The DOI matches its Crossref record; 129 of the 129 references it cites were found in a registry or an index.
Thermal energy storage: Recent developments and practical aspects
Open accessAbstract
Abstract Thermal energy storage (TES) transfers heat to storage media during the charging period, and releases it at a later stage during the discharging step. It can be usefully applied in solar plants, or in industrial processes, such as metallurgical transformations. Sensible, latent and thermo-chemical media store heat in materials which change temperature, phase or chemical composition, respectively. Sensible heat storage is well-documented. Latent heat storage, using phase change materials (PCMs), mainly using liquid–solid transition to store latent heat, allows a more compact, efficient and therefore economical system to operate. Thermo-chemical heat storage (TCS) is still at an early stage of laboratory and pilot research despite its attractive application for long term energy storage. The present review will assess previous research, while also adding novel treatments of the subject. TES systems are of growing importance within the energy awareness: TES can reduce the LCOE (levelized cost of electricity) of renewable energy processes, with the temperature of the storage medium being the most important parameter. Sensible heat storage is well-documented in literature and applied at large scale, hence limited in the content of the present review paper. Latent heat storage using PCMs is dealt with, specifically towards high temperature applications, where inorganic substances offer a high potential. Finally, the use of energy storage through reversible chemical reactions (thermo-chemical storage, TCS) is assessed. Since PCM and TCS storage media need to be contained in a capsule (sphere, tube, sandwich plates) of appropriate materials, potential containment materials are examined. A heat transfer fluid (HTF) is required to convey the heat from capture, to storage and ultimate re-use. Particle suspensions offer a valid alternative to common HTF, and a preliminary assessment confirms the advantages of the upflow bubbling fluidized bed and demonstrates that particulate suspensions enable major savings in investment and operating costs. Novel treatments of the TES subject in the review involve the required encapsulation of the latent and chemical storage media, the novel development of powder circulation loops as heat transfer media, the conductivity enhancement of PCMs, the use of lithium salts, among others.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
1 retracted
Jourabian, M., Farhadi, M., & Sedighi, K. (2014) · Computers & Mathematics with Applications · doi:10.1016/j.camwa.2014.02.004 · Cited by 47
RetractedCarslaw, H. S., & Jaeger, J. C. (1947) · International Linear Collider · Cited by 19,877
Perry's chemical engineers' handbook
(2008) · Choice Reviews Online · doi:10.5860/choice.45-4393 · Cited by 10,121
A treatise on electricity and magnetism
(1954) · Journal of the Franklin Institute · doi:10.1016/0016-0032(54)90053-8 · Cited by 9,077
Thring, M. W. (1977) · Electronics and Power · doi:10.1049/ep.1977.0180 · Cited by 7,338
Review on thermal energy storage with phase change materials and applications
Sharma, A., Tyagi, V. V., Chen, C. R., & Buddhi, D. (2009) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2007.10.005 · Cited by 5,936
Perry's chemical engineers' handbook
(1998) · Choice Reviews Online · doi:10.5860/choice.35-3079 · Cited by 5,897
Zalba, B., Marı́n, J. M., Cabeza, L. F., & Mehling, H. (2003) · Applied Thermal Engineering · doi:10.1016/s1359-4311(02)00192-8 · Cited by 4,738
Thermal Conductivity of Heterogeneous Two-Component Systems
Hamilton, R. L., & Crosser, O. K. (1962) · Industrial & Engineering Chemistry Fundamentals · doi:10.1021/i160003a005 · Cited by 3,672
Geldart, D. (1973) · Powder Technology · doi:10.1016/0032-5910(73)80037-3 · Cited by 3,481 · cited 1×
“Whereas powder reactors in chemical applications mostly use Geldart A or B powders as bed material [202], HTF applications will mostly use A-type powders in order to limit the required gas flow rate and associated sensible Table 23”
MethodAgyenim, F., Hewitt, N., Eames, P., & Smyth, M. (2010) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2009.10.015 · Cited by 2,072
Numerical Solution of Partial Differential Equations, Finite Difference Methods.
