The DOI matches its Crossref record; 153 of the 153 references it cites were found in a registry or an index.
Heat transfer enhancement of phase change materials for thermal energy storage applications: A critical review
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Review on thermal energy storage with phase change materials and applications
Sharma, A., Tyagi, V. V., Chen, C. R., & Buddhi, D. (2009) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2007.10.005 · Cited by 5,936
Zalba, B., Marı́n, J. M., Cabeza, L. F., & Mehling, H. (2003) · Applied Thermal Engineering · doi:10.1016/s1359-4311(02)00192-8 · Cited by 4,738
A review on phase change energy storage: materials and applications
Farid, M. M., Khudhair, A. M., Razack, S. A. K., & Al-Hallaj, S. (2004) · Energy Conversion and Management · doi:10.1016/j.enconman.2003.09.015 · Cited by 3,097
Agyenim, F., Hewitt, N., Eames, P., & Smyth, M. (2010) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2009.10.015 · Cited by 2,072
Review on thermal energy storage with phase change materials (PCMs) in building applications
Zhou, D., Zhao, C. Y., & Tian, Y. (2012) · Applied Energy · doi:10.1016/j.apenergy.2011.08.025 · Cited by 1,896
Low temperature latent heat thermal energy storage: Heat storage materials
Abhat, A. (1983) · Solar Energy · doi:10.1016/0038-092x(83)90186-x · Cited by 1,711
95/03996 Heat pipe science and technology
(1995) · Fuel and Energy Abstracts · doi:10.1016/0140-6701(95)95610-h · Cited by 1,495
Sarı, A., & Karaipekli, A. (2007) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2006.11.004 · Cited by 978
Heat transfer characteristics of thermal energy storage system using PCM capsules: A review
Regin, A. F., Solanki, S. C., & Saini, J. S. (2008) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2007.06.009 · Cited by 945
Liu, M., Saman, W., & Bruno, F. (2012) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2012.01.020 · Cited by 864
Heat pipe science and technology
Vasiliev, L. L. (1996) · International Journal of Heat and Mass Transfer · doi:10.1016/0017-9310(95)00330-4 · Cited by 838
Mohamed, S. A., Al-Sulaiman, F. A., Ibrahim, N. I., Zahir, M. H., Al-Ahmed, A., Saidur, R., Yılbaş, B. S., & Sahin, A. Z. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2016.12.012 · Cited by 759
Self-citationKhodadadi, J. M., & Hosseinizadeh, S. F. (2007) · International Communications in Heat and Mass Transfer · doi:10.1016/j.icheatmasstransfer.2007.02.005 · Cited by 715
Latent Heat Storage Materials and Systems: A Review
Sharma, S. D., & Sagara, K. (2005) · International Journal of Green Energy · doi:10.1081/ge-200051299 · Cited by 714
Performance enhancement in latent heat thermal storage system: A review
Jegadheeswaran, S., & Pohekar, S. D. (2009) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2009.06.024 · Cited by 702
A review on phase-change materials: Mathematical modeling and simulations
Dutil, Y., Rousse, D. R., Salah, N. B., Lassue, S., & Zalewski, L. (2011) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2010.06.011 · Cited by 676
A review on long-term sorption solar energy storage
N’Tsoukpoe, K. E., Liu, H., Le Pierrès, N., & Luo, L. (2009) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2009.05.008 · Cited by 663
Thermal conductivity enhancement of phase change materials using a graphite matrix
Mills, A., Farid, M., Selman, J. R., & Al-Hallaj, S. (2006) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2005.11.022 · Cited by 627
Enhance heat transfer for PCM melting in triplex tube with internal–external fins
