The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Thermal pyrolysis of high density polyethylene (HDPE) in a novel fixed bed reactor system for the production of high value gasoline range hydrocarbons (HC)
Abstract
Abstract Pyrolysis is a promising thermolysis technique to recover valuable oils and light hydrocarbons (HC) with high yields from plastic solid waste (PSW). In this work, thermal pyrolysis of high density polyethylene (HDPE) with the aim of producing gasoline range hydrocarbon oils, has been carried out in a novel fixed bed (batch) reactor. The pyrolysis of HDPE has been conducted between 500 to 800 °C in the presence of nitrogen as an inert carrier gas media to produce liquid fuel oil, gaseous products and solid char. The optimum temperature of obtaining maximum oil product yield (70%) was 550° C. A comprehensive gas chromatography (GC) analysis of the liquid and gaseous products was conducted to quantify high molecular weight individual HC components. Moreover, light molecular weight HC constituting the gaseous fraction were identified. A chemical kinetic analysis of the cracking reactions, was performed to investigate the reaction mechanism of yielding the maximum oil product. The oil product recovered had a high proportion of aliphatic HC especially in the range of C8 to C12, whilst aromatic HC were of lower proportion. The carbon number of the pyrolysis oil was noted to increase proportionally with the increasing operating temperature. The gaseous product had a high percentage (> 70%) of C2 to C4 HC, which was attributed to the high activity of carbon/carbon (C-C) chain scission reaction.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Lopez, G., Artetxe, M., Amutio, M., Bilbao, J., & Olazar, M. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.01.142 · Cited by 897
Cited by
Current technologies for plastic waste treatment: A review
Zhang, F., Zhao, Y., Wang, D., Yan, M., Zhang, J., Zhang, P., Ding, T., Chen, L., & Chen, C. (2021) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2020.124523 · Cited by 532
Progress and perspective for conversion of plastic wastes into valuable chemicals
Zheng, K., Wu, Y., Hu, Z., Wang, S., Jiao, X., Zhu, J., Sun, Y., & Xie, Y. (2023) · Chemical Society Reviews · doi:10.1039/d2cs00688j · Cited by 395
From plastic waste to wealth using chemical recycling: A review
Jiang, J., Shi, K., Zhang, X., Yu, K., Zhang, H., He, J., Ju, Y., & Liu, J. (2022) · Journal of Environmental Chemical Engineering · doi:10.1016/j.jece.2021.106867 · Cited by 300
Harussani, M. M., Sapuan, S. M., Rashid, U., Khalina, A., & Ilyas, R. A. (2022) · Science of The Total Environment · doi:10.1016/j.scitotenv.2021.149911 · Cited by 255
Pyrolysis for plastic waste management: An engineering perspective
Xayachak, T., Haque, N., Parthasarathy, R., King, S., Emami, N., Lau, D., & Pramanik, B. K. (2022) · Journal of Environmental Chemical Engineering · doi:10.1016/j.jece.2022.108865 · Cited by 127
Metadata
- Authors
- Al-Salem, S. M.
- Venue
- Process Safety and Environmental Protection
- Publisher
- Elsevier BV
- Published
- 2019-07
- Volume
- 127
- Pages
- 171-179
- ISSN
- 0263-8762 (ISSN-L)
- 0957-5820
- OpenAlex
- W2944134279
- Cited by
- 169
- References
- 1
- FWCI
- 5.47
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.