T., V., & Smith, G. D. (1987) · Mathematics of Computation · doi:10.2307/2007849 · Cited by 2,016
Materials used as PCM in thermal energy storage in buildings: A review
Cabeza, L. F., Castell, A., Barreneche, C., de Gracia, A., & Fernández, A. I. (2011) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2010.11.018 · Cited by 1,889
Gil, A., Medrano, M., Martorell, I., Lázaro, A., Dolado, P., Zalba, B., & Cabeza, L. F. (2010) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2009.07.035 · Cited by 1,762
Low temperature latent heat thermal energy storage: Heat storage materials
Abhat, A. (1983) · Solar Energy · doi:10.1016/0038-092x(83)90186-x · Cited by 1,711
Energy supply, its demand and security issues for developed and emerging economies
ASIF, M., & MUNEER, T. (2007) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2005.12.004 · Cited by 1,403
Thermal energy storage technologies and systems for concentrating solar power plants
Kuravi, S., Trahan, J., Goswami, D. Y., Rahman, M. M., & Stefanakos, E. K. (2013) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2013.02.001 · Cited by 1,295
International Energy Agency (2012) · World Energy Outlook · doi:10.1787/weo-2012-en · Cited by 1,219
High-temperature phase change materials for thermal energy storage
Kenisarin, M. M. (2010) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2009.11.011 · Cited by 1,192
Concentrated solar power plants: Review and design methodology
Zhang, H. L., Baeyens, J., Degrève, J., & Cacères, G. (2013) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2013.01.032 · Cited by 1,130
Self-citationPoirier, D. R., & Geiger, G. H. (2016) · The Minerals, Metals & Materials Series · doi:10.1007/978-3-319-48090-9_9 · Cited by 1,072
Heat transfer characteristics of thermal energy storage system using PCM capsules: A review
Regin, A. F., Solanki, S. C., & Saini, J. S. (2008) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2007.06.009 · Cited by 945
Jamekhorshid, A., Sadrameli, S. M., & Farid, M. (2014) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2013.12.033 · Cited by 899
Medrano, M., Gil, A., Martorell, I., Potau, X., & Cabeza, L. F. (2010) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2009.07.036 · Cited by 829
Zhao, C. Y., Lu, W., & Tian, Y. (2010) · Solar Energy · doi:10.1016/j.solener.2010.04.022 · Cited by 757
Microencapsulated PCM thermal-energy storage system
Hawlader, M. N. A., Uddin, M. S., & Khin, M. M. (2003) · Applied Energy · doi:10.1016/s0306-2619(02)00146-0 · Cited by 745
Performance enhancement in latent heat thermal storage system: A review
Jegadheeswaran, S., & Pohekar, S. D. (2009) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2009.06.024 · Cited by 702
A review on effect of phase change material encapsulation on the thermal performance of a system
Salunkhe, P. B., & Shembekar, P. S. (2012) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2012.05.037 · Cited by 657
Preparation and thermal characterization of paraffin/metal foam composite phase change material
Xiao, X., Zhang, P., & Li, M. (2013) · Applied Energy · doi:10.1016/j.apenergy.2013.04.050 · Cited by 627
Paraffin/porous-graphite-matrix composite as a high and constant power thermal storage material
Py, X., Olives, R., & Mauran, S. (2001) · International Journal of Heat and Mass Transfer · doi:10.1016/s0017-9310(00)00309-4 · Cited by 618
