Pyrolysis technology for plastic waste recycling: A state-of-the-art review

Production, use, and fate of all plastics ever made

Geyer, R., Jambeck, J. R., & Law, K. L. (2017) · Science Advances · doi:10.1126/sciadv.1700782 · Cited by 18,606

IOP Conference Series: Earth and Environmental Science

Hermansah, H., Sandi, N., & Naspendra, Z. (2020) · IOP Conference Series Earth and Environmental Science · doi:10.1088/issn.1755-1315 · Cited by 12,775

Lignocellulosic biomass pyrolysis mechanism: A state-of-the-art review

Wang, S., Dai, G., Yang, H., & Luo, Z. (2017) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2017.05.004 · Cited by 2,670

Recycling and recovery routes of plastic solid waste (PSW): A review

Al-Salem, S. M., Lettieri, P., & Baeyens, J. (2009) · Waste Management · doi:10.1016/j.wasman.2009.06.004 · Cited by 2,419

Chemical recycling of waste plastics for new materials production

Rahimi, A., & Garcı́a, J. M. (2017) · Nature Reviews Chemistry · doi:10.1038/s41570-017-0046 · Cited by 2,148

A review on pyrolysis of plastic wastes

Anuar Sharuddin, S. D., Abnisa, F., Wan Daud, W. M. A., & Aroua, M. K. (2016) · Energy Conversion and Management · doi:10.1016/j.enconman.2016.02.037 · Cited by 2,126

Current opinion: What is a nanoplastic?

Gigault, J., Halle, A. T., Baudrimont, M., Pascal, P.-Y., Gauffre, F., Phi, T.-L., El Hadri, H., Grassl, B., & Reynaud, S. (2018) · Environmental Pollution · doi:10.1016/j.envpol.2018.01.024 · Cited by 2,010

Chemical Strategies To Design Textured Materials: from Microporous and Mesoporous Oxides to Nanonetworks and Hierarchical Structures

Soler‐Illia, G. J. A. A., Sánchez, C., Lebeau, B., & Patarin, J. (2002) · Chemical Reviews · doi:10.1021/cr0200062 · Cited by 2,005

Life Cycle Assessment: Past, Present, and Future

Guinée, J. B., Heijungs, R., Huppes, G., Zamagni, A., Masoni, P., Buonamici, R., Ekvall, T., & Rydberg, T. (2010) · Environmental Science & Technology · doi:10.1021/es101316v · Cited by 1,952

Heterogeneous Catalyst Deactivation and Regeneration: A Review

Argyle, M. D., & Bartholomew, C. H. (2015) · Catalysts · doi:10.3390/catal5010145 · Cited by 1,942

Beyond Mechanical Recycling: Giving New Life to Plastic Waste

Vollmer, I., Jenks, M. J. F., Roelands, M. C. P., White, R. J., van Harmelen, T., de Wild, P., van der Laan, G. P., Meirer, F., Keurentjes, J. T. F., & Weckhuysen, B. M. (2020) · Angewandte Chemie International Edition · doi:10.1002/anie.201915651 · Cited by 1,905

Recycling of plastic solid waste: A state of art review and future applications

Singh, N., Hui, D., Singh, R., Ahuja, I. S., Feo, L., & Fraternali, F. (2016) · Composites Part B Engineering · doi:10.1016/j.compositesb.2016.09.013 · Cited by 1,296

Microplastic in terrestrial ecosystems

Rillig, M. C., & Lehmann, A. (2020) · Science · doi:10.1126/science.abb5979 · Cited by 1,142

Thermochemical routes for the valorization of waste polyolefinic plastics to produce fuels and chemicals. A review

Lopez, G., Artetxe, M., Amutio, M., Bilbao, J., & Olazar, M. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.01.142 · Cited by 897

Polyethylene upcycling to long-chain alkylaromatics by tandem hydrogenolysis/aromatization

Zhang, F., Zeng, M., Yappert, R. D., Sun, J., Lee, Y.-H., LaPointe, A. M., Peters, B., Abu-Omar, M. M., & Scott, S. L. (2020) · Science · doi:10.1126/science.abc5441 · Cited by 882

High-quality graphene via microwave reduction of solution-exfoliated graphene oxide

Voiry, D., Yang, J., Kupferberg, J. E., Fullon, R., Lee, C., Jeong, H. Y., Shin, H. S., & Chhowalla, M. (2016) · Science · doi:10.1126/science.aah3398 · Cited by 874

Municipal solid waste (MSW) as a renewable source of energy: Current and future practices in China

Cheng, H., & Hu, Y. (2010) · Bioresource Technology · doi:10.1016/j.biortech.2010.01.040 · Cited by 783

Valorization of biomass waste to engineered activated biochar by microwave pyrolysis: Progress, challenges, and future directions

Foong, S. Y., Liew, R. K., Yang, Y., Cheng, Y. W., Yek, P. N. Y., Wan Mahari, W. A., Lee, X. Y., Han, C. S., Vo, D.-V. N., Van Le, Q., et al. (2020) · Chemical Engineering Journal · doi:10.1016/j.cej.2020.124401 · Cited by 749

The chemistry of chemical recycling of solid plastic waste via pyrolysis and gasification: State-of-the-art, challenges, and future directions

Dogu, O., Pelucchi, M., de Vijver, R. V., Steenberge, P. H. M. V., D’hooge, D., Cuoci, A., Mehl, M., Frassoldati, A., Faravelli, T., & Geem, K. M. V. (2021) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2020.100901 · Cited by 729

Composition of products from the pyrolysis of polyethylene and polystyrene in a closed batch reactor: Effects of temperature and residence time

Onwudili, J. A., Insura, N., & Williams, P. T. (2009) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2009.07.008 · Cited by 716

Current state and future prospects of plastic waste as source of fuel: A review

Wong, S. L., Ngadi, N., Abdullah, T. A. T., & Inuwa, I. M. (2015) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2015.04.063 · Cited by 701

Plastics to fuel: a review

Kunwar, B., CHENG, H. N., Chandrashekaran, S. R., & Sharma, B. K. (2015) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2015.10.015 · Cited by 648

Microwave-initiated catalytic deconstruction of plastic waste into hydrogen and high-value carbons

Jie, X., Li, W., Slocombe, D., Gao, Y., Banerjee, I., Gonzalez-Cortes, S., Yao, B., AlMegren, H., Alshihri, S., Dilworth, J., et al. (2020) · Nature Catalysis · doi:10.1038/s41929-020-00518-5 · Cited by 611

Plastic waste to fuels by hydrocracking at mild conditions

Liu, S., Kots, P. A., Vance, B. C., Danielson, A., & Vlachos, D. G. (2021) · Science Advances · doi:10.1126/sciadv.abf8283 · Cited by 583

Coke formation and deactivation during catalytic reforming of biomass and waste pyrolysis products: A review

Ochoa, A., Bilbao, J., Gayubo, A. G., & Castaño, P. (2019) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2019.109600 · Cited by 559

The valorization of plastic solid waste (PSW) by primary to quaternary routes: From re-use to energy and chemicals

Al-Salem, S. M., Lettieri, P., & Baeyens, J. (2009) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2009.09.001 · Cited by 530

Zeolite Catalysts with Tunable Hierarchy Factor by Pore‐Growth Moderators

Pérez‐Ramírez, J., Verboekend, D., Bonilla, A., & Abelló, S. (2009) · Advanced Functional Materials · doi:10.1002/adfm.200901394 · Cited by 528

Catalytic upcycling of high-density polyethylene via a processive mechanism

Tennakoon, A., Wu, X. W., Paterson, A. L., Patnaik, S., Pei, Y., LaPointe, A. M., Ammal, S. C., Hackler, R. A., Heyden, A., Slowing, I. I., et al. (2020) · Nature Catalysis · doi:10.1038/s41929-020-00519-4 · Cited by 528

