The DOI matches its Crossref record; 5 of the 5 references it cites were found in a registry or an index.
Ti3C2Tx MXene-graphene composite films for wearable strain sensors featured with high sensitivity and large range of linear response
Abstract
Abstract Strain sensors featured with high sensitivities and large ranges of linear responses are currently under urgent needs. Herein, we present a spontaneously formed Ti3C2Tx/graphene/PDMS layered structure, which can be divided into two layers when being stretched: a Ti3C2Tx dominated brittle upper layer and a flexible graphene/PDMS composite bottom layer. The balance between the destruction and maintenance of the conductive pathways through the synergetic motion of the upper and bottom layers ensure a high and steady gauge factor of the senor in a wide strain range (e.g., gauge factors of 190.8 and 1148.2 in strain ranges of 0–52.6% and 52.6–74.1%, respectively). The Ti3C2Tx/graphene/PDMS layered structure based strain sensor is also featured with a low detection limit (~0.025%), a high linearity (R2 > 0.98), a high cycling stability (over 5000 cycles), and an accurate monitoring of full-range human motions. Different breathing patterns in yoga are distinguished to demonstrate the practicability of the sensor.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Stretchable, Skin-Mountable, and Wearable Strain Sensors and Their Potential Applications: A Review
Amjadi, M., Kyung, K., Park, I., & Sitti, M. (2016) · Advanced Functional Materials · doi:10.1002/adfm.201504755 · Cited by 3,202
Highly Stretchable and Sensitive Strain Sensor Based on Silver Nanowire–Elastomer Nanocomposite
Amjadi, M., Pichitpajongkit, A., Lee, S., Ryu, S., & Park, I. (2014) · ACS Nano · doi:10.1021/nn501204t · Cited by 2,350
Sensitive, High-Strain, High-Rate Bodily Motion Sensors Based on Graphene–Rubber Composites
Boland, C. S., Khan, U., Backes, C., O’Neill, A., McCauley, J., Duane, S., Shanker, R., Liu, Y., Jurewicz, I., Dalton, A. B., et al. (2014) · ACS Nano · doi:10.1021/nn503454h · Cited by 793
Kim, K. K., Hong, S., Cho, H. M., Lee, J., Suh, Y. D., Ham, J., & Ko, S. H. (2015) · Nano Letters · doi:10.1021/acs.nanolett.5b01505 · Cited by 626
Ultrasensitive and Stretchable Strain Sensors Based on Mazelike Vertical Graphene Network
Wu, S., Peng, S., Han, Z. J., Zhu, H., & Wang, C. H. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b15848 · Cited by 144
Cited by
Ti3C2TX MXene for Sensing Applications: Recent Progress, Design Principles, and Future Perspectives
Pei, Y., Zhang, X., Hui, Z., Zhou, J., Huang, X., Sun, G., & Huang, W. (2021) · ACS Nano · doi:10.1021/acsnano.1c00248 · Cited by 799
Flexible MXene‐Based Composites for Wearable Devices
Ma, C., Ma, M., Si, C., Ji, X., & Wan, P. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202009524 · Cited by 544
Sensing with MXenes: Progress and Prospects
Ho, D. H., Choi, Y. Y., Jo, S. B., Myoung, J., & Cho, J. H. (2021) · Advanced Materials · doi:10.1002/adma.202005846 · Cited by 482
Ti3C2Tx MXene-Based Flexible Piezoresistive Physical Sensors
Wang, Y., Yue, Y., Cheng, F., Cheng, Y., Ge, B., Liu, N., & Gao, Y. (2022) · ACS Nano · doi:10.1021/acsnano.1c09925 · Cited by 406
Yong, B., Ma, D., Wang, Y., Mi, H., He, C., & Zhang, P. (2020) · Advanced Energy Materials · doi:10.1002/aenm.202002354 · Cited by 395
Metadata
- Authors
- Yang, Y., Cao, Z., He, P., Shi, L., Ding, G., Wang, R., & Sun, J.
- Venue
- Nano Energy
- Publisher
- Elsevier BV
- Published
- 2019-12
- Volume
- 66
- Pages
- 104134
- ISSN
- 2211-2855 (ISSN-L)
- OpenAlex
- W2978347758
- Cited by
- 229
- References
- 5
- FWCI
- 8.87
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Ti3C2Tx MXene-graphene composite films for wearable strain sensors featured with high sensitivity and large range of linear response. https://app.cochat.ai/papers/10.1016/j.nanoen.2019.104134
- The paper
- Yang, Y., Cao, Z., He, P., Shi, L., Ding, G., Wang, R., & Sun, J. (2019). Ti3C2Tx MXene-graphene composite films for wearable strain sensors featured with high sensitivity and large range of linear response. Nano Energy. https://doi.org/10.1016/j.nanoen.2019.104134
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.