Sorption thermal storage for solar energy
Yu, N., Wang, R. Z., & Wang, L. W. (2013) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2013.05.004 · Cited by 589
The latest advancements on thermochemical heat storage systems
Aydin, D., Casey, S. P., & Riffat, S. (2015) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2014.08.054 · Cited by 576
Zhao, C. Y., & Zhang, G. H. (2011) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2011.07.019 · Cited by 482
International energy outlook 1999
Energy Information Administration, O. O. I. A. A. F. (1999) · doi:10.2172/345025 · Cited by 464
Assessment of a Molten Salt Heat Transfer Fluid in a Parabolic Trough Solar Field
Kearney, D. W., Herrmann, U., Nava, P., Kelly, B., Mahoney, R., Pacheco, J. E., Cable, R. N., Potrovitza, N., Blake, D., & Price, H. (2003) · Journal of Solar Energy Engineering · doi:10.1115/1.1565087 · Cited by 443
Effect of carbon nanofiber additives on thermal behavior of phase change materials
Elgafy, A., & Lafdi, K. (2005) · Carbon · doi:10.1016/j.carbon.2005.06.042 · Cited by 430
Khodadadi, J. M., Fan, L., & Babaei, H. (2013) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2013.03.031 · Cited by 422
A nano-graphite/paraffin phase change material with high thermal conductivity
Li, M. (2013) · Applied Energy · doi:10.1016/j.apenergy.2013.01.031 · Cited by 421
Mesalhy, O., Lafdi, K., Elgafy, A., & Bowman, K. (2005) · Energy Conversion and Management · doi:10.1016/j.enconman.2004.06.010 · Cited by 407
A review of promising candidate reactions for chemical heat storage
Yan, T., Wang, R. Z., Li, T. X., Wang, L. W., & Fred, I. T. (2015) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2014.11.015 · Cited by 386
Cascaded latent heat storage for parabolic trough solar power plants
Michels, H., & Pitz-Paal, R. (2007) · Solar Energy · doi:10.1016/j.solener.2006.09.008 · Cited by 373
Selection of materials with potential in sensible thermal energy storage
Fernández, A. I., Martínez, M., Segarra, M., Martorell, I., & Cabeza, L. F. (2010) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2010.05.035 · Cited by 343
Thermal energy storage: “How previous findings determine current research priorities”
Fernandes, D., Pitié, F., Cáceres, G., & Baeyens, J. (2012) · Energy · doi:10.1016/j.energy.2012.01.024 · Cited by 328
Self-citationLow grade thermal energy sources and uses from the process industry in the UK
Ammar, Y., Joyce, S., Norman, R., Wang, Y., & Roskilly, A. P. (2012) · Applied Energy · doi:10.1016/j.apenergy.2011.06.003 · Cited by 323
A review on thermophysical properties of nanoparticle dispersed phase change materials
Kibria, M. A., Anisur, M. R., Mahfuz, M. H., Saidur, R., & Metselaar, I. H. S. C. (2015) · Energy Conversion and Management · doi:10.1016/j.enconman.2015.02.028 · Cited by 317
Wu, S., Zhu, D., Zhang, X., & Huang, J. (2010) · Energy & Fuels · doi:10.1021/ef9013967 · Cited by 309
Improving thermal conductivity phase change materials—A study of paraffin nanomagnetite composites
Şahan, N., Fois, M., & Paksoy, H. (2015) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2015.01.027 · Cited by 292
Zhang, H., & Wang, X. (2009) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2009.02.021 · Cited by 283
