The DOI matches its Crossref record; 53 of the 53 references it cites were found in a registry or an index.
An exploratory study on using Slippery-Liquid-Infused-Porous-Surface (SLIPS) for wind turbine icing mitigation
Open accessAbstract
An experimental study was conducted to explore the potentials of using a Slippery-Liquid-Infused-Porous-Surface (SLIPS) for wind turbine icing mitigation. The SLIPS was prepared by infusing a lubricant oil into a nanofibrous membrane, which can stick firmly to the surface of a turbine blade model. While the SLIPS was found to effectively suppress impact ice accretion on the blade surface where strong aerodynamic forces are exerted, ice was still found to accrete in the vicinity of the blade stagnation line where aerodynamic forces are at their minimum. A novel hybrid anti-/de-icing strategy to integrate the SLIPS with a minimized leading-edge heating was demonstrated to effectively remove the ice accretion over entire blade surface. An comprehensive experimental study was also performed to evaluate the durability of the SLIPS to resist wearing away of the substrate materials and depletion of the infused lubricant oil due to “rain erosion” effects, in considering its practical usage for wind turbine icing mitigation. It was found that the “rain erosion” effects would induce significant surface wettability degradation, substantial ice adhesion increment and even structural failures to the SLIPS as the duration of the rain erosion testing increases.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“The frost adhesion on slippery liquid-infused porous surface is also significantly lower than that on other surfaces [111 -113].”
From Frosting mechanism and behaviors on surfaces with simple geometries: A state-of-the-art literature review (2022) · cites this paper as [112]
Citations
Cites
Wettability of porous surfaces
Cassie, A. B. D., & Baxter, S. (1944) · Transactions of the Faraday Society · doi:10.1039/tf9444000546 · Cited by 13,807
RESISTANCE OF SOLID SURFACES TO WETTING BY WATER
Wenzel, R. N. (1936) · Industrial & Engineering Chemistry · doi:10.1021/ie50320a024 · Cited by 13,316
Bioinspired self-repairing slippery surfaces with pressure-stable omniphobicity
Wong, T.-S., Kang, S. H., Tang, S. K. Y., Smythe, E. J., Hatton, B. D., Grinthal, A., & Aizenberg, J. (2011) · Nature · doi:10.1038/nature10447 · Cited by 4,134
Anti-Icing Superhydrophobic Coatings
Cao, L., Jones, A. K., Sikka, V. K., Wu, J., & Gao, D. (2009) · Langmuir · doi:10.1021/la902882b · Cited by 1,497
Liquid-Infused Nanostructured Surfaces with Extreme Anti-Ice and Anti-Frost Performance
Kim, P., Wong, T.-S., Alvarenga, J., Kreder, M. J., Adorno-Martinez, W. E., & Aizenberg, J. (2012) · ACS Nano · doi:10.1021/nn302310q · Cited by 1,316
Design of Ice-free Nanostructured Surfaces Based on Repulsion of Impacting Water Droplets
Mishchenko, L., Hatton, B., Bahadur, V., Taylor, J. A., Krupenkin, T., & Aizenberg, J. (2010) · ACS Nano · doi:10.1021/nn102557p · Cited by 1,217
Bio-Inspired Strategies for Anti-Icing
Lv, J., Song, Y., Jiang, L., & Wang, J. (2014) · ACS Nano · doi:10.1021/nn406522n · Cited by 1,009
Liquid-infused structured surfaces with exceptional anti-biofouling performance
