The DOI matches its Crossref record; 74 of the 74 references it cites were found in a registry or an index.
Natural fiber reinforced composites: Sustainable materials for emerging applications
Open accessAbstract
In the contemporary world, natural fibers reinforced polymer composite (NFRPC) materials are of great interest owing to their eco-friendly nature, lightweight, life-cycle superiority, biodegradability, low cost, noble mechanical properties. NFRPCs are widely applied in various engineering applications and this research field is continuously developing. However, the researchers are facing numerous challenges regarding the developments and applications of NFPRCs due to the inherent characteristics of natural fibers (NFs). These challenges include quality of the fiber, thermal stability, water absorption capacity, and incompatibility with the polymer matrices. Ecological and economic concerns are animating new research in the field of NFRPCs. Furthermore, considerable research is carried out to improve the performance of NFRPCs in recent years. This review highlights some of the important breakthroughs associated with the NFRPCs in terms of sustainability, eco-friendliness, and economic perspective. It also includes hybridization of NFs with synthetic fibers which is a highly effective way of improving the mechanical properties of NFRPCs along with some chemical treatment procedures. This review also elucidates the significance of using numerical models for NFRPCs. Finally, conclusions and recommendations are drawn to assist the researchers with future research directions.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Composites reinforced with cellulose based fibres
Bledzki, A. (1999) · Progress in Polymer Science · doi:10.1016/s0079-6700(98)00018-5 · Cited by 4,696 · cited 1×
“Wielage et al. [43], Abu Bakar et al. [44], Velde et al. [45], and Bledzki et al. [46] categorized polypropylene (PP), low-density polyethylene (LDPE), polyether ether ketone (PEEK), and high-density polyethylene (HDPE) as the polymer plastic matrices.”
Biocomposites reinforced with natural fibers: 2000–2010
Faruk, O., Bledzki, A. K., Fink, H.-P., & Sain, M. (2012) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2012.04.003 · Cited by 4,262
Are natural fiber composites environmentally superior to glass fiber reinforced composites?
Joshi, S. V., Drzal, L. T., Mohanty, A. K., & Arora, S. (2004) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2003.09.016 · Cited by 2,335
Silane coupling agents used for natural fiber/polymer composites: A review
Xie, Y., Hill, C. A. S., Xiao, Z., Militz, H., & Mai, C. (2010) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2010.03.005 · Cited by 2,244
Chemical treatments on plant-based natural fibre reinforced polymer composites: An overview
Kabir, M. M., Wang, H., Lau, K. T., & Cardona, F. (2012) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2012.04.053 · Cited by 1,851
A Review on Natural Fiber Reinforced Polymer Composite and Its Applications
Mohammed, L., Ansari, M. N. M., Pua, G., Jawaid, M., & Islam, M. S. (2015) · International Journal of Polymer Science · doi:10.1155/2015/243947 · Cited by 1,657
A review on the degradability of polymeric composites based on natural fibres
Azwa, Z. N., Yousif, B. F., Manalo, A. C., & Karunasena, W. (2013) · Materials & Design · doi:10.1016/j.matdes.2012.11.025 · Cited by 1,530
Analysis of the flax fibres tensile behaviour and analysis of the tensile stiffness increase
