Lithium in thermal energy storage: A state-of-the-art review
Open accessThe DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Abstract
Lithium, mainly used in electrical energy storage, has also been studied in thermal energy storage. It is recognized as a “critical material” and is produced from minerals and from brines. Chile is one of the biggest producers, here from brine and with lower costs than in other countries. With sensible heat storage, in solar power plants lithium is seen as a way to improve the properties of molten salts used today. The low melting point in these ternary salts with lithium, represent a considerable reduction in the maintenance and operational costs associated with current solar technology, demonstrating that the fluids showed, are potential candidates for thermal energy storage (TES) in concentrated solar plants (CSP) plants. Many materials have been studied and proposed to be used as phase change materials (PCM). Between the multiple materials studied to be used in PCM, lithium materials and mixtures are listed as potential PCM for building applications and for high temperature applications. In thermochemical energy storage, lithium compounds have been used mainly in chemical heat pumps, following their use in absorption cooling.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Review on thermal energy storage with phase change materials and applications
Sharma, A., Tyagi, V. V., Chen, C. R., & Buddhi, D. (2009) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2007.10.005 · Cited by 5,936
Heat and cold storage with PCM: An up to date introduction into basics and applications
Mehling, H., & Cabeza, L. F. (2008) · Heat and Mass Transfer · doi:10.1007/978-3-540-68557-9 · Cited by 894
Self-citationGrosjean, C., Miranda, P. H., Perrin, M., & Poggi, P. (2012) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2011.11.023 · Cited by 847
Research works printed but not linked: 25
- Ruankham, 2011, Vertically aligned ZnO nanorods doped with lithium for polymer solar cells: defect related photovoltaic properties, J Mater Chem, 21, 9710, 10.1039/c0jm04452k · doi:10.1039/c0jm04452k
- Qingjiang Yu, 2010, Solar cells: the influence of lithium ions on exciton dissociation, charge recombination, and surface states, ACS Nano, 4, 6032, 10.1021/nn101384e · DOI · Paper page
- Macklin, 1992, Electrochemical intercalation of alkali metals into superconducting oxide phases, J Mater Chem, 2, 439, 10.1039/jm9920200439 · doi:10.1039/jm9920200439
- Matusita, 1993, Interface reaction between oxide glasses and Fe–Al–Si magnetic alloy, J Mater Sci, 28, 6333, 10.1007/BF01352193 · doi:10.1007/bf01352193
- Pletka, 2001, Indirectly heated biomass gasification using a latent heat ballast—1: Experimental evaluations, Biomass Bioenergy, 20, 297, 10.1016/S0961-9534(00)00088-X · DOI
- Andersson, 1987, Thermal conductivity and heat capacity of single-crystal LiF and CaF2 under hydrostatic pressure, J Phys C: Solid State Phys, 20, 5951, 10.1088/0022-3719/20/35/011 · doi:10.1088/0022-3719/20/35/011
- Cabeza LF, Castell A, Barreneche C, de Gracia A, Fernández AI. Materials used as PCM in thermal energy storage in buildings: a review. Renewable Sustainable Energy Rev2011:15;1675–1695. 10.1016/j.rser.2010.11.018. · DOI · Paper page
- Khudhair, 2004, A review on energy conservation in building applications with thermal storage by latent heat using phase change materials, Energy Convers Manage, 45, 263, 10.1016/S0196-8904(03)00131-6 · DOI · Paper page
- Michels, 2007, Cascaded latent heat storage for parabolic trough solar power plants, Sol Energy, 81, 829, 10.1016/j.solener.2006.09.008 · DOI · Paper page
- Solé, 2013, Requirements to consider when choosing a thermochemical material for solar energy storage, Sol Energy, 97, 398, 10.1016/j.solener.2013.08.038 · doi:10.1016/j.solener.2013.08.038
- Grágeda M. Production of battery grade lithium hydroxide: energy efficiency and water consumption. In: First international workshop in “lithium, industrial minerals and energy”, Antofagasta, Chile; 2014.
- CES Selector 2013 software, Granta Design Limited, Cambridge, UK; 2013. 〈www.Grantadesign.com〉.
