Tool Wear Analyses in Low Frequency Vibration Assisted Drilling of CFRP/Ti6Al4V Stack Material
Open accessThe DOI matches its Crossref record.
Abstract
Drilling of fiber-metal compound materials is one of the most challenging machining operations. Besides frequently occurring damages of the borehole surface tool wear is a major concern when drilling compound stacks. The significantly divergent cutting conditions of fiber reinforced plastics and metallic alloys require compromises in the tool geometry as well as the cutting materials and coatings. Excessive cutting edge rounding due to the brittle and abrasive fibers leads to increasing cutting forces and temperatures in the metallic alloy. This usually results in a catastrophic failure of the tools. In the present study low frequency vibration assisted drilling (LFVAD) of CFRP/Ti6Al4 V [10/10 mm] was investigated in terms of tool wear and compared to conventional drilling. Solid carbide drills with a diameter of 4.8 mm and different CVD and PVD coatings have been tested. The flank wear as well as the adhesions at the cutting edges have found to be significantly lower when using LFVAD. The tool life could be increased by more than 300% compared to conventional drilling. This is based on considerably lower process temperatures and an improvement of the process stability which could be proved by cutting force measurements. Additionally the chip extraction was found to be more efficient due to the generation of small chip segments which is a consequence of the interrupted cut. Best results in terms of tool wear and borehole quality have been achieved with an AlCrN coating.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
High performance cutting of advanced aerospace alloys and composite materials
M'Saoubi, R., Axinte, D., Soo, S. L., Nobel, C., Attia, H., Kappmeyer, G., Engin, S., & Sim, W.-M. (2015) · CIRP Annals · doi:10.1016/j.cirp.2015.05.002 · Cited by 567
Delamination formation, evaluation and suppression during drilling of composite laminates: A review
Geng, D., Liu, Y., Shao, Z., Lu, Z., Cai, J., Li, X., Jiang, X., & Zhang, D. (2019) · Composite Structures · doi:10.1016/j.compstruct.2019.02.099 · Cited by 465
Experimental study on mechanical drilling of carbon/epoxy composite-Ti6Al4V stacks
Xu, J., Zhou, L., Chen, M., & Ren, F. (2019) · Materials and Manufacturing Processes · doi:10.1080/10426914.2019.1594275 · Cited by 80
Investigation of minimum quantity lubrication effects in drilling CFRP/Ti6Al4V stacks
Xu, J., Ji, M., Chen, M., & Ren, F. (2019) · Materials and Manufacturing Processes · doi:10.1080/10426914.2019.1661431 · Cited by 73
Orthogonal cutting mechanisms of CFRP/Ti6Al4V stacks
Xu, J., El Mansori, M., Chen, M., & Ren, F. (2019) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-019-03734-x · Cited by 34
Metadata
- Authors
- Pecat, O., & Brinksmeier, E.
- Venue
- Procedia CIRP
- Publisher
- Elsevier BV
- Published
- 2014
- Volume
- 14
- Pages
- 142-147
- ISSN
- 2212-8271 (ISSN-L)
- OpenAlex
- W2073851213
- Cited by
- 123
- References
- 0
- FWCI
- 8.57
- Type
- journal article
- Language
- en
- Open access
- diamond
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Tool Wear Analyses in Low Frequency Vibration Assisted Drilling of CFRP/Ti6Al4V Stack Material. https://app.cochat.ai/papers/10.1016/j.procir.2014.03.050
- The paper
- Pecat, O., & Brinksmeier, E. (2014). Tool Wear Analyses in Low Frequency Vibration Assisted Drilling of CFRP/Ti6Al4V Stack Material. Procedia CIRP. https://doi.org/10.1016/j.procir.2014.03.050
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.