The DOI matches its Crossref record; 44 of the 44 references it cites were found in a registry or an index.
PLA-PHB/cellulose based films: Mechanical, barrier and disintegration properties
Open accessAbstract
Nanocomposite films based on poly(lactic acid)-poly(hydroxybutyrate) (PLA-PHB) blends and synthesized cellulose nanocrystals (CNC) or surfactant modified cellulose nanocrystals (CNCs), as bio-based reinforcement, were prepared by melt extrusion followed by film forming. The obtained nanocomposites are intended for short-term food packaging. Thus, the mechanical, optical, barrier and wettability properties were studied. Functionalized CNCs contribute to enhance the interfacial adhesion between PLA and PHB, leading to improved mechanical stiffness and increased film stretchability. The synergic effects of the PHB and CNCs on the PLA barrier properties were confirmed by increases in oxygen barrier properties and reductions in surface wettability of the nanocomposites. In addition, the measurements of the viscosity molecular weight for ternary systems showed practically no degradation of PLA and smaller degradation of PHB during processing due to nanocrystal presence. The disintegration process in composting conditions of PLA was delayed by the addition of PHB, while CNC speeded it up. PLA-PHB-CNCs formulations showed enhanced mechanical performance, improved water resistance, reduced oxygen and UV-light transmission, as well as appropriate disintegration in compost suggesting possible applications as packaging materials.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
An Overview of Polylactides as Packaging Materials
Auras, R., Harte, B., & Selke, S. (2004) · Macromolecular Bioscience · doi:10.1002/mabi.200400043 · Cited by 3,454
Polymer biodegradation: Mechanisms and estimation techniques – A review
Lucas, N., Bienaime, C., Belloy, C., Queneudec, M., Silvestre, F., & Nava-Saucedo, J.-E. (2008) · Chemosphere · doi:10.1016/j.chemosphere.2008.06.064 · Cited by 1,384
Food packaging based on polymer nanomaterials
Silvestre, C., Duraccio, D., & Cimmino, S. (2011) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2011.02.003 · Cited by 937
Multifunctional nanostructured PLA materials for packaging and tissue engineering
Armentano, I., Bitinis, N., Fortunati, E., Mattioli, S., Rescignano, N., Verdejo, R., Lopez-Manchado, M. A., & Kenny, J. M. (2013) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2013.05.010 · Cited by 645
Self-citationFortunati, E., Armentano, I., Zhou, Q., Iannoni, A., Saino, E., Visai, L., Berglund, L. A., & Kenny, J. M. (2012) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2011.09.066 · Cited by 581
Self-citationPhysical, structural and antimicrobial properties of poly vinyl alcohol–chitosan biodegradable films
Bonilla, J., Fortunati, E., Atarés, L., Chiralt, A., & Kenny, J. M. (2014) · Food Hydrocolloids · doi:10.1016/j.foodhyd.2013.07.002 · Cited by 518
Self-citationFortunati, E., Peltzer, M., Armentano, I., Torre, L., Jiménez, A., & Kenny, J. M. (2012) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2012.06.025 · Cited by 494
Self-citationZhang, M., & Thomas, N. L. (2011) · Advances in Polymer Technology · doi:10.1002/adv.20235 · Cited by 373
Ternary PLA–PHB–Limonene blends intended for biodegradable food packaging applications
Arrieta, M. P., López, J., Hernández, A., & Rayón, E. (2014) · European Polymer Journal · doi:10.1016/j.eurpolymj.2013.11.009 · Cited by 369
Self-citationDisintegrability under composting conditions of plasticized PLA–PHB blends
Arrieta, M. P., López, J., Rayón, E., & Jiménez, A. (2014) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2014.01.034 · Cited by 325
Self-citationCharacterization of PLA-limonene blends for food packaging applications