Baley, C. (2002) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/s1359-835x(02)00040-4 · Cited by 1,066
Gholampour, A., & Ozbakkaloglu, T. (2020) · Journal of Materials Science · doi:10.1007/s10853-019-03990-y · Cited by 1,058
M.R., S., Siengchin, S., Parameswaranpillai, J., Jawaid, M., Pruncu, C. I., & Khan, A. (2019) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2018.11.083 · Cited by 999
Composite materials science and engineering
Chawla, K. K. (1989) · Composites · doi:10.1016/0010-4361(89)90346-7 · Cited by 983
Valadez-Gonzalez, A., Cervantes-Uc, J. M., Olayo, R., & Herrera-Franco, P. J. (1999) · Composites Part B: Engineering · doi:10.1016/s1359-8368(98)00054-7 · Cited by 829
A review of natural fibers used in biocomposites: plant, animal and regenerated cellulose fibers
Ramamoorthy, S. K., Skrifvars, M., & Persson, A. (2015) · Polymer Reviews · doi:10.1080/15583724.2014.971124 · Cited by 801
AL-Oqla, F. M., & Sapuan, S. M. (2014) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2013.10.050 · Cited by 782
Marine Application of Fiber Reinforced Composites: A Review
Rubino, F., Nisticò, A., Tucci, F., & Carlone, P. (2020) · Journal of Marine Science and Engineering · doi:10.3390/jmse8010026 · Cited by 768
Plant-based natural fibre reinforced cement composites: A review
Onuaguluchi, O., & Banthia, N. (2016) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2016.02.014 · Cited by 698
Critical factors on manufacturing processes of natural fibre composites
Ho, M.-P., Wang, H., Lee, J.-H., Ho, C.-K., Lau, K.-T., Leng, J., & Hui, D. (2012) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2011.10.001 · Cited by 663
Mechanical and water absorption behaviour of banana/sisal reinforced hybrid composites
Venkateshwaran, N., Elayaperumal, A., Alavudeen, A., & Thiruchitrambalam, M. (2011) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2011.03.002 · Cited by 543
Natural fiber reinforced polylactic acid composites: A review
Siakeng, R., Jawaid, M., Ariffin, H., Sapuan, S. M., Asim, M., & Saba, N. (2019) · Polymer Composites · doi:10.1002/pc.24747 · Cited by 524
Natural fiber–reinforced composites: A review on material, manufacturing, and machinability
Lotfi, A., Li, H., Dao, D. V., & Prusty, G. (2021) · Journal of Thermoplastic Composite Materials · doi:10.1177/0892705719844546 · Cited by 499
Nanocellulose: Recent Fundamental Advances and Emerging Biological and Biomimicking Applications
Heise, K., Kontturi, E., Allahverdiyeva, Y., Tammelin, T., Linder, M. B., Nonappa, & Ikkala, O. (2021) · Advanced Materials · doi:10.1002/adma.202004349 · Cited by 425
Carbon storage potential in natural fiber composites
Pervaiz, M., & Sain, M. M. (2003) · Resources, Conservation and Recycling · doi:10.1016/s0921-3449(02)00173-8 · Cited by 413
Biagiotti, J., Puglia, D., & Kenny, J. M. (2004) · Journal of Natural Fibers · doi:10.1300/j395v01n02_04 · Cited by 412
Gopinath, A., Kumar, M. S., & Elayaperumal, A. (2014) · Procedia Engineering · doi:10.1016/j.proeng.2014.12.448 · Cited by 405
Composite materials: science and engineering
(2013) · Choice Reviews Online · doi:10.5860/choice.50-3872 · Cited by 393
Kumar, R., Ul Haq, M. I., Raina, A., & Anand, A. (2019) · International Journal of Sustainable Engineering · doi:10.1080/19397038.2018.1538267 · Cited by 354
A review on laser cladding of high-entropy alloys, their recent trends and potential applications