Mat, S., Al-Abidi, A. A., Sopian, K., Sulaiman, M. Y., & Mohammad, A. T. (2013) · Energy Conversion and Management · doi:10.1016/j.enconman.2013.05.003 · Cited by 604
Maximization of performance of a PCM latent heat storage system with innovative fins
Sciacovelli, A., Gagliardi, F., & Verda, V. (2015) · Applied Energy · doi:10.1016/j.apenergy.2014.07.015 · Cited by 603
Agyenim, F., Eames, P., & Smyth, M. (2009) · Solar Energy · doi:10.1016/j.solener.2009.04.007 · Cited by 596
Al-Abidi, A. A., Mat, S., Sopian, K., Sulaiman, M. Y., & Mohammad, A. T. (2013) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2013.01.011 · Cited by 562
Comini, G., Guidice, S. D., Lewis, R. W., et al. (1974) · International Journal for Numerical Methods in Engineering · doi:10.1002/nme.1620080314 · Cited by 551
Sarı, A. (2004) · Energy Conversion and Management · doi:10.1016/j.enconman.2003.10.022 · Cited by 526
Transient cooling of electronics using phase change material (PCM)-based heat sinks
Kandasamy, R., Wang, X.-Q., & Mujumdar, A. S. (2008) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2007.06.010 · Cited by 506
Tian, Y., & Zhao, C. Y. (2011) · Energy · doi:10.1016/j.energy.2011.07.019 · Cited by 495
Fan, L.-W., Fang, X., Wang, X., Zeng, Y., Xiao, Y.-Q., Yu, Z.-T., Xu, X., Hu, Y.-C., & Cen, K.-F. (2013) · Applied Energy · doi:10.1016/j.apenergy.2013.04.043 · Cited by 478
Ismail, K. A. R., Alves, C. L. F., & Modesto, M. S. (2001) · Applied Thermal Engineering · doi:10.1016/s1359-4311(00)00002-8 · Cited by 459
Thermal performance enhancement of shell and tube Latent Heat Storage Unit using longitudinal fins
Rathod, M. K., & Banerjee, J. (2015) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2014.10.074 · Cited by 427
Cui, Y., Liu, C., Hu, S., & Yu, X. (2011) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2011.01.021 · Cited by 423
Numerical investigation of a PCM-based heat sink with internal fins
Shatikian, V., Ziskind, G., & Letan, R. (2005) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2004.10.042 · Cited by 420
Ma, T., Yang, H., Zhang, Y., Lu, L., & Wang, X. (2015) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2014.12.003 · Cited by 419
Mesalhy, O., Lafdi, K., Elgafy, A., & Bowman, K. (2005) · Energy Conversion and Management · doi:10.1016/j.enconman.2004.06.010 · Cited by 407
Wang, J., Xie, H., Xin, Z., Li, Y., & Chen, L. (2010) · Solar Energy · doi:10.1016/j.solener.2009.12.004 · Cited by 395
Thermal conductivity enhancement of energy storage media using carbon fibers
Fukai, J., Kanou, M., Kodama, Y., & Miyatake, O. (2000) · Energy Conversion and Management · doi:10.1016/s0196-8904(99)00166-1 · Cited by 395
Al-Abidi, A. A., Mat, S., Sopian, K., Sulaiman, M. Y., & Mohammad, A. T. (2013) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2013.02.030 · Cited by 387
Thermal conductivity enhancement in a latent heat storage system
Mettawee, E.-B. S., & Assassa, G. M. R. (2007) · Solar Energy · doi:10.1016/j.solener.2006.11.009 · Cited by 378
Thermal properties of paraffin based composites containing multi-walled carbon nanotubes
Wang, J., Xie, H., & Xin, Z. (2009) · Thermochimica Acta · doi:10.1016/j.tca.2009.01.022 · Cited by 373
Zhou, D., & Zhao, C. Y. (2011) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2010.11.022 · Cited by 366
Karaipekli, A., Sarı, A., & Kaygusuz, K. (2007) · Renewable Energy · doi:10.1016/j.renene.2006.11.011 · Cited by 364
Hosseinizadeh, S. F., Tan, F. L., & Moosania, S. M. (2011) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2011.07.031 · Cited by 336
