The DOI matches its Crossref record; 44 of the 44 references it cites were found in a registry or an index.
PLA-PHB/cellulose based films: Mechanical, barrier and disintegration properties
Open accessAbstract
Nanocomposite films based on poly(lactic acid)-poly(hydroxybutyrate) (PLA-PHB) blends and synthesized cellulose nanocrystals (CNC) or surfactant modified cellulose nanocrystals (CNCs), as bio-based reinforcement, were prepared by melt extrusion followed by film forming. The obtained nanocomposites are intended for short-term food packaging. Thus, the mechanical, optical, barrier and wettability properties were studied. Functionalized CNCs contribute to enhance the interfacial adhesion between PLA and PHB, leading to improved mechanical stiffness and increased film stretchability. The synergic effects of the PHB and CNCs on the PLA barrier properties were confirmed by increases in oxygen barrier properties and reductions in surface wettability of the nanocomposites. In addition, the measurements of the viscosity molecular weight for ternary systems showed practically no degradation of PLA and smaller degradation of PHB during processing due to nanocrystal presence. The disintegration process in composting conditions of PLA was delayed by the addition of PHB, while CNC speeded it up. PLA-PHB-CNCs formulations showed enhanced mechanical performance, improved water resistance, reduced oxygen and UV-light transmission, as well as appropriate disintegration in compost suggesting possible applications as packaging materials.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
An Overview of Polylactides as Packaging Materials
Auras, R., Harte, B., & Selke, S. (2004) · Macromolecular Bioscience · doi:10.1002/mabi.200400043 · Cited by 3,454
Polymer biodegradation: Mechanisms and estimation techniques – A review
Lucas, N., Bienaime, C., Belloy, C., Queneudec, M., Silvestre, F., & Nava-Saucedo, J.-E. (2008) · Chemosphere · doi:10.1016/j.chemosphere.2008.06.064 · Cited by 1,384
Food packaging based on polymer nanomaterials
Silvestre, C., Duraccio, D., & Cimmino, S. (2011) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2011.02.003 · Cited by 937
Multifunctional nanostructured PLA materials for packaging and tissue engineering
Armentano, I., Bitinis, N., Fortunati, E., Mattioli, S., Rescignano, N., Verdejo, R., Lopez-Manchado, M. A., & Kenny, J. M. (2013) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2013.05.010 · Cited by 645
Self-citationFortunati, E., Armentano, I., Zhou, Q., Iannoni, A., Saino, E., Visai, L., Berglund, L. A., & Kenny, J. M. (2012) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2011.09.066 · Cited by 581
Self-citationPhysical, structural and antimicrobial properties of poly vinyl alcohol–chitosan biodegradable films
Bonilla, J., Fortunati, E., Atarés, L., Chiralt, A., & Kenny, J. M. (2014) · Food Hydrocolloids · doi:10.1016/j.foodhyd.2013.07.002 · Cited by 518
Self-citationFortunati, E., Peltzer, M., Armentano, I., Torre, L., Jiménez, A., & Kenny, J. M. (2012) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2012.06.025 · Cited by 494
Self-citationZhang, M., & Thomas, N. L. (2011) · Advances in Polymer Technology · doi:10.1002/adv.20235 · Cited by 373
Ternary PLA–PHB–Limonene blends intended for biodegradable food packaging applications
Arrieta, M. P., López, J., Hernández, A., & Rayón, E. (2014) · European Polymer Journal · doi:10.1016/j.eurpolymj.2013.11.009 · Cited by 369
Self-citationDisintegrability under composting conditions of plasticized PLA–PHB blends
Arrieta, M. P., López, J., Rayón, E., & Jiménez, A. (2014) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2014.01.034 · Cited by 325
Self-citation
Cited by
Poly(lactic acid)—Mass production, processing, industrial applications, and end of life
Castro-Aguirre, E., Iñiguez-Franco, F., Samsudin, H., Fang, X., & Auras, R. (2016) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2016.03.010 · Cited by 1,329
Meereboer, K. W., Misra, M., & Mohanty, A. K. (2020) · Green Chemistry · doi:10.1039/d0gc01647k · Cited by 965
Wu, F., Misra, M., & Mohanty, A. K. (2021) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2021.101395 · Cited by 909
Poly (lactic acid) blends: Processing, properties and applications
Nofar, M., Sacligil, D., Carreau, P. J., Kamal, M. R., & Heuzey, M.-C. (2019) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2018.12.002 · Cited by 780
Moisture and Oxygen Barrier Properties of Cellulose Nanomaterial-Based Films
Wang, J., Gardner, D. J., Stark, N. M., Bousfield, D. W., Tajvidi, M., & Cai, Z. (2018) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.7b03523 · Cited by 675
