The DOI matches its Crossref record; 19 of the 19 references it cites were found in a registry or an index.
Printing accuracy, mechanical properties, surface characteristics, and microbial adhesion of 3D-printed resins with various printing orientations
Abstract
STATEMENT OF PROBLEM Printing orientation is an important decision in the initial steps of additive manufacturing, affecting printing accuracy and the mechanical properties of printed products. In addition, printing orientation determines the building direction of layers and the layer-by-layer configuration forming the surface geometry. PURPOSE The purpose of this in vitro study was to evaluate the effect of printing orientation on the printing accuracy, flexural strength, surface characteristics, and microbial response of 3D-printed denture base resin. MATERIAL AND METHODS Specimens were printed with denture base polymethyl methacrylate (PMMA) in 3 printing orientations (0, 45, and 90 degrees). The printing error rate, flexural strength, roughness, hydrophilicity, surface energy, and response to Candida albicans (C. albicans) were evaluated. RESULTS Specimens printed at a 90-degree orientation showed the lowest error rates for length (P<.001), and those printed at a 45-degree orientation showed statistically higher error rates for thickness than those of other groups (P<.001). Flexural strength increased in order of the specimens printed at orientation degrees of 90<45<0 with statistical significance. The 45-degree oriented specimens showed higher roughness and surface energy than those of other groups (P<.001). A higher proportion of C. albicans was found in the specimens printed at orientation degrees of 90<45<0 with statistical significance. CONCLUSIONS Printing orientation significantly influenced the printing accuracy, flexural strength, roughness, and response to C. albicans. Therefore, the printing orientation should be carefully decided to fabricate products with appropriate properties.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
3-D printing: The new industrial revolution
Berman, B. (2012) · Business Horizons · doi:10.1016/j.bushor.2011.11.003 · Cited by 2,481
Tymrak, B. M., Kreiger, M., & Pearce, J. M. (2014) · Materials & Design · doi:10.1016/j.matdes.2014.02.038 · Cited by 1,244
Laboratory of Biomechanics and Biomedical Engineering, D. O. M. E., Katsikogianni, M., & Missirlis, Y. (2004) · European Cells and Materials · doi:10.22203/ecm.v008a05 · Cited by 1,178
Concise review of mechanisms of bacterial adhesion to biomaterial surfaces
An, Y. H., & Friedman, R. J. (1998) · Journal of Biomedical Materials Research · doi:10.1002/(sici)1097-4636(199823)43:3<338::aid-jbm16>3.0.co;2-b · Cited by 1,146
The upcoming 3D-printing revolution in microfluidics
Bhattacharjee, N., Urrios, A., Kang, S., & Folch, A. (2016) · Lab on a Chip · doi:10.1039/c6lc00163g · Cited by 1,123
Quirynen, M., & Bollen, C. M. L. (1995) · Journal of Clinical Periodontology · doi:10.1111/j.1600-051x.1995.tb01765.x · Cited by 1,037
Digital dentistry: an overview of recent developments for CAD/CAM generated restorations
Beuer, F., Schweiger, J., & Edelhoff, D. (2008) · British Dental Journal · doi:10.1038/sj.bdj.2008.350 · Cited by 943
Alharbi, N. M., Osman, R. B., & Wismeijer, D. (2016) · Journal of Prosthetic Dentistry · doi:10.1016/j.prosdent.2015.12.002 · Cited by 473
Trends in Computer-Aided Manufacturing in Prosthodontics: A Review of the Available Streams
Abduo, J., Lyons, K., & Bennamoun, M. (2014) · International Journal of Dentistry · doi:10.1155/2014/783948 · Cited by 424