Self-citationTheoretical evidence for `Lichtenecker's mixture formulae' based on the effective medium theory
Zakri, T., Laurent, J.-P., & Vauclin, M. (1998) · Journal of Physics D: Applied Physics · doi:10.1088/0022-3727/31/13/013 · Cited by 282
Heat transfer enhancement in water when used as PCM in thermal energy storage
Cabeza, L. F., Mehling, H., Hiebler, S., & Ziegler, F. (2002) · Applied Thermal Engineering · doi:10.1016/s1359-4311(02)00035-2 · Cited by 281
Behaviour of gas-fluidized beds of fine powders part I. Homogeneous expansion
Abrahamsen, A. R., & Geldart, D. (1980) · Powder Technology · doi:10.1016/0032-5910(80)85005-4 · Cited by 274
Thermal energy storage for direct steam generation
Laing, D., Bahl, C., Bauer, T., Lehmann, D., & Steinmann, W.-D. (2011) · Solar Energy · doi:10.1016/j.solener.2010.08.015 · Cited by 268
Chen, B., Wang, X., Zeng, R., Zhang, Y., Wang, X., Niu, J., Li, Y., & Di, H. (2008) · Experimental Thermal and Fluid Science · doi:10.1016/j.expthermflusci.2008.05.008 · Cited by 258
Velraj, R., Seeniraj, R. V., Hafner, B., Faber, C., & Schwarzer, K. (1997) · Solar Energy · doi:10.1016/s0038-092x(96)00167-3 · Cited by 242
Fluidized bed waste incinerators: Design, operational and environmental issues
Van Caneghem, J., Brems, A., Lievens, P., Block, C., Billen, P., Vermeulen, I., Dewil, R., Baeyens, J., & Vandecasteele, C. (2012) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2012.03.001 · Cited by 213
Self-citationPeiró, G., Gasia, J., Miró, L., & Cabeza, L. F. (2015) · Renewable Energy · doi:10.1016/j.renene.2015.05.029 · Cited by 211
Castell, A., Solé, C., Medrano, M., Roca, J., Cabeza, L. F., & García, D. (2008) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2007.11.004 · Cited by 208
Charvin, P., Stéphane, A., Florent, L., & Gilles, F. (2008) · Energy Conversion and Management · doi:10.1016/j.enconman.2007.12.011 · Cited by 205
Flamant, G., Daniel, G., Benoit, H., et al. (2013) · Chemical Engineering Science · doi:10.1016/j.ces.2013.08.051 · Cited by 200
Design of packed bed thermal energy storage systems for high-temperature industrial process heat
Zanganeh, G., Pedretti, A., Haselbacher, A., & Steinfeld, A. (2014) · Applied Energy · doi:10.1016/j.apenergy.2014.07.110 · Cited by 198
Michel, B., Mazet, N., & Neveu, P. (2014) · Applied Energy · doi:10.1016/j.apenergy.2014.04.073 · Cited by 197
Schmidt, M., Szczukowski, C., Roßkopf, C., Linder, M., & Wörner, A. (2013) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2013.09.020 · Cited by 196
A novel near-zero CO2 emission thermal cycle with LNG cryogenic exergy utilization
Zhang, N., & Noam Lior, B. (2005) · Energy · doi:10.1016/j.energy.2005.05.006 · Cited by 195
Siegel, N. P., Ho, C. K., Khalsa, S. S. S., & Kolb, G. J. (2010) · Journal of Solar Energy Engineering · doi:10.1115/1.4001146 · Cited by 193
Sciacovelli, A., Colella, F., & Verda, V. (2013) · International Journal of Energy Research · doi:10.1002/er.2974 · Cited by 186
Experimental and numerical investigation of thermal energy storage with a finned tube
Erek, A., ?lken, Z., & Acar, M. A. (2005) · International Journal of Energy Research · doi:10.1002/er.1057 · Cited by 174
Ca(OH) 2 /CaO reversible reaction in a fluidized bed reactor for thermochemical heat storage
