CoChat
Sign Up
Cited by 127

The DOI matches its Crossref record; 6 of the 6 references it cites were found in a registry or an index.

Pyrolysis for plastic waste management: An engineering perspective

Xayachak, Tu, Haque, Nawshad, Parthasarathy, Raj, King, Sarah, Emami, Nargessadat, Lau, Deborah, Pramanik, Biplob Kumar·2022·Journal of Environmental Chemical Engineering
DOI 10.1016/j.jece.2022.108865
Open this paper in CoChat — free account

Overview

Integrity signals

Registry

Crossref · 10.1016/j.jece.2022.108865

Cites

6 of 6 references verified0 citation errors · 0 not checkable

Statistics

Recomputing p-values needs the paper’s full text.

Verification

Claims the paper makes

We couldn’t retrieve this paper’s full text, so its claims and self-check weren’t run. The registry and citation checks still apply.

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Citations

Cites

Flagged first, then by citations

Research works printed but not linked: 126

  1. Davidson, 2021, Developments in the life cycle assessment of chemical recycling of plastic waste, J. Clean. Prod., 293, 10.1016/j.jclepro.2021.126163 · DOI
  2. Gopinath, 2020, A critical review on the influence of energy, environmental and economic factors on various processes used to handle and recycle plastic wastes: development of a comprehensive index, J. Clean. Prod., 274, 10.1016/j.jclepro.2020.123031 · DOI
  3. Jiang, 2022, From plastic waste to wealth using chemical recycling: a review, J. Environ. Chem. Eng., 10, 10.1016/j.jece.2021.106867 · DOI
  4. Solis, 2020, Technologies for chemical recycling of household plastics – a technical review and TRL assessment, Waste Manag., 105, 128, 10.1016/j.wasman.2020.01.038 · DOI · Paper page
  5. King, 2022, A circular economy framework for plastics: a semi-systematic review, J. Clean. Prod., 364, 10.1016/j.jclepro.2022.132503 · DOI
  6. Al-Salem, 2017, A review on thermal and catalytic pyrolysis of plastic solid waste (PSW), J. Environ. Manag., 197, 177, 10.1016/j.jenvman.2017.03.084 · DOI
  7. Huang, 2022, Chemical recycling of plastic waste for sustainable material management: a prospective review on catalysts and processes, Renew. Sustain. Energy Rev., 154, 10.1016/j.rser.2021.111866 · DOI
  8. Arshad, 2017, Microwave assisted pyrolysis of plastic waste for production of fuels: a review, MATEC Web Conf., 131, 02005, 10.1051/matecconf/201713102005 · DOI
  9. Jahirul, 2022, Transport fuel from waste plastics pyrolysis – a review on technologies, challenges and opportunities, Energy Convers. Manag., 258, 10.1016/j.enconman.2022.115451 · DOI
  10. Sharuddin, 2016, A review on pyrolysis of plastic wastes, Energy Convers. Manag., 115, 308, 10.1016/j.enconman.2016.02.037 · DOI · Paper page
  11. H. Zheng, T. Yu, C. Qu, W. Li and Y. Wang, “Basic Characteristics and Application Progress of Supercritical Water,” IOP Conf. Series: Earth and Environmental Science, 555, 120 - 136, 2020. · DOI
  12. Panda, 2010, Thermolysis of waste plastics to liquid fuel. A suitable method for plastic waste management and manufacture of value added products-a world prospective, Renew. Sustain. Energy Rev., 14, 233, 10.1016/j.rser.2009.07.005 · DOI
  13. Rodríguez-Luna, 2021, Two-step pyrolysis for waste HDPE valorization, Process Saf. Environ. Prot., 149, 526, 10.1016/j.psep.2020.11.038 · DOI
  14. Parku, 2020, Pyrolysis of waste polypropylene plastics for energy recovery: Influence of heating rate and vacuum conditions on composition of fuel product, Fuel Process. Technol., 209, 10.1016/j.fuproc.2020.106522 · DOI