Thermal energy storage: “How previous findings determine current research priorities”
Fernandes, D., Pitié, F., Cáceres, G., & Baeyens, J. (2012) · Energy · doi:10.1016/j.energy.2012.01.024 · Cited by 328
VERMA, P., Varun, & Singal, S. K. (2007) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2006.11.002 · Cited by 317
An experimental study of enhanced heat transfer in rectangular PCM thermal storage
Stritih, U. (2004) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2004.02.001 · Cited by 304
Mahmoud, S. M., Tang, A., Toh, C. K., Al-Dadah, R., & Soo, S. L. (2013) · Applied Energy · doi:10.1016/j.apenergy.2013.04.059 · Cited by 299
Tiari, S., Qiu, S., & Mahdavi, M. (2015) · Energy Conversion and Management · doi:10.1016/j.enconman.2014.10.053 · Cited by 296
Shabgard, H., Allen, M. J., Sharifi, N., Benn, S. P., Faghri, A., & Bergman, T. L. (2015) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2015.05.020 · Cited by 293
Lafdi, K., Mesalhy, O., & Shaikh, S. (2007) · Journal of Applied Physics · doi:10.1063/1.2802183 · Cited by 291
Wang, W., Yang, X., Fang, Y., Ding, J., & Yan, J. (2009) · Applied Energy · doi:10.1016/j.apenergy.2008.10.020 · Cited by 287
Thermal conductivity enhancement of Ag nanowires on an organic phase change material
Zeng, J. L., Cao, Z., Yang, D. W., Sun, L. X., & Zhang, L. (2010) · Journal of Thermal Analysis and Calorimetry · doi:10.1007/s10973-009-0472-y · Cited by 281
Zhao, C. Y., & Wu, Z. G. (2011) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2010.09.032 · Cited by 279
Study of the heat transfer behavior of a latent heat thermal energy storage unit with a finned tube
Lacroix, M. (1993) · International Journal of Heat and Mass Transfer · doi:10.1016/s0017-9310(05)80139-5 · Cited by 270
Experimental and numerical study on melting of phase change materials in metal foams at pore scale
Chen, Z., Gao, D., & Shi, J. (2014) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2014.01.003 · Cited by 269
Fang, X., Fan, L.-W., Ding, Q., Wang, X., Yao, X.-L., Hou, J.-F., Yu, Z.-T., Cheng, G.-H., Hu, Y.-C., & Cen, K.-F. (2013) · Energy & Fuels · doi:10.1021/ef400702a · Cited by 261
Adine, H. A., & El Qarnia, H. (2009) · Applied Mathematical Modelling · doi:10.1016/j.apm.2008.05.016 · Cited by 260
Carbon nanoadditives to enhance latent energy storage of phase change materials
Shaikh, S., Lafdi, K., & Hallinan, K. (2008) · Journal of Applied Physics · doi:10.1063/1.2903538 · Cited by 256
Harish, S., Orejon, D., Takata, Y., & Kohno, M. (2015) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2015.01.056 · Cited by 249
Exergy based performance evaluation of latent heat thermal storage system: A review
Jegadheeswaran, S., Pohekar, S. D., & Kousksou, T. (2010) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2010.07.051 · Cited by 248
Velraj, R., Seeniraj, R. V., Hafner, B., Faber, C., & Schwarzer, K. (1997) · Solar Energy · doi:10.1016/s0038-092x(96)00167-3 · Cited by 242
Thermal conductivity measurement of a PCM based storage system containing carbon fibers
Frusteri, F., Leonardi, V., Vasta, S., & Restuccia, G. (2005) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2004.10.007 · Cited by 242
High temperature latent heat thermal energy storage using heat pipes
Shabgard, H., Bergman, T. L., Sharifi, N., & Faghri, A. (2010) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2010.03.035 · Cited by 242
Farid, M. M., & Kanzawa, A. (1989) · Journal of Solar Energy Engineering · doi:10.1115/1.3268301 · Cited by 242