Pardo, P., Anxionnaz‐Minvielle, Z., Rougé, S., et al. (2014) · Solar Energy · doi:10.1016/j.solener.2014.06.010 · Cited by 170
Carrillo, A. J., Moya, J., Bayón, A., Jana, P., O’Shea, V. A. D. L. P., Romero, M., González‐Aguilar, J., Serrano, D. P., Pizarro, P., & Coronado, J. M. (2014) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2013.12.018 · Cited by 165
Thermal investigation of PCM-based high temperature thermal energy storage in packed bed
Peng, H., Dong, H., & Ling, X. (2014) · Energy Conversion and Management · doi:10.1016/j.enconman.2014.02.052 · Cited by 165
Performance enhancement of a solar dynamic LHTS module having both fins and multiple PCMs
Seeniraj, R. V., & Narasimhan, N. L. (2007) · Solar Energy · doi:10.1016/j.solener.2007.11.001 · Cited by 159
Warzoha, R. J., Weigand, R., & Fleischer, A. S. (2014) · Applied Energy · doi:10.1016/j.apenergy.2014.03.091 · Cited by 157
Coen‐Porisini, F. (1988) · Solar Energy · doi:10.1016/0038-092x(88)90136-3 · Cited by 155
ENHANCEMENT OF HEAT TRANSFER BY INSERTING A METAL MATRIX INTO A PHASE CHANGE MATERIAL
Tong, X., Khan, J. A., & Ruhulamin, M. (1996) · Numerical Heat Transfer Part A Applications · doi:10.1080/10407789608913832 · Cited by 149
Utilization of the cryogenic exergy of liquid natural gas (LNG) for the production of electricity
Szargut, J., & Szczygieł, I. (2009) · Energy · doi:10.1016/j.energy.2009.02.015 · Cited by 144
Motahar, S., Nikkam, N., Alemrajabi, A. A., Khodabandeh, R., Toprak, M. S., & Muhammed, M. A. (2014) · International Communications in Heat and Mass Transfer · doi:10.1016/j.icheatmasstransfer.2014.06.005 · Cited by 144
Catalytic investigation of ceria-zirconia solid solutions for solar hydrogen production
Gal, A. L., & Abanades, S. (2011) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2011.01.078 · Cited by 144
Brems, A., Baeyens, J., Beerlandt, J., & Dewil, R. (2011) · Resources Conservation and Recycling · doi:10.1016/j.resconrec.2011.03.003 · Cited by 143
Self-citationLamberg, P. (2003) · Applied Energy · doi:10.1016/s0306-2619(03)00106-5 · Cited by 143
Latent heat storage with tubular-encapsulated phase change materials (PCMs)
Zhang, H.-L., Baeyens, J., Degrève, J., Cáceres, G., Segal, R., & Pitié, F. (2014) · Energy · doi:10.1016/j.energy.2014.03.067 · Cited by 142
Self-citationPolymeric Cracking of Waste Polyethylene Terephthalate to Chemicals and Energy
Brems, A., Baeyens, J., Vandecasteele, C., & Dewil, R. (2011) · Journal of the Air & Waste Management Association · doi:10.3155/1047-3289.61.7.721 · Cited by 139
Self-citationCarrillo, A. J., Serrano, D. P., Pizarro, P., & Coronado, J. M. (2014) · Journal of Materials Chemistry A · doi:10.1039/c4ta03409k · Cited by 132
Review of study on solid particle solar receivers
Tan, T., & Chen, Y. (2009) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2009.05.012 · Cited by 126
Lithium in thermal energy storage: A state-of-the-art review
Cabeza, L. F., Gutiérrez, A., Barreneche, C., Ushak, S., Fernández, Á. G., Fernádez, A. I., & Grágeda, M. (2014) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2014.10.096 · Cited by 126
Wang, J., Ouyang, Y., & Chen, G. (2001) · International Journal of Energy Research · doi:10.1002/er.695 · Cited by 120
Cabeza, L. F., Illa, J., Roca, J., Badía, F., Mehling, H., Hiebler, S., & Ziegler, F. (2001) · Materials and Corrosion · doi:10.1002/1521-4176(200110)52:10<748::aid-maco748>3.0.co;2-s · Cited by 118
