The DOI matches its Crossref record; 36 of the 36 references it cites were found in a registry or an index.
A review of hazards associated with primary lithium and lithium-ion batteries
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“These devices exhibit long lifetimes for extended biosensor operation; however, they are relatively bulky and can pose toxicity issues, particularly lithium ion-based systems175,176.”
From Wearable biosensors for healthcare monitoring (2019) · cites this paper as [176]
Citations
Cites
Recent developments in cathode materials for lithium ion batteries
Fergus, J. W. (2009) · Journal of Power Sources · doi:10.1016/j.jpowsour.2009.08.089 · Cited by 1,602
Abuse behavior of high-power, lithium-ion cells
Spotnitz, R. M., & Franklin, J. (2002) · Journal of Power Sources · doi:10.1016/s0378-7753(02)00488-3 · Cited by 1,419
Safety mechanisms in lithium-ion batteries
Balakrishnan, P., Ramesh, R., & Kumar, T. (2006) · Journal of Power Sources · doi:10.1016/j.jpowsour.2005.12.002 · Cited by 1,084
An alternative cooling system to enhance the safety of Li-ion battery packs
Kizilel, R., Sabbah, R., Selman, J. R., & Al‐Hallaj, S. (2009) · Journal of Power Sources · doi:10.1016/j.jpowsour.2009.06.074 · Cited by 514
Viswanathan, V., Choi, D., Wang, D., Xu, W., Towne, S. A., Williford, R. E., Zhang, J., Liu, J., & Yang, Z. G. (2009) · Journal of Power Sources · doi:10.1016/j.jpowsour.2009.11.103 · Cited by 383
Overcharge reaction of lithium-ion batteries
Ohsaki, T., Kishi, T., Kuboki, T., Takami, N., Shimura, N., Sato, Y., Sekino, M., & Satoh, A. (2005) · Journal of Power Sources · doi:10.1016/j.jpowsour.2005.03.105 · Cited by 382
Differential scanning calorimetry material studies: implications for the safety of lithium-ion cells
Zhang, Z., Fouchard, D. T., & Rea, J. R. (1998) · Journal of Power Sources · doi:10.1016/s0378-7753(97)02611-6 · Cited by 330
Batteries for Electric and Hybrid-Electric Vehicles
Cairns, E. J., & Albertus, P. S. (2010) · Annual Review of Chemical and Biomolecular Engineering · doi:10.1146/annurev-chembioeng-073009-100942 · Cited by 265
Diagnostic examination of thermally abused high-power lithium-ion cells
Abraham, D., Roth, E., Kostecki, R., McCarthy, K., Maclaren, S., & Doughty, D. (2006) · Journal of Power Sources · doi:10.1016/j.jpowsour.2006.04.088 · Cited by 258
A New, Safe, High‐Rate and High‐Energy Polymer Lithium‐Ion Battery
Hassoun, J., Panero, S., Reale, P., & Scrosati, B. (2009) · Advanced Materials · doi:10.1002/adma.200900470 · Cited by 234
Flagged first, then by citations
Research works printed but not linked: 2
- Lim, 2007, Thermal reactivity of primary lithium coin-cell batteries, Sci. Technol. Energetic Mater., 68, 120
- UL Standard for Safety for Household and Commercial Batteries, UL 2054 First Edition, May 29, 1997.