Heat transfer enhancement of paraffin wax using graphite foam for thermal energy storage
Zhong, Y., Guo, Q., Li, S., Shi, J., & Liu, L. (2010) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2010.02.004 · Cited by 234
Numerical investigation of a PCM-based heat sink with internal fins: Constant heat flux
Shatikian, V., Ziskind, G., & Letan, R. (2008) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2007.11.036 · Cited by 230
Comparison of finite element techniques for solidification problems
Dalhuijsen, A. J., & Śegal, A. (1986) · International Journal for Numerical Methods in Engineering · doi:10.1002/nme.1620231003 · Cited by 213
Peiró, G., Gasia, J., Miró, L., & Cabeza, L. F. (2015) · Renewable Energy · doi:10.1016/j.renene.2015.05.029 · Cited by 211
Li, T., Lee, J.-H., Wang, R., & Kang, Y. T. (2013) · Energy · doi:10.1016/j.energy.2013.04.010 · Cited by 210
Enhancement of latent heat energy storage using embedded heat pipes
Robak, C. W., Bergman, T. L., & Faghri, A. (2011) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2011.03.038 · Cited by 210
Effects of different multiple PCMs on the performance of a latent thermal energy storage system
Fang, M., & Chen, G. (2007) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2006.08.001 · Cited by 210
Thermal performance of a multiple PCM thermal storage unit for free cooling
Mosaffa, A. H., Infante Ferreira, C. A., Talati, F., & Rosen, M. A. (2013) · Energy Conversion and Management · doi:10.1016/j.enconman.2012.10.018 · Cited by 206
Yu, Z.-T., Fang, X., Fan, L.-W., Wang, X., Xiao, Y.-Q., Zeng, Y., Xu, X., Hu, Y.-C., & Cen, K.-F. (2013) · Carbon · doi:10.1016/j.carbon.2012.10.059 · Cited by 203
SWAMINATHAN, C. R., & VOLLER, V. R. (1993) · International Journal of Numerical Methods for Heat & Fluid Flow · doi:10.1108/eb017528 · Cited by 197
Phase Change Heat Transfer Enhancement Using Copper Porous Foam
Siahpush, A., O’Brien, J., & Crepeau, J. (2008) · Journal of Heat Transfer · doi:10.1115/1.2928010 · Cited by 196
Zhao, D., & Tan, G. (2015) · Applied Energy · doi:10.1016/j.apenergy.2014.10.051 · Cited by 193
Numerical simulation of a latent heat thermal energy storage system with enhanced heat conduction
Costa, M., Buddhi, D., & Oliva, A. (1998) · Energy Conversion and Management · doi:10.1016/s0196-8904(96)00193-8 · Cited by 191
Numerical study of PCM solidification in a finned tube thermal storage including natural convection
Jmal, I., & Baccar, M. (2015) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2015.03.065 · Cited by 188
Choi, D. H., Lee, J., Hong, H., & Kang, Y. T. (2014) · International Journal of Refrigeration · doi:10.1016/j.ijrefrig.2014.02.004 · Cited by 187
Enhancement of Heat Transfer in Latent Heat Storage Modules with Internal Fins
Gharebaghi, M., & Sezai, I. (2007) · Numerical Heat Transfer, Part A: Applications · doi:10.1080/10407780701715786 · Cited by 186
Effect of carbon-fiber brushes on conductive heat transfer in phase change materials
Fukai, J., Hamada, Y., Morozumi, Y., & Miyatake, O. (2002) · International Journal of Heat and Mass Transfer · doi:10.1016/s0017-9310(02)00179-5 · Cited by 186
Ho, C. J., & Gao, J. Y. (2013) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2013.02.065 · Cited by 183
Enhancement of PCM melting in enclosures with horizontally-finned internal surfaces
Sharifi, N., Bergman, T. L., & Faghri, A. (2011) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2011.05.027 · Cited by 179
Experimental and numerical investigation of thermal energy storage with a finned tube