Thermal and exergetic analysis of Metal Foam-enhanced Cascaded Thermal Energy Storage (MF-CTES)
Tian, Y., & Zhao, C. (2012) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2012.11.034 · Cited by 112
Fund, I. M. (2011) · Perspectives de l'économie mondiale · doi:10.5089/9781616350994.081 · Cited by 111
Zhang, H., Benoit, H., Daniel, G., et al. (2015) · Applied Energy · doi:10.1016/j.apenergy.2015.10.005 · Cited by 101
Self-citationNanofluids with encapsulated tin nanoparticles for advanced heat transfer and thermal energy storage
Cingarapu, S., Singh, D., Timofeeva, E. V., & Moravek, M. R. (2013) · International Journal of Energy Research · doi:10.1002/er.3041 · Cited by 99
PREPARATION AND EVALUATION OF A NOVEL SOLAR STORAGE MATERIAL: MICROENCAPSULATED PARAFFIN
Hawlader, M. N. A., UDDIN, M. S., & Zhu, H. (2000) · International Journal of Sustainable Energy · doi:10.1080/01425910008914357 · Cited by 97
Analysis of power cycle based on cold energy of liquefied natural gas and low-grade heat source
Wang, Q., Li, Y., & Jiang, W. (2003) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2003.09.010 · Cited by 97
Li, Z., & Wu, Z. (2013) · Solar Energy · doi:10.1016/j.solener.2013.11.017 · Cited by 96
Computational Fluid Dynamics Modeling of Gas-Particle Flow Within a Solid-Particle Solar Receiver
Chen, H., Chen, Y., Hsieh, H.-T., & Siegel, N. P. (2006) · Journal of Solar Energy Engineering · doi:10.1115/1.2716418 · Cited by 95
High temperature latent heat storage with a screw heat exchanger: Design of prototype
Zipf, V., Neuhäuser, A., Willert, D., Nitz, P., Gschwander, S., & Platzer, W. J. (2012) · Applied Energy · doi:10.1016/j.apenergy.2012.11.044 · Cited by 93
Maruoka, N., Sato, K., Yagi, J.-I., & Akiyama, T. (2002) · ISIJ International · doi:10.2355/isijinternational.42.215 · Cited by 92
Cabeza, L. F., Alibés, J. I. I., Enrich, J. R., Pascual, F. B., Mehling, H., Hiebler, S., & Ziegler, F. (2001) · RECERCAT (Consorci de Serveis Universitaris de Catalunya) · doi:10.1002/1521-4176(200102)52:2<140::aid-maco140>3.0.co;2-r · Cited by 91
Infrared spectroscopic study of hydrogen-bonding in water at high temperature and pressure
Tassaing, T., Danten, Y., & Besnard, M. (2002) · Journal of Molecular Liquids · doi:10.1016/s0167-7322(02)00089-2 · Cited by 88
Thermal performance analysis for a heat receiver using multiple phase change materials
Cui, H., Yuan, X., & Hou, X. (2003) · Applied Thermal Engineering · doi:10.1016/s1359-4311(03)00210-2 · Cited by 86
Cyclic heat transfer in a novel storage unit of multiple phase change materials
Gong, Z., & Mujumdar, A. S. (1996) · Applied Thermal Engineering · doi:10.1016/1359-4311(95)00088-7 · Cited by 86
Fundamentals and applications of cryogen as a thermal energy carrier: A critical assessment
Li, Y., Chen, H., & Ding, Y. (2010) · International Journal of Thermal Sciences · doi:10.1016/j.ijthermalsci.2009.12.012 · Cited by 84
Thermo-mechanical analysis of ceramic encapsulated phase-change-material (PCM) particles
Pitié, F., Zhao, C., & Cáceres, G. (2011) · Energy & Environmental Science · doi:10.1039/c0ee00672f · Cited by 81
Self-citationCorrosion resistance of stainless steels during thermal cycling in alkali nitrate molten salts.
