The DOI matches its Crossref record; 20 of the 20 references it cites were found in a registry or an index.
Laboratory characterisation of shale properties
Open accessAbstract
Shale gas has become a significant resource play in the USA over the past few years and companies are now evaluating the shale gas potential of many sedimentary basins, including several onshore basins within Australia. The renewed focus on rock sequences that have hitherto largely been ignored has necessitated the development of workflows and methods for characterising shales. Along with the deployment of new methods comes the need for interpretation frameworks in order to understand properties such as rock source quality, mechanical properties and production performance from a diverse range of measurements. Laboratory characterisation of rock properties is an important part of any resource evaluation and for shale gas, specific properties of importance include silt content, organic matter abundance and type, static and dynamic mechanical properties (brittleness), micro/macro-fabrics, porosity, permeability, petrophysical properties and anisotropy. Here we introduce a workflow for systematic shale characterisation in the laboratory with a number of examples to illustrate and discuss the application to reservoir evaluation in shale gas plays. A suite of shales from a number of sedimentary basins around the world was collected and characterised with a full suite of non-destructive petrophysical methods before destructive geomechanical testing was performed. For each sample, a representative portion was analysed for quantitative mineralogy using XRD and XRF, and clay chemical reactivity via cation exchange capacity (CEC) and grain size by centrifugation. For many samples, surface area and Mercury Injection Capillary Pressure (MICP) for porosity and pore throat distribution were also performed and used to predict permeability from models available in the literature. Several imaging techniques including Scanning Electron Microscopy (SEM) and X-ray Computed (micro-)Tomography (X-ray CT) at low and high resolution were performed. Shale strength has previously been shown to be related to CEC, which is inversely proportional to silt content. Anisotropy of shale properties is both intrinsic and stress-induced. Dielectric properties are related to water content at high frequency and dispersion in the dielectric constant is directly related to CEC of clays in particular and hence rock strength. Stress-induced anisotropy of elastic properties was found to be dependent on the orientation of microfabrics with respect to the maximum principal stress direction. Low and high field nuclear magnetic resonance can be used to distinguish clay-bound and free water as well as adsorption of organic components and to screen for wettability. High and low field NMR techniques are combined to show that illitic shales tend to be strongly water wet while the presence of kaolinitic clays imparts a tendency for shales to become oil wet with likely consequences for oil/gas recovery strategy, production flow efficiency and drilling design.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Computerized transverse axial scanning (tomography): Part 1. Description of system
Hounsfield, G. N. (1973) · The British Journal of Radiology · doi:10.1259/0007-1285-46-552-1016 · Cited by 3,924
Ross, D. J. K., & Marc Bustin, R. (2009) · Marine and Petroleum Geology · doi:10.1016/j.marpetgeo.2008.06.004 · Cited by 2,217
Petroleum Related Rock Mechanics
(1992) · Developments in petroleum science · doi:10.1016/s0376-7361(09)x7008-1 · Cited by 1,222
Andrew, E. R., & Carr, H. Y. (1956) · Physics Today · doi:10.1063/1.3059898 · Cited by 1,189
Improved technique for determining complex permittivity with the transmission/reflection method
Baker‐Jarvis, J., Vanzura, E. J., & Kissick, W. A. (1990) · IEEE Transactions on Microwave Theory and Techniques · doi:10.1109/22.57336 · Cited by 1,090
Ross, D. J. K., & Bustin, R. M. (2008) · AAPG Bulletin · doi:10.1306/09040707048 · Cited by 757
Nuclear magnetic resonance petrophysical and logging applications
(2002) · Handbook of Geophysical Exploration: Seismic Exploration · doi:10.1016/s0950-1401(02)x8001-x · Cited by 531
Three‐dimensional analysis of porous BaTiO3 ceramics using FIB nanotomography
HOLZER, L., INDUTNYI, F., GASSER, P., MÜNCH, B., & WEGMANN, M. (2004) · Journal of Microscopy · doi:10.1111/j.0022-2720.2004.01397.x · Cited by 349
Permeability and petrophysical properties of 30 natural mudstones
Yang, Y., & Aplin, A. C. (2007) · Journal of Geophysical Research: Solid Earth · doi:10.1029/2005jb004243 · Cited by 303
Impact of fabric, microcracks and stress field on shale anisotropy
Dewhurst, D. N., & Siggins, A. F. (2006) · Geophysical Journal International · doi:10.1111/j.1365-246x.2006.02834.x · Cited by 264
Self-citation
Cited by
Low-field permanent magnets for industrial process and quality control
Mitchell, J., Gladden, L. F., Chandrasekera, T. C., & Fordham, E. J. (2014) · Progress in Nuclear Magnetic Resonance Spectroscopy · doi:10.1016/j.pnmrs.2013.09.001 · Cited by 300
Comparisons of pore size distribution: A case from the Western Australian gas shale formations
Hinai, A. A., Rezaee, R., Esteban, L., & Labani, M. (2014) · Journal of Unconventional Oil and Gas Resources · doi:10.1016/j.juogr.2014.06.002 · Cited by 271
Self-citationThe Nanoscale Basis of CO2 Trapping for Geologic Storage
Bourg, I. C., Beckingham, L. E., & DePaolo, D. J. (2015) · Environmental Science & Technology · doi:10.1021/acs.est.5b03003 · Cited by 163
Metadata
- Authors
- Josh, M., Esteban, L., Delle Piane, C., Sarout, J., Dewhurst, D. N., & Clennell, M. B.
- Venue
- Journal of Petroleum Science and Engineering
- Publisher
- Elsevier BV
- Published
- 2012-06
- Volume
- 88-89
- Pages
- 107-124
- ISSN
- 0920-4105 (ISSN-L)
- OpenAlex
- W2072613134
- Cited by
- 604
- References
- 20
- FWCI
- 31.62
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.