  15. Zhou, 2015, Interactions of three municipal solid waste components during co-pyrolysis, J. Anal. Appl. Pyrolysis, 111, 265, 10.1016/j.jaap.2014.08.017 · DOI
  16. Yuan, 2014, High efficiency chlorine removal from polyvinyl chloride (PVC) pyrolysis with a gas–liquid fluidized bed reactor, Waste Manag., 34, 1045, 10.1016/j.wasman.2013.08.021 · DOI
  17. Castro, 2012, Kinetics of thermal de-chlorination of PVC under pyrolytic conditions, Waste Manag., 32, 847, 10.1016/j.wasman.2012.01.004 · DOI
  18. Miskolczi, 2009, Pyrolysis of polyvinyl chloride (PVC)-containing mixed plastic wastes for recovery of hydrocarbons, Energy Fuels, 23, 2743, 10.1021/ef8011245 · DOI
  19. López, 2011, Dechlorination of fuels in pyrolysis of PVC containing plastic wastes, Fuel Process. Technol., 92, 253, 10.1016/j.fuproc.2010.05.008 · DOI
  20. Hubacek, 2022, Dechlorination during pyrolysis of plastics: The potential of stepwise pyrolysis in combination with metal sorbents, Fuel Process. Technol., 231, 10.1016/j.fuproc.2022.107226 · DOI
  21. Ma, 2021, Dechlorination of polyvinyl chloride by hydrothermal treatment with cupric ion, Process Saf. Environ. Prot., 146, 108, 10.1016/j.psep.2020.08.040 · DOI
  22. Lei, 2018, Investigation on thermal dechlorination and catalytic pyrolysis in a continuous process for liquid fuel recovery from mixed plastic wastes, J. Mater. Cycles Waste Manag., 20, 137, 10.1007/s10163-016-0555-3 · DOI
  23. Torres, 2021, Chlorine removal from the pyrolysis of urban polyolefinic waste in a semi-batch reactor, J. Environ. Chem. Eng., 9, 10.1016/j.jece.2020.104920 · DOI
  24. Yuan, 2020, Synergistic effect and chlorine-release behaviors during Co-pyrolysis of LLDPE, PP, and PVC, ACS Publ., 5, 11291
  25. Kusenberg, 2022, Opportunities and challenges for the application of post-consumer plastic waste pyrolysis oils as steam cracker feedstocks: to decontaminate or not to decontaminate?, Waste Manag., 138, 83, 10.1016/j.wasman.2021.11.009 · DOI
  26. Jaafar, 2022, Pyrolysis of common plastics and their mixtures to produce valuable petroleum-like products, Polym. Degrad. Stab., 195, 10.1016/j.polymdegradstab.2021.109770 · DOI
  27. Zhou, 2016, Formation of styrene monomer, dimer and trimer in the primary volatiles produced from polystyrene pyrolysis in a wire-mesh reactor, Fuel, 182, 333, 10.1016/j.fuel.2016.05.123 · DOI
  28. Demirbas, 2004, Pyrolysis of municipal plastic wastes for recovery of gasoline-range hydrocarbons, J. Anal. Appl. Pyrolysis, 72, 97, 10.1016/j.jaap.2004.03.001 · DOI
  29. Liu, 2000, Pyrolysis of polystyrene waste in a fluidized-bed reactor to obtain styrene monomer and gasoline fraction, Fuel Process. Technol., 63, 45, 10.1016/S0378-3820(99)00066-1 · DOI
  30. Park, 2020, Two-stage pyrolysis of polystyrene: Pyrolysis oil as a source of fuels or benzene, toluene, ethylbenzene, and xylenes, Appl. Energy, 259, 10.1016/j.apenergy.2019.114240 · DOI
  31. Sogancioglu, 2017, A comparative study on waste plastics pyrolysis liquid products quantity and energy recovery potential, Energy Procedia, 118, 221, 10.1016/j.egypro.2017.07.020 · DOI
  32. Tuly, 2019, Liquid fuel production by pyrolysis of polythene and PET plastic, AIP Conf. Proc., 2121, 10.1063/1.5115938 · DOI
  33. Miandad, 2017, Effect of plastic waste types on pyrolysis liquid oil, Int. Biodeterior. Biodegrad., 119, 239, 10.1016/j.ibiod.2016.09.017 · DOI