Erek, A., ?lken, Z., & Acar, M. A. (2005) · International Journal of Energy Research · doi:10.1002/er.1057 · Cited by 174
Zhang, P., Xiao, X., Meng, Z. N., & Li, M. (2015) · Applied Energy · doi:10.1016/j.apenergy.2014.10.004 · Cited by 173
Zhong, Y., Li, S., Wei, X., Liu, Z., Guo, Q., Shi, J., & Liu, L. (2010) · Carbon · doi:10.1016/j.carbon.2009.09.033 · Cited by 170
Kumaresan, V., Velraj, R., & Das, S. K. (2012) · Heat and Mass Transfer · doi:10.1007/s00231-012-0980-3 · Cited by 170
Zhong, L., Zhang, X., Luan, Y., Wang, G., Feng, Y., & Feng, D. (2014) · Solar Energy · doi:10.1016/j.solener.2014.05.019 · Cited by 168
Thermal conductivity improvement of phase change materials/graphite foam composites
Moeini Sedeh, M., & Khodadadi, J. M. (2013) · Carbon · doi:10.1016/j.carbon.2013.04.004 · Cited by 167
Sanusi, O., Warzoha, R., & Fleischer, A. S. (2011) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2011.04.046 · Cited by 167
Kurnia, J. C., Sasmito, A. P., Jangam, S. V., & Mujumdar, A. S. (2013) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2012.08.015 · Cited by 162
Performance enhancement of a solar dynamic LHTS module having both fins and multiple PCMs
Seeniraj, R. V., & Narasimhan, N. L. (2007) · Solar Energy · doi:10.1016/j.solener.2007.11.001 · Cited by 159
A comprehensive numerical model for melting with natural convection
Wang, S., Faghri, A., & Bergman, T. L. (2010) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2009.12.057 · Cited by 158
Fukai, J., Hamada, Y., Morozumi, Y., & Miyatake, O. (2003) · International Journal of Heat and Mass Transfer · doi:10.1016/s0017-9310(03)00290-4 · Cited by 150
Liu, Z., Sun, X., & Ma, C. (2004) · Energy Conversion and Management · doi:10.1016/j.enconman.2004.05.012 · Cited by 149
Analysis of geometrical and operational parameters of PCM in a fin and tube heat exchanger
Rahimi, M., Ranjbar, A. A., Ganji, D. D., Sedighi, K., Hosseini, M. J., & Bahrampoury, R. (2014) · International Communications in Heat and Mass Transfer · doi:10.1016/j.icheatmasstransfer.2014.02.025 · Cited by 147
Analysis and optimization of a latent thermal energy storage system with embedded heat pipes
Nithyanandam, K., & Pitchumani, R. (2011) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2011.06.018 · Cited by 146
Research Progress of Phase Change Materials (PCMs) Embedded with Metal Foam (a Review)
Chen, J., Yang, D., Jiang, J., Ma, A., & Song, D. (2014) · Procedia Materials Science · doi:10.1016/j.mspro.2014.07.579 · Cited by 145
Shabgard, H., Robak, C. W., Bergman, T. L., & Faghri, A. (2012) · Solar Energy · doi:10.1016/j.solener.2011.12.008 · Cited by 144
(1998) · Fuel and Energy Abstracts · doi:10.1016/s0140-6701(98)97712-8 · Cited by 143
Zhang, N., Yuan, Y., Yuan, Y., Cao, X., & Yang, X. (2014) · Solar Energy · doi:10.1016/j.solener.2014.09.003 · Cited by 142
Duan, Z.-J., Zhang, H.-Z., Sun, L., Cao, Z. Y., Xu, F., Zou, Y., Chu, H., Qiu, S., Xiang, C., & Zhou, H. (2013) · Journal of Thermal Analysis and Calorimetry · doi:10.1007/s10973-013-3311-0 · Cited by 141
Xiao, X., Zhang, P., & Li, M. (2015) · Energy Conversion and Management · doi:10.1016/j.enconman.2015.07.074 · Cited by 140
Experimental and theoretical analysis of an aluminum foam enhanced phase change thermal storage unit
Fleming, E., Wen, S., Shi, L., & da Silva, A. K. (2014) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2014.11.022 · Cited by 140
Farid, M. M., Kim, Y., & Kansawa, A. (1990) · Journal of Solar Energy Engineering · doi:10.1115/1.2929644 · Cited by 140