Modeling and simulation of combustion processes of charring and non-charring solid fuels

Blasi, C. D. (1993) · Progress in Energy and Combustion Science · doi:10.1016/0360-1285(93)90022-7 · Cited by 520

A review on tertiary recycling of high-density polyethylene to fuel

Kumar, S., Panda, A. K., & Singh, R. K. (2011) · Resources Conservation and Recycling · doi:10.1016/j.resconrec.2011.05.005 · Cited by 496

The multi-scale challenges of biomass fast pyrolysis and bio-oil upgrading: Review of the state of art and future research directions

Sharifzadeh, M., Sadeqzadeh, M., Guo, M., Borhani, T. N. G., Konda, N. V. S. N. M., Cortada-García, M., Wang, L., Hallett, J. P., & Shah, N. (2018) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2018.10.006 · Cited by 481

Catalytic pyrolysis of plastic wastes with two different types of catalysts: ZSM-5 zeolite and Red Mud

López, A., de Marco, I., Caballero, B. M., Laresgoiti, M. F., Adrados, A., & Aranzabal, A. (2011) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2011.03.030 · Cited by 479

Developing Advanced Catalysts for the Conversion of Polyolefinic Waste Plastics into Fuels and Chemicals

Serrano, D. P., Aguado, J., & Escola, J. M. (2012) · ACS Catalysis · doi:10.1021/cs3003403 · Cited by 471

Pyrolysis of a fraction of waste polypropylene and polyethylene for the recovery of BTX aromatics using a fluidized bed reactor

Jung, S.-H., Cho, M.-H., Kang, B.-S., & Kim, J.-S. (2009) · Fuel Processing Technology · doi:10.1016/j.fuproc.2009.10.009 · Cited by 441

Possibilities and limitations of biotechnological plastic degradation and recycling

Wei, R., Tiso, T., Bertling, J., O’Connor, K. E., Blank, L. M., & Bornscheuer, U. T. (2020) · Nature Catalysis · doi:10.1038/s41929-020-00521-w · Cited by 433

Influence of time and temperature on pyrolysis of plastic wastes in a semi-batch reactor

López-Urionabarrenechea, A., de Marco, I., Caballero, B. M., Laresgoiti, M. F., & Adrados, A. (2011) · Chemical Engineering Journal · doi:10.1016/j.cej.2011.07.037 · Cited by 401

Advances on methane steam reforming to produce hydrogen through membrane reactors technology: A review

Iulianelli, A., Liguori, S., Wilcox, J. L., & Basile, A. (2016) · Catalysis Reviews · doi:10.1080/01614940.2015.1099882 · Cited by 389

Heat transfer and kinetics in the low temperature pyrolysis of solids

Pyle, D., & Zaror, C. (1984) · Chemical Engineering Science · doi:10.1016/0009-2509(84)80140-2 · Cited by 382

Thermal degradation of typical plastics under high heating rate conditions by TG-FTIR: Pyrolysis behaviors and kinetic analysis

Xu, F., Wang, B., Yang, D., Hao, J., Qiao, Y., & Tian, Y. (2018) · Energy Conversion and Management · doi:10.1016/j.enconman.2018.06.047 · Cited by 375

Recent advances of pore system construction in zeolite-catalyzed chemical industry processes

Shi, J. M., Wang, Y., Yang, W., Tang, Y. D., & Xie, Z. (2015) · Chemical Society Reviews · doi:10.1039/c5cs00626k · Cited by 367

Catalytic pyrolysis of waste plastics using staged catalysis for production of gasoline range hydrocarbon oils

Ratnasari, D. K., Nahil, M. A., & Williams, P. T. (2016) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2016.12.027 · Cited by 367

Auger reactors for pyrolysis of biomass and wastes

Campuzano, F., Brown, R. C., & Martínez, J. D. (2018) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2018.12.014 · Cited by 365

Recent advances in ordered meso/macroporous metal oxides for heterogeneous catalysis: a review

Wang, Y., Arandiyan, H., Scott, J. A., Bagheri, A., Dai, H., & Amal, R. (2017) · Journal of Materials Chemistry A · doi:10.1039/c6ta10896b · Cited by 353

A life cycle assessment of mechanical and feedstock recycling options for management of plastic packaging wastes

Perugini, F., Mastellone, M. L., & Arena, U. (2005) · Environmental Progress · doi:10.1002/ep.10078 · Cited by 349

Pyrolysis of high-density polyethylene in a fluidised bed reactor. Influence of the temperature and residence time

Mastral, J. F., Esperanza, E., Garcı́a, P., & Juste, M. (2002) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/s0165-2370(01)00137-1 · Cited by 348

Plastic waste to liquid oil through catalytic pyrolysis using natural and synthetic zeolite catalysts

Miandad, R., Barakat, M. A. E.-F., Rehan, M., Aburiazaiza, A. S., Ismail, I. M. I., & Nizami, A. (2017) · Waste Management · doi:10.1016/j.wasman.2017.08.032 · Cited by 345

Combustion, performance and emission analysis of a DI diesel engine using plastic pyrolysis oil

Kalargaris, I., Tian, G., & Gu, S. (2016) · Fuel Processing Technology · doi:10.1016/j.fuproc.2016.11.016 · Cited by 340

The use of different metal catalysts for the simultaneous production of carbon nanotubes and hydrogen from pyrolysis of plastic feedstocks

Acomb, J. C., Wu, C., & Williams, P. T. (2015) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2015.06.054 · Cited by 336

Low-temperature catalytic upgrading of waste polyolefinic plastics into liquid fuels and waxes

Nakaji, Y., Tamura, M., Miyaoka, S., Kumagai, S., Tanji, M., Nakagawa, Y., Yoshioka, T., & Tomishige, K. (2020) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2020.119805 · Cited by 332

Jet fuel production from waste plastics via catalytic pyrolysis with activated carbons

Zhang, Y., Duan, D., Lei, H., Villota, E. M., & Ruan, R. R. (2019) · Applied Energy · doi:10.1016/j.apenergy.2019.113337 · Cited by 328

Co-production of hydrogen and carbon nanotubes from catalytic pyrolysis of waste plastics on Ni-Fe bimetallic catalyst

Yao, D., Wu, C., Yang, H., Zhang, Y. S., Nahil, M. A., Chen, Y., Williams, P. T., & Chen, H. (2017) · Energy Conversion and Management · doi:10.1016/j.enconman.2017.06.012 · Cited by 316

Pyrolysis of plastic waste for production of heavy fuel substitute: A techno-economic assessment

Fivga, A., & Dimitriou, I. (2018) · Energy · doi:10.1016/j.energy.2018.02.094 · Cited by 314

Catalytic pyrolysis of plastic wastes in a continuous microwave assisted pyrolysis system for fuel production

Zhou, N., Dai, L., Lv, Y., Li, H., Deng, W., Guo, F., Chen, P. L., Lei, H., & Ruan, R. R. (2021) · Chemical Engineering Journal · doi:10.1016/j.cej.2021.129412 · Cited by 311

Structure–performance descriptors and the role of Lewis acidity in the methanol-to-propylene process

Yarulina, I., Wispelaere, K. D., Bailleul, S., Goetze, J., Radersma, M., Abou‐Hamad, E., Vollmer, I., Goesten, M. G., Mezari, B., Hensen, E. J. M., et al. (2018) · Nature Chemistry · doi:10.1038/s41557-018-0081-0 · Cited by 299

Catalytic microwave-assisted pyrolysis of plastic waste over NiO and HY for gasoline-range hydrocarbons production

Ding, K., Liu, S., Huang, Y. D., Liu, S., Zhou, N., Peng, P., Wang, Y., Chen, P. L., & Ruan, R. R. (2019) · Energy Conversion and Management · doi:10.1016/j.enconman.2019.07.001 · Cited by 295

LCA of plastic waste recovery into recycled materials, energy and fuels in Singapore

Hsien Hui, K. H. O. O. (2019) · Resources Conservation and Recycling · doi:10.1016/j.resconrec.2019.02.010 · Cited by 294

Insights into the coke deposited on HZSM-5, Hβ and HY zeolites during the cracking of polyethylene

Castaño, P., Elordi, G., Olazar, M., Aguayo, A. T., Pawelec, B., & Bilbao, J. (2011) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2011.02.024 · Cited by 287

Microwave-assisted pyrolysis of biomass feedstocks: the way forward?