  34. Abnisa, 2019, The yield prediction of synthetic fuel production from pyrolysis of plastic waste by levenberg–marquardt approach in feedforward neural networks model, Polymers, 11
  35. Rodríguez-Liebana, 2022, Morpho-structural and thermo-mechanical characterization of recycled polypropylene and polystyrene from mixed post-consumer plastic waste, J. Environ. Chem. Eng., 10, 10.1016/j.jece.2022.108332 · DOI
  36. Das and Tiwari, “The effect of slow pyrolysis on the conversion of packaging waste plastics (PE and PP) into fuel,” Waste Management, 79, 615–624, 2018. · DOI
  37. Yan, 2015, Thermal cracking of virgin and waste plastics of PP and LDPE in a semibatch reactor under atmospheric pressure, Energy Fuels, 29, 2289, 10.1021/ef502919f · DOI
  38. Duque, 2020, The influence of the recycling stress history on LDPE waste pyrolysis, Polym. Test., 86, 10.1016/j.polymertesting.2020.106460 · DOI
  39. Tai, 2018, Evaluation and verification of the virgin–recycled mixing ratio of polypropylene plastic, J. Chin. Inst. Eng., no. 1, 69, 10.1080/02533839.2017.1419074 · DOI
  40. M. Martynis, Mulyazmi, E. Winanda and A. Harahap, “Thermal Pyrolysis of Polypropylene Plastic Waste into Liquid Fuel: Reactor Performance Evaluation,” IOP Conference Series: Material Science and Engineering, 543, 012047, 2019. · DOI
  41. Al-Salem, 2019, Thermal pyrolysis of high density polyethylene (HDPE) in a novel fixed bed reactor system for the production of high value gasoline range hydrocarbons (HC), Process Saf. Environ., 127, 171, 10.1016/j.psep.2019.05.008 · DOI
  42. Zhao, 2020, The chemistry and kinetics of polyethylene pyrolysis: a process to produce fuels and chemicals, ChemSusChem, no. 7, 1764, 10.1002/cssc.201903434 · DOI
  43. Chen, 2020, Effect of volatile reactions on oil production and composition in thermal and catalytic pyrolysis of polyethylene, Fuel, 271, 10.1016/j.fuel.2020.117308 · DOI
  44. Anene, 2018, Experimental study of thermal and catalytic pyrolysis of plastic waste components, Sustainability, 10, 3979, 10.3390/su10113979 · DOI
  45. Aisien, 2021, Thermal and catalytic pyrolysis of waste polypropylene plastic using spent FCC catalyst, Environ. Technol. Innov., 22, 10.1016/j.eti.2021.101455 · DOI
  46. Paucar-Sánchez, 2022, Characterization of liquid fraction obtained from pyrolysis of post- consumer mixed plastic waste: a comparing between measured and calculated parameters, Process Saf. Environ. Prot., 159, 1053, 10.1016/j.psep.2022.01.081 · DOI
  47. Singh, 2019, Impact of fast and slow pyrolysis on the degradation of mixed plastic waste: Product yield analysis and their characterization, J. Energy Inst., no. 6, 1647, 10.1016/j.joei.2019.01.009 · DOI
  48. Sharuddin, 2017, Energy recovery from pyrolysis of plastic waste: study on non-recycled plastics (NRP) data as the real measure of plastic waste, Energy Convers. Manag., 148, 925, 10.1016/j.enconman.2017.06.046 · DOI
  49. Muhammad, 2015, Thermal degradation of real-world waste plastics and simulated mixed plastics in a two-stage pyrolysis−catalysis reactor for fuel production, Energy Fuels, 29, 2601, 10.1021/ef502749h · DOI
  50. Budsaereechai, 2019, Catalytic pyrolysis of plastic waste for the production of liquid fuels for engines, RSC Adv., 9, 5844, 10.1039/C8RA10058F · DOI
  51. Auxilio, 2017, An experimental study on thermo-catalytic pyrolysis of plastic waste using a continuous pyrolyser, Waste Manag., 67, 143, 10.1016/j.wasman.2017.05.011 · DOI