Effects of MWNTs on phase change enthalpy and thermal conductivity of a solid-liquid organic PCM
Zeng, J., Cao, Z. Y., Yang, D. W., Xu, F., Sun, L. X., Zhang, X., & Zhang, L. (2009) · Journal of Thermal Analysis and Calorimetry · doi:10.1007/s10973-008-9275-9 · Cited by 135
Liu, Z., Wang, Z., & Ma, C. (2005) · Energy Conversion and Management · doi:10.1016/j.enconman.2005.06.004 · Cited by 133
Tiari, S., & Qiu, S. (2015) · Energy Conversion and Management · doi:10.1016/j.enconman.2015.08.004 · Cited by 130
Bayón, R., Rojas, E., Valenzuela, L., Zarza, E., & León, J. (2010) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2010.07.011 · Cited by 127
Nithyanandam, K., & Pitchumani, R. (2012) · Applied Energy · doi:10.1016/j.apenergy.2012.09.056 · Cited by 126
Effects of copper nanowires on the properties of an organic phase change material
Zeng, J., Zhu, F., Yu, S., Zhu, L., Cao, Z. Y., Sun, L., Deng, G.-R., Yan, W.-P., & Zhang, L. (2012) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2012.06.013 · Cited by 126
Experimental investigations of porous materials in high temperature thermal energy storage systems
Wu, Z. G., & Zhao, C.-Y. (2011) · Solar Energy · doi:10.1016/j.solener.2011.03.021 · Cited by 126
Heat pipe-assisted melting of a phase change material
Sharifi, N., Wang, S., Bergman, T. L., & Faghri, A. (2012) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2012.03.023 · Cited by 121
Li, Z., Sun, W., Wang, G., & Wu, Z. G. (2014) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2014.06.023 · Cited by 114
Fan, L., Xiao, Y., Zeng, Y. D., Fang, X., Wang, X., Xu, X., Yu, Z., Hong, R.-H., Hu, Y.-C., & Cen, K. (2013) · International Journal of Thermal Sciences · doi:10.1016/j.ijthermalsci.2013.03.015 · Cited by 113
Hamada, Y., Ohtsu, W., & Fukai, J. (2003) · Solar Energy · doi:10.1016/j.solener.2003.07.028 · Cited by 113
Tao, Y. B., He, Y. L., & Qu, Z. (2012) · Solar Energy · doi:10.1016/j.solener.2012.01.004 · Cited by 113
Motahar, S., Nikkam, N., Alemrajabi, A. A., Khodabandeh, R., Toprak, M. S., & Muhammed, M. A. (2014) · International Communications in Heat and Mass Transfer · doi:10.1016/j.icheatmasstransfer.2014.10.016 · Cited by 109
Horbaniuc, B., Dumitrașcu, G., & Popescu, A. (1999) · Energy Conversion and Management · doi:10.1016/s0196-8904(99)00069-2 · Cited by 107
Energy and exergy evaluation of a multiple-PCM thermal storage unit for free cooling applications
Mosaffa, A. H., Farshi, L. G., Ferreira, C. A. I., & Rosen, M. A. (2014) · Renewable Energy · doi:10.1016/j.renene.2014.02.025 · Cited by 105
Numerical Investigation of PCM Based Heat Sinks with Embedded Metal Foam/Crossed Plate Fins
Srivatsa, P. V. S. S., Baby, R., & Balaji, C. (2014) · Numerical Heat Transfer Part A Applications · doi:10.1080/10407782.2014.894371 · Cited by 96
Li, Z., & Wu, Z. (2013) · Solar Energy · doi:10.1016/j.solener.2013.11.017 · Cited by 96
Transient performance of a PCM-based heat sink with high aspect-ratio carbon nanofillers
Fan, L., Zhu, Z.-Q., Zeng, Y. D., Xiao, Y., Liu, X., Wu, Y., Ding, Q. W., Yu, Z., & Cen, K. (2014) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2014.10.050 · Cited by 94
Performance assessment of heat storage by phase change materials containing MWCNTs and graphite
Teng, T.-P., Cheng, C.-M., & Cheng, C.-P. (2012) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2012.07.002 · Cited by 93
Heat Transfer Enhancement in a Paraffin Wax Thermal Storage System
Eftekhar, J., Haji-Sheikh, A., & Lou, D. Y. S. (1984) · Journal of Solar Energy Engineering · doi:10.1115/1.3267599 · Cited by 93