Epstein, A. K., Wong, T.-S., Belisle, R. A., Boggs, E. M., & Aizenberg, J. (2012) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1201973109 · Cited by 928
Anti-icing and de-icing techniques for wind turbines: Critical review
Parent, O., & Ilinca, A. (2011) · Cold Regions Science and Technology · doi:10.1016/j.coldregions.2010.01.005 · Cited by 902
Relationships between Water Wettability and Ice Adhesion
Meuler, A. J., Smith, J. D., Varanasi, K. K., Mabry, J. M., McKinley, G. H., & Cohen, R. E. (2010) · ACS Applied Materials & Interfaces · doi:10.1021/am1006035 · Cited by 849
Bohn, H. F., & Federle, W. (2004) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.0405885101 · Cited by 781
Designing durable icephobic surfaces
Golovin, K., Kobaku, S. P. R., Lee, D. H., DiLoreto, E. T., Mabry, J. M., & Tuteja, A. (2016) · Science Advances · doi:10.1126/sciadv.1501496 · Cited by 686
A review of surface engineering issues critical to wind turbine performance
Dalili, N., Edrisy, A., & Carriveau, R. (2007) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2007.11.009 · Cited by 658
Hydrophilic directional slippery rough surfaces for water harvesting
Dai, X., Sun, N., Nielsen, S. O., Stogin, B. B., Wang, J., Yang, S., & Wong, T.-S. (2018) · Science Advances · doi:10.1126/sciadv.aaq0919 · Cited by 553
Aircraft anti-icing and de-icing techniques and modeling
Thomas, S. K., Cassoni, R. P., & MacArthur, C. D. (1996) · Journal of Aircraft · doi:10.2514/3.47027 · Cited by 480
Effects of micro- and nano-structures on the self-cleaning behaviour of lotus leaves
Cheng, Y. T., Rodak, D. E., Wong, C. A., & Hayden, C. A. (2006) · Nanotechnology · doi:10.1088/0957-4484/17/5/032 · Cited by 469
Exploiting Topographical Texture To Impart Icephobicity
Meuler, A. J., McKinley, G. H., & Cohen, R. E. (2010) · ACS Nano · doi:10.1021/nn103214q · Cited by 423
Zhang, P., & Lv, F. Y. (2015) · Energy · doi:10.1016/j.energy.2015.01.061 · Cited by 418
Sojoudi, H., Wang, M., Boscher, N. D., McKinley, G. H., & Gleason, K. K. (2016) · Soft Matter · doi:10.1039/c5sm02295a · Cited by 352
Chen, J., Dou, R., Cui, D., Zhang, Q., Zhang, Y., Xu, F., Zhou, X., Wang, J., Song, Y., & Jiang, L. (2013) · ACS Applied Materials & Interfaces · doi:10.1021/am401004t · Cited by 332
Magnetic slippery extreme icephobic surfaces
Irajizad, P., Hasnain, M., Farokhnia, N., Sajadi, S. M., & Ghasemi, H. (2016) · Nature Communications · doi:10.1038/ncomms13395 · Cited by 284
Wind turbine performance under icing conditions
Hochart, C., Fortin, G., Perron, J., & Ilinca, A. (2007) · Wind Energy · doi:10.1002/we.258 · Cited by 271
Dai, X., Stogin, B. B., Yang, S., & Wong, T.-S. (2015) · ACS Nano · doi:10.1021/acsnano.5b04151 · Cited by 258
Wind Vision: A New Era for Wind Power in the United States
Wiser, R., Lantz, E., Mai, T., Zayas, J., DeMeo, E., Eugeni, E., Lin-Powers, J., & Tusing, R. (2015) · The Electricity Journal · doi:10.1016/j.tej.2015.09.016 · Cited by 256
Durability of a lubricant-infused Electrospray Silicon Rubber surface as an anti-icing coating
Liu, Q., Yang, Y., Huang, M., Zhou, Y., Liu, Y., & Liang, X. (2015) · Applied Surface Science · doi:10.1016/j.apsusc.2015.02.051 · Cited by 241
Self-citationAtmospheric icing impact on wind turbine production
Lamraoui, F., Fortin, G., Benoit, R., Perron, J., & Masson, C. (2014) · Cold Regions Science and Technology · doi:10.1016/j.coldregions.2013.12.008 · Cited by 236
