The DOI matches its Crossref record; 83 of the 83 references it cites were found in a registry or an index.
Review of solid–liquid phase change materials and their encapsulation technologies
Open accessAbstract
Various types of solid–liquid phase change materials (PCMs) have been reviewed for thermal energy storage applications. The review has shown that organic solid–liquid PCMs have much more advantages and capabilities than inorganic PCMs but do possess low thermal conductivity and density as well as being flammable. Inorganic PCMs possess higher heat storage capacities and conductivities, cheaper and readily available as well as being non-flammable, but do experience supercooling and phase segregation problems during phase change process. The review has also shown that eutectic PCMs have unique advantage since their melting points can be adjusted. In addition, they have relatively high thermal conductivity and density but they possess low latent and specific heat capacities. Encapsulation technologies and shell materials have also been examined and limitations established. The morphology of particles was identified as a key influencing factor on the thermal and chemical stability and the mechanical strength of encapsulated PCMs. In general, in-situ polymerization method appears to offer the best technological approach in terms of encapsulation efficiency and structural integrity of core material. There is however the need for the development of enhancement methods and standardization of testing procedures for microencapsulated PCMs.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Review on thermal energy storage with phase change materials and applications
Sharma, A., Tyagi, V. V., Chen, C. R., & Buddhi, D. (2009) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2007.10.005 · Cited by 5,936
A review on phase change energy storage: materials and applications
Farid, M. M., Khudhair, A. M., Razack, S. A. K., & Al-Hallaj, S. (2004) · Energy Conversion and Management · doi:10.1016/j.enconman.2003.09.015 · Cited by 3,097
Agyenim, F., Hewitt, N., Eames, P., & Smyth, M. (2010) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2009.10.015 · Cited by 2,072
Thermal conductivity measurement from 30 to 750 K: the 3ω method
Cahill, D. G. (1990) · Review of Scientific Instruments · doi:10.1063/1.1141498 · Cited by 1,928
Review on thermal energy storage with phase change materials (PCMs) in building applications
Zhou, D., Zhao, C. Y., & Tian, Y. (2012) · Applied Energy · doi:10.1016/j.apenergy.2011.08.025 · Cited by 1,896
Materials used as PCM in thermal energy storage in buildings: A review
Cabeza, L. F., Castell, A., Barreneche, C., de Gracia, A., & Fernández, A. I. (2011) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2010.11.018 · Cited by 1,889
Kirk‐Othmer Encyclopedia of Chemical Technology
(2007) · Reference Reviews · doi:10.1108/09504120710728879 · Cited by 1,156
Review on phase change materials (PCMs) for cold thermal energy storage applications
Oró, E., de Gracia, A., Castell, A., Farid, M. M., & Cabeza, L. F. (2012) · Applied Energy · doi:10.1016/j.apenergy.2012.03.058 · Cited by 1,144
A review on phase change materials integrated in building walls
Kuznik, F., David, D., Johannes, K., & Roux, J.-J. (2011) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2010.08.019 · Cited by 1,057
Phase change materials for building applications: A state-of-the-art review
Baetens, R., Jelle, B. P., & Gustavsen, A. (2010) · Energy and Buildings · doi:10.1016/j.enbuild.2010.03.026 · Cited by 997
Cited by
A Comprehensive Review of Thermal Energy Storage
Sarbu, I., & Sebarchievici, C. (2018) · Sustainability · doi:10.3390/su10010191 · Cited by 1,311
A review on phase change material (PCM) for sustainable passive cooling in building envelopes
Akeiber, H., Nejat, P., Majid, M. Z. A., Wahid, M. A., Jomehzadeh, F., Zeynali Famileh, I., Calautit, J. K., Hughes, B. R., & Zaki, S. A. (2016) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2016.03.036 · Cited by 1,075
Thermal energy storage materials and systems for solar energy applications
Alva, G., Liu, L., Huang, X., & Fang, G. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2016.10.021 · Cited by 996
Energy storage systems: a review
Mitali, J., Dhinakaran, S., & Mohamad, A. A. (2022) · Energy Storage and Saving · doi:10.1016/j.enss.2022.07.002 · Cited by 911
Huang, X., Chen, X., Li, A., Atinafu, D., Gao, H., Dong, W., & Wang, G. (2019) · Chemical Engineering Journal · doi:10.1016/j.cej.2018.09.013 · Cited by 701