Phase change material developments: a review
Riffat, S., Mempouo, B., & Fang, W. (2013) · International Journal of Ambient Energy · doi:10.1080/01430750.2013.823106 · Cited by 93
Melting and solidification enhancement using a combined heat pipe, foil approach
Sharifi, N., Bergman, T. L., Allen, M. J., & Faghri, A. (2014) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2014.07.054 · Cited by 92
Liu, Z., Wang, Z., & Ma, C. (2005) · Energy Conversion and Management · doi:10.1016/j.enconman.2005.06.007 · Cited by 91
Outward phase change in a cylindrical annulus with axial fins on the inner tube
Padmanabhan, P. V., & Murthy, M. V. K. (1986) · International Journal of Heat and Mass Transfer · doi:10.1016/0017-9310(86)90004-9 · Cited by 87
Thermal performance analysis for a heat receiver using multiple phase change materials
Cui, H., Yuan, X., & Hou, X. (2003) · Applied Thermal Engineering · doi:10.1016/s1359-4311(03)00210-2 · Cited by 86
Cyclic heat transfer in a novel storage unit of multiple phase change materials
Gong, Z., & Mujumdar, A. S. (1996) · Applied Thermal Engineering · doi:10.1016/1359-4311(95)00088-7 · Cited by 86
Thermal properties of heat storage composites containing multiwalled carbon nanotubes
Wang, J., Xie, H., & Xin, Z. (2008) · Journal of Applied Physics · doi:10.1063/1.3041495 · Cited by 84
Allen, M. J., Sharifi, N., Faghri, A., & Bergman, T. L. (2014) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2014.09.071 · Cited by 84
Domański, R., & Fellah, G. M. (1996) · Applied Thermal Engineering · doi:10.1016/1359-4311(96)00003-8 · Cited by 83
Enhanced heat transfer for PCM melting in the frustum-shaped unit with multiple PCMs
Hu, Z., Li, A., Gao, R., & Yin, H. (2015) · Journal of Thermal Analysis and Calorimetry · doi:10.1007/s10973-014-4370-6 · Cited by 81
Nakaso, K., Teshima, H., Yoshimura, A., Nogami, S., Hamada, Y., & Fukai, J. (2007) · Chemical Engineering and Processing - Process Intensification · doi:10.1016/j.cep.2007.02.001 · Cited by 74
Design of a latent thermal energy storage system with embedded heat pipes
Nithyanandam, K., & Pitchumani, R. (2014) · Applied Energy · doi:10.1016/j.apenergy.2014.03.025 · Cited by 71
Theoretical and experimental investigation of plate screen mesh heat pipe solar collector
Brahim, T., Dhaou, M. H., & Jemni, A. (2014) · Energy Conversion and Management · doi:10.1016/j.enconman.2014.07.041 · Cited by 71
Review on Heat Transfer Mechanisms and Characteristics in Encapsulated PCMs
Liu, S., Li, Y., & Zhang, Y. (2014) · Heat Transfer Engineering · doi:10.1080/01457632.2015.965093 · Cited by 69
Computational Studies on Metal Foam and Heat Pipe Enhanced Latent Thermal Energy Storage
Nithyanandam, K., & Pitchumani, R. (2013) · ASME Journal of Heat and Mass Transfer · doi:10.1115/1.4026040 · Cited by 66
Jung, E. G., & Boo, J. H. (2013) · Solar Energy · doi:10.1016/j.solener.2013.11.008 · Cited by 61
Theoretical analysis of triple concentric-tube heat exchangers Part 2: Case studies
Ünal, A. (2001) · International Communications in Heat and Mass Transfer · doi:10.1016/s0735-1933(01)00231-7 · Cited by 58
Shabgard, H., Faghri, A., Bergman, T. L., & Andraka, C. E. (2013) · Journal of Solar Energy Engineering · doi:10.1115/1.4025973 · Cited by 53
A strong enthalpy formulation for the Stefan problem
Date, A. W. (1991) · International Journal of Heat and Mass Transfer · doi:10.1016/0017-9310(91)90049-k · Cited by 44
Performance of suspended finned heat pipes in high-temperature latent heat thermal energy storage