Arif, Z. U., Khalid, M. Y., ur Rehman, E., Ullah, S., Atif, M., & Tariq, A. (2021) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2021.06.041 · Cited by 334
Self-citationMechanical Properties of Hybrid Fibers-Reinforced Polymer Composite: A Review
Gupta, M. K., & Srivastava, R. (2015) · Polymer-Plastics Technology and Engineering · doi:10.1080/03602559.2015.1098694 · Cited by 329
Mohanty, A. K., Wibowo, A., Misra, M., & Drzal, L. T. (2004) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2003.09.015 · Cited by 317
Rana, A. K., Mandal, A., & Bandyopadhyay, S. (2003) · Composites Science and Technology · doi:10.1016/s0266-3538(02)00267-1 · Cited by 314
Comparative Evaluation on Properties of Hybrid Glass Fiber- Sisal/Jute Reinforced Epoxy Composites
Ramesh, M., Palanikumar, K., & Reddy, K. H. (2013) · Procedia Engineering · doi:10.1016/j.proeng.2013.01.106 · Cited by 310
Lertwattanaruk, P., & Suntijitto, A. (2015) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2015.07.154 · Cited by 292
Poly(Vinyl Alcohol)-Based Nanofibrous Electrospun Scaffolds for Tissue Engineering Applications
Teixeira, M. A., Amorim, M. T. P., & Felgueiras, H. P. (2019) · Polymers · doi:10.3390/polym12010007 · Cited by 287
Silva, G., Kim, S., Aguilar, R., & Nakamatsu, J. (2019) · Sustainable materials and technologies · doi:10.1016/j.susmat.2019.e00132 · Cited by 270
Khalid, M. Y., Al Rashid, A., Arif, Z. U., Ahmed, W., & Arshad, H. (2021) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2021.07.128 · Cited by 260
Self-citationOn the mechanical properties, deformation and fracture of a natural fibre/recycled polymer composite
Singleton, A. C. N., Baillie, C. A., Beaumont, P. W. R., & Peijs, T. (2003) · Composites Part B Engineering · doi:10.1016/s1359-8368(03)00042-8 · Cited by 256
Compounding and mechanical properties of biodegradable hemp fibre composites
Keller, A. (2003) · Composites Science and Technology · doi:10.1016/s0266-3538(03)00102-7 · Cited by 245
Comprehensive review on plant fiber-reinforced polymeric biocomposites
Mahmud, S., Hasan, K. M. F., Jahid, M. A., Mohiuddin, K., Zhang, R., & Zhu, J. (2021) · Journal of Materials Science · doi:10.1007/s10853-021-05774-9 · Cited by 245
Resin transfer molding of natural fiber reinforced composites: cure simulation
Rouison, D., Sain, M. M., & Couturier, M. F. (2003) · Composites Science and Technology · doi:10.1016/j.compscitech.2003.06.001 · Cited by 244
Sun, X., Gao, Z., Cao, P., & Zhou, C. (2019) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2019.01.018 · Cited by 225
Development of Natural Fiber Nonwovens for Application as Car Interiors for Noise Control
Thilagavathi, G., Pradeep, E., Kannaian, T., & Sasikala, L. (2010) · Journal of Industrial Textiles · doi:10.1177/1528083709347124 · Cited by 221
Hybridized carbon and flax fiber composites for tailored performance
Flynn, J., Amiri, A., & Ulven, C. (2016) · Materials & Design · doi:10.1016/j.matdes.2016.03.164 · Cited by 218
Amiandamhen, S. O., Meincken, M., & Tyhoda, L. (2020) · Fibers and Polymers · doi:10.1007/s12221-020-9362-5 · Cited by 206
Potential of using coconut shell particle fillers in eco-composite materials
Sarki, J., Hassan, S. B., Aigbodion, V. S., & Oghenevweta, J. E. (2011) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2010.11.025 · Cited by 200
E-Glass Fiber Reinforced Composites in Dental Applications
Zhang, M., & Matinlinna, J. P. (2012) · Silicon · doi:10.1007/s12633-011-9075-x · Cited by 199