Durable gels with ultra-low adhesion to ice
Beemer, D. L., Wang, W., & Kota, A. K. (2016) · Journal of Materials Chemistry A · doi:10.1039/c6ta07262c · Cited by 234
Reliable Measurement of the Receding Contact Angle
Korhonen, J. T., Huhtamäki, T., Ikkala, O., & Ras, R. H. A. (2013) · Langmuir · doi:10.1021/la400009m · Cited by 183
Phases of icing on wind turbine blades characterized by ice accumulation
Kraj, A. G., & Bibeau, E. (2009) · Renewable Energy · doi:10.1016/j.renene.2009.09.013 · Cited by 176
Wind Turbine Performance Under Icing Conditions
Jasinski, W., Noe, S., Selig, M. S., & Bragg, M. B. (1998) · Journal of Solar Energy Engineering · doi:10.1115/1.2888048 · Cited by 162
Antonini, C., Villa, F., & Marengo, M. (2014) · Experiments in Fluids · doi:10.1007/s00348-014-1713-9 · Cited by 157
Interfacial materials with special wettability
Wong, T., Sun, T., Feng, L., & Aizenberg, J. (2013) · MRS Bulletin · doi:10.1557/mrs.2013.99 · Cited by 156
Sarshar, M. A., Swarctz, C., Hunter, S. R., Simpson, J. T., & Choi, C. (2012) · Colloid & Polymer Science · doi:10.1007/s00396-012-2753-4 · Cited by 145
Liu, Y., & Hu, H. (2018) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2018.02.023 · Cited by 145
Self-citationHeat and mass transfer during ice accretion on aircraft wings with an improved roughness model
Fortin, G., Laforte, J.-L., & Ilinca, A. (2005) · International Journal of Thermal Sciences · doi:10.1016/j.ijthermalsci.2005.07.006 · Cited by 140
Gao, L., Liu, Y., Ma, L., & Hu, H. (2019) · Renewable Energy · doi:10.1016/j.renene.2019.03.112 · Cited by 134
Self-citationHabibi, H., Cheng, L., Zheng, H., Kappatos, V. A., Selcuk, C., & Gan, T. (2015) · Renewable Energy · doi:10.1016/j.renene.2015.05.025 · Cited by 129
Airfoil aerodynamics in icing conditions
Bragg, M. B., Gregorek, G. M., & Lee, J. D. (1986) · Journal of Aircraft · doi:10.2514/3.45269 · Cited by 117
An experimental study on soft PDMS materials for aircraft icing mitigation
Liu, Y., Ma, L., Wang, W., Kota, A. K., & Hu, H. (2018) · Applied Surface Science · doi:10.1016/j.apsusc.2018.04.032 · Cited by 116
Self-citationDynamics of drop impact on solid surfaces: evolution of impact force and self-similar spreading
Gordillo, L., Sun, T., & Cheng, X. (2018) · Journal of Fluid Mechanics · doi:10.1017/jfm.2017.901 · Cited by 110
High-Speed Imaging to Quantify Transient Ice Accretion Process over an Airfoil
Waldman, R. M., & Hu, H. (2015) · Journal of Aircraft · doi:10.2514/1.c033367 · Cited by 103
Self-citationGao, L., Liu, Y., Zhou, W., & Hu, H. (2018) · Renewable Energy · doi:10.1016/j.renene.2018.10.032 · Cited by 101
Self-citationZanon, A., Gennaro, M. D., & Kühnelt, H. (2017) · Renewable Energy · doi:10.1016/j.renene.2017.08.076 · Cited by 85
Impact of droplets on immiscible liquid films
Che, Z., & Matar, O. K. (2018) · Soft Matter · doi:10.1039/c7sm02089a · Cited by 80
Projected impacts of climate change on wind energy density in the United States
Johnson, D. L., & Erhardt, R. J. (2016) · Renewable Energy · doi:10.1016/j.renene.2015.06.005 · Cited by 77
Frozen Impacted Drop: From Fragmentation to Hierarchical Crack Patterns
Ghabache, É., Josserand, C., & Séon, T. (2016) · Physical Review Letters · doi:10.1103/physrevlett.117.074501 · Cited by 72