Luque, R., Menéndez, J. Á., Arenillas, A., & Cot, J. (2011) · Energy & Environmental Science · doi:10.1039/c1ee02450g · Cited by 286

Experimental investigation to identify the type of waste plastic pyrolysis oil suitable for conversion to diesel engine fuel

Mangesh, V. L., Padmanabhan, S., Tamizhdurai, P., & Ramesh, A. (2019) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.119066 · Cited by 284

Time and temperature depended fuel gas generation from pyrolysis of real world municipal plastic waste

Singh, R. K., & Ruj, B. (2016) · Fuel · doi:10.1016/j.fuel.2016.01.049 · Cited by 282

Pyrolysis of synthetic polymers and plastic wastes. Kinetic study

Encinar, J. M., & González, J. F. G. (2008) · Fuel Processing Technology · doi:10.1016/j.fuproc.2007.12.011 · Cited by 276

Characterization of the waxes obtained by the pyrolysis of polyolefin plastics in a conical spouted bed reactor

Arabiourrutia, M., Elordi, G., López, G., Borsella, E., Bilbao, J., & Olazar, M. (2011) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2011.12.012 · Cited by 275

Effect of catalyst contact mode and gas atmosphere during catalytic pyrolysis of waste plastics

Xue, Y., Johnston, P. A., & Bai, X. (2017) · Energy Conversion and Management · doi:10.1016/j.enconman.2017.03.071 · Cited by 273

Pyrolysis–gasification of plastics, mixed plastics and real-world plastic waste with and without Ni–Mg–Al catalyst

Wu, C., & Williams, P. T. (2010) · Fuel · doi:10.1016/j.fuel.2010.05.032 · Cited by 271

Valorization of packaging plastic waste by slow pyrolysis

Das, P., & Tiwari, P. (2017) · Resources Conservation and Recycling · doi:10.1016/j.resconrec.2017.09.025 · Cited by 270

Multi-scale complexities of solid acid catalysts in the catalytic fast pyrolysis of biomass for bio-oil production – A review

Liu, R., Sarker, M., Rahman, M. M., Li, C., Chai, M., Nishu, N., Cotillon, R., & Scott, N. R. (2020) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2020.100852 · Cited by 270

Catalytic pyrolysis of HDPE in continuous mode over zeolite catalysts in a conical spouted bed reactor

Elordi, G., Olazar, M., López, G., Amutio, M., Artetxe, M., Aguado, R., & Bilbao, J. (2008) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2008.10.015 · Cited by 264

The Chemistry and Kinetics of Polyethylene Pyrolysis: A Process to Produce Fuels and Chemicals

Zhao, D., Wang, X., Miller, J. B., & Huber, G. W. (2020) · ChemSusChem · doi:10.1002/cssc.201903434 · Cited by 259

Cracking of High Density Polyethylene Pyrolysis Waxes on HZSM-5 Catalysts of Different Acidity

Artetxe, M., López, G., Amutio, M., Elordi, G., Bilbao, J., & Olazar, M. (2013) · Industrial & Engineering Chemistry Research · doi:10.1021/ie4014869 · Cited by 250

Sorption of Heavy Metals by Inorganic and Organic Components of Solid Wastes: Significance to Use of Wastes as Low-Cost Adsorbents and Immobilizing Agents

Zhou, Y., & Haynes, R. J. (2010) · Critical Reviews in Environmental Science and Technology · doi:10.1080/10643380802586857 · Cited by 243

Catalytic Degradation of High-Density Polyethylene over Different Zeolitic Structures

Manos, G., Garforth, A. A., & Dwyer, J. P. (2000) · Industrial & Engineering Chemistry Research · doi:10.1021/ie990512q · Cited by 242

Processing Real-World Waste Plastics by Pyrolysis-Reforming for Hydrogen and High-Value Carbon Nanotubes

Wu, C., Nahil, M. A., Miskolczi, N., Huang, J., & Williams, P. T. (2013) · Environmental Science & Technology · doi:10.1021/es402488b · Cited by 242

Impact of temperature on the activity of Fe-Ni catalysts for pyrolysis and decomposition processing of plastic waste

Yao, D., Li, H., Dai, Y., & Wang, C.-H. (2021) · Chemical Engineering Journal · doi:10.1016/j.cej.2020.127268 · Cited by 241

Aromatic fuel oils produced from the pyrolysis-catalysis of polyethylene plastic with metal-impregnated zeolite catalysts

Akubo, K., Nahil, M. A., & Williams, P. T. (2017) · Journal of the Energy Institute · doi:10.1016/j.joei.2017.10.009 · Cited by 234

Role of pore structure in the deactivation of zeolites (HZSM-5, Hβ and HY) by coke in the pyrolysis of polyethylene in a conical spouted bed reactor

Elordi, G., Olazar, M., López, G., Castaño, P., & Bilbao, J. (2010) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2010.12.002 · Cited by 229

Influence of temperature and reaction time on the conversion of polystyrene waste to pyrolysis liquid oil

Miandad, R., Nizami, A., Rehan, M., Barakat, M. A. E.-F., Khan, M. I., Mustafa, A., Ismail, I. M. I., & Murphy, J. D. (2016) · Waste Management · doi:10.1016/j.wasman.2016.09.023 · Cited by 229

Plastic Solid Waste (PSW) in the Context of Life Cycle Assessment (LCA) and Sustainable Management

Antelava, A., Damilos, S., Hafeez, S., Manos, G., Al-Salem, S. M., Sharma, B. K., Kohli, K., & Constantinou, A. (2019) · Environmental Management · doi:10.1007/s00267-019-01178-3 · Cited by 229

Comparison of in-situ and ex-situ catalytic pyrolysis in a micro-reactor system

Wang, K., Johnston, P. A., & Brown, R. C. (2014) · Bioresource Technology · doi:10.1016/j.biortech.2014.09.097 · Cited by 227

Product Yields and Compositions in the Continuous Pyrolysis of High-Density Polyethylene in a Conical Spouted Bed Reactor

Elordi, G., Olazar, M., López, G., Artetxe, M., & Bilbao, J. (2011) · Industrial & Engineering Chemistry Research · doi:10.1021/ie200186m · Cited by 226

Styrene recovery from polystyrene by flash pyrolysis in a conical spouted bed reactor

Artetxe, M., López, G., Amutio, M., Barbarias, I., Arregi, A., Aguado, R., Bilbao, J., & Olazar, M. (2015) · Waste Management · doi:10.1016/j.wasman.2015.05.034 · Cited by 225

Valorisation of different waste plastics by pyrolysis and in-line catalytic steam reforming for hydrogen production

Barbarias, I., López, G., Artetxe, M., Arregi, A., Bilbao, J., & Olazar, M. (2017) · Energy Conversion and Management · doi:10.1016/j.enconman.2017.11.048 · Cited by 216

A review on thermal decomposition and combustion of thermoplastic polyesters

Levchik, S. V., & Weil, E. D. (2004) · Polymers for Advanced Technologies · doi:10.1002/pat.526 · Cited by 212