Cited by
Sorted by citations
Wearable biosensors for healthcare monitoring
Kim, J., Campbell, A. S., de Ávila, B. E.-F., & Wang, J. (2019) · Nature Biotechnology · doi:10.1038/s41587-019-0045-y · Cited by 3,373
A review of lithium-ion battery safety concerns: The issues, strategies, and testing standards
Chen, Y., Kang, Y., Zhao, Y., Wang, L., Liu, J., Li, Y., Liang, Z., He, X., Li, X., Tavajohi, N., et al. (2021) · Journal of Energy Chemistry · doi:10.1016/j.jechem.2020.10.017 · Cited by 2,178
Environmental impacts, pollution sources and pathways of spent lithium-ion batteries
Mrozik, W., Rajaeifar, M. A., Heidrich, O., & Christensen, P. (2021) · Energy & Environmental Science · doi:10.1039/d1ee00691f · Cited by 1,028
Review of Hybrid Ion Capacitors: From Aqueous to Lithium to Sodium
Ding, J., Hu, W., Paek, E., & Mitlin, D. (2018) · Chemical Reviews · doi:10.1021/acs.chemrev.8b00116 · Cited by 976
Feng, X., Fang, M., He, X., Ouyang, M., Lu, L., Wang, H., & Zhang, M. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.01.005 · Cited by 923
Recycling of Spent Lithium-Ion Battery: A Critical Review
Zeng, X., Li, J., & Singh, N. P. (2013) · Critical Reviews in Environmental Science and Technology · doi:10.1080/10643389.2013.763578 · Cited by 956
Study of energy storage systems and environmental challenges of batteries
Dehghani-Sanij, A., Tharumalingam, E., Dusseault, M. B., & Fraser, R. (2019) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2019.01.023 · Cited by 931
Safety focused modeling of lithium-ion batteries: A review
Abada, S., Marlair, G., Lecocq, A., Petit, M., Sauvant-Moynot, V., & Huet, F. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2015.11.100 · Cited by 822
Wearable Chemical Sensors: Present Challenges and Future Prospects
Bandodkar, A. J., Jeerapan, I., & Wang, J. (2016) · ACS Sensors · doi:10.1021/acssensors.6b00250 · Cited by 778
Supercapacitor and supercapattery as emerging electrochemical energy stores
Chen, G. Z. (2016) · International Materials Reviews · doi:10.1080/09506608.2016.1240914 · Cited by 763
“Problems with organic electrolyte based Li-ion batteries are often reported [92,93], and the same or similar situations are expected for supercapacitors with organic electrolytes.”
BackgroundRezvanizaniani, S. M., Liu, Z., Chen, Y., & Lee, J. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.01.085 · Cited by 714
Electrolyte Lifetime in Aqueous Organic Redox Flow Batteries: A Critical Review
Kwabi, D. G., Ji, Y., & Aziz, M. J. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00599 · Cited by 614
Recycling and environmental issues of lithium-ion batteries: Advances, challenges and opportunities
Costa, C. M., Barbosa, J. C., Gonçalves, R., de Castro, H. S. C., del Campo, F. J., & Lanceros-Méndez, S. (2021) · Energy storage materials · doi:10.1016/j.ensm.2021.02.032 · Cited by 640
A review on the growing concern and potential management strategies of waste lithium-ion batteries
Winslow, K. M., Laux, S. J., & Townsend, T. G. (2017) · Resources Conservation and Recycling · doi:10.1016/j.resconrec.2017.11.001 · Cited by 582
Deng, Y., Feng, C., Jiaqiang, E., Zhu, H., Chen, J., Wen, M., & Yin, H. (2018) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2018.06.043 · Cited by 548
Lithium‐Ion Battery Separators for Ionic‐Liquid Electrolytes: A Review
Francis, C., Kyratzis, I. L., & Best, A. S. (2020) · Advanced Materials · doi:10.1002/adma.201904205 · Cited by 538
Ruiz, V., Pfrang, A., Kriston, Á., Omar, N., den Bossche, P. V., & Boon-Brett, L. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.05.195 · Cited by 539
Investigation on the fire-induced hazards of Li-ion battery cells by fire calorimetry
Ribière, P., Grugeon, S., Morcrette, M., Boyanov, S., Laruelle, S., & Marlair, G. (2011) · Energy & Environmental Science · doi:10.1039/c1ee02218k · Cited by 531
Samson, A. J., Hofstetter, K., Bag, S., & Thangadurai, V. (2019) · Energy & Environmental Science · doi:10.1039/c9ee01548e · Cited by 514
A review of phase change materials for vehicle component thermal buffering
Jankowski, N. R., & McCluskey, F. P. (2013) · Applied Energy · doi:10.1016/j.apenergy.2013.08.026 · Cited by 483
“Non-uniform heating can occur during rapid discharge creating highly variable pack temperature distributions, and under certain conditions localized temperature excursions can lead to thermal runaway in lithium-based battery packs [65,66].”