Processing of natural-fibre reinforced polymers and the resulting dynamic–mechanical properties
Wielage, B., Lampke, T., Utschick, H., & Soergel, F. (2003) · Journal of Materials Processing Technology · doi:10.1016/s0924-0136(03)00195-x · Cited by 198
Khalid, M. Y., Imran, R., Arif, Z. U., Akram, N., Arshad, H., Rashid, A. A., & Márquez, F. P. G. (2021) · Coatings · doi:10.3390/coatings11030293 · Cited by 197
Self-citationNatural Fiber Composites: A Review
Westman, M. P., Fifield, L. S., Simmons, K. L., Laddha, S., & Kafentzis, T. A. (2010) · OSTI OAI (U.S. Department of Energy Office of Scientific and Technical Information) · doi:10.2172/989448 · Cited by 185
Van de Velde, K., & Kiekens, P. (2001) · Polymer Testing · doi:10.1016/s0142-9418(01)00017-4 · Cited by 182
Sanjay, M. R., Arpitha, G. R., Senthamaraikannan, P., Kathiresan, M., Saibalaji, M. A., & Yogesha, B. (2019) · Journal of Natural Fibers · doi:10.1080/15440478.2018.1431828 · Cited by 175
Hybridization effect on the mechanical properties of curaua/glass fiber composites
Almeida, J. H. S., Amico, S. C., Botelho, E. C., et al. (2013) · Composites Part B Engineering · doi:10.1016/j.compositesb.2013.07.014 · Cited by 160
Zafeiropoulos, N. E., Baillie, C. A., & Hodgkinson, J. (2002) · Composites Part A Applied Science and Manufacturing · doi:10.1016/s1359-835x(02)00088-x · Cited by 146
Graphene-Incorporated Natural Fiber Polymer Composites: A First Overview
da Luz, F. S., Filho, F. D. C. G., Río, T. G.-D., Nascimento, L. F. C., Pinheiro, W. A., & Monteiro, S. N. (2020) · Polymers · doi:10.3390/polym12071601 · Cited by 146
Carbon footprint considerations for biocomposite materials for sustainable products: A review
Aguirre, J. P. C., Montalvo-Navarrete, J. M., & Hidalgo‐Salazar, M. A. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2018.10.099 · Cited by 145
Green Composites from Natural Resources
Thakur, V. K. (2013) · CRC Press eBooks · doi:10.1201/b16076 · Cited by 134
Khalid, M. Y., Rashid, A. A., Arif, Z. U., Sheikh, M. F., Arshad, H., & Nasir, M. A. (2021) · Results in Engineering · doi:10.1016/j.rineng.2021.100232 · Cited by 129
Self-citationComparative evaluation of fiber treatments on the creep behavior of jute/green epoxy composites
Militký, J., & Jabbar, A. (2015) · Composites Part B Engineering · doi:10.1016/j.compositesb.2015.06.014 · Cited by 121
Bisaria, H., Gupta, M. K., Shandilya, P., & Srivastava, R. (2015) · Materials Today Proceedings · doi:10.1016/j.matpr.2015.07.031 · Cited by 121
Asrofi, M., Abral, H., Kasim, A., Pratoto, A., Mahardika, M., Park, J., & Kim, H. (2018) · Fibers and Polymers · doi:10.1007/s12221-018-7953-1 · Cited by 119
Neuba, L. D. M., Junio, R. F. P., Ribeiro, M. P., Souza, A. T., Lima, E. D. S., Filho, F. D. C. G., Figueiredo, A. B. D. S., Braga, F. D. O., de Azevedo, A. R. G., & Monteiro, S. N. (2020) · Polymers · doi:10.3390/polym12081776 · Cited by 104
Natural Fiber Reinforced Polymer in Automotive Application: A Systematic Literature Review
Huda, M. K., & Widiastuti, I. (2021) · Journal of Physics Conference Series · doi:10.1088/1742-6596/1808/1/012015 · Cited by 102
Noman, M. T., Petrů, M., Militký, J., Azeem, M., & Ashraf, M. A. (2019) · Materials · doi:10.3390/ma13010014 · Cited by 100
Mukhtar, I., Leman, Z., Zainudin, E. S., & Ishak, M. R. (2018) · Journal of Natural Fibers · doi:10.1080/15440478.2018.1537872 · Cited by 80
Thermoplastic/Natural Filler Composites: A Short Review