Microwave pyrolysis of biomass for bio-oil production: Scalable processing concepts

Beneroso, D., Monti, T., Kostas, E. T., & Robinson, J. P. (2017) · Chemical Engineering Journal · doi:10.1016/j.cej.2017.01.130 · Cited by 211

Improving the aromatic production in catalytic fast pyrolysis of cellulose by co-feeding low-density polyethylene

Li, X., Zhang, H., Li, J., Su, L., Zuo, J., Komarneni, S., & Wang, Y. (2013) · Applied Catalysis A General · doi:10.1016/j.apcata.2013.01.038 · Cited by 208

Olefins from polyolefins and mixed plastics by pyrolysis

Kaminsky, W., Schlesselmann, B., & Simon, C. (1995) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/0165-2370(94)00830-t · Cited by 204

Thermal degradation of poly(ethylene terephthalate) at the processing temperature

Samperi, F., Puglisi, C., Alicata, R., & Montaudo, G. (2003) · Polymer Degradation and Stability · doi:10.1016/s0141-3910(03)00166-6 · Cited by 204

Two-stage pyrolysis of polystyrene: Pyrolysis oil as a source of fuels or benzene, toluene, ethylbenzene, and xylenes

Park, K.-B., Jeong, Y.-S., Güzelçiftçi, B., & Kim, J.-S. (2019) · Applied Energy · doi:10.1016/j.apenergy.2019.114240 · Cited by 202

Catalytic Conversion of Polyolefins into Liquid Fuels over MCM-41: Comparison with ZSM-5 and Amorphous SiO2−Al2O3

Aguado, J., Sotelo, J. L., Serrano, D. P., Calles, J. A., & Escola, J. M. (1997) · Energy & Fuels · doi:10.1021/ef970055v · Cited by 201

Ex-situ catalytic upgrading of vapors from microwave-assisted pyrolysis of low-density polyethylene with MgO

Fan, L., Zhang, Y., Liu, S., Zhou, N., Chen, P. L., Liu, Y., Wang, Y., Peng, P., Cheng, Y., Addy, M., et al. (2017) · Energy Conversion and Management · doi:10.1016/j.enconman.2017.07.039 · Cited by 197

Control of steam input to the pyrolysis-gasification of waste plastics for improved production of hydrogen or carbon nanotubes

Acomb, J. C., Wu, C., & Williams, P. T. (2013) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2013.09.018 · Cited by 195

Light olefins from HDPE cracking in a two-step thermal and catalytic process

Artetxe, M., López, G., Amutio, M., Elordi, G., Bilbao, J., & Olazar, M. (2012) · Chemical Engineering Journal · doi:10.1016/j.cej.2012.06.105 · Cited by 191

Kinetic study of municipal plastic waste

Diaz-Silvarrey, L. S., & Phan, A. N. (2016) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2016.05.202 · Cited by 191

Insights into pyrolysis and co-pyrolysis of biomass and polystyrene: Thermochemical behaviors, kinetics and evolved gas analysis

Özsin, G., & Pütün, A. E. (2017) · Energy Conversion and Management · doi:10.1016/j.enconman.2017.07.059 · Cited by 190

Operating Conditions for the Pyrolysis of Poly-(ethylene terephthalate) in a Conical Spouted-Bed Reactor

Artetxe, M., López, G., Amutio, M., Elordi, G., Olazar, M., & Bilbao, J. (2010) · Industrial & Engineering Chemistry Research · doi:10.1021/ie900557c · Cited by 187

Fluidized bed thermal degradation products of HDPE in an inert atmosphere and in air–nitrogen mixtures

Mastral, J. F., Esperanza, E., Berrueco, C., Juste, M., & Ceamanos, J. (2003) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/s0165-2370(02)00068-2 · Cited by 175

Kinetics of polystyrene pyrolysis in a conical spouted bed reactor

Aguado, R. (2003) · Chemical Engineering Journal · doi:10.1016/s1385-8947(02)00119-5 · Cited by 171

Production of Hydrogen from Plastics by Pyrolysis and Catalytic Steam Reform

Czernik, S., & French, R. J. (2006) · Energy & Fuels · doi:10.1021/ef050354h · Cited by 170

Life cycle assessment of alternative technologies for municipal solid waste and plastic solid waste management in the Greater London area

Al-Salem, S. M., Evangelisti, S., & Lettieri, P. (2014) · Chemical Engineering Journal · doi:10.1016/j.cej.2014.01.066 · Cited by 169

Liquid oils produced from pyrolysis of plastic wastes with heat carrier in rotary kiln

Zhang, Y., Ji, G., Chen, C., Wang, Y., Wang, W., & Li, A. (2020) · Fuel Processing Technology · doi:10.1016/j.fuproc.2020.106455 · Cited by 169

Hydrogen-rich gas production from waste plastics by pyrolysis and low-temperature steam reforming over a ruthenium catalyst

Namioka, T., Saito, A., Inoue, Y., yeongsu, P., Min, T., Roh, S. A., & Yoshikawa, K. (2011) · Applied Energy · doi:10.1016/j.apenergy.2010.12.053 · Cited by 166

An investigation into the catalytic cracking of LDPE using Py–GC/MS

Serrano, D. P., Aguado, J., Escola, J. M., Rodríguez, J., & Miguel, G. S. (2005) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2004.11.026 · Cited by 166

Mechanistic Modeling of Polymer Degradation: A Comprehensive Study of Polystyrene

Kruse, T. M., Woo, O. S., Wong, H., Khan, S. S., & Broadbelt, L. J. (2002) · Macromolecules · doi:10.1021/ma020490a · Cited by 164

Quantitative analysis of random scission and chain-end scission in the thermal degradation of polyethylene

Ueno, T., Nakashima, E., & Takeda, K. (2010) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2010.04.020 · Cited by 164

Pyrolysis–gasification of post-consumer municipal solid plastic waste for hydrogen production

Wu, C., & Williams, P. T. (2009) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2009.11.045 · Cited by 164

Experimental Study of Thermal and Catalytic Pyrolysis of Plastic Waste Components

Anene, A. F., Fredriksen, S. B., Sætre, K. A., & Tokheim, L.-A. (2018) · Sustainability · doi:10.3390/su10113979 · Cited by 163

Development of plasma pyrolysis/gasification systems for energy efficient and environmentally sound waste disposal

Tang, L., Huang, H., Hao, H., & Zhao, K. (2013) · Journal of Electrostatics · doi:10.1016/j.elstat.2013.06.007 · Cited by 160

Fe-, Ti-, Zr- and Al-pillared clays for efficient catalytic pyrolysis of mixed plastics

Li, K., Lei, J., Yuan, G., Weerachanchai, P., Wang, J., Zhao, J. L., & Yang, Y. (2017) · Chemical Engineering Journal · doi:10.1016/j.cej.2017.02.113 · Cited by 158

Correlation between Brønsted Acid Strength and Local Structure in Zeolites

Katada, N., Suzuki, K., Noda, T., Sastre, G., & Niwa, M. (2009) · The Journal of Physical Chemistry C · doi:10.1021/jp903788n · Cited by 157

Polymer waste recycling over “used” catalysts

Salmiaton, A., Garforth, A. A., Harris, D. H., Rawlence, D. J., & Uemichi, Y. (2002) · Catalysis Today · doi:10.1016/s0920-5861(02)00076-7 · Cited by 155

Economic performance of pyrolysis of mixed plastic waste: Open-loop versus closed-loop recycling

Larraín, M., Passel, S. V., Thomassen, G., Kresovic, U., Alderweireldt, N., Moerman, E., & Billen, P. (2020) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2020.122442 · Cited by 155

Effect of the temperature in the nature and extension of the primary and secondary reactions in the thermal and HZSM-5 catalytic pyrolysis of HDPE