BackgroundCui, Y.-H., Zhao, Q., Wu, X., Chen, X., Yang, J., Wang, Y., Qin, R., Ding, S., Song, Y., Wu, J., et al. (2020) · Angewandte Chemie International Edition · doi:10.1002/anie.202005472 · Cited by 446
Research progress on power battery cooling technology for electric vehicles
Lu, M., Zhang, X., Ji, J., Xu, X., & Zhang, Y. (2019) · Journal of Energy Storage · doi:10.1016/j.est.2019.101155 · Cited by 450
A review on various temperature-indication methods for Li-ion batteries
Raijmakers, L. H. J., Danilov, D. L., Eichel, R., & Notten, P. H. L. (2019) · Applied Energy · doi:10.1016/j.apenergy.2019.02.078 · Cited by 439
Lithium-ion batteries and the future of sustainable energy: A comprehensive review
Ngoy, K. R., Lukong, V. T., Yoro, K. O., Beya, M. J., Chukwuati, C. N., Ibegbulam, C., Eterigho-Ikelegbe, O., Ukoba, K. O., & Jen, T. (2025) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2025.115971 · Cited by 472
Dai, H., Jiang, B., Hu, X., Lin, X., Wei, X., & PECHT, M. G. (2020) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2020.110480 · Cited by 408
Review of Lithium Production and Recovery from Minerals, Brines, and Lithium-Ion Batteries
Meng, F., McNeice, J., Zadeh, S. S., & Ghahreman, A. (2019) · Mineral Processing and Extractive Metallurgy Review · doi:10.1080/08827508.2019.1668387 · Cited by 422
Toward Green Battery Cells: Perspective on Materials and Technologies
Dühnen, S., Betz, J., Kolek, M., Schmuch, R., Winter, M., & Placke, T. (2020) · Small Methods · doi:10.1002/smtd.202000039 · Cited by 408
Aguesse, F., Manalastas, W. W., Buannic, L., del Amo, J. M. L., Singh, G., Llordés, A., & Kilner, J. A. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b13925 · Cited by 386
Mitigation strategies for Li-ion battery thermal runaway: A review
Xu, B. S., Lee, J., Kwon, D., Kong, L., & PECHT, M. G. (2021) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2021.111437 · Cited by 395
Solving spent lithium-ion battery problems in China: Opportunities and challenges
Zeng, X., Li, J., & Liu, L. (2015) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2015.08.014 · Cited by 379
Martins, L. S., Guimarães, L. F., Botelho Junior, A. B., Tenório, J. A. S., & Espinosa, D. C. R. (2021) · Journal of Environmental Management · doi:10.1016/j.jenvman.2021.113091 · Cited by 361
Industrial Recycling of Lithium-Ion Batteries—A Critical Review of Metallurgical Process Routes
Brückner, L., Frank, J., & Elwert, T. (2020) · Metals · doi:10.3390/met10081107 · Cited by 336
“However, LIB recycling is a challenging task due to their complex material composition and their electrical and chemical energy content leading to various health, safety, and environmental (HSE) risks [9].”
BackgroundAbuse by External Heating, Overcharge and Short Circuiting of Commercial Lithium-Ion Battery Cells
Larsson, F., & Mellander, B. ‐. (2014) · Journal of The Electrochemical Society · doi:10.1149/2.0311410jes · Cited by 321
Characteristics of lithium-ion batteries during fire tests
Larsson, F., Andersson, P., Blomqvist, P., Lorén, A., & Mellander, B. ‐. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.08.027 · Cited by 319
Thermal runaway mechanism of lithium-ion battery with LiNi0.8Mn0.1Co0.1O2 cathode materials
Li, Y., Liu, X., Wang, L., Feng, X., Ren, D., Wu, Y., Xu, G., Lu, L., Hou, J., Zhang, W., et al. (2021) · Nano Energy · doi:10.1016/j.nanoen.2021.105878 · Cited by 319
Arora, S. (2018) · Journal of Power Sources · doi:10.1016/j.jpowsour.2018.08.020 · Cited by 321
Prevent thermal runaway of lithium-ion batteries with minichannel cooling
Xu, J. J., Lan, C., Qiao, Y., & Ma, Y. (2016) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2016.08.151 · Cited by 312
“When the temperature of a lithium-ion battery is elevated and the heat can’t be dissipated effectively, thermal runaway due to the exothermic reactions can occur [2,25,26].”