Polylactic acid blends: The future of green, light and tough
Hamad, K., Kaseem, M., Ayyoob, M., Joo, J., & Deri, F. (2018) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2018.07.001 · Cited by 640
Nanocellulose in Thin Films, Coatings, and Plies for Packaging Applications: A Review
Hubbe, M. A., Ferrer, A., Tyagi, P., Yin, Y., Salas, C., Pal, L., & Rojas, O. J. (2017) · BioResources · doi:10.15376/biores.12.1.2143-2233 · Cited by 508
Overview of Bacterial Cellulose Production and Application
Esa, F., Tasirin, S. M., & Rahman, N. A. (2014) · Agriculture and Agricultural Science Procedia · doi:10.1016/j.aaspro.2014.11.017 · Cited by 500
On the Use of PLA-PHB Blends for Sustainable Food Packaging Applications
Arrieta, M., Samper, M., Aldas, M., & López, J. (2017) · Materials · doi:10.3390/ma10091008 · Cited by 415
Self-citationTyagi, P., Salem, K. S., Hubbe, M. A., & Pal, L. (2021) · Trends in Food Science & Technology · doi:10.1016/j.tifs.2021.06.036 · Cited by 387
Liu, C., Li, B., Du, H., Lv, D., Zhang, Y., Yu, G., Mu, X., & Peng, H. (2016) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2016.06.025 · Cited by 382
High performance green barriers based on nanocellulose
Nair, S. S., Zhu, J., Deng, Y., & Ragauskas, A. J. (2014) · Sustainable Chemical Processes · doi:10.1186/s40508-014-0023-0 · Cited by 368
Bionanocomposite films based on plasticized PLA–PHB/cellulose nanocrystal blends
Arrieta, M. P., Fortunati, E., Dominici, F., López, J., & Kenny, J. M. (2015) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2014.12.056 · Cited by 360
Self-citationYang, W., Fortunati, E., Dominici, F., Giovanale, G., Mazzaglia, A., Balestra, G. M., Kenny, J. M., & Puglia, D. (2016) · European Polymer Journal · doi:10.1016/j.eurpolymj.2016.04.003 · Cited by 263
Self-citationArrieta, M. P., Castro-López, M. D. M., Rayón, E., Barral-Losada, L. F., López-Vilariño, J. M., López, J., & González-Rodríguez, M. V. (2014) · Journal of Agricultural and Food Chemistry · doi:10.1021/jf5029812 · Cited by 196
Self-citationLuzi, F., Fortunati, E., Puglia, D., Petrucci, R., Kenny, J. M., & Torre, L. (2015) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2015.08.016 · Cited by 128
Self-citationGonzalez Ausejo, J., Rydz, J., Musioł, M., Sikorska, W., Sobota, M., Włodarczyk, J., Adamus, G., Janeczek, H., Kwiecień, I., Hercog, A., et al. (2018) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2018.04.024 · Cited by 117
Sessini, V., Navarro-Baena, I., Arrieta, M. P., Dominici, F., López, D., Torre, L., Kenny, J. M., Dubois, P., Raquez, J.-M., & Peponi, L. (2018) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2018.04.012 · Cited by 111
Self-citationArrieta, M. P., López, J., López, D., Kenny, J. M., & Peponi, L. (2016) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2016.02.027 · Cited by 106
Self-citationProcessing of edible films based on nanoreinforced gelatinized starch
Sessini, V., Arrieta, M. P., Kenny, J. M., & Peponi, L. (2016) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2016.02.026 · Cited by 106
Self-citationManufacturing and compatibilization of PLA/PBAT binary blends by cottonseed oil-based derivatives
Carbonell-Verdu, A., Ferri, J. M., Dominici, F., Boronat, T., Sanchez-Nacher, L., Balart, R., & Torre, L. (2018) · Express Polymer Letters · doi:10.3144/expresspolymlett.2018.69 · Cited by 91
“For this reason, industrial PLA and other polymer formulations usually contain several additives with different purposes thus widening its use in sectors such as agriculture [2], packaging [3, 4], medical devices [5], 3D printing, textile fibers [6].”
BackgroundSelf-citationArrieta, M. P., Sessini, V., & Peponi, L. (2017) · European Polymer Journal · doi:10.1016/j.eurpolymj.2017.06.047 · Cited by 55
Self-citationTrivedi, A. K., & Gupta, M. K. (2024) · Scientific Reports · doi:10.1038/s41598-024-71619-5 · Cited by 49
Navarro-Baena, I., Arrieta, M. P., Sonseca, A., Torre, L., López, D., Giménez, E., Kenny, J. M., & Peponi, L. (2015) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2015.09.002 · Cited by 38
Self-citationGalera Manzano, L. M., Ruz Cruz, M. Á., Moo Tun, N. M., Valadez González, A., & Mina Hernandez, J. H. (2021) · Polymers · doi:10.3390/polym13111855 · Cited by 36
Metadata
- Authors
- Arrieta, M. P., Fortunati, E., Dominici, F., Rayón, E., López, J., & Kenny, J. M.
- Venue
- Polymer Degradation and Stability
- Publisher
- Elsevier BV
- Published
- 2014-09
- Volume
- 107
- Pages
- 139-149
- ISSN
- 0141-3910 (ISSN-L)
- OpenAlex
- W2081258128
- Cited by
- 325
- References
- 44
- FWCI
- 8.40
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.