Arrieta, M. P., López, J., Ferrándiz, S., & Peltzer, M. A. (2013) · Polymer Testing · doi:10.1016/j.polymertesting.2013.03.016 · Cited by 320
Self-citationMultifunctional PLA–PHB/cellulose nanocrystal films: Processing, structural and thermal properties
Arrieta, M. P., Fortunati, E., Dominici, F., Rayón, E., López, J., & Kenny, J. M. (2014) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2014.02.044 · Cited by 293
Self-citationArrieta, M. P., Samper, M. D., López, J., & Jiménez, A. (2014) · Journal of Polymers and the Environment · doi:10.1007/s10924-014-0654-y · Cited by 229
Self-citationFortunati, E., Peltzer, M., Armentano, I., Jiménez, A., & Kenny, J. M. (2013) · Journal of Food Engineering · doi:10.1016/j.jfoodeng.2013.03.025 · Cited by 225
Self-citationFortunati, E., Armentano, I., Zhou, Q., Puglia, D., Terenzi, A., Berglund, L. A., & Kenny, J. M. (2012) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2012.03.027 · Cited by 220
Self-citationNano-biocomposite films with modified cellulose nanocrystals and synthesized silver nanoparticles
Fortunati, E., Rinaldi, S., Peltzer, M., Bloise, N., Visai, L., Armentano, I., Jiménez, A., Latterini, L., & Kenny, J. M. (2014) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2013.10.055 · Cited by 201
Self-citationNanotechnology for bioplastics: opportunities, challenges and strategies
Lagaron, J. M., & Lopez-Rubio, A. (2011) · Trends in Food Science & Technology · doi:10.1016/j.tifs.2011.01.007 · Cited by 199
Guo, L., Sato, H., Hashimoto, T., & Ozaki, Y. (2010) · Macromolecules · doi:10.1021/ma100307m · Cited by 193
Kale, G., Auras, R., & Singh, S. P. (2007) · Packaging Technology and Science · doi:10.1002/pts.742 · Cited by 179
Jonoobi, M., Mathew, A. P., Abdi, M. M., Makinejad, M. D., & Oksman, K. (2012) · Journal of Polymers and the Environment · doi:10.1007/s10924-012-0503-9 · Cited by 177
Thermal degradation of poly(3-hydroxybutyrate) plasticized with acetyl tributyl citrate
Erceg, M., Kovačić, T., & Klarić, I. (2005) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2005.04.048 · Cited by 165
Development and thermal behaviour of ternary PLA matrix composites
Fortunati, E., Armentano, I., Iannoni, A., & Kenny, J. M. (2010) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2010.02.034 · Cited by 161
Self-citationBiodegradation behavior of P(3HB,4HB)/PLA blends in real soil environments
Weng, Y.-X., Wang, L., Zhang, M., Wang, X.-L., & Wang, Y.-Z. (2013) · Polymer Testing · doi:10.1016/j.polymertesting.2012.09.014 · Cited by 158
Arrieta, M. P., Peltzer, M. A., López, J., Garrigós, M. C., Valente, A. J. M., & Jiménez, A. (2013) · Journal of Food Engineering · doi:10.1016/j.jfoodeng.2013.08.015 · Cited by 139
Self-citationBiodegradation and physical evaluation of PHB packaging
Bucci, D. Z., Tavares, L. B. B., & Sell, I. (2007) · Polymer Testing · doi:10.1016/j.polymertesting.2007.06.013 · Cited by 136
Martínez‐Sanz, M., Villano, M., Oliveira, C. S., Albuquerque, M. G. E., Majone, M., Reis, M. A. M., López‐Rubio, A., & Lagaron, J. M. (2013) · New Biotechnology · doi:10.1016/j.nbt.2013.06.003 · Cited by 128
Fortunati, E., Armentano, I., Iannoni, A., Barbale, M., Zaccheo, S., Scavone, M., Visai, L., & Kenny, J. M. (2011) · Journal of Applied Polymer Science · doi:10.1002/app.35039 · Cited by 127
Self-citationEnvironmental degradation of lignin/poly(hydroxybutyrate) blends
Mousavioun, P., George, G. A., & Doherty, W. O. S. (2012) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2012.04.004 · Cited by 120
van den Oever, M. J. A., Beck, B., & Müssig, J. (2010) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2010.07.011 · Cited by 96
Khabbaz, F., Karlsson, S., & Albertsson, A. (2000) · Journal of Applied Polymer Science · doi:10.1002/1097-4628(20001220)78:13<2369::aid-app140>3.0.co;2-n · Cited by 96
High-barrier coated bacterial cellulose nanowhiskers films with reduced moisture sensitivity