  52. Zeaiter, 2014, A process study on the pyrolysis of waste polyethylene, Fuel, 133, 276, 10.1016/j.fuel.2014.05.028 · DOI
  53. Adrados, 2012, Pyrolysis of plastic packaging waste: A comparison of plastic residuals from material recovery facilities with simulated plastic waste, Waste Manag., 32, 826, 10.1016/j.wasman.2011.06.016 · DOI
  54. Santos, 2019, Degradation of polypropylene and polyethylene wastes over HZSM-5 and USY zeolites, Catal. Lett., 149, 798, 10.1007/s10562-019-02677-y · DOI
  55. Xue, Johnston, 2017, Effect of catalyst contact mode and gas atmosphere during catalytic pyrolysis of waste plastics, Energy Convers. Manag., 142, 441, 10.1016/j.enconman.2017.03.071 · DOI
  56. Ding, 2022, Pyrolysis dynamics of two medical plastic wastes: drivers, behaviors, evolved gases, reaction mechanisms, and pathways, J. Hazard. Mater., 402
  57. Duda, 2020, Design and operation of a modern polish plant for plasticwaste recycling through the degradative depolymerization process. A case study, Energies, 13, 6620, 10.3390/en13246620 · DOI
  58. Butler, 2011, Waste polyolefins to liquid fuels via pyrolysis: review of commercial state-of-the-art and recent laboratory research, Waste Biomass. Valor, 2, 227, 10.1007/s12649-011-9067-5 · DOI
  59. Palomar-Torres, 2022, Catalytic pyrolysis of plastic wastes for liquid oils’ production using ZAP USY zeolite as a catalyst, Int. J. Environ. Sci. Technol.
  60. Luo, 2021, Study on the reusability of kaolin as catalysts for catalytic pyrolysis of low-density polyethylene, Fuel, 302, 10.1016/j.fuel.2021.121164 · DOI
  61. Sonawane, 2015, Use of catalyst in pyrolysis of polypropylene waste into liquid fuel, Int. Res. J. Environ. Sci, no. 7, 24
  62. Nanda, 2021, Thermochemical conversion of plastic waste to fuels: a review, Environ. Chem. Lett., 19, 123, 10.1007/s10311-020-01094-7 · DOI · Paper page
  63. Karaduman, 2001, Flash pyrolysis of polystyrene wastes in a free-fall reactor under vacuum, J. Anal. Appl. Pyrolysis, 60, 179, 10.1016/S0165-2370(00)00169-8 · DOI
  64. Zayoud, 2022, Pyrolysis of end-of-life polystyrene in a pilot-scale reactor: maximizing styrene production, Waste Manag., 139, 85, 10.1016/j.wasman.2021.12.018 · DOI
  65. Murata, 2004, Effect of pressure on thermal degradation of polyethylene, J. Anal. Appl. Pyrolysis, 71, 569, 10.1016/j.jaap.2003.08.010 · DOI
  66. Cheng, 2020, Polyethylene high-pressure pyrolysis: Better product distribution and process mechanism analysis, Chem. Eng. J., 385, 10.1016/j.cej.2019.123866 · DOI
  67. Jiang, 2022, Low temperature upcycling of polyethylene to gasoline range chemicals: Hydrogen transfer and heat compensation to endothermic pyrolysis reaction over zeolites, J. Environ. Chem. Eng., 10, 10.1016/j.jece.2022.107492 · DOI
  68. Ciliz, 2004, Pyrolysis of virgin and waste polypropylene and its mixtures with waste polyethylene and polystyrene, Waste Manag., 24, 173, 10.1016/j.wasman.2003.06.002 · DOI
  69. Mangesh, 2020, Experimental investigation to identify the type of waste plastic pyrolysis oil suitable for conversion to diesel engine fuel, J. Clean. Prod., 246, 10.1016/j.jclepro.2019.119066 · DOI
  70. Albahri, 2003, Structural group contribution method for predicting the octane number of pure hydrocarbon liquids, Ind. Eng. Chem. Res., 42, 657, 10.1021/ie020306+ · DOI
  71. Gebre, 2021, Recent trends in the pyrolysis of non-degradable waste plastics, ChemistryOpen, 2021, 1202
