Study on Tool Wear and Chip Formation During Drilling Carbon Fiber Reinforced Polymer (CFRP)/Titanium Alloy (Ti6Al4V) Stacks
Open accessThe DOI matches its Crossref record.
Abstract
Composites are used in conjunction with another material to form a multi-material stack-up, which results in greater strength to weight ratios. In a wide range of aerospace applications dissimilar material stack-ups of composites and aluminium and/or titanium are used. Drilling is probably the most common machining operation applied to composites since components made out of composite materials are usually near net shaped and require only holes for assembly integration. In this investigation, experiments were conducted by varying the drilling parameters and determining the optimum cutting conditions for drilling of CFRP/Ti stacks using Genetic Algorithm (GA) optimization technique. Tool wear study was performed by drilling 100 holes each with 118° and 130° point angle drills. Less progressive tool wear and better chip evacuation was achievable in 130° point angle drills when compared with 118°point angle drills.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Recent advances in drilling hybrid FRP/Ti composite: A state-of-the-art review
Xu, J., Mkaddem, A., & El Mansori, M. (2016) · Composite Structures · doi:10.1016/j.compstruct.2015.09.028 · Cited by 242
“[49] examined the effects of point angle on tool performance when drilling of CFRP/Ti stack by using 118 and 130 point angle drills.”
Experimental study on drilling mechanisms and strategies of hybrid CFRP/Ti stacks
Xu, J., & El Mansori, M. (2016) · Composite Structures · doi:10.1016/j.compstruct.2016.07.025 · Cited by 162
Evaluation of novel tool geometries in dry drilling aluminium 2024-T351/titanium Ti6Al4V stack
Zhu, Z., Guo, K., Sun, J., Li, J., Liu, Y., Zheng, Y., & Chen, L. (2018) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2018.04.044 · Cited by 84
Experimental study on mechanical drilling of carbon/epoxy composite-Ti6Al4V stacks
Xu, J., Zhou, L., Chen, M., & Ren, F. (2019) · Materials and Manufacturing Processes · doi:10.1080/10426914.2019.1594275 · Cited by 80
Influence of flute number and stepped bit geometry when drilling CFRP/Ti6Al4V stacks
Alonso, U., Calamaz, M., Girot, F., & Iriondo, E. (2019) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2019.02.006 · Cited by 46
Orthogonal cutting mechanisms of CFRP/Ti6Al4V stacks
Xu, J., El Mansori, M., Chen, M., & Ren, F. (2019) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-019-03734-x · Cited by 34
Kim, D., Swan, S. R., He, B., Khominich, V., Bell, E., Lee, S.-W., & Kim, T.-G. (2021) · Carbon Letters · doi:10.1007/s42823-020-00180-8 · Cited by 22
Combined effects of various materials on tool wear in drilling of Ti/CFRP stacks
Wang, Q., Wang, F., Zhang, C., & Chen, C. (2020) · Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science · doi:10.1177/0954406219868246 · Cited by 15
“Since stacks components are usually joined by bolted or riveted, a large number of holes need to be machined on Ti/CFRP stacks, and the quality of the connecting holes will directly affect the safety and reliability of the equipment.(6,7) But due to the fact that these two materials are difficult to machine and have d…”
Background
Metadata
- Authors
- SenthilKumar, M., Prabukarthi, A., & Krishnaraj, V.
- Venue
- Procedia Engineering
- Publisher
- Elsevier BV
- Published
- 2013
- Volume
- 64
- Pages
- 582-592
- ISSN
- 1877-7058 (ISSN-L)
- OpenAlex
- W1985796523
- Cited by
- 107
- References
- 0
- FWCI
- 14.31
- Type
- conference paper
- Language
- en
- Open access
- diamond
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.