Martínez‐Sanz, M., López‐Rubio, A., & Lagaron, J. M. (2013) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2013.07.020 · Cited by 90
Patricio, P. S. D. O., Pereira, F. V., dos Santos, M. C., de Souza, P. P., Roa, J. P. B., & Oréfice, R. L. (2012) · Journal of Applied Polymer Science · doi:10.1002/app.37811 · Cited by 89
Carrasco, F., Gámez‐Pérez, J., Pérez, O. O. S., & Maspoch, M. L. (2011) · Chemical Engineering Journal · doi:10.1016/j.cej.2011.10.036 · Cited by 82
Arrieta, M. P., Parres, F. J., López, J., et al. (2013) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2013.01.017 · Cited by 82
Self-citationControlled degradation of polyhydroxybutyrate via alcoholysis with ethylene glycol or glycerol
Špitálský, Z., Lacík, I., Lathová, E., Janigová, I., & Chodák, I. (2005) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2005.06.019 · Cited by 81
Aranguren, M. I., Marcovich, N. E., Salgueiro, W., & Somoza, A. (2012) · Polymer Testing · doi:10.1016/j.polymertesting.2012.08.014 · Cited by 72
Westphal, C., Perrot, C., & Karlsson, S. (2001) · Polymer Degradation and Stability · doi:10.1016/s0141-3910(01)00089-1 · Cited by 62
Fortunati, E., Luzi, F., Puglia, D., Terenzi, A., Vercellino, M., Visai, L., Santulli, C., Torre, L., & Kenny, J. M. (2013) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2013.05.015 · Cited by 55
Self-citationPuglia, D., Fortunati, E., D’Amico, D. A., Manfredi, L. B., Cyras, V. P., & Kenny, J. M. (2013) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2013.11.013 · Cited by 54
Self-citationBiodegradation of Phormium tenax/poly(lactic acid) composites
Fortunati, E., Puglia, D., Santulli, C., Sarasini, F., & Kenny, J. M. (2012) · Journal of Applied Polymer Science · doi:10.1002/app.36839 · Cited by 53
Self-citationImproving mechanical performance of thermoplastic adhesion joints by atmospheric plasma
Fombuena, V., Balart, J., Boronat, T., Sánchez‐Nacher, L., & Sanoguera, D. G. (2012) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2012.11.031 · Cited by 48
López, M. D. M. C., de Dicastillo, C. L., Vilariño, J. M. L., & González-Rodríguez, M. V. (2013) · Journal of Agricultural and Food Chemistry · doi:10.1021/jf402670a · Cited by 36
Calvão, P. S., Chenal, J., Gauthier, C., Demarquette, N. R., Bogner, A., & Cavaillé, J. Y. (2011) · Polymer International · doi:10.1002/pi.3211 · Cited by 28
Jiménez, A., & Ruseckaite, R. A. (2006) · Journal of Thermal Analysis and Calorimetry · doi:10.1007/s10973-005-7452-7 · Cited by 25
Cited by
Poly(lactic acid)—Mass production, processing, industrial applications, and end of life
Castro-Aguirre, E., Iñiguez-Franco, F., Samsudin, H., Fang, X., & Auras, R. (2016) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2016.03.010 · Cited by 1,329
Meereboer, K. W., Misra, M., & Mohanty, A. K. (2020) · Green Chemistry · doi:10.1039/d0gc01647k · Cited by 965
Wu, F., Misra, M., & Mohanty, A. K. (2021) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2021.101395 · Cited by 909
Poly (lactic acid) blends: Processing, properties and applications
Nofar, M., Sacligil, D., Carreau, P. J., Kamal, M. R., & Heuzey, M.-C. (2019) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2018.12.002 · Cited by 780
Moisture and Oxygen Barrier Properties of Cellulose Nanomaterial-Based Films
Wang, J., Gardner, D. J., Stark, N. M., Bousfield, D. W., Tajvidi, M., & Cai, Z. (2018) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.7b03523 · Cited by 675
Metadata
- Authors
- Arrieta, M. P., Fortunati, E., Dominici, F., Rayón, E., López, J., & Kenny, J. M.
- Venue
- Polymer Degradation and Stability
- Publisher
- Elsevier BV
- Published
- 2014-09
- Volume
- 107
- Pages
- 139-149
- ISSN
- 0141-3910 (ISSN-L)
- OpenAlex
- W2081258128
- Cited by
- 325
- References
- 44
- FWCI
- 8.40
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.