Research on experiment and numerical simulation of ultrasonic de-icing for wind turbine blades
Zeng, J., & Bing-liang, S. (2017) · Renewable Energy · doi:10.1016/j.renene.2017.06.045 · Cited by 68
Overview of cold climate wind energy: challenges, solutions, and future needs
Wallenius, T., & Lehtomäki, V. (2015) · Wiley Interdisciplinary Reviews Energy and Environment · doi:10.1002/wene.170 · Cited by 44
The adhesion of ice to lubricated surfaces
Baker, H. R., BASCOM, W. D., & Singleterry, C. R. (1962) · Journal of Colloid Science · doi:10.1016/0095-8522(62)90057-0 · Cited by 37
Quantification of the 3D shapes of the ice structures accreted on a wind turbine airfoil model
Gao, L., Veerakumar, R., Liu, Y., & Hu, H. (2019) · Journal of Visualization · doi:10.1007/s12650-019-00567-4 · Cited by 37
Self-citationDesigning air-independent slippery rough surfaces for condensation
Sirohia, G. K., & Dai, X. (2019) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2019.06.035 · Cited by 28
In situice and structure thickness monitoring using integrated and flexible ultrasonic transducers
Liu, Q., Wu, K.-T., Kobayashi, M., Jen, C. K., & Mrad, N. (2008) · Smart Materials and Structures · doi:10.1088/0964-1726/17/4/045023 · Cited by 21
Ice Adhesion Mechanisms of Erosion-Resistant Coatings
Soltis, J., Palacios, J. L., Eden, T. J., & Wolfe, D. E. (2014) · AIAA Journal · doi:10.2514/1.j053208 · Cited by 21
Research works printed but not linked: 2
- Kim, 2012, Liquid-infused nanostructured surfaces with extreme anti-ice and anti-frost performance, ACS Nano, 6, 6569, 10.1021/nn302310q · DOI · Paper page
- Lv, 2014, Bio-inspired strategies for anti-icing, ACS Nano, 8, 3152, 10.1021/nn406522n · DOI · Paper page
Cited by
Zhang, L., Song, M., Deng, S., Shen, J., & Dang, C. (2022) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2022.118984 · Cited by 83
Metadata
- Authors
- Ma, L., Zhang, Z., Gao, L., Liu, Y., & Hu, H.
- Affiliations
- Iowa State University (US)
- Corresponding author
- Hu, Hui
- Venue
- Renewable Energy
- Publisher
- Elsevier BV
- Published
- 2020-12
- Volume
- 162
- Pages
- 2344-2360
- ISSN
- 0960-1481 (ISSN-L)
- OpenAlex
- W3091979561
- Cited by
- 62
- References
- 53
- Citations by year
- 2026: 9 · 2025: 11 · 2024: 15 · 2023: 12 · 2022: 7 · 2021: 8
- FWCI
- 3.93
- Type
- journal article
- Language
- en
- Open access
- bronze
- doi.org
- Licence
- www.elsevier.com/tdm/userlicense/1.0/ (tdm)
- www.elsevier.com/legal/tdmrep-license (tdm)
- www.elsevier.com/open-access/userlicense/1.0/ (am, 318 d)
- Locations
- Renewable Energy (acceptedVersion)
- RePEc: Research Papers in Economics (submittedVersion)
- Funders
- National Science Foundation
- Topics
- Physical Sciences › Engineering › Aerospace Engineering › Icing and De-icing Technologies
- Physical Sciences › Materials Science › Surfaces, Coatings and Films › Surface Modification and Superhydrophobicity
- Physical Sciences › Chemistry › Physical and Theoretical Chemistry › nanoparticles nucleation surface interactions
- Keywords
- slippery liquid-infused porous surfaces, wind turbine icing, ice accretion, turbine blades, anti-icing, de-icing, nanofibrous membranes, leading edge heating, rainfall erosion, ice adhesion, surface durability
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.