Khalifa, A., Tan, L., Date, A., & Akbarzadeh, A. (2015) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2015.02.030 · Cited by 43
Numerical approach to describe the phase change of an inorganic PCM containing carbon fibres
Frusteri, F., Leonardi, V., & Maggio, G. (2006) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2006.01.018 · Cited by 40
Liu, Z., Zheng, B.-C., Wang, Q., & Li, S.-S. (2015) · Energy · doi:10.1016/j.energy.2015.01.025 · Cited by 39
Investigation on thermal properties of heat storage composites containing carbon fibers
Wang, J., Xie, H., Xin, Z., Li, Y., & Yin, C. (2011) · Journal of Applied Physics · doi:10.1063/1.3656991 · Cited by 38
Anisotropic heat transfer in composites based on high-thermal conductive carbon fibers
Hamada, Y., Otsu, W., Fukai, J., Morozumi, Y., & Miyatake, O. (2004) · Energy · doi:10.1016/j.energy.2004.04.024 · Cited by 38
Exergy analysis of particle dispersed latent heat thermal storage system for solar water heaters
Jegadheeswaran, S., & Pohekar, S. D. (2010) · Journal of Renewable and Sustainable Energy · doi:10.1063/1.3427221 · Cited by 32
Melting enhancement of a phase change material with presence of a metallic mesh
Shuja, S. Z., Yilbaş, B. S., & Shaukat, M. M. (2015) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2015.01.033 · Cited by 30
A fuzzy programming approach to energy resource allocation
Chedid, R. B., Mezher, T. M., & Jarrouche, C. (1999) · International Journal of Energy Research · doi:10.1002/(sici)1099-114x(19990325)23:4<287::aid-er476>3.0.co;2-k · Cited by 29
An improved PCM heat storage technology utilizing metal foam
Dukhan, N., & Bodke, S. (2010) · I-THERM :/I-THERM - Intersociety Conference on Thermal Phenomena in Electronic Systems · doi:10.1109/itherm.2010.5501364 · Cited by 25
Analytical and experimental investigation of melting heat transfer
Wen, C., Sheffield, J., O'DELL, M., et al. (1989) · Journal of Thermophysics and Heat Transfer · doi:10.2514/3.28779 · Cited by 13
Jegadheeswaran, S., Pohekar, S. D., & Kousksou, T. (2011) · CLEAN - Soil Air Water · doi:10.1002/clen.201000584 · Cited by 11
Cited by
Recent developments in phase change materials for energy storage applications: A review
Nazir, H., Batool, M., Bolivar Osorio, F. J., Isaza-Ruiz, M., Xu, X., Vignarooban, K., Phelan, P., Inamuddin, & Kannan, A. M. (2019) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2018.09.126 · Cited by 1,522
Lin, Y., Jia, Y., Alva, G., & Fang, G. (2018) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.10.002 · Cited by 910
Huang, X., Chen, X., Li, A., Atinafu, D., Gao, H., Dong, W., & Wang, G. (2019) · Chemical Engineering Journal · doi:10.1016/j.cej.2018.09.013 · Cited by 701
A review of phase change material and performance enhancement method for latent heat storage system
Tao, Y. B., & He, Y.-L. (2018) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2018.05.028 · Cited by 633
A review on recent progress, challenges and perspective of battery thermal management system
Lin, J., Liu, X., Li, S., Zhang, C., & Yang, S. (2021) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2020.120834 · Cited by 588
Metadata
- Authors
- Ibrahim, N. I., Al-Sulaiman, F. A., Rahman, S., Yilbas, B. S., & Sahin, A. Z.
- Venue
- Renewable and Sustainable Energy Reviews
- Publisher
- Elsevier BV
- Published
- 2017-07
- Volume
- 74
- Pages
- 26-50
- ISSN
- 1364-0321 (ISSN-L)
- OpenAlex
- W2588129681
- Cited by
- 580
- References
- 153
- FWCI
- 43.04
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.