The DOI matches its Crossref record; 34 of the 34 references it cites were found in a registry or an index.
Insights into the mechanical properties of several triply periodic minimal surface lattice structures made by polymer additive manufacturing
Open accessAbstract
Three-dimensional lattices have applications across a range of fields including structural lightweighting, impact absorption and biomedicine. In this work, lattices based on triply periodic minimal surfaces were produced by polymer additive manufacturing and examined with a combination of experimental and computational methods. This investigation elucidates their deformation mechanisms and provides numerical parameters crucial in establishing relationships between their geometries and mechanical performance. Three types of lattice were examined, with one, known as the primitive lattice, being found to have a relative elastic modulus over twice as large as those of the other two. The deformation process of the primitive lattice was also considerably different from those of the other two, exhibiting strut stretching and buckling, while the gyroid and diamond lattices deformed in a bending dominated manner. Finite element predictions of the stress distributions in the lattices under compressive loading agreed with experimental observations. These results can be used to create better informed lattice designs for a range of mechanical and biomedical applications.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Cellular solids structure and properties
Gibson, L. J., Ashby, M. F., et al. (1997) · Cited by 9,172
Cellular solids: Structure and properties
Wolcott, M. P. (1990) · Materials Science and Engineering: A · doi:10.1016/0921-5093(90)90295-e · Cited by 5,926
Ashby, M., Evans, A., Fleck, N., Gibson, L., Hutchinson, J., Wadley, H., & Delale, F. (2001) · Applied Mechanics Reviews · doi:10.1115/1.1421119 · Cited by 2,694
Ashby, M. F., Evans, A., Fleck, N. A., Gibson, L. J., Hutchinson, J. W., & Wadley, H. N. G. (2002) · Materials & Design · doi:10.1016/s0261-3069(01)00049-8 · Cited by 2,367
Ultralight, ultrastiff mechanical metamaterials
Zheng, X., Lee, H., Weisgraber, T. H., Shusteff, M., DeOtte, J., Duoss, E. B., Kuntz, J. D., Biener, M. M., Ge, Q., Jackson, J. A., et al. (2014) · Science · doi:10.1126/science.1252291 · Cited by 2,308
The properties of foams and lattices
Ashby, M. F. (2006) · Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences · doi:10.1098/rsta.2005.1678 · Cited by 1,771
Effective properties of the octet-truss lattice material
Deshpande, V. S., Fleck, N. A., & Ashby, M. F. (2001) · Journal of the Mechanics and Physics of Solids · doi:10.1016/s0022-5096(01)00010-2 · Cited by 1,741
The topological design of multifunctional cellular metals
Evans, A. G., Hutchinson, J. W., Fleck, N. A., Ashby, M. F., & Wadley, H. N. G. (2001) · Progress in Materials Science · doi:10.1016/s0079-6425(00)00016-5 · Cited by 1,134
Yan, C., Hao, L., Hussein, A., & Young, P. (2015) · Journal of the Mechanical Behavior of Biomedical Materials · doi:10.1016/j.jmbbm.2015.06.024 · Cited by 717
Heat transfer in open-cell metal foams
Lu, T. J., Stone, H. A., & Ashby, M. F. (1998) · Acta Materialia · doi:10.1016/s1359-6454(98)00031-7 · Cited by 603
Minimal surface scaffold designs for tissue engineering
Kapfer, S. C., Hyde, S. T., Mecke, K., Arns, C. H., & Schröder-Turk, G. E. (2011) · Biomaterials · doi:10.1016/j.biomaterials.2011.06.012 · Cited by 579
Compressive failure modes and energy absorption in additively manufactured double gyroid lattices
Maskery, I., Aboulkhair, N. T., Aremu, A. O., Tuck, C. J., & Ashcroft, I. A. (2017) · Additive Manufacturing · doi:10.1016/j.addma.2017.04.003 · Cited by 575
Self-citationMathematically defined tissue engineering scaffold architectures prepared by stereolithography
Melchels, F. P. W., Bertoldi, K., Gabbrielli, R., Velders, A. H., Feijen, J., & Grijpma, D. W. (2010) · Biomaterials · doi:10.1016/j.biomaterials.2010.05.068 · Cited by 530
A Bicontinuous Double Gyroid Hybrid Solar Cell
Crossland, E. J. W., Kamperman, M., Nedelcu, M., Ducati, C., Wiesner, U., Smilgies, D. M., Toombes, G. E. S., Hillmyer, M. A., Ludwigs, S., Steiner, U., et al. (2009) · Nano Letters · doi:10.1021/nl803174p · Cited by 490
Current trends in the design of scaffolds for computer-aided tissue engineering
Giannitelli, S. M., Accoto, D., Trombetta, M., & Rainer, A. (2014) · Acta Biomaterialia · doi:10.1016/j.actbio.2013.10.024 · Cited by 451
RAJAGOPALAN, S., & ROBB, R. (2006) · Medical Image Analysis · doi:10.1016/j.media.2006.06.001 · Cited by 392
An investigation into reinforced and functionally graded lattice structures
Maskery, I., Hussey, A., Panesar, A., Aremu, A., Tuck, C., Ashcroft, I., & Hague, R. (2017) · Journal of Cellular Plastics · doi:10.1177/0021955x16639035 · Cited by 339