Hernández, M. D. R., Gómez‐Siurana, A., García, A. N. J., Agulló, J., & Marcilla, A. F. (2006) · Applied Catalysis A General · doi:10.1016/j.apcata.2006.10.017 · Cited by 154

Production of Light Olefins from Polyethylene in a Two-Step Process: Pyrolysis in a Conical Spouted Bed and Downstream High-Temperature Thermal Cracking

Artetxe, M., López, G., Elordi, G., Amutio, M., Bilbao, J., & Olazar, M. (2012) · Industrial & Engineering Chemistry Research · doi:10.1021/ie300178e · Cited by 154

Brønsted/Lewis Acid Synergy in Methanol-to-Aromatics Conversion on Ga-Modified ZSM-5 Zeolites, As Studied by Solid-State NMR Spectroscopy

Gao, P., Wang, Q., Xu, J., Qi, G., Wang, C., Zhou, X., Zhao, X., Feng, N., Liu, X., & Deng, F. (2017) · ACS Catalysis · doi:10.1021/acscatal.7b03211 · Cited by 154

Kinetics of pyrolysis of high density polyethylene. Comparison of isothermal and dynamic experiments

Ceamanos, J., Mastral, J. F., Millera, Á., & Aldea, M. E. (2002) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/s0165-2370(01)00183-8 · Cited by 153

Detailed mechanistic modeling of polymer degradation: application to polystyrene

Kruse, T. M., Woo, O. S., & Broadbelt, L. J. (2001) · Chemical Engineering Science · doi:10.1016/s0009-2509(00)00312-2 · Cited by 153

Effect of ZnCl2-activated biochar on catalytic pyrolysis of mixed waste plastics for producing aromatic-enriched oil

Sun, K., Huang, Q., Chi, Y., & Yan, J. (2018) · Waste Management · doi:10.1016/j.wasman.2018.09.054 · Cited by 153

Jet fuel and hydrogen produced from waste plastics catalytic pyrolysis with activated carbon and MgO

Huo, E., Lei, H., Liu, C., Zhang, Y., Xin, L., Zhao, Y., Qian, M., Zhang, Q., Lin, X., Wang, C., et al. (2020) · The Science of The Total Environment · doi:10.1016/j.scitotenv.2020.138411 · Cited by 150

Environmental impact assessment of converting flexible packaging plastic waste to pyrolysis oil and multi-walled carbon nanotubes

Ahamed, A., Veksha, A., Yin, K., Weerachanchai, P., Giannis, A., & Lisak, G. (2019) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2019.121449 · Cited by 149

Experimental study of catalytic pyrolysis of polyethylene and polypropylene over USY zeolite and separation to gasoline and diesel-like fuels

Kassargy, C., Awad, S., Burnens, G., Kahine, K., & Tazerout, M. L. (2017) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2017.09.005 · Cited by 144

Exergy and energy analysis of pyrolysis of plastic wastes in rotary kiln with heat carrier

Zhang, Y., Ji, G., Ma, D., Chen, C., Wang, Y., Wang, W., & Li, A. (2020) · Process Safety and Environmental Protection · doi:10.1016/j.psep.2020.06.021 · Cited by 142

Production of bio-oil from agricultural waste by using a continuous fast microwave pyrolysis system

Wang, Y., Zeng, Z., Tian, X., Dai, L., Jiang, L., Zhang, S., Wu, Q., Wen, P., Fu, G., Liu, Y., et al. (2018) · Bioresource Technology · doi:10.1016/j.biortech.2018.08.067 · Cited by 136

Benzoic acid recovery via waste poly(ethylene terephthalate) (PET) catalytic pyrolysis using sulphated zirconia catalyst

Diaz-Silvarrey, L. S., McMahon, A. P., & Phan, A. N. (2018) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2018.08.014 · Cited by 136

Realizing the Potential High Benefits of Circular Economy in the Chemical Industry: Ethylene Monomer Recovery via Polyethylene Pyrolysis

Somoza-Tornos, A., González-Garay, A., Pozo, C., Graells, M., Espuña, A., & Guillén‐Gosálbez, G. (2020) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.9b04835 · Cited by 135

Recycling of waste plastics by ultrapyrolysis using an internally circulating fluidized bed reactor

Milne, B. J., Behie, L. A., & Berruti, F. (1999) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/s0165-2370(99)00014-5 · Cited by 134

Understanding the pyrolysis mechanism of polyvinylchloride (PVC) by characterizing the chars produced in a wire-mesh reactor

Zhou, J., Gui, B., Qiao, Y., Zhang, J., Wang, W., Yao, H., Yu, Y., & Xu, M. (2015) · Fuel · doi:10.1016/j.fuel.2015.11.034 · Cited by 132

Maximizing light olefins and aromatics as high value base chemicals via single step catalytic conversion of plastic waste

Eschenbacher, A., Varghese, R. J., Abbas‐Abadi, M. S., & Geem, K. M. V. (2021) · Chemical Engineering Journal · doi:10.1016/j.cej.2021.132087 · Cited by 132

Catalytic Cracking of Polyethylene over Clay Catalysts. Comparison with an Ultrastable Y Zeolite

Manos, G., Yusof, I. Y., Papayannakos, N. G., & Gangas, N. H. (2001) · Industrial & Engineering Chemistry Research · doi:10.1021/ie001048o · Cited by 130

Influence of catalyst bed temperature and properties of zeolite catalysts on pyrolysis-catalysis of a simulated mixed plastics sample for the production of upgraded fuels and chemicals

Onwudili, J. A., Muhammad, C., & Williams, P. T. (2018) · Journal of the Energy Institute · doi:10.1016/j.joei.2018.10.001 · Cited by 130

Catalytic pyrolysis of LDPE leads to valuable resource recovery and reduction of waste problems

Shah, J., Jan, M. R., Mabood, F., & Jabeen, F. (2010) · Energy Conversion and Management · doi:10.1016/j.enconman.2010.06.016 · Cited by 128

The Depolymerization of Polymethylene and Polyethylene

Wall, L. A., Madorsky, S. L., Brown, D. W., Straus, S., & Simha, R. (1954) · Journal of the American Chemical Society · doi:10.1021/ja01642a017 · Cited by 128

Syngas production from biomass pyrolysis in a continuous microwave assisted pyrolysis system

Zhou, N., Zhou, J., Dai, L., Guo, F., Wang, Y., Li, H., Deng, W., Lei, H., Chen, P. L., Liu, Y., et al. (2020) · Bioresource Technology · doi:10.1016/j.biortech.2020.123756 · Cited by 127

Development and application of a continuous fast microwave pyrolysis system for sewage sludge utilization

Zhou, J., Liu, S., Zhou, N., Fan, L., Zhang, Y., Peng, P., Anderson, E., Ding, K., Wang, Y., Liu, Y., et al. (2018) · Bioresource Technology · doi:10.1016/j.biortech.2018.02.034 · Cited by 126

Numerical simulation of biomass fast pyrolysis in an auger reactor

Aramideh, S., Xiong, Q., Kong, S., & Brown, R. C. (2015) · Fuel · doi:10.1016/j.fuel.2015.04.038 · Cited by 122

Catalytic Degradation of High-Density Polyethylene on an Ultrastable-Y Zeolite. Nature of Initial Polymer Reactions, Pattern of Formation of Gas and Liquid Products, and Temperature Effects

Manos, G., Garforth, A. A., & Dwyer, J. P. (2000) · Industrial & Engineering Chemistry Research · doi:10.1021/ie990513i · Cited by 122

In-situ and ex-situ catalytic pyrolysis/co-pyrolysis of empty fruit bunches using mesostructured aluminosilicate catalysts