BackgroundGu, F., Guo, J., Yao, X. J., Summers, P. A., Widijatmoko, S. D., & Hall, P. (2017) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2017.05.181 · Cited by 308
Zhang, G., Wei, X., Tang, X., Zhu, J., Chen, S., & Dai, H. (2021) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2021.110790 · Cited by 318
A Review on the Thermal Hazards of the Lithium-Ion Battery and the Corresponding Countermeasures
Ouyang, D., Chen, M.-Y., Huang, Q., Weng, J., Wang, Z., & Wang, J. (2019) · Applied Sciences · doi:10.3390/app9122483 · Cited by 268
Zhamu, A., Chen, G., Liu, C., Neff, D., Fang, Q., Yu, Z., Xiong, W., Wang, Y., Wang, X., & Jang, B. Z. (2011) · Energy & Environmental Science · doi:10.1039/c2ee02911a · Cited by 301
Toxicity, a serious concern of thermal runaway from commercial Li-ion battery
Sun, J., Li, J., Zhou, T., Yang, K., Wei, S., Tang, N., Dang, N., Li, H., Qiu, X., & Chen, L. (2016) · Nano Energy · doi:10.1016/j.nanoen.2016.06.031 · Cited by 297
Lee, H., Hong, S., Lee, J., Suh, Y. D., Kwon, J., Moon, H., Kim, H., Yeo, J., & Ko, S. H. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b04364 · Cited by 294
Thermal Runaway Triggered by Plated Lithium on the Anode after Fast Charging
Li, Y., Feng, X., Ren, D., Ouyang, M., Lu, L., & Han, X. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b16589 · Cited by 282
Profatilova, I. A., Stöck, C., Schmitz, A., Passerini, S., & Winter, M. (2012) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.08.066 · Cited by 273
Lobato-Peralta, D. R., Okoye, P. U., & Alegre, C. (2024) · Journal of Power Sources · doi:10.1016/j.jpowsour.2024.235140 · Cited by 293
Mohammadian, S. K., & Zhang, Y. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.09.110 · Cited by 269
Strategies to Solve Lithium Battery Thermal Runaway: From Mechanism to Modification
Kong, L., Li, Y., & Feng, W. (2021) · Electrochemical Energy Reviews · doi:10.1007/s41918-021-00109-3 · Cited by 266
“An appropriate thermal management system can extend the battery life, allowing the battery to achieve improved autonomous performance [75].”
BackgroundFully Biodegradable Microsupercapacitor for Power Storage in Transient Electronics
Lee, G., Kang, S., Won, S. M., Gutruf, P., Jeong, Y. R., Koo, J., Lee, S., Rogers, J. A., & Ha, J. S. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201700157 · Cited by 271
Huang, P., Ping, P., Li, K., Chen, H., Wang, Q., Wen, J. X., & Sun, J. (2016) · Applied Energy · doi:10.1016/j.apenergy.2016.08.160 · Cited by 252
“Despite the promising potential for a wide range of energy applications, LIBs also have some inherent safety issues which need to be addressed from design stage to reduce the propensity to thermal runaway induced fire and explosion accidents in storage, transportation and utilization [3,4,7,8].”
