The DOI matches its Crossref record; 30 of the 30 references it cites were found in a registry or an index.
Mechanical properties and water absorption behaviour of recycled cellulose fibre reinforced epoxy composites
Abstract
Abstract Recycled cellulose fibre (RCF) reinforced epoxy composites were fabricated with fibre loadings of 19, 28, 40 and 46 wt%. Results showed that flexural strength, flexural modulus, fracture toughness and impact strength increased as the fibre content increased. The ultimate mechanical properties were achieved with a fibre content of 46 wt%. The effect of water absorption on mechanical and physical properties of RCF/epoxy composites was investigated. The values of maximum water uptake and diffusion coefficient were found to increase with an increase in fibre content. Flexural strength, modulus and fracture toughness decreased as a result of moisture absorption. However, the impact strength was found to increase slightly after water absorption. XRD, FTIR and SEM studies were carried out to evaluate the composition and microstructure of RCF and RCF/epoxy composites.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Park, S., Baker, J. O., Himmel, M. E., Parilla, P. A., & Johnson, D. K. (2010) · Biotechnology for Biofuels · doi:10.1186/1754-6834-3-10 · Cited by 3,395
Natural fibres: Can they replace glass in fibre reinforced plastics?
Wambua, P., Ivens, J., & Verpoest, I. (2003) · Composites Science and Technology · doi:10.1016/s0266-3538(03)00096-4 · Cited by 2,676
Chemical modification of hemp, sisal, jute, and kapok fibers by alkalization
Mwaikambo, L. Y., & Ansell, M. P. (2002) · Journal of Applied Polymer Science · doi:10.1002/app.10460 · Cited by 1,694
DHAKAL, H., ZHANG, Z., & RICHARDSON, M. (2007) · Composites Science and Technology · doi:10.1016/j.compscitech.2006.06.019 · Cited by 1,622
Rong, M. Z., Zhang, M. Q., Liu, Y., Yang, G. C., & Zeng, H. M. (2001) · Composites Science and Technology · doi:10.1016/s0266-3538(01)00046-x · Cited by 1,047
FTIR analysis of cellulose treated with sodium hydroxide and carbon dioxide
Oh, S. Y., Yoo, D. I., Shin, Y., & Seo, G. (2005) · Carbohydrate Research · doi:10.1016/j.carres.2004.11.027 · Cited by 1,023
Characterization of natural fiber surfaces and natural fiber composites
Sgriccia, N., Hawley, M. C., & Misra, M. (2008) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2008.07.007 · Cited by 954
Dynamic mechanical analysis of banana fiber reinforced polyester composites
Pothan, L. A., Oommen, Z., & Thomas, S. (2003) · Composites Science and Technology · doi:10.1016/s0266-3538(02)00254-3 · Cited by 925
Studies on mechanical performance of biofibre/glass reinforced polyester hybrid composites
Mishra, S., Mohanty, A. K., Drzal, L. T., Misra, M., Parija, S., Nayak, S. K., & Tripathy, S. S. (2003) · Composites Science and Technology · doi:10.1016/s0266-3538(03)00084-8 · Cited by 873
A study of the effect of acetylation and propionylation surface treatments on natural fibres
Tserki, V., Zafeiropoulos, N. E., Simon, F., & Panayiotou, C. (2005) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2005.01.004 · Cited by 621
Cited by
Recent advances in biodegradable polymers for sustainable applications
Samir, A., Ashour, F. H., Hakim, A. A. A., & Bassyouni, M. (2022) · npj Materials Degradation · doi:10.1038/s41529-022-00277-7 · Cited by 1,209
Gholampour, A., & Ozbakkaloglu, T. (2020) · Journal of Materials Science · doi:10.1007/s10853-019-03990-y · Cited by 1,058
Processing and characterization of natural cellulose fibers/thermoset polymer composites
Thakur, V. K., & Thakur, M. K. (2014) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2014.03.039 · Cited by 990
Recent advances in epoxy resin, natural fiber-reinforced epoxy composites and their applications
Saba, N., Jawaid, M., Alothman, O. Y., Paridah, M., & Hassan, A. (2016) · Journal of Reinforced Plastics and Composites · doi:10.1177/0731684415618459 · Cited by 487
Gorgin, R., Luo, Y., & Wu, Z. (2020) · Ultrasonics · doi:10.1016/j.ultras.2020.106114 · Cited by 285
Suriani, M. J., Ilyas, R. A., Zuhri, M. Y. M., Khalina, A., Sultan, M. T. H., Sapuan, S. M., Ruzaidi, C. M., Wan, F. N., Zulkifli, F., Harussani, M. M., et al. (2021) · Polymers · doi:10.3390/polym13203514 · Cited by 285
Haghighatnia, T., Abbasian, A., & Morshedian, J. (2017) · Industrial Crops and Products · doi:10.1016/j.indcrop.2017.07.020 · Cited by 123
Metadata
- Authors
- Alamri, H., & Low, I. M.
- Venue
- Polymer Testing
- Publisher
- Elsevier BV
- Published
- 2012-08
- Volume
- 31
- Issue
- 5
- Pages
- 620-628
- ISSN
- 0142-9418 (ISSN-L)
- OpenAlex
- W2041506826
- Cited by
- 305
- References
- 30
- FWCI
- 10.06
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.