- Gil A, Medrano M, Martorell I, Lázaro A, Dolado P, Zalba B, et al. State of the art on high temperature thermal energy storage for power generation. Part 1—Concepts, materials and modellization. Renewable Sustainable Energy Rev 2010:14;31–55. 10.1016/j.rser.2009.07.035. · DOI · Paper page
- Medrano, 2010, State of the art on high temperature thermal energy storage for power generation. Part 2—Case studies, Renewable Sustainable Energy Rev, 56, 10.1016/j.rser.2009.07.036 · DOI · Paper page
- Wang, 2012, Thermal stability of the eutectic composition in LiNO3–NaNO3–KNO3 ternary system used for thermal energy storage, Sol Energy Mater Sol Cells, 100, 162, 10.1016/j.solmat.2012.01.009 · doi:10.1016/j.solmat.2012.01.009
- Bradshaw, 1990, High-temperature stability of ternary nitrate molten salts for solar thermal energy systems, Sol Energy Mater, 21, 51, 10.1016/0165-1633(90)90042-Y · doi:10.1016/0165-1633(90)90042-y
- Fernández AG, Ushak S, Galleguillos H, Pérez FJ. Development of new molten salts with LiNO3 and Ca(NO3)2 for energy storage in CSP plants. Appl Energy 2014:119;131–140. 10.1016/j.apeneergy.2013.12.061. · doi:10.1016/j.apenergy.2013.12.061
- Olivares, 2012, The thermal stability of molten lithium–sodium–potassium carbonate and the influence of additives on the melting point, J Sol Energy Eng, 134, 10.1115/1.4006895 · DOI
- Zalba, 2003, Review on thermal energy storage with phase change: materials, heat transfer analysis and applications, Appl Therm Eng, 23, 251, 10.1016/S1359-4311(02)00192-8 · DOI · Paper page
- Shamberger, 2012, Thermophysical properties of lithium nitrate trihydrate from (253 to 353)K, J Chem Eng Data, 57, 1404, 10.1021/je3000469 · DOI
- Ge, 2014, Carbonate-salt-based composite materials for medium- and high-temperature thermal energy storage, Particuology, 15, 77, 10.1016/j.partic.2013.09.002 · DOI
- Cot-Gores J, Castell A, Cabeza LF. Thermochemical energy storage and conversion: a-state-of-the-art review of the experimental research under practical conditions. Renewable Sustainable Energy Rev 2012:16;5207–5224. 10.1016/j.rser.2012.04.007. · DOI
- Kiplagat JK, Wang RZ, Oliveira RG, Li TX. Lithium chloride-expanded graphite composite sorbent for solar powered ice maker. Sol Energy 2010;84:1587–1594. 10.1016/j.solener.2010.06.014. · doi:10.1016/j.solener.2010.06.014
- Haije, 2007, Solid/vapour sorption heat transformer: design and performance, Appl Therm Eng, 7, 1371, 10.1016/j.applthermaleng.2006.10.022 · DOI
- Ishitobi, 2013, Dehydration and hydration behavior of metal-salt-modified materials for chemical heat pumps, Appl Therm Eng, 50, 10.1016/j.applthermaleng.2011.07.020 · DOI
Cited by
A review on phase change material (PCM) for sustainable passive cooling in building envelopes
Akeiber, H., Nejat, P., Majid, M. Z. A., Wahid, M. A., Jomehzadeh, F., Zeynali Famileh, I., Calautit, J. K., Hughes, B. R., & Zaki, S. A. (2016) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2016.03.036 · Cited by 1,075
Thermal energy storage: Recent developments and practical aspects
Zhang, H., Baeyens, J., Cáceres, G., Degrève, J., & Lv, Y. (2016) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2015.10.003 · Cited by 910
Xu, Y., Ren, Q., Zheng, Z.-J., & He, Y.-L. (2017) · Applied Energy · doi:10.1016/j.apenergy.2017.02.019 · Cited by 393
Li, Z., Lu, Y., Huang, R., Chang, J., Yu, X., Jiang, R., Yu, X., & Roskilly, A. P. (2021) · Applied Energy · doi:10.1016/j.apenergy.2020.116277 · Cited by 342
Nie, X.-Y., Sun, S.-Y., Song, X., & Yu, J.-G. (2017) · Journal of Membrane Science · doi:10.1016/j.memsci.2017.02.020 · Cited by 195
Metadata
- Authors
- Cabeza, L. F., Gutierrez, A., Barreneche, C., Ushak, S., Fernández, Á. G., Inés Fernádez, A., & Grágeda, M.
- Venue
- Renewable and Sustainable Energy Reviews
- Publisher
- Elsevier BV
- Published
- 2015-02
- Volume
- 42
- Pages
- 1106-1112
- ISSN
- 1364-0321 (ISSN-L)
- OpenAlex
- W2046329130
- Cited by
- 128
- References
- 3
- FWCI
- 10.91
- Type
- journal article
- Language
- en
- Open access
- green
- Licence
- www.elsevier.com/tdm/userlicense/1.0/ (tdm)
- Funders
- Spanish Project (ENE2011-22722, ENE2011-28269-C03-02)
- European Union׳s Seventh Framework Programme (FP7/2007-2013)
- FONDECYT (1120422)
- FONDAP SERC-Chile (15110019)
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Lithium in thermal energy storage: A state-of-the-art review. https://app.cochat.ai/papers/10.1016/j.rser.2014.10.096
- The paper
- Cabeza, L. F., Gutierrez, A., Barreneche, C., Ushak, S., Fernández, Á. G., Inés Fernádez, A., & Grágeda, M. (2015). Lithium in thermal energy storage: A state-of-the-art review. Renewable and Sustainable Energy Reviews. https://doi.org/10.1016/j.rser.2014.10.096
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.