BackgroundLithium‐based batteries, history, current status, challenges, and future perspectives
Wulandari, T., Fawcett, D., Majumder, S. B., & Poinern, G. E. J. (2023) · Battery energy · doi:10.1002/bte2.20230030 · Cited by 263
Dual-ion batteries: The emerging alternative rechargeable batteries
Sui, Y., Liu, C., Masse, R. C., Neale, Z. G., Atif, M. M., Alsalhi, M. S., & Cao, G. (2019) · Energy storage materials · doi:10.1016/j.ensm.2019.11.003 · Cited by 246
Abada, S., Petit, M., Lecocq, A., Marlair, G., Sauvant-Moynot, V., & Huet, F. (2018) · Journal of Power Sources · doi:10.1016/j.jpowsour.2018.07.094 · Cited by 245
Buannic, L., Orayech, B., del Amo, J. M. L., Carrasco, J., Katcho, N. A., Aguesse, F., Manalastas, W. W., Zhang, W., Kilner, J. A., & Llordés, A. (2017) · Chemistry of Materials · doi:10.1021/acs.chemmater.6b05369 · Cited by 240
Opportunities to Improve Recycling of Automotive Lithium Ion Batteries
Sonoc, A., Jeswiet, J., & Soo, V. K. (2015) · Procedia CIRP · doi:10.1016/j.procir.2015.02.039 · Cited by 233
A review of battery thermal management systems using liquid cooling and PCM
Zhao, Y., Zhang, X., Yang, B., & Cai, S. (2023) · Journal of Energy Storage · doi:10.1016/j.est.2023.109836 · Cited by 233
A review of novel thermal management systems for batteries
Al‐Zareer, M., Dinçer, İ., & Rosen, M. A. (2018) · International Journal of Energy Research · doi:10.1002/er.4095 · Cited by 227
“Thermal runaway occurs when the temperature of the lithium ion batteries rises above the allowable operating conditions, which occurs when the cooling system is unable to effectively remove the generated heat.(6,64,65) Xu et al(66) proposed a mini channel liquid‐ based cooling system that is designed on a battery modu…”
BackgroundA review of physical processes used in the safe recycling of lithium ion batteries
Sommerville, R. P. Z., Shaw-Stewart, J., Goodship, V., Rowson, N. A., & Kendrick, E. (2020) · Sustainable materials and technologies · doi:10.1016/j.susmat.2020.e00197 · Cited by 249
Pyrolysis and physical separation for the recovery of spent LiFePO4 batteries
Zhong, X., Liu, W., Han, J., Jiao, F., Qin, W., Liu, T., & Zhao, C. (2019) · Waste Management · doi:10.1016/j.wasman.2019.03.068 · Cited by 223
Jilte, R. D., Kumar, R., & Ahmadi, M. H. (2019) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.118131 · Cited by 220
Risk management over the life cycle of lithium-ion batteries in electric vehicles
Christensen, P. A., Anderson, P. A., Harper, G. D. J., Lambert, S., Mrozik, W., Rajaeifar, M. A., Wise, M. S., & Heidrich, O. (2021) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2021.111240 · Cited by 220
Zheng, S., Wang, L., Feng, X., & He, X. (2018) · Journal of Power Sources · doi:10.1016/j.jpowsour.2017.12.050 · Cited by 219
Xiong, R., Ma, S., Li, H., Sun, F., & Li, J. (2020) · iScience · doi:10.1016/j.isci.2020.101010 · Cited by 219
“, 2012a), leading to fire and even explosions (Lisbona and Snee, 2011; Meng and Li, 2019).”
BackgroundDiaz, L. B., He, X., Hu, Z., Restuccia, F., Marinescu, M., Barreras, J. V., Patel, Y., Offer, G. J., & Rein, G. (2020) · Journal of The Electrochemical Society · doi:10.1149/1945-7111/aba8b9 · Cited by 219
Chen, X., Xu, B., Zhou, T., Liu, D., Hu, H., & Fan, S. (2015) · Separation and Purification Technology · doi:10.1016/j.seppur.2015.02.006 · Cited by 229
Li-ion battery recycling challenges
Ma, X., Azhari, L., & Wang, Y. (2021) · Chem · doi:10.1016/j.chempr.2021.09.013 · Cited by 214
Gas Sensing Technology for the Detection and Early Warning of Battery Thermal Runaway: A Review
Wang, Z., Zhu, L., Liu, J., Wang, J., & Yan, W. (2022) · Energy & Fuels · doi:10.1021/acs.energyfuels.2c01121 · Cited by 211
Ojanen, S., Lundström, M., Santasalo-Aarnio, A., & Serna-Guerrero, R. (2018) · Waste Management · doi:10.1016/j.wasman.2018.03.045 · Cited by 217
