Biomass combustion technology development – It is all about chemical details
Open accessThe DOI matches its Crossref record; 12 of the 12 references it cites were found in a registry or an index.
Abstract
Abstract Biomass fuels differ in many ways from the conventional fossil fuels used in combustion processes, such as coal. They often have high moisture contents, lower heating values, and a variety of minor constituents, such as chlorine, sulfur, phosphorus, nitrogen, and a variety of ash-forming metals. These special properties of biomass fuels cause several challenges, but in many cases also provide advantages, to their use in combustion processes. Design of the combustion devices and choice of their operating parameters are very dependent on the detailed properties of the biomass fuel or fuels to be used. Often these challenges are connected to the fate and chemistry of the many minor constituents or impurities of the fuels. This paper reviews some of such chemical details related to biomass combustion that are important to take into consideration in the use of biomass combustion processes. The focus of the paper is in large, industrial scale combustion technologies for biomass and biomass derived waste fuels, either in district heating or also power production. Areas discussed are biomass particle conversion and biomass char oxidation reactivity, nitrogen and sulfur reactions in furnaces, superheater fouling and corrosion due to biomass ashes, low-temperature corrosion, and bed sintering in fluidized bed furnaces. The advances in understanding chemical details of biomass combustion have strongly contributed to the development of more reliable and efficient boiler technologies. Unresolved challenges are still connected to simultaneous combustion of several different biomasses and interaction of fuel ashes in such applications.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
The behavior of inorganic material in biomass-fired power boilers: field and laboratory experiences
Baxter, L. L., Miles, T. R., Miles, T. R., Jenkins, B. M., Milne, T., Dayton, D., Bryers, R. W., & Oden, L. L. (1998) · Fuel Processing Technology · doi:10.1016/s0378-3820(97)00060-x · Cited by 669
Grabke, H. J., Reese, E., & Spiegel, M. (1995) · Corrosion Science · doi:10.1016/0010-938x(95)00011-8 · Cited by 537
Mechanism and modeling of the formation of gaseous alkali sulfates
Glarborg, P., & Marshall, P. (2005) · Combustion and Flame · doi:10.1016/j.combustflame.2004.08.014 · Cited by 260
KCl Induced Corrosion of a 304-type Austenitic Stainless Steel at 600°C; The Role of Potassium
Pettersson, J., Asteman, H., Svensson, J. E., & Johansson, L. G. (2005) · Oxidation of Metals · doi:10.1007/s11085-005-5704-3 · Cited by 182
Sulfation of Potassium Chloride at Combustion Conditions
Iisa, K., Lu, Y., & Salmenoja, K. (1999) · Energy & Fuels · doi:10.1021/ef990057a · Cited by 169
Skrifvars, B.-J., Backman, R., Hupa, M., Salmenoja, K., & Vakkilainen, E. (2008) · Corrosion Science · doi:10.1016/j.corsci.2008.01.010 · Cited by 155
Self-citationReaction kinetics and mass transfer studies of biomass char gasification with CO2
Mani, T., Mahinpey, N., & Murugan, P. (2011) · Chemical Engineering Science · doi:10.1016/j.ces.2010.09.033 · Cited by 146
Pettersson, J., Folkeson, N., Johansson, L.-G., & Svensson, J.-E. (2011) · Oxidation of Metals · doi:10.1007/s11085-011-9240-z · Cited by 117
Davidsson, K. O., Åmand, L.-E., Leckner, B., Kovacevik, B., Svane, M., Hagström, M., Pettersson, J. B. C., Pettersson, J., Asteman, H., Svensson, J.-E., et al. (2007) · Energy & Fuels · doi:10.1021/ef060306c · Cited by 92
Jonsson, T., Froitzheim, J., Pettersson, J., Svensson, J.-E., Johansson, L.-G., & Halvarsson, M. (2009) · Oxidation of Metals · doi:10.1007/s11085-009-9156-z · Cited by 76
Skrifvars, B.-J., Westén-Karlsson, M., Hupa, M., & Salmenoja, K. (2010) · Corrosion Science · doi:10.1016/j.corsci.2009.11.026 · Cited by 70
Self-citationLehmusto, J., Skrifvars, B.-J., Yrjas, P., & Hupa, M. (2013) · Fuel Processing Technology · doi:10.1016/j.fuproc.2011.12.016 · Cited by 68
Self-citation
Cited by
Ma, W., Wenga, T., Frandsen, F. J., Yan, B., & Chen, G. (2020) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2019.100789 · Cited by 275
A Combined Overview of Combustion, Pyrolysis, and Gasification of Biomass
Akhtar, A., Krepl, V., & Ivanova, T. (2018) · Energy & Fuels · doi:10.1021/acs.energyfuels.8b01678 · Cited by 243
Mechanisms and mitigation of agglomeration during fluidized bed combustion of biomass: A review
Morris, J. D., Daood, S. S., Chilton, S., & Nimmo, W. (2018) · Fuel · doi:10.1016/j.fuel.2018.04.098 · Cited by 170
Wang, L., Barta-Rajnai, E., Skreiberg, Ø., Khalil, R., Czégény, Z., Jakab, E., Barta, Z., & Grønli, M. (2018) · Applied Energy · doi:10.1016/j.apenergy.2017.07.024 · Cited by 160
Antonkiewicz, J., Popławska, A., Kołodziej, B., Ciarkowska, K., Gambuś, F., Bryk, M., & Babula, J. (2020) · Journal of Environmental Management · doi:10.1016/j.jenvman.2020.110450 · Cited by 90
Metadata
- Authors
- Hupa, M., Karlström, O., & Vainio, E.
- Venue
- Proceedings of the Combustion Institute
- Publisher
- Elsevier BV
- Published
- 2017
- Volume
- 36
- Issue
- 1
- Pages
- 113-134
- ISSN
- 1540-7489 (ISSN-L)
- OpenAlex
- W2522306315
- Cited by
- 251
- References
- 12
- FWCI
- 7.75
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.