Middaugh, C. R., & Rytting, J. H. (2002) · International Journal of Pharmaceutics · doi:10.1016/s0378-5173(01)00987-5 · Cited by 121
FlexPen®: Addressing issues of confidence andconvenience in insulin delivery
Korytkowski, M. T., NISKANEN, L. K., & Asakura, T. (2005) · Clinical Therapeutics · doi:10.1016/j.clinthera.2005.11.019 · Cited by 120
Visscher, L. E., Dang, H. P., Knackstedt, M. A., Hutmacher, D. W., & Tran, P. A. (2018) · Materials Science and Engineering C · doi:10.1016/j.msec.2018.02.008 · Cited by 113
Inkjet printing of insulin microneedles for transdermal delivery
Ross, S. A., Scoutaris, N., Lamprou, D. A., Mallinson, D. J., & Douroumis, D. (2015) · Drug Delivery and Translational Research · doi:10.1007/s13346-015-0251-1 · Cited by 105
Self-citationMicroneedles As a Delivery System for Gene Therapy
Chen, W., Li, H., Shi, D., Liu, Z., & Yuan, W. (2016) · Frontiers in Pharmacology · doi:10.3389/fphar.2016.00137 · Cited by 89
Thavornyutikarn, B., Tesavibul, P., Sitthiseripratip, K., Chantarapanich, N., Feltis, B., Wright, P., & Turney, T. W. (2017) · Materials Science and Engineering C · doi:10.1016/j.msec.2017.03.001 · Cited by 88
Deposition of antimicrobial coatings on microstereolithography-fabricated microneedles
Gittard, S. D., Miller, P. R., Jin, C., Martin, T. N., Boehm, R. D., Chisholm, B. J., Stafslien, S. J., Daniels, J. W., Cilz, N., Monteiro-Riviere, N. A., et al. (2011) · JOM · doi:10.1007/s11837-011-0093-3 · Cited by 77
3D-printed membrane for guided tissue regeneration
Tayebi, L., Rasoulianboroujeni, M., Moharamzadeh, K., Almela, T., Cui, Z., & Ye, H. (2017) · Materials Science and Engineering C · doi:10.1016/j.msec.2017.11.027 · Cited by 71
Challenges and recent advances in the subcutaneous delivery of insulin
Guo, X., & Wang, W. (2016) · Expert Opinion on Drug Delivery · doi:10.1080/17425247.2016.1232247 · Cited by 64
Qiu, Y., Qin, G., Zhang, S., Wu, Y., Bai, X., & Gao, Y. (2012) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2012.07.035 · Cited by 56
Schiffter, H. A., Condliffe, J., & Vonhoff, S. (2010) · Journal of The Royal Society Interface · doi:10.1098/rsif.2010.0114.focus · Cited by 56
Digital micromirror device (DMD)-based 3D printing of poly(propylene fumarate) scaffolds
Mott, E. J., Busso, M., Luo, X., Dolder, C. K., Wang, M. O., Fisher, J. P., & Dean, D. (2015) · Materials Science and Engineering C · doi:10.1016/j.msec.2015.11.071 · Cited by 56
Yoshioka, S., Miyazaki, T., & Aso, Y. (2006) · Pharmaceutical Research · doi:10.1007/s11095-006-9907-3 · Cited by 51
Exendin-4–encapsulated dissolving microneedle arrays for efficient treatment of type 2 diabetes
Lahiji, S. F., Jang, Y., Huh, I., Yang, H., Jang, M., & Jung, H. (2018) · Scientific Reports · doi:10.1038/s41598-018-19789-x · Cited by 42
Andrade, F., Fonte, P., Oliva, M., Videira, M., Ferreira, D., & Sarmento, B. F. C. C. (2015) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2015.03.050 · Cited by 39
Zhang, Y., Ying-jie, D., Xueli, W., Xu, J., & Li, Z. (2008) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2008.12.018 · Cited by 32
Optical activity of insulin. II. Effect of nonaqueous solvents
Timasheff, S. N., Ettinger, M. J., & Strycharz, M. G. D. (1971) · Biochemistry · doi:10.1021/bi00781a016 · Cited by 24
Kim, Y. H., Sioutas, C., & Shing, K. S. (2008) · Pharmaceutical Research · doi:10.1007/s11095-008-9708-y · Cited by 23
Cited by
Connected healthcare: Improving patient care using digital health technologies
Awad, A., Trenfield, S. J., Pollard, T. D., Ong, J. J., Elbadawi, M., McCoubrey, L. E., Goyanes, A., Gaisford, S., & Basit, A. W. (2021) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2021.113958 · Cited by 405
Vat photopolymerization 3D printing for advanced drug delivery and medical device applications
Xu, X., Awad, A., Robles-Martinez, P., Gaisford, S., Goyanes, A., & Basit, A. W. (2021) · Journal of Controlled Release · doi:10.1016/j.jconrel.2020.10.008 · Cited by 370
Microneedles in Drug Delivery: Progress and Challenges
Avcil, M., & Çelik, A. (2021) · Micromachines · doi:10.3390/mi12111321 · Cited by 309
Hollow microneedles: A perspective in biomedical applications
Cárcamo-Martínez, Á., Mallon, B., Domínguez-Robles, J., Vora, L. K., Anjani, Q. K., & Donnelly, R. F. (2021) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2021.120455 · Cited by 285
Microneedle array systems for long-acting drug delivery
Vora, L. K., Moffatt, K., Tekko, I. A., Paredes, A. J., Volpe-Zanutto, F., Mishra, D., Peng, K., Raj Singh Thakur, R., & Donnelly, R. F. (2021) · European Journal of Pharmaceutics and Biopharmaceutics · doi:10.1016/j.ejpb.2020.12.006 · Cited by 270
Metadata
- Authors
- Economidou, S. N., Pere, C. P. P., Reid, A., Uddin, M. J., Windmill, J. F. C., Lamprou, D. A., & Douroumis, D.
- Venue
- Materials Science and Engineering: C
- Publisher
- Elsevier BV
- Published
- 2019-09
- Volume
- 102
- Pages
- 743-755
- ISSN
- 0928-4931 (ISSN-L)
- OpenAlex
- W2936156980
- Cited by
- 311
- References
- 45
- FWCI
- 10.80
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.