Self-citationYan, C., Hao, L., Hussein, A., Young, P., Huang, J., & Zhu, W. (2015) · Materials Science and Engineering: A · doi:10.1016/j.msea.2015.01.063 · Cited by 329
Effective conductivities and elastic moduli of novel foams with triply periodic minimal surfaces
Abueidda, D. W., Abu Al-Rub, R. K., Dalaq, A. S., Lee, D.-W., Khan, K. A., & Jasiuk, I. (2016) · Mechanics of Materials · doi:10.1016/j.mechmat.2016.01.004 · Cited by 317
Next Generation Orthopaedic Implants by Additive Manufacturing Using Electron Beam Melting
Murr, L. E., Gaytan, S. M., Martinez, E., Medina, F., & Wicker, R. B. (2012) · International Journal of Biomaterials · doi:10.1155/2012/245727 · Cited by 306
Afshar, M., Anaraki, A. P., Montazerian, H., & Kadkhodapour, J. (2016) · Journal of the Mechanical Behavior of Biomedical Materials · doi:10.1016/j.jmbbm.2016.05.027 · Cited by 289
Zhang, P., Toman, J., Yu, Y., Biyikli, E., Kırca, M., Chmielus, M., & To, A. C. (2014) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.4028724 · Cited by 248
An investigation into the compressive properties of stainless steel micro-lattice structures
Ushijima, K., Cantwell, W., Mines, R., Tsopanos, S., & Smith, M. (2011) · Journal of Sandwich Structures & Materials · doi:10.1177/1099636210380997 · Cited by 232
Blanquer, S. B. G., Werner, M., Hannula, M., Sharifi, S., Lajoinie, G. P. R., Eglin, D., Hyttinen, J., Poot, A. A., & Grijpma, D. W. (2017) · Biofabrication · doi:10.1088/1758-5090/aa6553 · Cited by 195
Enhanced Electrochromism in Gyroid‐Structured Vanadium Pentoxide
Scherer, M. R. J., Li, L., Cunha, P. M. S., Scherman, O. A., & Steiner, U. (2012) · Advanced Materials · doi:10.1002/adma.201104272 · Cited by 187
Yoo, D.-J. (2014) · International Journal of Precision Engineering and Manufacturing · doi:10.1007/s12541-014-0516-5 · Cited by 175
The design of impact absorbing structures for additive manufacture
Brennan-Craddock, J. P. J., Brackett, D., Wildman, R. D., & Hague, R. (2012) · Journal of Physics Conference Series · doi:10.1088/1742-6596/382/1/012042 · Cited by 135
Self-citationDalaq, A. S., Abueidda, D., Al‐Rub, R. K. A., & Jasiuk, I. (2016) · International Journal of Solids and Structures · doi:10.1016/j.ijsolstr.2016.01.011 · Cited by 135
Yoo, D.-J., & Kim, K.-H. (2015) · International Journal of Precision Engineering and Manufacturing · doi:10.1007/s12541-015-0263-2 · Cited by 131
Cross flow heat exchange of textile cellular metal core sandwich panels
Tian, J., Lu, T. J., HODSON, H. P., Queheillalt, D. T., & Wadley, H. N. G. (2007) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2006.11.042 · Cited by 122
Heterogeneous porous scaffold design for tissue engineering using triply periodic minimal surfaces
Yoo, D.-J. (2012) · International Journal of Precision Engineering and Manufacturing · doi:10.1007/s12541-012-0068-5 · Cited by 96
Thermal Applications of Cellular Lattice Structures
Wadley, H. N. G., & Queheillalt, D. T. (2007) · Materials science forum · doi:10.4028/www.scientific.net/msf.539-543.242 · Cited by 90
Yoo, D.-J. (2012) · Medical Engineering & Physics · doi:10.1016/j.medengphy.2012.05.008 · Cited by 87
A Comparative Finite Element Study of Cubic Unit Cells for Selective Laser Melting
Aremu, A., Maskery, I., Tuck, C. J., Ashcroft, I., Wildman, R. D., & Hague, R. (2014) · Cited by 38
Self-citation
Cited by
SLM lattice structures: Properties, performance, applications and challenges
Maconachie, T., Leary, M., Lozanovski, B., Zhang, X., Qian, M., Faruque, O., & Brandt, M. (2019) · Materials & Design · doi:10.1016/j.matdes.2019.108137 · Cited by 1,497
Multifunctional Mechanical Metamaterials Based on Triply Periodic Minimal Surface Lattices
Al-Ketan, O., & Abu Al-Rub, R. K. (2019) · Advanced Engineering Materials · doi:10.1002/adem.201900524 · Cited by 887
Feng, J., Fu, J., Yao, X., & He, Y. (2022) · International Journal of Extreme Manufacturing · doi:10.1088/2631-7990/ac5be6 · Cited by 813
Design and Optimization of Lattice Structures: A Review
Pan, C., Han, Y., & Lu, J. (2020) · Applied Sciences · doi:10.3390/app10186374 · Cited by 640
Properties and applications of additively manufactured metallic cellular materials: A review
du Plessis, A., Razavi, N., Benedetti, M., Murchio, S., Leary, M., Watson, M., Bhate, D., & Berto, F. (2022) · Progress in Materials Science · doi:10.1016/j.pmatsci.2021.100918 · Cited by 623
Metadata
- Authors
- Maskery, I., Sturm, L., Aremu, A. O., Panesar, A., Williams, C. B., Tuck, C. J., Wildman, R. D., Ashcroft, I. A., & Hague, R. J. M.
- Venue
- Polymer
- Publisher
- Elsevier BV
- Published
- 2018-09
- Volume
- 152
- Pages
- 62-71
- ISSN
- 0032-3861 (ISSN-L)
- OpenAlex
- W2775354423
- Cited by
- 728
- References
- 34
- FWCI
- 24.89
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.