Study on Separation of Cobalt and Lithium Salts from Waste Mobile-phone Batteries
Open accessThe DOI matches its Crossref record.
Abstract
The metals in waste mobile-phone batteries may cause environmental pollution. In this paper, leaching with H2SO4+H2O2, P507 extraction, and sedimentation with oxalic acid and carbonic acid were used to deal with waste batteries and obtain cobalt and lithium salts by separation, which shows an easy and feasible method with less waste water disposal. The effects of sulphuric acid concentration, pH value, and lithium ions on the recovery were investigated. When the sulphuric acid concentration was over 0.4 mol/L, the loss of cobalt increased significantly. If pH value of 3.5 was used, it was easy for cobalt and lithium separation with a low cobalt loss. Over several recycles, the recovery of lithium could reach the maximum with the lithium ion concentration of 27.3 g/L. The recovery efficiencies for cobalt and lithium were 90.02% and 86.04%, respectively.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Meshram, P., Pandey, B. D., & Mankhand, T. R. (2014) · Hydrometallurgy · doi:10.1016/j.hydromet.2014.10.012 · Cited by 982
“CoC2O4·2H2O and Li2CO3 were also produced by a combination of acid leaching, SX and precipitation from spent mobile phone batteries (Jian et al., 2012).”
BackgroundNovel approach to recover cobalt and lithium from spent lithium-ion battery using oxalic acid
Zeng, X., Li, J., & Shen, B. (2015) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2015.02.064 · Cited by 571
Gu, F., Guo, J., Yao, X., Summers, P. A., Widijatmoko, S. D., & Hall, P. (2017) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2017.05.181 · Cited by 310
Self-citationChoubey, P. K., Chung, K.-S., Kim, M.-S., Lee, J.-C., & Srivastava, R. R. (2017) · Minerals Engineering · doi:10.1016/j.mineng.2017.04.008 · Cited by 290
Pinna, E. G., Ruiz, M. C., Ojeda, M. W., & Rodriguez, M. H. (2017) · Hydrometallurgy · doi:10.1016/j.hydromet.2016.10.024 · Cited by 289
Recovery of Cobalt from Spent Lithium-Ion Mobile Phone Batteries Using Liquid–Liquid Extraction
Quintero-Almanza, D., Gamiño-Arroyo, Z., Sánchez-Cadena, L. E., Gómez-Castro, F. I., Uribe-Ramírez, A. R., Aguilera-Alvarado, A. F., & Ocampo Carmona, L. M. (2019) · Batteries · doi:10.3390/batteries5020044 · Cited by 39
Recovery of Lithium from Simulated Secondary Resources (LiCO3) through Solvent Extraction
Waengwan, P., & Eksangsri, T. (2020) · Sustainability · doi:10.3390/su12177179 · Cited by 24
Metadata
- Authors
- Jian, G., Guo, J., Wang, X., Sun, C., Zhou, Z., Yu, L., Kong, F., & Qiu, J.-R.
- Venue
- Procedia Environmental Sciences
- Publisher
- Elsevier BV
- Published
- 2012
- Volume
- 16
- Pages
- 495-499
- ISSN
- 1878-0296 (ISSN-L)
- OpenAlex
- W2084692430
- Cited by
- 27
- References
- 0
- FWCI
- 1.47
- Type
- journal article
- Language
- en
- Open access
- diamond
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.