  72. Kusenberg, 2022, A comprehensive experimental investigation of plastic waste pyrolysis oil quality and its dependence on the plastic waste composition, Fuel Process. Technol., 227, 10.1016/j.fuproc.2021.107090 · DOI
  73. Fraczak, 2021, Influence of the feedstock on the process parameters, product composition and pilot-scale cracking of plastics, Materials, 14, 3094, 10.3390/ma14113094 · DOI
  74. Morgano, 2015, Screw pyrolysis with integrated sequential hot gas filtration, J. Anal. Appl. Pyrolysis, 113, 216, 10.1016/j.jaap.2014.12.019 · DOI
  75. Morgano, 2018, Screw pyrolysis technology for sewage sludge treatment, Waste Manag., 73, 487, 10.1016/j.wasman.2017.05.049 · DOI
  76. Zeller, 2021, Chemical recycling of mixed plastic wastes by pyrolysis – pilot scale investigations, Chem. Ing. Tech, no. 11, 1763, 10.1002/cite.202100102 · DOI
  77. Miandad, 2016, Catalytic pyrolysis of plastic waste: a review, Process Saf. Environ. Prot., 102, 822, 10.1016/j.psep.2016.06.022 · DOI
  78. Orozco, 2021, Pyrolysis of plastic wastes in a fountain confined conical spouted bed reactor: determination of stable operating conditions, Energy Convers. Manag., 229, 10.1016/j.enconman.2020.113768 · DOI
  79. Artetxe, 2015, Styrene recovery from polystyrene by flash pyrolysis in a conical spouted bed reactor, Waste Manag., 45, 126, 10.1016/j.wasman.2015.05.034 · DOI
  80. Arabiourrutia, 2012, Characterization of the waxes obtained by the pyrolysis of polyolefin plastics in a conical spouted bed reactor, J. Anal. Appl. Pyrolysis, 94, 230, 10.1016/j.jaap.2011.12.012 · DOI
  81. Al-Salem, 2020, Pyro-oil and wax recovery from reclaimed plastic waste in a continuous auger pyrolysis reactor, Energies, 13, 2040, 10.3390/en13082040 · DOI
  82. Evangelopoulos, 2020, Performance analysis and fate of bromine in a single screw reactor for pyrolysis of waste electrical and electronic equipment (WEEE), Process Saf. Environ. Prot., 143, 313, 10.1016/j.psep.2020.07.006 · DOI
  83. Dengfei, 2018, Progress in technology and catalysts for continuous stirred tank reactor type slurry phase polyethylene processes, Pet. Chem., no. 3, 264
  84. Hussain, 2012, The conversion of waste polystyrene into useful hydrocarbons by microwave-metal interaction pyrolysis, Fuel Process. Technol., no. 1, 145, 10.1016/j.fuproc.2011.10.009 · DOI
  85. Aishwarya, 2016, Microwave assisted pyrolysis of plastic waste, Procedia Technol., 25, 990, 10.1016/j.protcy.2016.08.197 · DOI
  86. Russell, 2012, Microwave-assisted pyrolysis of HDPE using an activated carbon bed, RSC Adv., 2, 6756, 10.1039/c2ra20859h · DOI
  87. Quesada, 2020, Performance of different catalysts for the in situ cracking of the oil-waxes obtained by the pyrolysis of polyethylene film waste, Sustainability, 12, 5482, 10.3390/su12135482 · DOI
  88. Orozco, 2021, Conversion of HDPE into value products by fast pyrolysis using FCC spent catalysts in a fountain confined conical spouted bed reactor, ChemSusChem, 14, 4291, 10.1002/cssc.202100889 · DOI
  89. Chen, 2021, Deactivation of a Y-zeolite based catalyst with coke evolution during the catalytic pyrolysis of polyethylene for fuel oil, Appl. Catal. A, Gen., 609, 10.1016/j.apcata.2020.117873 · DOI
  90. Suhartono, 2018, Fuel oil from municipal plastic waste through pyrolysis with and without natural zeolite as catalysts, E3S Web Conf., 73, 01021, 10.1051/e3sconf/20187301021 · DOI
  91. Owusu, 2018, Reverse engineering of plastic waste into useful fuel products, J. Anal. Appl. Pyrolysis, 130, 285, 10.1016/j.jaap.2017.12.020 · DOI