Phase change material thermal energy storage systems for cooling applications in buildings: A review
Faraj, K., Khaled, M., Faraj, J., Hachem, F., & Castelain, C. (2020) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2019.109579 · Cited by 519
Milián, Y. E., Gutiérrez, A., Grágeda, M., & Ushak, S. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.01.159 · Cited by 491
Kumar, L., Hasanuzzaman, M., & Rahim, N. A. (2019) · Energy Conversion and Management · doi:10.1016/j.enconman.2019.05.081 · Cited by 443
Wu, M. Q., Wu, S., Cai, Y. F., Wang, R. Z., & Li, T. X. (2021) · Energy Storage Materials · doi:10.1016/j.ensm.2021.07.019 · Cited by 409
Innovations in Smart Packaging Concepts for Food: An Extensive Review
Drago, E., Campardelli, R., Pettinato, M., & Perego, P. (2020) · Foods · doi:10.3390/foods9111628 · Cited by 402
Gao, H., Wang, J., Chen, X., Wang, G., Huang, X., Li, A., & Dong, W. (2018) · Nano Energy · doi:10.1016/j.nanoen.2018.09.007 · Cited by 391
Amin, M., Putra, N., Kosasih, E. A., Prawiro, E., Luanto, R. A., & Mahlia, T. M. I. (2017) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2016.10.085 · Cited by 370
Chandel, S. S., & Agarwal, T. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2016.09.070 · Cited by 359
Deng, Y., Li, J., Qian, T., Guan, W., Li, Y., & Yin, X. (2016) · Chemical Engineering Journal · doi:10.1016/j.cej.2016.03.068 · Cited by 351
Supercooling of phase-change materials and the techniques used to mitigate the phenomenon
Zahir, M. H., Mohamed, S. A., Saidur, R., & Al-Sulaiman, F. A. (2019) · Applied Energy · doi:10.1016/j.apenergy.2019.02.045 · Cited by 348
Sarbu, I., & Dorca, A. (2019) · International Journal of Energy Research · doi:10.1002/er.4196 · Cited by 347
Ghalambaz, M., Mehryan, S. A. M., Zahmatkesh, I., & Chamkha, A. (2020) · International Journal of Thermal Sciences · doi:10.1016/j.ijthermalsci.2020.106503 · Cited by 307
Phase Change Material (PCM) Microcapsules for Thermal Energy Storage
Peng, G., Dou, G., Hu, Y., Sun, Y., & Chen, Z. (2020) · Advances in Polymer Technology · doi:10.1155/2020/9490873 · Cited by 305
Jayathunga, D. S., Karunathilake, H. P., Narayana, M., & Witharana, S. (2024) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2023.113904 · Cited by 298
Liu, H., Wang, X., & Wu, D. (2019) · Sustainable Energy & Fuels · doi:10.1039/c9se00019d · Cited by 297
Reddy, K. S., Mudgal, V., & Mallick, T. K. (2018) · Journal of Energy Storage · doi:10.1016/j.est.2017.11.005 · Cited by 290
Encapsulation methods for phase change materials – A critical review
Huang, Y., Stonehouse, A., & Abeykoon, C. (2023) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2022.123458 · Cited by 286
Recent Developments in Nanocellulose-Based Aerogels in Thermal Applications: A Review
Ahankari, S., Paliwal, P., Subhedar, A., & Kargarzadeh, H. (2021) · ACS Nano · doi:10.1021/acsnano.0c09678 · Cited by 281
Huang, X., Alva, G., Jia, Y., & Fang, G. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.01.048 · Cited by 278
Yu, K., Liu, Y., & Yang, Y. (2021) · Applied Energy · doi:10.1016/j.apenergy.2021.116845 · Cited by 278
Liu, Y., Zheng, R., & Li, J. (2022) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2022.112783 · Cited by 276
Micro/nano-encapsulated phase change materials (PCMs) as emerging materials for the food industry
Alehosseini, E., & Jafari, S. M. (2019) · Trends in Food Science & Technology · doi:10.1016/j.tifs.2019.07.003 · Cited by 242
Allahbakhsh, A., & Arjmand, M. (2019) · Carbon · doi:10.1016/j.carbon.2019.04.009 · Cited by 180
Zhang, L., An, L., Wang, Y., Lee, A., Schuman, Y., Ural, A., Fleischer, A. S., & Feng, G. (2019) · Chemical Engineering Journal · doi:10.1016/j.cej.2019.05.104 · Cited by 98
Phase Change Materials for Application in Energy-Efficient Buildings
Jelle, B. P., & Kalnæs, S. E. (2017) · Cost-Effective Energy Efficient Building Retrofitting · doi:10.1016/b978-0-08-101128-7.00003-4 · Cited by 90
Raj, C. R., Suresh, S., Singh, V. K., Bhavsar, R. R., Chandrasekar, M., & Archita, V. (2021) · Journal of Energy Storage · doi:10.1016/j.est.2020.102220 · Cited by 29
Ji, K., Wi, S., Jun, H., Suh, J.-I., Song, H., & Yoon, J. (2025) · International Journal of Concrete Structures and Materials · doi:10.1186/s40069-025-00861-6 · Cited by 3
Metadata
- Authors
- Su, W., Darkwa, J., & Kokogiannakis, G.
- Venue
- Renewable and Sustainable Energy Reviews
- Publisher
- Elsevier BV
- Published
- 2015-08
- Volume
- 48
- Pages
- 373-391
- ISSN
- 1364-0321 (ISSN-L)
- OpenAlex
- W2034217076
- Cited by
- 1,037
- References
- 83
- FWCI
- 47.73
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.