Shafaghat, H., Lee, H. W., Tsang, Y. F., Oh, D., Jae, J., Jung, S., Ko, C. H., Lam, S. S., & Park, Y. (2019) · Chemical Engineering Journal · doi:10.1016/j.cej.2019.02.055 · Cited by 122

Catalytic Co-pyrolysis of Biomass and Plastics (Polypropylene and Polystyrene) Using Spent FCC Catalyst

Kanduri, P. K., & Seethamraju, S. (2019) · Energy & Fuels · doi:10.1021/acs.energyfuels.9b03135 · Cited by 121

Catalytic flash pyrolysis of HDPE in a fluidized bed reactor for recovery of fuel-like hydrocarbons

Hernández, M. D. R., García, A. N. J., & Marcilla, A. F. (2006) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2006.03.009 · Cited by 120

Identification of the coke deposited on an HZSM-5 zeolite catalyst during the sequenced pyrolysis–cracking of HDPE

Ibáñez, M., Artetxe, M., López, G., Elordi, G., Bilbao, J., Olazar, M., & Castaño, P. (2013) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2013.11.023 · Cited by 119

Thermolysis of low density polyethylene catalysed by zeolites

Mordi, R. C., Fields, R., & Dwyer, J. P. (1994) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/0165-2370(93)00789-p · Cited by 119

Continuous Polyolefin Cracking on an HZSM-5 Zeolite Catalyst in a Conical Spouted Bed Reactor

Elordi, G., Olazar, M., López, G., Artetxe, M., & Bilbao, J. (2011) · Industrial & Engineering Chemistry Research · doi:10.1021/ie2002999 · Cited by 117

Kinetic study of the thermal decomposition of polypropylene, oil shale, and their mixture

Gersten, J. (2000) · Fuel · doi:10.1016/s0016-2361(00)00002-8 · Cited by 115

A life cycle assessment data analysis toolkit for the design of novel processes – A case study for a thermal cracking process for mixed plastic waste

Gear, M., Sadhukhan, J., Thorpe, R. B., Clift, R., SEVILLE, J. P. K., & Keast, M. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2018.01.015 · Cited by 115

Gasoline and diesel-like fuel production by continuous catalytic pyrolysis of waste polyethylene and polypropylene mixtures over USY zeolite

Kassargy, C., Awad, S., Burnens, G., Kahine, K., & Tazerout, M. L. (2018) · Fuel · doi:10.1016/j.fuel.2018.03.113 · Cited by 114

High-temperature de fluidization

SIEGELL, J. H. (1984) · Powder Technology · doi:10.1016/0032-5910(84)80029-7 · Cited by 110

Producing Aromatic-Enriched Oil from Mixed Plastics Using Activated Biochar as Catalyst

Sun, K., Huang, Q., Ali, M., Chi, Y., & Yan, J. (2018) · Energy & Fuels · doi:10.1021/acs.energyfuels.7b03710 · Cited by 110

Selective production of aromatics from waste plastic pyrolysis by using sewage sludge derived char catalyst

Sun, K., Themelis, N. J., Bourtsalas, A. C., & Huang, Q. (2020) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2020.122038 · Cited by 110

Effect of the acidity of the HZSM-5 zeolite catalyst on the cracking of high density polyethylene in a conical spouted bed reactor

Elordi, G., Olazar, M., Artetxe, M., Castaño, P., & Bilbao, J. (2011) · Applied Catalysis A General · doi:10.1016/j.apcata.2011.12.011 · Cited by 107

Nascent tar formation during polyvinylchloride (PVC) pyrolysis

Gui, B., Qiao, Y., Wan, D., Liu, S., Han, Z., Yao, H., & Xu, M. (2012) · Proceedings of the Combustion Institute · doi:10.1016/j.proci.2012.08.013 · Cited by 106

Environmental Impact of Pyrolysis of Mixed WEEE Plastics Part 2: Life Cycle Assessment

Alston, S. M., & Arnold, C. (2011) · Environmental Science & Technology · doi:10.1021/es2016654 · Cited by 106

Life-cycle analysis of fuels from post-use non-recycled plastics

Benavides, P. T., Sun, P., Han, J., Dunn, J. B., & Wang, M. (2017) · Fuel · doi:10.1016/j.fuel.2017.04.070 · Cited by 106

Pyrolysis of polystyrene waste in the presence of activated carbon in conventional and microwave heating using modified thermocouple

Rex, P., Shruthi, M., & Miranda, L. R. (2018) · Waste Management · doi:10.1016/j.wasman.2018.03.029 · Cited by 105

Characteristics of a new type continuous two-stage pyrolysis of waste polyethylene

Park, K.-B., Jeong, Y.-S., Güzelçiftçi, B., & Kim, J.-S. (2018) · Energy · doi:10.1016/j.energy.2018.10.078 · Cited by 105

Cracking catalysts used as fluidized bed material in the Hamburg pyrolysis process

Mertinkat, J., Kirsten, A., Predel, M., & Kaminsky, W. (1999) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/s0165-2370(98)00103-x · Cited by 104

Activator-assisted pyrolysis of polypropylene

Park, K.-B., Jeong, Y.-S., & Kim, J.-S. (2019) · Applied Energy · doi:10.1016/j.apenergy.2019.113558 · Cited by 104

Catalytic conversion of polyethylene into fuels over mesoporous MCM-41

Aguado, J., Serrano, D. P., Romero, M. D., & Escola, J. M. (1996) · Chemical Communications · doi:10.1039/cc9960000725 · Cited by 103

Study of the effects of regeneration of USY zeolite on the catalytic cracking of polyethylene

Kassargy, C., Awad, S., Burnens, G., Upreti, G., Kahine, K., & Tazerout, M. L. (2018) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2018.11.093 · Cited by 100

Microwave pyrolysis of polystyrene and polypropylene mixtures using different activated carbon from biomass

Rex, P., Masilamani, I. P., & Miranda, L. R. (2020) · Journal of the Energy Institute · doi:10.1016/j.joei.2020.03.013 · Cited by 100

Concentration and sources of polycyclic aromatic hydrocarbons (PAHs) and polychlorinated biphenyls (PCBs) in surface soil near a municipal solid waste (MSW) landfill

Melnyk, A., Dettlaff, A. D., Kuklińska, K., Namieśnik, J., & Wolska, L. (2015) · The Science of The Total Environment · doi:10.1016/j.scitotenv.2015.05.092 · Cited by 99

Recycling poly-(methyl methacrylate) by pyrolysis in a conical spouted bed reactor

López, G., Artetxe, M., Amutio, M., Elordi, G., Aguado, R., Olazar, M., & Bilbao, J. (2010) · Chemical Engineering and Processing - Process Intensification · doi:10.1016/j.cep.2010.08.002 · Cited by 99

Aromatic hydrocarbon selectivity as a function of CaO basicity and aging during CaO-catalyzed PET pyrolysis using tandem µ-reactor-GC/MS

Kumagai, S., Yamasaki, R., Kameda, T., Saito, Y., Watanabe, A., Watanabe, C., Teramae, N., & Yoshioka, T. (2017) · Chemical Engineering Journal · doi:10.1016/j.cej.2017.09.077 · Cited by 99

Recovering waste plastics using shape-selective nano-scale reactors as catalysts

Zhang, Z., Góra‐Marek, K., Watson, J. S., Tian, J., Ryder, M. R., Tarach, K. A., López-Pérez, L., Martı́nez-Triguero, J., & Melián-Cabrera, I. V. (2018) · Nature Sustainability · doi:10.1038/s41893-018-0195-9 · Cited by 98

Energy recovery from cross-linked polyethylene wastes using pyrolysis and CO2 assisted gasification

Singh, P., Déparrois, N., Burra, K. R. G., Bhattacharya, S., & Gupta, A. K. (2019) · Applied Energy · doi:10.1016/j.apenergy.2019.113722 · Cited by 97

