The DOI matches its Crossref record; 12 of the 12 references it cites were found in a registry or an index.
Wet torrefaction of biomass for high quality solid fuel production: A review
Abstract
Abstract Wet torrefaction (WT) is a sustainable subcritical water pretreatment technology to upgrade moist biomass into hydrochar solid fuel with superior fuel properties with the avoidance of energy-intensive conventional thermal drying. In order to obtain a holistic understanding of WT processing system, this review has comprehensively discussed recent advances in WT of biomass to produce high quality solid fuel and its subsequent thermochemical applications. This review has not only summarized distinct advantages of WT over dry torrefaction of biomass with high moisture content but also clarified the similarities and differences between WT and hydrothermal carbonization. According to structures and chemical compositions of components therein, four representative categories of diverse biomass materials were selected to describe the influence of intrinsic nature of biomass on fuel quality of hydrochar derived from WT. Furthermore, this article has attempted to figure out the inherent relationship between WT conditions and fuel properties with respect to operating conditions (e.g. temperature, pressure, and residence time), biomass to water ratio, acids and additives, torrefaction atmosphere, and heating techniques. Three conventional thermochemical applications of wet-torrefied biomass have been extensively reviewed to reveal that WT could benefit energy recovery from wet biomass in terms of improved quality of ultimate energy carriers and obviously reduced pollutants emissions. Nevertheless, critical concerns associated with optimization of operating cost, minimization and controlling of pollutants emissions, re-design of industrially applicable reactor, and system integration with downstream applications have been pointed out in order to make WT technology more environmentally and commercially viable.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Hydrolysis of lignocellulosic materials for ethanol production: a review
Sun, Y., & Cheng, J. (2002) · Bioresource Technology · doi:10.1016/s0960-8524(01)00212-7 · Cited by 6,070
An overview of the chemical composition of biomass
Vassilev, S. V., Baxter, D., Andersen, L. K., & Vassileva, C. G. (2010) · Fuel · doi:10.1016/j.fuel.2009.10.022 · Cited by 2,519 · cited 3×
“perature ash (Data are adapted from [62]).”
BackgroundFunke, A., & Ziegler, F. (2010) · Biofuels Bioproducts and Biorefining · doi:10.1002/bbb.198 · Cited by 2,001
Hydrothermal conversion of biomass waste to activated carbon with high porosity: A review
Jain, A., Balasubramanian, R., & Srinivasan, M. P. (2016) · Chemical Engineering Journal · doi:10.1016/j.cej.2015.08.014 · Cited by 1,199
Chemical properties of solid biofuels—significance and impact
Obernberger, I., Brunner, T., & Bärnthaler, G. (2006) · Biomass and Bioenergy · doi:10.1016/j.biombioe.2006.06.011 · Cited by 774
Hydrothermal carbonization: Fate of inorganics
Reza, M. T., Lynam, J. G., Uddin, M. H., & Coronella, C. J. (2013) · Biomass and Bioenergy · doi:10.1016/j.biombioe.2012.12.004 · Cited by 492
Upgrading biomass fuels via wet torrefaction: A review and comparison with dry torrefaction
Bach, Q.-V., & Skreiberg, Ø. (2016) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2015.10.014 · Cited by 431
Self-citationKostas, E. T., Beneroso, D., & Robinson, J. P. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.03.135 · Cited by 319
Acetic acid and lithium chloride effects on hydrothermal carbonization of lignocellulosic biomass
Lynam, J. G., Coronella, C. J., Yan, W., Reza, M. T., & Vasquez, V. R. (2011) · Bioresource Technology · doi:10.1016/j.biortech.2011.02.035 · Cited by 260
Volpe, M., & Fiori, L. (2017) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2017.02.022 · Cited by 237 · cited 4×
“To obtain solid fuel with similar thermochemical properties from olive tree trimmings (OT) and olive pulp (OP), WT required lower temperature of 50 °C than low temperature pyrolysis [19].”
BackgroundInfluentialMäkelä, M., Benavente, V., & Fullana, A. (2015) · Applied Energy · doi:10.1016/j.apenergy.2015.06.022 · Cited by 225
Recent advances in acid- and base-catalyzed organic synthesis in high-temperature liquid water
Hunter, S. E., & Savage, P. E. (2004) · Chemical Engineering Science · doi:10.1016/j.ces.2004.09.009 · Cited by 128 · cited 1×
“Due to the effect of CO2 on decarboxylation [72], dehydration, alkylation [73], hydration [74], and hydrolysis [75] reactions in HTW, it is postulated that CO2 atmosphere may also affect the performance of WT of biomass and hydrochar fuel properties to some extent.”
Background
Cited by
Kumar, R., Strezov, V., Weldekidan, H., He, J., Singh, S., Kan, T., & Dastjerdi, B. (2020) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2020.109763 · Cited by 542
Catalytic thermochemical conversion of biomass for biofuel production: A comprehensive review
Ong, H. C., Chen, W.-H., Farooq, A., Gan, Y. Y., Lee, K. T., & Ashokkumar, V. (2019) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2019.109266 · Cited by 448
Sarker, T. R., Pattnaik, F., Nanda, S., Dalai, A. K., Meda, V., & Naik, S. (2021) · Chemosphere · doi:10.1016/j.chemosphere.2021.131372 · Cited by 365
A review of densified solid biomass for energy production
Bajwa, D. S., Peterson, T., Sharma, N., Shojaeiarani, J., & Bajwa, S. G. (2018) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2018.07.040 · Cited by 323
Zhuang, X., Zhan, H., Song, Y., He, C., Huang, Y., Yin, X., & Wu, C. (2019) · Fuel · doi:10.1016/j.fuel.2018.09.019 · Cited by 298
Self-citation
Metadata
- Authors
- He, C., Tang, C., Li, C., Yuan, J., Tran, K.-Q., Bach, Q.-V., Qiu, R., & Yang, Y.
- Venue
- Renewable and Sustainable Energy Reviews
- Publisher
- Elsevier BV
- Published
- 2018-08
- Volume
- 91
- Pages
- 259-271
- ISSN
- 1364-0321 (ISSN-L)
- OpenAlex
- W2797174171
- Cited by
- 239
- References
- 12
- FWCI
- 8.12
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.