  92. R. Sadeghbeigi, Fluid Catalytic Cracking Handbook: An Expert Guide to the Practical Operation, Design, and Optimization of FCC Units, 4th ed., San Diego: Elsevier Science & Technology., 2020.
  93. Lin, 2007, Catalytic pyrolysis of polyolefin waste into valuable hydrocarbons over reused catalyst from refinery FCC units, Appl. Catal. A: Gen., 328, 132, 10.1016/j.apcata.2007.05.039 · DOI
  94. Gopinath, 2020, 10, 37266
  95. Moqadam, 2015, Polystyrene pyrolysis using silica-alumina catalyst in fluidized bed, Clean. Technol. Environ. Policy, 17, 1847, 10.1007/s10098-015-0899-8 · DOI
  96. Jeon, 2012, Pyrolysis of an LDPE-LLDPE-EVA copolymer mixture over various mesoporous catalysts, Korean J. Chem. Eng., 29, no. 2, 196, 10.1007/s11814-011-0190-6 · DOI
  97. Lee, 2002, Comparison of plastic types for catalytic degradation of waste, Polym. Degrad. Stab., 78, 539, 10.1016/S0141-3910(02)00227-6 · DOI
  98. Dwivedi, 2021, High quality liquid fuel production from waste plastics via two-step cracking route in a bottom-up approach using bi-functional Fe/HZSM-5 catalyst, Waste Manag., 132, 151, 10.1016/j.wasman.2021.07.024 · DOI
  99. Klaimy, 2020, Flash catalytic pyrolysis of polyethylene over (alumino) silicate materials, ChemCatChem, 12, 1109, 10.1002/cctc.201901819 · DOI
  100. M. Artetxe, G. Lopez, M. Amutio, G. Elordi, J. Bilbao and M. Olazar, “Cracking of High Density Polyethylene Pyrolysis Waxes on HZSM-5 Catalysts of Different Acidity,” ACS Publications, 52, 10637−10645, 2013. · DOI
  101. Elordi, 2012, Effect of the acidity of the HZSM-5 zeolite catalyst on the cracking of high density polyethylene in a conical spouted bed reactor, Appl. Catal. A Gen., 415, 89, 10.1016/j.apcata.2011.12.011 · DOI
  102. Marino, 2022, ZSM-5 zeolites performance assessment in catalytic pyrolysis of PVC-containing real WEEE plastic wastes, Catal. Today, Vols. 390–391, 210, 10.1016/j.cattod.2021.11.033 · DOI
  103. Yarulina, 2018, Structure–performance descriptors and the role of Lewis acidity in the methanol-to-propylene process, Nat. Chem., 10, 804, 10.1038/s41557-018-0081-0 · DOI
  104. Panda, 2011, Catalytic performances of kaoline and silica alumina in the thermal degradation of polypropylene, J. FUEL Chem. Technol., 39, no. 3, 198, 10.1016/S1872-5813(11)60017-0 · DOI
  105. Lee, 2003, Thermal and catalytic degradation of waste high-density polyethylene (HDPE) using spent FCC catalyst, Korean J. Chem. Eng., no. 4, 693, 10.1007/BF02706909 · DOI
  106. Onwudili, 2019, Influence of catalyst bed temperature and properties of zeolite catalysts on pyrolysis-catalysis of a simulated mixed plastics sample for the production of upgraded fuels and chemicals, J. Energy Inst., 92, 1337, 10.1016/j.joei.2018.10.001 · DOI
  107. Wang, 2019, Recycling benzene and ethylbenzene from in-situ catalytic fast pyrolysis of plastic wastes, Energy Convers. Manag., 200, 10.1016/j.enconman.2019.112088 · DOI
  108. Kassargy, 2018, Gasoline and diesel-like fuel production by continuous catalytic pyrolysis of waste polyethylene and polypropylene mixtures over USY zeolite, Fuel, 224, 764, 10.1016/j.fuel.2018.03.113 · DOI
  109. Aguado, 2007, European trends in the feedstock recycling of plastic wastes, Glob. NEST J., 9, 12
  110. Y. Xingzhong, “Converting Waste Plastics into Liquid Fuel by Pyrolysis: Developments in China,” in F eeds tock R ecycling and P yrolys is of Was te P las tics: Converting Waste Plastics into Diesel and Other Fuels, J. Scheirs and W. Kaminsky, Eds., John Wiley & Sons, 2006, 729–755. · DOI