The catalytic cracking of sterically challenging plastic feedstocks over high acid density Al-SBA-15 catalysts

Socci, J., Osatiashtiani, A., Kyriakou, G., & Bridgwater, A. V. (2018) · Applied Catalysis A General · doi:10.1016/j.apcata.2018.11.020 · Cited by 96

Performance of a continuous screw kiln reactor for the thermal and catalytic conversion of polyethylene–lubricating oil base mixtures

Serrano, D. P., Aguado, J., Escola, J. M., & Garagorri, E. (2003) · Applied Catalysis B: Environmental · doi:10.1016/s0926-3373(03)00024-9 · Cited by 95

Effect of polyethylene terephthalate on the catalytic pyrolysis of polystyrene: Investigation of the liquid products

Adnan, A., Shah, J., & Jan, M. R. (2015) · Journal of the Taiwan Institute of Chemical Engineers · doi:10.1016/j.jtice.2015.01.015 · Cited by 95

Chemical recycling of plastic waste: Bitumen, solvents, and polystyrene from pyrolysis oil

Baena-González, J., Santamaria‐Echart, A., Aguirre, J. L., & González, S. (2020) · Waste Management · doi:10.1016/j.wasman.2020.08.035 · Cited by 94

Thermo-catalytic pyrolysis of polystyrene in the presence of zinc bulk catalysts

Adnan, A., Shah, J., & Jan, M. R. (2014) · Journal of the Taiwan Institute of Chemical Engineers · doi:10.1016/j.jtice.2014.05.011 · Cited by 92

Effect of a Draft Tube on the Fluid Dynamics of a Spouted Bed: Experimental and CFD Studies

Neto, J. L. V., Duarte, C. R., Murata, V. V., & Barrozo, M. A. S. (2008) · Drying Technology · doi:10.1080/07373930801897994 · Cited by 92

Polyethylene Cracking on a Spent FCC Catalyst in a Conical Spouted Bed

Elordi, G., Olazar, M., Castaño, P., Artetxe, M., & Bilbao, J. (2012) · Industrial & Engineering Chemistry Research · doi:10.1021/ie3018274 · Cited by 92

Formation of styrene monomer, dimer and trimer in the primary volatiles produced from polystyrene pyrolysis in a wire-mesh reactor

Zhou, J., Qiao, Y., Wang, W., Leng, E., Huang, J., Yu, Y., & Xu, M. (2016) · Fuel · doi:10.1016/j.fuel.2016.05.123 · Cited by 92

Production of benzene/toluene/ethyl benzene/xylene (BTEX) via multiphase catalytic pyrolysis of hazardous waste polyethylene using low cost fly ash synthesized natural catalyst

Gaurh, P., & Pramanik, H. (2018) · Waste Management · doi:10.1016/j.wasman.2018.05.013 · Cited by 91

A study of some thermal and mechanical properties of HDPE blend with marble and granite dust

Awad, A. H., El-Wahab, A. A. A., El-Gamasy, R., & Abdellatif, M. H. (2019) · Ain Shams Engineering Journal · doi:10.1016/j.asej.2018.08.005 · Cited by 91

Optimizing Microwave-Assisted Pyrolysis of Phosphoric Acid-Activated Biomass: Impact of Concentration on Heating Rate and Carbonization Time

Villota, E. M., Lei, H., Qian, M., Yang, Z., Villota, S. M. A., Zhang, Y., & Yadavalli, G. (2017) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.7b03669 · Cited by 89

Waste HD-PE plastic, deformation into liquid hydrocarbon fuel using pyrolysis-catalytic cracking with a CuCO 3 catalyst

Singh, M. V., Kumar, S., & Sarker, M. (2018) · Sustainable Energy & Fuels · doi:10.1039/c8se00040a · Cited by 89

Microwave-assisted catalytic dehydration of glycerol for sustainable production of acrolein over a microwave absorbing catalyst

Xie, Q., Li, S., Gong, R., Zheng, G., Wang, Y., Xu, P., Duan, Y., Yu, S., Lu, M., Ji, W., et al. (2018) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2018.10.058 · Cited by 89

Pyrolysis-catalysis for waste polyolefin conversion into low aromatic naphtha

Dai, L., Zhou, N., Lv, Y., Cobb, K., Cheng, Y., Wang, Y., Liu, Y., Chen, P. L., Zou, R., Lei, H., et al. (2021) · Energy Conversion and Management · doi:10.1016/j.enconman.2021.114578 · Cited by 88

Catalytic pyrolysis of polyolefin waste into valuable hydrocarbons over reused catalyst from refinery FCC units

Lin, Y., & Yang, M.-H. (2007) · Applied Catalysis A General · doi:10.1016/j.apcata.2007.05.039 · Cited by 87

Chemical characterization of bio-oils using comprehensive two-dimensional gas chromatography with time-of-flight mass spectrometry

Tessarolo, N. S., dos Santos, L. R. M., Silva, R. S. F., & Azevedo, D. A. (2013) · Journal of Chromatography A · doi:10.1016/j.chroma.2012.12.052 · Cited by 85

Application of highly stable biochar catalysts for efficient pyrolysis of plastics: a readily accessible potential solution to a global waste crisis

Wang, C., Lei, H., Qian, M., Huo, E., Zhao, Y., Zhang, Q., Mateo, W., Lin, X., Kong, X. L., Zou, R., et al. (2020) · Sustainable Energy & Fuels · doi:10.1039/d0se00652a · Cited by 85

Promoting Aromatic Hydrocarbon Formation via Catalytic Pyrolysis of Polycarbonate Wastes over Fe- and Ce-Loaded Aluminum Oxide Catalysts

Wang, J., Jiang, J., Meng, X., Li, M., Wang, X., Pang, S., Wang, K., Sun, Y., Zhong, Z., Ruan, R. R., et al. (2020) · Environmental Science & Technology · doi:10.1021/acs.est.0c00899 · Cited by 83

Converting Biomass and Waste Plastic to Solid Fuel Briquettes

Zannikos, F., Kalligeros, S. S., Anastopoulos, G., & Lois, E. (2012) · Journal of Renewable Energy · doi:10.1155/2013/360368 · Cited by 82

Study on thermal degradation of polystyrenes by pyrolysis-gas chromatography and pyrolysis-field ionization mass spectrometry

Ohtani, H., Yuyama, T., Tsuge, S., Plage, B., & Schulten, H. ‐. (1990) · European Polymer Journal · doi:10.1016/0014-3057(90)90164-y · Cited by 82

Effects of transition metal oxides on pyrolysis properties of PVC

Ji, M., Chen, L., Que, J., Zheng, L., Chen, Z., & Wu, Z. (2020) · Process Safety and Environmental Protection · doi:10.1016/j.psep.2020.04.010 · Cited by 81

System Analyses of High-Value Chemicals and Fuels from a Waste High-Density Polyethylene Refinery. Part 1: Conceptual Design and Techno-Economic Assessment

Gracida-Alvarez, U. R., Winjobi, O., Sacramento‐Rivero, J. C., & Shonnard, D. R. (2019) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.9b04763 · Cited by 80

Catalytic Pyrolysis of Poly(ethylene terephthalate) in the Presence of Metal Oxides for Aromatic Hydrocarbon Recovery Using Tandem μ-Reactor-GC/MS

Kumagai, S., Yamasaki, R., Kameda, T., Saito, Y., Watanabe, A., Watanabe, C., Teramae, N., & Yoshioka, T. (2020) · Energy & Fuels · doi:10.1021/acs.energyfuels.9b02915 · Cited by 79

Recycling benzene and ethylbenzene from in-situ catalytic fast pyrolysis of plastic wastes