Bradshaw, R., & Goods, S. H. (2001) · doi:10.2172/1020472 · Cited by 77
Pitié, F., Zhao, C.-Y., Baeyens, J., Degrève, J., & Zhang, H. L. (2013) · Applied Energy · doi:10.1016/j.apenergy.2012.12.048 · Cited by 77
Self-citationLopez, J., Cáceres, G., del Barrio, E. P., & Jomaa, W. (2009) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2009.10.025 · Cited by 76
Self-citationThermal Stress Analysis of PCM Encapsulation for Heat Recovery of High Temperature Waste Heat.
Maruoka, N., & Akiyama, T. (2003) · JOURNAL OF CHEMICAL ENGINEERING OF JAPAN · doi:10.1252/jcej.36.794 · Cited by 75
Zhang, Y., & Faghri, A. (1996) · Enhanced heat transfer/Journal of enhanced heat transfer · doi:10.1615/jenhheattransf.v3.i2.50 · Cited by 71
A New Heat Transfer Fluid for Concentrating Solar Systems: Particle Flow in Tubes
Flamant, G., Daniel, G., Benoit, H., et al. (2014) · Energy Procedia · doi:10.1016/j.egypro.2014.03.067 · Cited by 68
Heat Transfer Enhancement Study of a LHTS Unit Containing Dispersed High Conductivity Particles
Seeniraj, R. V., Velraj, R., & Narasimhan, N. L. (2002) · Journal of Solar Energy Engineering · doi:10.1115/1.1488669 · Cited by 66
Spelling, J., Gallo, A., Romero, M., et al. (2015) · Energy Procedia · doi:10.1016/j.egypro.2015.03.191 · Cited by 59
Development of highly conductive KNO3/NaNO3 composite for TES (thermal energy storage)
Zhao, Y. J., Wang, R. Z., Wang, L., & Yu, N. (2014) · Energy · doi:10.1016/j.energy.2014.03.127 · Cited by 59
A novel Brayton cycle with the integration of liquid hydrogen cryogenic exergy utilization
Zhang, N., & Noam Lior, B. (2007) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2007.08.006 · Cited by 55
Photovoltaics: Reviewing the European Feed-in-Tariffs and Changing PV Efficiencies and Costs
Zhang, H. L., Gerven, T. V., Baeyens, J., & Degrève, J. (2014) · The Scientific World JOURNAL · doi:10.1155/2014/404913 · Cited by 53
Self-citationLiquid nitrogen fueled, closed Brayton cycle cryogenic heat engine
Ordonez, C. A. (2000) · Energy Conversion and Management · doi:10.1016/s0196-8904(99)00117-x · Cited by 53
Gong, Z., & MUJUMDAR, A. S. (1995) · Journal of Solar Energy Engineering · doi:10.1115/1.2847798 · Cited by 52
Liquid nitrogen injection into water: Pressure build-up and heat transfer
Wen, D., Chen, H., Ding, Y., & Dearman, P. (2006) · Cryogenics · doi:10.1016/j.cryogenics.2006.06.007 · Cited by 51
Study on phase change temperature distributions of composite PCMs in thermal energy storage systems
Wang, J., Chen, G., & Zheng, F. (1999) · International Journal of Energy Research · doi:10.1002/(sici)1099-114x(19990325)23:4<277::aid-er475>3.0.co;2-q · Cited by 49
Solar Thermochemical Production of Fuels
Meier, A., & Steinfeld, A. (2010) · Advances in science and technology · doi:10.4028/www.scientific.net/ast.74.303 · Cited by 49
Exergy analysis of liquefied natural gas cold energy recovering cycles
Wang, Q., Li, Y., & Chen, X. (2004) · International Journal of Energy Research · doi:10.1002/er.1040 · Cited by 41
Thermal Characteristics of a Compact, Passive Thermal Energy Storage Device