  111. Abnisa, 2021, Recovery of liquid fuel from fossil-based solid wastes via pyrolysis technique: a review, J. Environ. Chem. Eng., 9, 10.1016/j.jece.2021.106593 · DOI
  112. Ding, 2022, Co-combustion, life-cycle circularity, and artificial intelligence-based multi-objective optimization of two plastics and textile dyeing sludge, J. Hazard. Mater., 426, 10.1016/j.jhazmat.2021.128069 · DOI
  113. Dubdub, 2021, Pyrolysis of mixed plastic waste: II. Artificial neural networks prediction and sensitivity analysis, Appl. Sci., 11, 8456, 10.3390/app11188456 · DOI
  114. Pan, 2022, Waste plastic thermal pyrolysis analysis by a neural fuzzy model coupled with a genetic algorithm, Waste Biomass Valoriz., 2022, 135, 10.1007/s12649-021-01522-x · DOI
  115. Armenise, 2021, Application of computational approach in plastic pyrolysis, React. Kinet., Mech. Catal., 134, 591, 10.1007/s11144-021-02093-7 · DOI
  116. Gear, 2018, A life cycle assessment data analysis toolkit for the design of novel processes e A case study for a thermal cracking process for mixed plastic waste, J. Clean. Prod., 180, 735, 10.1016/j.jclepro.2018.01.015 · DOI
  117. Jeswani, 2021, Life cycle environmental impacts of chemical recycling via pyrolysis of mixed plastic waste in comparison with mechanical recycling and energy recovery, Sci. Total Environ., 769, 10.1016/j.scitotenv.2020.144483 · DOI
  118. Faraca, 2019, Environmental life cycle cost assessment: recycling of hard plastic waste collected at Danish recycling centres, Resour., Conserv. Recycl., 143, 299, 10.1016/j.resconrec.2019.01.014 · DOI
  119. Al-Salem, 2014, Life cycle assessment of alternative technologies for municipal solid waste and plastic solid waste management in the Greater London area, Chem. Eng. J., 244, 391, 10.1016/j.cej.2014.01.066 · DOI
  120. Khoo, 2019, LCA of plastic waste recovery into recycled materials, energy and fuels in Singapore, Resour., Conserv. Recycl., 145, 67, 10.1016/j.resconrec.2019.02.010 · DOI
  121. Costa, 2022, Critical evaluation of life cycle assessment analyses of plastic waste pyrolysis, ACS Sustain. Chem. Eng., 10, 3799, 10.1021/acssuschemeng.2c00265 · DOI
  122. Volk, 2021, Techno-economic assessment and comparison of different plastic recycling pathways, J. Ind. Ecol., 25, 1318, 10.1111/jiec.13145 · DOI
  123. Meys, 2020, Towards a circular economy for plastic packaging wastes – the environmental potential of chemical recycling, Resour., Conserv. Recycl., 162, 10.1016/j.resconrec.2020.105010 · DOI
  124. Somoza-Tornos, 2020, Realizing the potential high benefits of circular economy in the chemical industry: ethylene monomer recovery via polyethylene pyrolysis, ACS Sustain. Chem. Eng., 8, 3561, 10.1021/acssuschemeng.9b04835 · DOI
  125. Qureshi, 2020, Pyrolysis of plastic waste: opportunities and challenges, J. Anal. Appl. Pyrolysis, 152, 10.1016/j.jaap.2020.104804 · DOI
  126. Hossain, 2022, Full circle: challenges and prospects for plastic waste management in Australia to achieve circular economy, J. Clean. Prod., 368, 10.1016/j.jclepro.2022.133127 · DOI

Cited by

Sorted by citations

Metadata

Authors
Xayachak, T., Haque, N., Parthasarathy, R., King, S., Emami, N., Lau, D., & Pramanik, B. K.
Venue
Journal of Environmental Chemical Engineering
Publisher
Elsevier BV
Published
2022-12
Volume
10
Issue
6
Pages
108865
ISSN
2213-3437
DOI
10.1016/j.jece.2022.108865
Cited by
127
References
6
Language
en
Licence

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review