Wang, J., Jiang, J., Sun, Y., Zhong, Z., Wang, X., Xia, H., Liu, G., Pang, S., Wang, K., Li, M., et al. (2019) · Energy Conversion and Management · doi:10.1016/j.enconman.2019.112088 · Cited by 78

Microwave-assisted catalytic fast pyrolysis coupled with microwave-absorbent of soapstock for bio-oil in a downdraft reactor

Wang, Y., Wu, Q., Yang, S., Yang, Q., Wu, J., Ma, Z., Jiang, L., Yu, Z., Dai, L., Liu, Y., et al. (2019) · Energy Conversion and Management · doi:10.1016/j.enconman.2019.01.101 · Cited by 77

Pyro-Oil and Wax Recovery from Reclaimed Plastic Waste in a Continuous Auger Pyrolysis Reactor

Al-Salem, S. M., Yang, Y., Wang, J., & Leeke, G. A. (2020) · Energies · doi:10.3390/en13082040 · Cited by 76

Catalytic nanosponges of acidic aluminosilicates for plastic degradation and CO2 to fuel conversion

Maity, A., Chaudhari, S. R., Titman, J. J., & Polshettiwar, V. (2020) · Nature Communications · doi:10.1038/s41467-020-17711-6 · Cited by 75

Towards the Circular Economy: Converting Aromatic Plastic Waste Back to Arenes over a Ru/Nb2O5 Catalyst

Jing, Y., Wang, Y., Furukawa, S., Xia, J., Sun, C., Hülsey, M. J., Wang, H., Guo, Y. Q., Liu, X., & Yan, N. (2020) · Angewandte Chemie · doi:10.1002/ange.202011063 · Cited by 74

Tandem μ-reactor-GC/MS for online monitoring of aromatic hydrocarbon production via CaO-catalysed PET pyrolysis

Kumagai, S., Yamasaki, R., Kameda, T., Saito, Y., Watanabe, A., Watanabe, C., Teramae, N., & Yoshioka, T. (2017) · Reaction Chemistry & Engineering · doi:10.1039/c7re00097a · Cited by 73

Catalytic cracking of polyethylene over nanocrystalline HZSM-5: Catalyst deactivation and regeneration study

Serrano, D. P., Aguado, J., Rodríguez, J. M., & Peral, Á. (2007) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2006.11.013 · Cited by 72

Pyrolysis of Expanded Waste Polystyrene: Influence of Nickel-Doped Copper Oxide on Kinetics, Thermodynamics, and Product Distribution

Nisar, J., Ali, G., Shah, A., Shah, M. R., Iqbal, M., Ashiq, M. N., & Bhatti, H. N. (2019) · Energy & Fuels · doi:10.1021/acs.energyfuels.9b03004 · Cited by 72

Modelling of isothermal and dynamic pyrolysis of plastics considering non-homogeneous temperature distribution and detailed degradation mechanism

Bockhorn, H., Hornung, A., Hornung, U., & Jakobströer, P. (1999) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/s0165-2370(98)00130-2 · Cited by 70

Low temperature conversion of plastic waste into light hydrocarbons

Shah, S. H., Khan, Z. M., Raja, I. A., Mahmood, Q., Bhatti, Z. A., Khan, J., Farooq, A., Rashid, N., & Wu, D. (2010) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2010.01.134 · Cited by 70

Catalytic pyrolysis of polyethylene: A comparison between pillared and restructured clays

Stefanis, A. D., Cafarelli, P., Gallese, F., Borsella, E., Nana, A., & Perez, G. (2013) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2013.05.023 · Cited by 70

Catalytic fast pyrolysis of low density polyethylene into naphtha with high selectivity by dual-catalyst tandem catalysis

Dai, L., Zhou, N., Li, H., Wang, Y., Liu, Y., Cobb, K., Cheng, Y., Lei, H., Chen, P. L., & Ruan, R. R. (2021) · The Science of The Total Environment · doi:10.1016/j.scitotenv.2021.144995 · Cited by 70

Transportation fuel from plastic: Two cases of study

Faussone, G. C. (2017) · Waste Management · doi:10.1016/j.wasman.2017.11.027 · Cited by 69

Effect of Temperature and Vapor Residence Time on the Micropyrolysis Products of Waste High Density Polyethylene

Gracida-Alvarez, U. R., Mitchell, M. K., Sacramento‐Rivero, J. C., & Shonnard, D. R. (2018) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.7b04362 · Cited by 69

Properties of hierarchical Beta zeolites prepared from protozeolitic nanounits for the catalytic cracking of high density polyethylene

Caldeira, V. P. S., Peral, Á., Linares, M., de Araujo, A. S., García‐Muñoz, R. A., & Serrano, D. P. (2016) · Applied Catalysis A General · doi:10.1016/j.apcata.2016.11.003 · Cited by 66

Catalytic Upcycling of Polyolefins

Sun, J., Dong, J., Gao, L., Zhao, Y., Moon, H., & Scott, S. L. (2024) · Chemical Reviews · doi:10.1021/acs.chemrev.3c00943 · Cited by 335

Understanding the Structure–Activity Relationships in Catalytic Conversion of Polyolefin Plastics by Zeolite-Based Catalysts: A Critical Review

Dong, Z., Chen, W., Xu, K., Liu, Y., Wu, J., & Zhang, F. (2022) · ACS Catalysis · doi:10.1021/acscatal.2c04915 · Cited by 280

Combustion, Chemistry, and Carbon Neutrality

Kohse‐Höinghaus, K. (2023) · Chemical Reviews · doi:10.1021/acs.chemrev.2c00828 · Cited by 236

Chemical recycling technologies for PVC waste and PVC-containing plastic waste: A review

Lu, L., Li, W., Cheng, Y., & Liu, M. (2023) · Waste Management · doi:10.1016/j.wasman.2023.05.012 · Cited by 223

A critical review on plastic waste life cycle assessment and management: Challenges, research gaps, and future perspectives

Jiao, H., Ali, S. S., Alsharbaty, M. H. M., Elsamahy, T., Abdelkarim, E. A., Schagerl, M., Al-Tohamy, R., & Sun, J. (2024) · Ecotoxicology and Environmental Safety · doi:10.1016/j.ecoenv.2024.115942 · Cited by 227

A short review of waste plastic chemical recycling by pyrolysis: From process parameters and catalytic mechanisms to product upgrading

Zhang, M., Ren, L., Wang, Y., Geng, J., Li, Z., Shen, H., Dong, M., & Xu, C. C. (2026) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2026.107710 · Cited by 10

Pyrolysis of the Plastics: Catalysts, Product Applications, and Techno-economic Assessment

Pandey, A., Subedi, A., Shakya, S. R., & Paudel, S. R. (2025) · Natural Built Social Environment Health · doi:10.63095/nbseh.25.452055 · Cited by 3

Thermochemical Recycling of Waste Plastics by Pyrolysis: A Review

Soni, V. K., Singh, G., Bineesh, K. V., Chopra, A., Kapur, G. S., & Ramakumar, S. S. V. (2021) · Energy & Fuels · doi:10.1021/acs.energyfuels.1c01292 · Cited by 252

Recent Advances in Catalytic Pyrolysis of Municipal Plastic Waste for the Production of Hydrocarbon Fuels

Pal, S., Kumar, A., Sharma, A. K., Ghodke, P. K., Pandey, S., & Patel, A. (2022) · Processes · doi:10.3390/pr10081497 · Cited by 48

Valorization of plastic wastes for production of fuels and value-added chemicals through pyrolysis – A review

Kartik, S., Balsora, H. K., Sharma, M., Saptoro, A., Jain, R. K., Joshi, J. B., & Sharma, A. (2022) · Thermal Science and Engineering Progress · doi:10.1016/j.tsep.2022.101316 · Cited by 113