Bauer, C., & Wirtz, R. A. (2000) · doi:10.1115/imece2000-1395 · Cited by 41
A cryogen-based peak-shaving technology: systematic approach and techno-economic analysis
Li, Y., Wang, X., & Ding, Y. (2011) · International Journal of Energy Research · doi:10.1002/er.1942 · Cited by 39
Meng, Q.-L., Lee, C.-I., Kaneko, H., & Tamaura, Y. (2011) · Thermochimica Acta · doi:10.1016/j.tca.2011.01.028 · Cited by 38
Cold Thermal Storage and Cryogenic Heat Engines for Energy Storage Applications
Ordonez, C. A., & Plummer, M. C. (1997) · Energy Sources · doi:10.1080/00908319708908858 · Cited by 35
Energy storage with PCM in fluidized beds: Modeling and experiments
Izquierdo-Barrientos, M. A., Sobrino, C., & Almendros-Ibáñez, J. A. (2014) · Chemical Engineering Journal · doi:10.1016/j.cej.2014.11.107 · Cited by 34
Kashani, S., Ranjbar, A. A., Madani, M. M., Mastiani, M., & Jalaly, H. (2013) · Journal of Applied Mechanics and Technical Physics · doi:10.1134/s0021894413050027 · Cited by 33
Agrafiotis, C., Roeb, M., & Sattler, C. (2014) · doi:10.1115/es2014-6336 · Cited by 23
Gokon, N., Yamamoto, H., Kondo, N., & Kodama, T. (2010) · Journal of Solar Energy Engineering · doi:10.1115/1.4001154 · Cited by 20
Abolghasemi, M., Keshavarz, A. A., & Mehrabian, M. A. (2012) · Heat and Mass Transfer · doi:10.1007/s00231-012-1039-1 · Cited by 18
Pacheco, K. A., Li, Y., & Wang, M. (2014) · Computer-aided chemical engineering/Computer aided chemical engineering · doi:10.1016/b978-0-444-63455-9.50091-x · Cited by 11
Latent Heat Storage with Phase Change Materials (PCMs)
Zhang, H. L., Baeyens, J., Degrève, J., & Pitié, F. (2013) · Journal of Technology Innovations in Renewable Energy · doi:10.6000/1929-6002.2013.02.04.5 · Cited by 10
Self-citation
Cited by
Recent developments in phase change materials for energy storage applications: A review
Nazir, H., Batool, M., Bolivar Osorio, F. J., Isaza-Ruiz, M., Xu, X., Vignarooban, K., Phelan, P., Inamuddin, & Kannan, A. M. (2019) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2018.09.126 · Cited by 1,522
Carrillo, A. J., González-Aguilar, J., Romero, M., & Coronado, J. M. (2019) · Chemical Reviews · doi:10.1021/acs.chemrev.8b00315 · Cited by 630
Recent advances of thermal safety of lithium ion battery for energy storage
Lyu, P., Liu, X., Qu, J., Zhao, J., Huo, Y., Qu, Z., & Rao, Z. (2020) · Energy Storage Materials · doi:10.1016/j.ensm.2020.06.042 · Cited by 624
Hybrid energy storage system for microgrids applications: A review
Hajiaghasi, S., Salemnia, A., & Hamzeh, M. (2019) · Journal of Energy Storage · doi:10.1016/j.est.2018.12.017 · Cited by 585
Zhang, S., Feng, D., Shi, L., Wang, L., Jin, Y., Tian, L., Li, Z., Wang, G., Zhao, L., & Yan, Y. (2021) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2020.110127 · Cited by 568
Metadata
- Authors
- Zhang, H., Baeyens, J., Cáceres, G., Degrève, J., & Lv, Y.
- Venue
- Progress in Energy and Combustion Science
- Publisher
- Elsevier BV
- Published
- 2016-03
- Volume
- 53
- Pages
- 1-40
- ISSN
- 0360-1285 (ISSN-L)
- OpenAlex
- W2224021613
- Cited by
- 910
- References
- 129
- FWCI
- 52.63
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.