Characterization of large format lithium ion battery exposed to extremely high temperature
Feng, X., Sun, J., Ouyang, M., He, X., Lu, L., Han, X., Fang, M., & Peng, H. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.08.094 · Cited by 201
A Review of Lithium-Ion Battery Fire Suppression
Ghiji, M., Novozhilov, V. B., Moinuddin, K., Joseph, P. F., Burch, I., Suendermann, B., & Gamble, G. (2020) · Energies · doi:10.3390/en13195117 · Cited by 200
Zeng, X., & Li, J. (2014) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2014.02.001 · Cited by 200
A review of marine renewable energy storage
Wang, Z., Carriveau, R., Ting, D. S. ‐., Xiong, W., & Wang, Z. (2019) · International Journal of Energy Research · doi:10.1002/er.4444 · Cited by 196
Becking, J., Groebmeyer, A., Kolek, M., Rodehorst, U. C., Schulze, S., Winter, M., Bieker, P. M., & Stan, M. C. (2017) · Advanced Materials Interfaces · doi:10.1002/admi.201700166 · Cited by 194
Duh, Y., Sun, Y., Lin, X., Zheng, J., Wang, M., Wang, Y., Lin, X., Jiang, X., Zheng, Z., Zheng, S., et al. (2021) · Journal of Energy Storage · doi:10.1016/j.est.2021.102888 · Cited by 192
Enabling aqueous binders for lithium battery cathodes – Carbon coating of aluminum current collector
Doberdò, I., Loeffler, N., Laszczynski, N., Cericola, D., Penazzi, N., Bodoardo, S., Kim, G., & Passerini, S. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.10.039 · Cited by 189
Thermal behaviour of the lithiated-graphite/electrolyte interface through GC/MS analysis
Gachot, G., Grugeon, S., Eshetu, G. G., Mathiron, D., Ribière, P., Armand, M. B., & Laruelle, S. (2012) · Electrochimica Acta · doi:10.1016/j.electacta.2012.08.016 · Cited by 184
Olabi, A. G., Wilberforce, T., Sayed, E. T., Abo-Khalil, A. G., Maghrabie, H. M., Elsaid, K., & Abdelkareem, M. A. (2022) · Energy · doi:10.1016/j.energy.2022.123987 · Cited by 189
Eshetu, G. G., Grugeon, S., Gachot, G., Mathiron, D., Armand, M., & Laruelle, S. (2013) · Electrochimica Acta · doi:10.1016/j.electacta.2013.03.171 · Cited by 154
Hua, Y., Sun, Y., Yan, F., Wang, S., Xu, Z., Zhao, B., & Zhang, Z. (2021) · Chemical Engineering Journal · doi:10.1016/j.cej.2021.133200 · Cited by 171
A Brief Review on Multivalent Intercalation Batteries with Aqueous Electrolytes
Guduru, R. K., & Icaza, J. C. (2016) · Nanomaterials · doi:10.3390/nano6030041 · Cited by 166
“There are many accidents reported in the recent past related to these phenomena [45–47].”
BackgroundProgress, Key Issues, and Future Prospects for Li‐Ion Battery Recycling
Wu, X., Ma, J., Wang, J., Zhang, X., Zhou, G., & Liang, Z. (2022) · Global Challenges · doi:10.1002/gch2.202200067 · Cited by 165
Yao, L., Yao, H., Xi, G., & Feng, Y. P. (2016) · RSC Advances · doi:10.1039/c5ra25079j · Cited by 158
All-temperature area battery application mechanism, performance, and strategies
Chen, S., Wei, X., Zhang, G., Wang, X., Zhu, J., Feng, X., Dai, H., & Ouyang, M. (2023) · The Innovation · doi:10.1016/j.xinn.2023.100465 · Cited by 162
Thermal analysis of near-isothermal compressed gas energy storage system
Odukomaiya, A., Abu-Heiba, A., Gluesenkamp, K. R., Abdelaziz, O. A., Jackson, R. K., Daniel, C., Graham, S. L., & Momen, A. M. (2016) · Applied Energy · doi:10.1016/j.apenergy.2016.07.059 · Cited by 157
“Furthermore, Li-ion battery chemistries have been associated with a higher risk of fire/explosion incidents [32].”
BackgroundPursuing safer batteries: Thermal abuse of LiFePO4 cells
Bugryniec, P. J., Davidson, J. N., Cumming, D. J., & Brown, S. (2019) · Journal of Power Sources · doi:10.1016/j.jpowsour.2019.01.013 · Cited by 156
“However, when abused, Li-ion cells can suffer from thermal runaway (TR) which can lead to fire and explosion of a cell (Wang et al., 2012; Lisbona and Snee, 2011; Ohsaki et al., 2005).”