Bidra, A. S., Taylor, T. D., & Agar, J. R. (2013) · The Journal of Prosthetic Dentistry · doi:10.1016/s0022-3913(13)60318-2 · Cited by 418
Adherence of Candida albicans to denture-base materials with different surface finishes
Radford, D. R., Sweet, S. P., Challacombe, S. J., & Walter, J. D. (1998) · Journal of Dentistry · doi:10.1016/s0300-5712(97)00034-1 · Cited by 337
Material Property Testing of 3D-Printed Specimen in PLA on an Entry-Level 3D Printer
Letcher, T., & Waytashek, M. (2014) · Volume 2A: Advanced Manufacturing · doi:10.1115/imece2014-39379 · Cited by 325
3D-printing of transparent bio-microfluidic devices in PEG-DA
Urrios, A., Parra-Cabrera, C., Bhattacharjee, N., Gonzalez-Suarez, A. M., Rigat-Brugarolas, L. G., Nallapatti, U., Samitier, J., DeForest, C. A., Posas, F., Garcia-Cordero, J. L., et al. (2016) · Lab on a Chip · doi:10.1039/c6lc00153j · Cited by 274
Kattadiyil, M. T., Jekki, R., Goodacre, C. J., & Baba, N. Z. (2015) · The Journal of Prosthetic Dentistry · doi:10.1016/j.prosdent.2015.08.001 · Cited by 272
Bacterial adhesion to and viability on positively charged polymer surfaces
Terada, A., Yuasa, A., Kushimoto, T., Tsuneda, S., Katakai, A., & Tamada, M. (2006) · Microbiology · doi:10.1099/mic.0.28881-0 · Cited by 158
Effect of substrate surface hydrophobicity on the adherence of yeast and hyphalCandida
Yoshijima, Y., Murakami, K., Kayama, S., Liu, D., Hirota, K., Ichikawa, T., & Miyake, Y. (2009) · Mycoses · doi:10.1111/j.1439-0507.2009.01694.x · Cited by 112
Bidra, A. S., Farrell, K., Burnham, D. B., Dhingra, A., Taylor, T., & Kuo, C.-L. (2016) · The Journal of prosthetic dentistry (Print) · doi:10.1016/j.prosdent.2015.10.023 · Cited by 106
Pasmore, M. E., Todd, P. W., Pfiefer, B., Rhodes, M., & Bowman, C. N. (2002) · Biofouling · doi:10.1080/08927010290017743 · Cited by 82
A pre-therapeutic coating for medical devices that prevents the attachment of Candida albicans
Vargas-Blanco, D. A., Lynn, A., Rosch, J. C., Noreldin, R. M., Salerni, A. A., Lambert, C., & Rao, R. P. (2017) · Annals of Clinical Microbiology and Antimicrobials · doi:10.1186/s12941-017-0215-z · Cited by 44
Cited by
Additive manufacturing of structural materials
Liu, G., Zhang, X., Chen, X., He, Y., Cheng, L., Huo, M., Yin, J., Hao, F., Chen, S., Wang, P., et al. (2021) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2020.100596 · Cited by 707
Piedra-Cascón, W., Krishnamurthy, V. R., Att, W., & Revilla-León, M. (2021) · Journal of Dentistry · doi:10.1016/j.jdent.2021.103630 · Cited by 387
3D printing restorative materials using a stereolithographic technique: a systematic review
Della Bona, A., Cantelli, V., Britto, V. T., Collares, K. F., & Stansbury, J. W. (2021) · Dental Materials · doi:10.1016/j.dental.2020.11.030 · Cited by 334
Kim, D., Shim, J.-S., Lee, D., Shin, S.-H., Nam, N.-E., Park, K.-H., Shim, J.-S., & Kim, J.-E. (2020) · Polymers · doi:10.3390/polym12112762 · Cited by 253
Self-citationDimensional Accuracy in 3D Printed Medical Models: A Follow-Up Study on SLA and SLS Technology
Msallem, B., Vavrina, J. J., Beyer, M., Halbeisen, F. S., Lauer, G., Dragu, A., & Thieringer, F. M. (2024) · Journal of Clinical Medicine · doi:10.3390/jcm13195848 · Cited by 40
Metadata
- Authors
- Shim, J. S., Kim, J.-E., Jeong, S. H., Choi, Y. J., & Ryu, J. J.
- Venue
- The Journal of Prosthetic Dentistry
- Publisher
- Elsevier BV
- Published
- 2020-10
- Volume
- 124
- Issue
- 4
- Pages
- 468-475
- ISSN
- 0022-3913 (ISSN-L)
- OpenAlex
- W2991866212
- Cited by
- 418
- References
- 19
- FWCI
- 30.69
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.