Universiti Sains Malaysia, M., Zaaba, N. F., Ismail, H., & Universiti Sains Malaysia, M. (2019) · Journal of Physical Science · doi:10.21315/jps2019.30.s1.5 · Cited by 77
Biodegradation of a vegetable oil based polyurethane and wood flour composites
Aranguren, M. I., González, J. F., & Mosiewicki, M. A. (2011) · Polymer Testing · doi:10.1016/j.polymertesting.2011.09.001 · Cited by 74
Odeyemi, S. O., Abdulwahab, R., Adeniyi, A. G., & Atoyebi, O. D. (2020) · Results in Engineering · doi:10.1016/j.rineng.2020.100126 · Cited by 73
Environmental aspects of fiber crops cultivation and use
Fernando, A. L. A. D. C., Duarte, M. P., Vatsanidou, A., & Alexopoulou, E. (2014) · Industrial Crops and Products · doi:10.1016/j.indcrop.2014.10.003 · Cited by 65
Guaruman fiber: another possible reinforcement in composites
Reis, R. H. M., Nunes, L. F., Oliveira, M. S., da Veiga, V. F., Filho, F. D. C. G., Pinheiro, M. A., Cândido, V. S., & Monteiro, S. N. (2019) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2019.11.002 · Cited by 60
Strength evaluation of jute fabric for the reinforcement of rammed earth structures
Fagone, M., Loccarini, F., & Ranocchiai, G. (2017) · Composites Part B Engineering · doi:10.1016/j.compositesb.2016.12.054 · Cited by 59
Effect of Surface Modification of Vetiver Fibers on Their Physical and Thermal Properties
Jena, P. K., Mohanty, J. R., & Nayak, S. (2020) · Journal of Natural Fibers · doi:10.1080/15440478.2020.1726249 · Cited by 59
Baihaqi, N. M. Z. N., Khalina, A., Norizan, M. N., Aisyah, H. A., Sapuan, S. M., & Ilyas, R. A. (2021) · Polimery · doi:10.14314/polimery.2021.1.5 · Cited by 53
Hybridization of Hemp Fiber and Recycled-Carbon Fiber in Polypropylene Composites
Shah, N. C., Fehrenbach, J., & Ulven, C. A. (2019) · Sustainability · doi:10.3390/su11113163 · Cited by 45
Salisu, Z. M., Ishiaku, S. U., Abdullahi, D., Yakubu, M. K., & Hasan, D. B. (2019) · Results in Engineering · doi:10.1016/j.rineng.2019.100020 · Cited by 30
de Melo, R. P., Marques, M. D. F. V., Navard, P., & Duque, N. P. (2017) · Journal of Composite Materials · doi:10.1177/0021998317690446 · Cited by 22
Cited by
Sustainable Fiber‐Reinforced Composites: A Review
Maiti, S., Islam, M. R., Uddin, M. A., Afroj, S., Eichhorn, S. J., & Karim, N. (2022) · Advanced Sustainable Systems · doi:10.1002/adsu.202200258 · Cited by 493
Kamarudin, S. H., Mohd Basri, M. S., Rayung, M., Abu, F., Ahmad, S., Norizan, M. N., Osman, S., Sarifuddin, N., Desa, M. S. Z. M., Abdullah, U. H., et al. (2022) · Polymers · doi:10.3390/polym14173698 · Cited by 459
Arif, Z. U., Khalid, M. Y., Noroozi, R., Sadeghianmaryan, A., Jalalvand, M., & Hossain, M. (2022) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2022.07.140 · Cited by 395
Self-citationKhalid, M. Y., Arif, Z. U., Ahmed, W., & Arshad, H. (2022) · Sustainable Materials and Technologies · doi:10.1016/j.susmat.2021.e00382 · Cited by 314
Self-citationBiopolymeric sustainable materials and their emerging applications
Arif, Z. U., Khalid, M. Y., Sheikh, M. F., Zolfagharian, A., & Bodaghi, M. (2022) · Journal of Environmental Chemical Engineering · doi:10.1016/j.jece.2022.108159 · Cited by 288
Self-citation
Metadata
- Authors
- Khalid, M. Y., Al Rashid, A., Arif, Z. U., Ahmed, W., Arshad, H., & Zaidi, A. A.
- Venue
- Results in Engineering
- Publisher
- Elsevier BV
- Published
- 2021-09
- Volume
- 11
- Pages
- 100263
- ISSN
- 2590-1230 (ISSN-L)
- OpenAlex
- W3191678740
- Cited by
- 600
- References
- 74
- FWCI
- 30.96
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.