BackgroundMohammadian, S. K., Rassoulinejad-Mousavi, S. M., & Zhang, Y. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2015.07.056 · Cited by 155
Experimental and theoretical analysis of a method to predict thermal runaway in Li-ion cells
Shah, K., Chalise, D., & Jain, A. (2016) · Journal of Power Sources · doi:10.1016/j.jpowsour.2016.08.133 · Cited by 155
Cause and Mitigation of Lithium-Ion Battery Failure—A Review
Kaliaperumal, M., Dharanendrakumar, M. S., Prasanna, S., Abhishek, K. V., Chidambaram, R. K., Adams, S. N., Zaghib, K., & Reddy, M. V. (2021) · Materials · doi:10.3390/ma14195676 · Cited by 155
Mohammadian, S. K., He, Y., & Zhang, Y. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2015.05.055 · Cited by 154
Chen, M., Ouyang, D., Liu, J., & Wang, J. (2019) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2019.113750 · Cited by 152
Zhao, Y., Liu, B., Zhang, L., & Guo, S. (2020) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2020.122740 · Cited by 152
A method for state-of-charge estimation of LiFePO4 batteries based on a dual-circuit state observer
Tang, X., Wang, Y., & Chen, Z. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2015.07.028 · Cited by 151
Explosion characteristics for Li-ion battery electrolytes at elevated temperatures
Henriksen, M., Vaagsaether, K., Lundberg, J., Forseth, S., & Bjerketvedt, D. K. (2019) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2019.02.108 · Cited by 148
Lithium-ion battery fundamentals and exploration of cathode materials: A review
Koech, A. K., Mwandila, G., Mulolani, F., & Mwaanga, P. (2024) · South African Journal of Chemical Engineering · doi:10.1016/j.sajce.2024.09.008 · Cited by 190
Smart batteries for powering the future
Meng, Q., Huang, Y., Li, L., Wu, F., & Chen, R. (2024) · Joule · doi:10.1016/j.joule.2024.01.011 · Cited by 143
Lebedeva, N., & Boon-Brett, L. (2016) · Journal of The Electrochemical Society · doi:10.1149/2.0171606jes · Cited by 127
Walker, W. Q., Darst, J. J., Finegan, D. P., Bayles, G. A., Johnson, K. L., Darcy, E. C., & Rickman, S. L. (2019) · Journal of Power Sources · doi:10.1016/j.jpowsour.2018.10.099 · Cited by 141
Safety challenges and safety measures of Li‐ion batteries
Chen, S.-Y., Gao, Z.-H., & Sun, T. (2021) · Energy Science & Engineering · doi:10.1002/ese3.895 · Cited by 122
Chen, M., Ouyang, D., Weng, J., Liu, J., & Wang, J. (2019) · Process Safety and Environmental Protection · doi:10.1016/j.psep.2019.08.023 · Cited by 139
Metal–organic framework based electrode materials for lithium-ion batteries: a review
Mehek, R., Iqbal, N., Nооr, T., Amjad, M. Z. B., Ali, G., Vignarooban, K., & Khan, M. (2021) · RSC Advances · doi:10.1039/d1ra05073g · Cited by 139
Metadata
- Authors
- Lisbona, D., & Snee, T.
- Affiliations
- HSE Science and Research Centre (GB)
- Corresponding author
- Lisbona, Diego
- Venue
- Process Safety and Environmental Protection
- Publisher
- Elsevier BV
- Published
- 2011-11
- Volume
- 89
- Issue
- 6
- Pages
- 434-442
- ISSN
- 0263-8762 (ISSN-L)
- 0957-5820
- OpenAlex
- W1974775292
- Cited by
- 701
- References
- 36
- Citations by year
- 2026: 44 · 2025: 58 · 2024: 67 · 2023: 75 · 2022: 73 · 2021: 73 · 2020: 67 · 2019: 49 · 2018: 42 · 2017: 32 · 2016: 40 · 2015: 25 · 2014: 33 · 2013: 12 · 2012: 8
- FWCI
- 34.96
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Process Safety and Environmental Protection (publishedVersion)
- Topics
- Physical Sciences › Engineering › Automotive Engineering › Battery Modeling and Management
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Advancements in Battery Materials
- Physical Sciences › Engineering › Safety, Risk, Reliability and Quality › Risk and Safety Analysis
- Keywords
- lithium primary batteries, lithium-ion batteries, battery safety, thermal runaway, flammable solvents, battery fires, battery safety testing, battery energy storage, battery recycling, battery waste, battery life cycle, accident prevention
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review